Quantity Reversal and Process Order Cancellation

Dear SAPians,
                          I have a problem in Cancellation of Process order after doing the reversal of Quantity after UD thru following steps :-
1.Assign Inspection Type u201808u2019 in the Material master thru T-Code u2018MM02u2019 & Save.
2.Go to   MB1B & Make Transfer Posting Thru Movt. Type u2018322u2019 and SAVE.
3. Now we tried to cancel the process order but system is displaying an error 'Quantity is Partially posted in UD' and we are unable to cancel the process order
Please Help
Thanks in Advance.

Hi
Reversal of Ud is not possible in normal way as per std  SAP.
either you have to implement User exit for the same ( avaialable after 4.6 C version)
Or do as follows:
Go to MIGO
selct GR for order & input your ordernumber in the field .
select Mov.type 102 & slect unrestristed stock in where tab.
Then check & save the transaction.
Then Qty will be revrsed.
Then you can do Process order cancellation.what ever you want.
Pl. try.
Regards
YMREDDY

Similar Messages

  • Total Quantity generated from Process Order

    Dear Experts,
        Can you help me on how to find the total quantity generated from process order.
    Example: I want to see for a particular material what is the total quantity converted in COR6N for a particular period.
    Thanks

    Got the report from COOISPI items list. Thanks

  • Get the supply source of planned order and process order.

    Hi experts,
    I would like to display production version (supply source) on prduct view.
    But, I don't know that how to get supply source of planned order and process order.
    APO  table is complax.
    Do you know that?
    Regards,
    Satoru

    Hello Tushar,
    Are components also plan in APO with MRP type X0?
    Does PDS or PPM contain all the components?
    Verify if the component is maintained properly in the PDS.
    Check whether there is an active integration model for the components, also execute the RAPOKZFX report for all the materials in question.
    When you convert the PPDS order to process order then conversion happens in ECC/R/3 system. This is the place BOM has to be reexploded in ECC. Please check if you have any enhancement which restrict BOM explosion. 
    Also check OSS note 1576703 suggested by an expert Caetano.
    Best Regards,
    R.Brahmankar

  • Process order cancellation or reversal after sales order delivery has b

    hi,
    here we got one issue as user made mistake in assigning profit center in the material master of a material. when the process order execution is over, delivery has been done for a sales order. then user came to know that documents generated in the profit center assigned in the material master. but actually another profit center is supposed to be assigned.
    now can we do something to change in PP to effect the profit center documents in this stage.
    can any one of you suggest good solution, i will be thankful to you
    regards

    Hi
    yes you can revoke closing of process order
    Go to Cor3 go to process order header
    process order >>> functions >> restrict processing >>> Revoke closing
    again go to Process order >> functions >> restrict processing >> revoke Tech. completion
    after tht you can change your profit center
    Please reward points
    Sunil

  • Regarding goods issue (reversal) against process order

    Dear friends,
    Recently i have noticed one strange thing in SAP.I have created one process order and against it i have done the confirmation.Now when i go to Transaction code mb1a and select movement type 262 (Goods Issue to process order-reversal) and give the storage location and in next screen i gave order number,material code and its qty.These material code is not maintained in the bom of order header material.And even in process order in material tab we haven't maintained this material.Also while doing the confirmation in goods movement we haven't maintained this material.Then also system allows me to do so.Which means material which i haven't issued against the process order, system is allowing me to do its reversal i.e (262).because of which system is creating the stock for that material, which is not correct.
    Can we control this behaviour of system.
    Thanking you guys in advance.

    Hi Jitendra,
    This is fact and there is no standard Control available for the same.Only thing you can do is put control over Movement type 262 or try it by implementing User Exit.
    I am not sure but you can use Enhancement CCOWB001 - Customer exit for modifying menu entries.
    Include is LXCOWBF01.
    Regards,
    Dhaval

  • CO and Process order without material using T. Code CORO

    Hi
    We need to use Process Order without material functionality for recording "changeover" time and cost (i.e. setting up process for production of other material in a production line).
    For this purpose we have configured a separate process order type. We have created a separate activity for Changeover and planned rates using KP26.
    Now we create Process Order without material using T. Code CORO and confirm it using COR6N. On confirmation system successfully credits Cost Center.
    We need to know:
    1) whether we should settle the process order as well or no need to assign settlement profile to Order Type
    2) Or should we run Cost Estimate first.
    Plz help, if any have idea

    Thank you all for your valuable input.
    Srinivasa, your suggestion is very good, especially when calculation of variances/WIP is required. But again as there is no cost relevant material where the WIP/Variances will be settled during settlement process?
    1) PP need to create process order without material because changeover cost should not be charged to either material and capacity hours are consumed during changeover. 2) CO need to identify the cost of changeover which should be charged to cost center. So far we have achieved both of these two objectives by the following activities:
    Creation of Process Order without material using CORO T.Code     say 3 hours of changeover occurred we create order with quantity of 3 Hours. And confirmation of activities quantity 3 using COR6N so cost center is credited by 3 x rate per hour. As there is a separate Process Order type for Changeover we can identify changeover quantity and cost in a given period.
    After contributors feedback in this thread I have come to conclusion that I don't need to assign Settlement Profile and PA Structure to Changeover Process Order type. So no need to run Process Order settlement. As there is no specific required for Changeover WIP/Variances as well.

  • Quantity Change At process order?

    Dear Guruji
    I am Realse Process order as per Std BOM. But at conformation Tranziction I am Changed Planed Quantity.How Can I tressiblae That only that Process order Which is change in planed quantity at Goods Issue?

    Dear,
    There is no tracking mechanism in SAP. If you dont want users to change the component during confirmation, then you create a transaction variant for CO11N transaction, and define in such a way that Component quantity field is greyed out and also delete button is also removed.
    If you search this Forum you will find suitable threads explaining the process of creating transaction variants.
    Regards,
    Prasobh

  • Text in PI Sheet and Process Order did not match

    Dear Sir,
    We are going to upgrade to our system from 4.7 to ECC6.
    We have a problem with PI Sheets with the Long text. The text instruction shown in the PI sheet is not matching with the long text put in the Process Order and Master Receipe.
    We are using the Process Instruction Category  "INST" and we are puting long text for instruction for this in the Master Receipe. At the time for creation of Process Order this Process instruction Category fatch correct value of long text from the Master Receipe after released the Process Order, Control Recipe generated for the same Process Order. But when we are going to process these Control Receipe from the T-Code CO60, We find the some different text for the "INST".
    This problem is not for one Material and Plant Specific.
    Thanks and Regards,
    Gaurav Kumar
    Application Consultant SAP PP
    Mobile +91 9971003631

    Hello Gaurav,
      There might be another possibility, make sure if you make any changes in the Control Recipe Destination program or user exit to populate the long text while sending the CR to the destination to reflect with the PO/Master Recipe.
    with best regards
    K. Mohan Reddy

  • Delivered Quantity problem in Process Order

    Hi,
    I m facing a following situation:
    Current Situation:
    Process order # 10000
    Order Qty 100
    Del Qty 650
    Order finally delivered
    Using auto GR functionality
    Usage decision has been posted for that batch
    Delivery against sales has been made of that batch
    Requirement:
    Now, we realize 350 Pc's are produced against that process order number, we are in the situation to reverese all the entries but want to record the remaining qty in the process order
    Your guidance will highly be appreciated in this regard.

    Hi,
    Your query is not clear. After UD, you have made Outbound delivery also for the batch???
    Also there is wrong practice, first of all your order qty is 100 but you have posted GR of 650. As per standard SAP, it is not recommended practice. You should post it as 100 only & if you want to post more qty against same order you should change Process Order qty to 650.
    Further you have not specified why you want to reverse all activities? is this batch came back from customer i.e. customer complaint or any other reason? pls clarify.
    Regards,
    Tejas

  • Reward Certificates And Pre Order Cancel

    Hello. I previously pre ordered Evolve using a 10 dollar reward certificate. I hardly cancel pre orders so this has never happened to me. I was wondering if I canceled it would I lose the 10 dollar reward certifcate? I pre ordered it awhile back so I'm sure it's expired. I plan on ordering another game right away with it and the money I had down on the pre order. I've completely lost interest in Evolve. After seeing the all the future dlc costs I don't care much about this game anymore.

    Good morning BrennanP,
    Thank you for taking the time to post your question to the forum.
    While the $10 certificate you applied to your Evolve pre-order may have expired, the point value ($10 = 500 points) should repost to your My Best Buy™ account 3 to 6 business days after you cancel the pre-order.  The certificate would have been considered fulfilled when it was applied to the pre-order, so the expiration date should not come into play.
    If for some reason you do not see 500 points repost to your account after 6 business days or if you placed the pre-order on BestBuy.com and want help cancelling it, then please feel free to send me a private message and I will see what I can do to help.  You can send a private message by clicking on the blue button in my signature labeled "Private Message."
    Returns When a My Best Buy™ Certificate was Used
    I hope you have a wonderful day!
    Derek|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Planned Orders and Process Orders Data Extractor

    Hi,
    I am working on extracting process order and Planned Orders data into BW. I could not find any standard DataSources available for my req, so I want to develop generic extractor. the main key figures are Actual Labor and Machine Hours, Target Labor and Machine hours.
    Could you please help me if there are any standard datasource available or ECC tables to pull the data or any standard function modules available?
    Thanks,
    Hanuma

    hi,
    hope the mfg datasources were useful.
    chk the LBWE -> application 4 -> chk the DS 2lis_04_P_arbpl,2LIS_04_Matnr etc...
    All R/3 Tables
    http://www.sap-img.com/sap-download/sap-tables.zip
    Generic Extraction
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
    LO Extraction:
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    Ramesh

  • Enabling Xsteps in master recipe and process order

    Hi experts,
    I am trying to enable the Xsteps by assigning 'Xsteps' in Master recipe profile. But Xsteps tab is not getting enabled in master recipe. I think this is the only one setting to activate Xstep. Can anybody help me on this.? IS this a technical issue(Something related to basis?)
    Similarly I dont see the Xsteps tab in process order also. Is the SAP version a reason for this. I think Xsteps functionality are available from 4.7 onwards.
    Can anybody help me on this please?
    Thanks in advance.

    Dear experts,
    I encounter the same problem of Prathib. I'm working on ECC 6.0 and would like to use Xsteps. The repository is available (R/3 Enterprise SCM Extension 2.0 is imported) and I created several xsteps but i cannot imprt them in the master recipe because the button "Xsteps" is not active in C202, even the recipe profile is correctly set to PI01_XS.
    All SAP notes i found (01466 and 607815) are referring to 4.7 and are correctly implemented in my system. So the customizing and extensions are in place, but the button "Xsteps" is not active.
    Can anybody help and suggest further settings i need to do in order to use xsteps?
    Thanks & Regards.

  • Process order cancellation error

    Dear all,
    I was not able to delete the process order due to the status of ORRQ,
    Kindly please let me know how to process.
    Regards
    Rajasekaran

    Hi Rajasekaran,
    Option 1
    Go to BS22
    Select the id I0278 - LVMS
    Make the selection option to allowed from disallowed
    Now you can set the deletion flag.
    Option 2
    You can make the status ORAC from ORRQ, by running the transaction COAA or COPA. Order record will be archived during this process. But you can not re-print once you done this. Again re-printing can be controlled using BS22 by making the change in the relevant business transaction.
    Regards
    Tao

  • OnMessage / OnMessageAsync and processing order

    At the minute I'm trying to balance processing and throughput in a system where I need to ensure message order. The processing part basically involves a transformation and output to another service entity, e.g:
    [1, 2, 4, 8]  > {x2} > [2, 4, 8, 16]
    At the moment I'm using ReceiveBatch and SendBatch in a single thread to ensure that the messages are output in the correct order. I'm wondering if I can simplify things by using the OnMessage/OnMessageAsync, however I suspect that because this works with
    a number of concurrent calls that I may end up with my outputs out-of-order. e.g.:
    [1, 2, 4, 8] > {x2} > [2, 8, 16, 4]
    Is this going to be the case? 

    OnMessageOptions.MaxConcurrentCalls is 1 by default which means pump will hand over next message when you're done processing the current one (no multiple messages at any time). As long as this setting is 1 you can expect an order guaranteed
    delivery.
    https://msdn.microsoft.com/en-us/library/microsoft.servicebus.messaging.onmessageoptions.maxconcurrentcalls.aspx

  • Process order variance calculation

    Hi All,
    We have Sub- Assemblies which are currently set up in the system as purchased, sub-contracted sub-assemblies. this is how we will procure these the large majority of the time. There will be instances, however, where we will need to build them in house. but when we run cost estimate and mark and release sytem is using sub-contract Quantity structure in cost roll and when we producing we are using different Quantity structure like like BoM and Routing.at the time of variance calulation we are getting errors becuase of conflict in cost estimate Quantity structure and process order Quantity structure.
    How can i solve this issue?any help is appreciated...
    I'm getting the following error..
    Message no. KV181
    Diagnosis
    This message tells you which quantity structure was used by the cost estimate that calculated the target costs, and which quantity structure was used in the actuals.
    The cost estimate that calculated the target costs did not use the quantity structure used in the actuals.
    This means that the cost estimate used a different combination of task list type, task list group, and group counter than in the order itself (such as the production order).
    Example:
    Suppose the target costs were calculated in the standard cost estimate for the material, and that the standard cost estimate for the material is based on the routing identified by task list type N, task list group 50000309, and group counter 1.
    Now suppose the production order specifies a routing identified by task list type N, task list group 50000309, and group counter 2. This would lead to the error.
    System Response
    The system cannot calculate target costs for the valuation of work in process or scrap.
    See also:
    Routing/master recipe in actuals differs from qty structure for target
    Thanks,
    Anusha

    Hi,
    Please check SAP Note 386816 for error KV181.
    In general it is recommended to use the Cost estimate of the Process Order (Planned Cost Estimate) for the WIP at target calculation. In additional please pay attention to SAP Note 386816 which explains this procedure and which prerequisites must be met to calculate WIP at targets or the scrap variance. Even if the group counter of the routing is different you can still calculate WIP at targets but only if the message type of message KV181 is set to SPACE by Customizing settings.
    Hope this will a bit help to you.
    Best regards, Takashi

Maybe you are looking for