Quantity showing zero using T.Code FBL1N & FBL5N
Hi All,
Quantity showing ZERO using T.Code FBL5N & FBL1N.
Please help.
Thanks & Regards
Ritu Verma
Hi,
You can use Business Transaction Event 00001650 in FIBF transaction to fill the quantity field with the value from the required table. You can do this with the help of your ABAPer
Also go through the below thread to have an idea on how to code:-
Re: Vendor & Customers in FBL3N
Regards,
Gaurav
Similar Messages
-
Available credit quantity showing zero
Dear Experts,
while we are capturing excise for BOE,its showing the available credit quantity is zero.
but user created MIGO with reference to MIGO,but J_1IPART1the material is update against
GRPO with ROP indicator.while capturing the excise J1IEX ,its not showing the Part1 entries
and showing the available credit quantity is zero.in J_1IEXCDTL also showing zero quantity
in the available credit,please suggest me.
Regards,
Varuncheck th following
1)are u getting the values in GR ?
if not then check the condition record for vendor is maitained or not or the tax code used in PO is correct or not
3)is vendor is trader ?
then u need to make the manual excise entry in GRN and tick the MRP indicator then value will flow to the excise IV correctly.
regards,
sujit -
Component quantity showing ZERO
Hi Gurus,
I am getting an issue during create of production orders.The issue is like this
I took a finish material code F00010 and created two production orders with different order type
Also I maintained the alternative group in BOM for some line alternative items as below
Line item 1 are Line item 2 are alternative so I maintained the alternative group like below
Component 10 Alt.item group A
Priority 1
Strategy 2
Usage prob. 100
Component 20
Alt.item group A
Priority 1
Strategy 2
Usage prob. 100
After that created two orders with ZP01 and ZP02
When i am checking the component overview of two orders I am getting two different component quantity for second alt. item
Like in ZP01 I am getting 100% quantity for both line items
But in ZP02 I am getting 100% for first line item and 2nd line item showing zero quantity.
So why it is happening can anybody guide me.
Regards
ArabindYou have post the 261 with out referenec to reservation of the order.
That means you are posted in unplanned consumption
GO to COOIS
document goods movement, There you can find the your 261 goods movement posting
IF you want to Post with reservation,
cancel the old document
and do the GI in MB!A by selecting with reference "to order: in intial screen or in Co11n
Regards,
Sundaresan -
Need to strip the leading ZERO using ABAP code.
Hi Friends,
I got a situation where i got customer number called 011. I need to write an ABAP in Transformation to strip the leading ZERO , 11 should be posted to the master data attribute. could you help me in the logic pls.
Thanks in advance,hi friends, i got a prob again, as i mentioned if i got 0 as prefix its deleting but if any 3 digit is comming it's converting in to 2 digit, as i mentioned if the prefix is 0(zero) then only i need to delete the zero.
Is there any other solution for this..
thansk in advance. -
In J1IFR-List subcontracting challans, system showing Zero Quantity pending although Qty is pending at MASOP vendor. After reconciliation of challan, the Qty sent=250 , Qty received= 113. system must show Qty pending = 137. But when we check in J1IF12, Qty sent=250 and Qty received=113. Why J1IFR report is showing incorrect output.
I am facing this problem after Ehp7 upgrade in SAP ECC 6.0 version.
Thanks & Regards,
Neeraj.Are you using the same number ranges for different series group. This can cause inconsistency. Also check table J_1IGRXSUB whether right material documents are attached to your Challan.
Also refer to these notes which is only applicable for EHP6.
1753000 - Wrong output displayed for status in report selection-
J1IFR
and
1674607 - Duplicate entries while displaying Annexure IV in
J1IFR
Regards
Binoy -
Like the topic says, in the past year, I have used redemption codes on blu-rays I have purchased in iTunes and downloaded copies of the movies to my desktop. The problem is I am not seeing them in the Cloud if I want to watch them on my iPad or Apple TV. It also worries me that should my computer crash, the movies are lost since the codes are already redeemed. Advice?
I can only answer your first issue. In your ipad go to settings, iTunes & App Store, click on your Apple ID and sign out. Wait a few minutes and then log back in. The hidden apps shouldn't show any more on your ipad.
-
How to show ipad application in itunes, but will only be assessable to owners, not the general public by using lock code/password protected on iTunes
So if I understand you properly, I need to create EOs for all my list of values (which are based on views of Oracle apps tables) and base my VO on those EOs. And then I setup associations between these EOs and the Item EO. Then I include the these EOs in my Items VO and add the description attributes to my list of attributes. I had done this for the list of users, but for the views of Oracle I had just created read only VO. Sounds like that won't work if I want to display the description. I know what to do - I guess I was hoping there was a way to use the read only VO.
Thanks
Karen -
Vendor code in Purchase order changed after invoice,net price showing zero.
Dear Experts ,
In one purchase order , user had done GR & invoice for a line item ( service ),item category "D" , and
thereafter somehow the system allowed user to change the vendor code. The PO line is now having amounts in
the sub-service line items , but net price for the line item is showing as zero. Since the PO was made
directly without any contract/RFQ/PR , there is no reference document or info record shown against the line
item.
In the conditions tab of Item details,the condition for basic price is not seen & since there are no amounts
applicable for the other conditions such as insurance , octroi etc., the NET price shown for the item is
Zero, which is also getting printed in the PO as zero , which is not acceptable , as we can not send to the
vendor PO copy having prices for individual services printed correctly but the total gross price showing
zero.
Pl advise what can be done so that Net Price is shown correctly & not zero.I think the new vendor is having a different pricing schema than the old vendor. Check the pricing schema for the old vendor (in purchasing view in field 'Schema Group. vendor) and compare it to the new vendor. I think they're different.
If it is then what i think happening is the user already input the price for the condition type in pricing schema A, then the vendor is changed and the new pricing schema is kiciking in thus making the old condition type missing.
Try to either:
A. Change to the old vendor back,
B. Change the pricing schema of the new vendor to be the same with old vendor -
Problem showing Trademark symbol using ascii code in Flex 3
I am facing problem in displaying trademark symbol (™) using ascii codes(it is showing square symbol). I have ascii code stored in the database for trademark symbol(ascii code "™" ). So I can't use Hexa code instead of ascii code. But using ascii code I am able to show copyright symbol. Following is the sample code :
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical">
<mx:Script>
var trademarkSymbol = "\u2122";
var trademarkSymbol1 = "™";
var copyrightSymbol = "\u00A9";
var copyrightSymbol1 = "©";
</mx:Script>
<mx:Label text="Macromedia™"/>
<mx:Label text="Macromedia{trademarkSymbol}"/>
<mx:Label text="Macromedia{trademarkSymbol1}"/> \\ problem code
<mx:Label text="Macromedia©"/>
<mx:Label text="Macromedia{copyrightSymbol}"/>
<mx:Label text="Macromedia{copyrightSymbol1}"/>
</mx:Application>
Please suggest some solution.
Regards
Rajat SahniYou must use Unicode values, not Windows extended ASCII values.
The Unicode value of a copyright symbol is hex 00A9 or decimal 169. This happens to be the same as where it is in a Windows' extended ASCII character set, but this is irrelevant. The Unicode value of a copyright symbol is hex 2122 or decimal 8482. In Windows' extended ASCII it has a different value, hex 99 or decimal 153, but again this is irrelevant.
So the reason you think it "works" for the copyright and not for the trademark is that the two character sets agree on the value of the copyright but disagree on the value of the trademark.
Moral: Find a good Unicode table.
Gordon Smith
Adobe Flex SDK Team -
FBL1N & FBL5N shows amounts in thousands
Hi experts
FBL1N & FBL5N shows amounts in thousands 14,50080 $ instead of a normal display 14 500,80 $
Can anyone help to resolve this problem.
ThanksHi
Also make sure that you log off and log in back after the change of amount format.
Regards
Paul
Edited by: Paul01 on Dec 6, 2010 2:52 PM -
I have tried numerous .ico file makers and am using the code <link rel="shortcut icon" href="/favicon.ico" /> in the <head> section and the favicon.ico sits above the index file, but it is not showing up on the tab in Firefox or IE. I have also tried numerous designs, as I thought that might be the problem -- here are a couple and . What am I doing wrong? I have tried everything and Googled everything. I also use PC, but I hope that doesn't stop the Mac users from helping me.
Thank you Jon. As I mentioned to Nancy, the Favicon finally showed up this morning. But also thank you for another time saving piece of advice that saved me a lot of time and effort and is not mentioned anywhere. You are so right, "There's really no reason to add the code in the <head> if the favicon.ico is in your site root. Simply placing it there will do the trick in all browsers." I only put the code on my index page because I wasn't sure it would ever show up, and lo and behold, when it finally did this morning, it did on all pages and they had no code.
It is unfortunate that on all the websites (and I read what felt like all of them) dealing with Favicons, no one mentions these points. It's simple
create the 16px by 16px favicon.ico
Place it in the site root
Empty your cache and bookmark the page
Wait -- it will show up, possibly the next day.
Margaret -
ipod classic shows disk 3/4 full but when i look in the folders it shows zero for music and zero for podscasts. i can not access these folders on the ipod or when it does connect to my windows computer thru itunes. it does not connect 90% of the time now. i let it check the disk when it was connected to my pc which did not good - any other ideas? other than restore?
Your iPod filesystem is corrupted, so your music and podcastr is in the Others, this is most likely caused by a slow USB connection, which timeout during sync.
Try the Hard Reset first
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Then do the iPod Disk Diagnostic, in this earlier post by tt2, it wont fix your problem, but help you decide if your iPod is dying and causing the timeouts.
Have a nice day! -
FBL1N/FBL5N - Display of Material
Hi All
We want to display material in vendor/customer line item (FBL1N/FBL5N). We have already activated material by T Code OBVU. But still system is not showing material in customer/vendor line items.
Regards
Rajesh Guptahi rajesh,
After Executing the Tcode FBL5N, on the top of the screen you can see the option for the SET FILTER or press CTRLSHFTF2, so that you can see the window popups...
On the right side of the screen you can see the list of the Field List from the right side of the screen select the MATERIAL and transfer it fo the left side of the screen and then Click on COPY as....
The next screen you have to enter the MAterial number and click on the Continue button.....
Now Save this Variant and every time when u execute the FBL5N you have to select the same Variant, so that you can also see the maternal number.....
Hope this will solve your problem....
Ranjit Kumar....... -
Error while TO creation LT10 - Putaway quantity not zero
Hi All,
I am trying to create a Transfer order via LT10 (or via LQ02) where the available stock is available. The error log that I see says - "Putaway quantity not zero", Message no. L1605.
The stock Scenarion is like below:
Total stock 15
Avail.stock 15
Stock for put. 40
Pick quantity 0
What I understand for any stock transfer to happen there should be Available Stock. Now I want to use this 15 qty for further processing by using transaction LT10 or may be LQ02. Why does standard SAP not allow this?
If I do the stock transfer via LT01 for above scenario it does allow us to use the available stock.
The error is coming from below code of program RLS10034
*........Quants mit einzulagernden Mengen nicht markierbar!............
if itab-einme ne 0.
itab-ikone = sym_locked.
itab-msgid = 'L1'.
itab-msgno = '605'.
itab-msgty = 'E'.
endif.
Pls advice why the check is there in place when it could have been avoided and how to remove this check?
Thanks,
Ravi Sabhachandaniyes you are right there is a check and with standard SAP that is not possible you need to look for alternate method.Never came across this type of scenario in past however my suggestion is to have a look on the below function module and user exit that might be helpful
L_TO_CREATE_POSTING_CHANGE
MWMTOAU3 for posting change notices
Even if you are able to mange this with some custom code I see a operation issue there
LQ02 is help to the change the stock from one stock type to another (or quant characteristic) as per your test data if I will transfer the 15 pc from unrestricted to Quality and later on the transfer order of 40 get's confirmed (which is having the unrested stock) in the same bin (this depend on the configuration of mixing) how the worker will come to know which is quality reject or which is unrested by looking physically
Total stock 15
Avail.stock 15
Stock for put. 40
Pick quantity 0 -
Leading zeros for zip codes in Numbers
I couldn't find an answer for this question but finally figured it out so wanted to share. Here's how I got the zeros to show in my zip code column:
You can make a custom cell format from the cells palette. You have to hide the separator and add a digit using the Integers bubble. Then choose show zeros for unused digits.
Then apply this format to the entire zip code column in your doc.I was having the same problem. You pointed me in the right direction but in 09 the prompts are slightly different.. Hilight the column. In the cell inspector, cell format, choose NUMERICAL SYSTEM and set the number of places to five.
It should now look right but before you save it, create a new column and format it as above into TEXT. Then copy the one you've fixed, and paste it into the new text column. This should save fine as cvs in any event, as well as numbers.
Maybe you are looking for
-
Problems with Fact Table in an Infocube
In IC 0CCA_C11 we've seen almost a 50% increase in the row count on the F fact table from about 100 million rows to about 150 million rows. However we are very certain that we really havent had that much growth. We have a process chain that does a
-
Hi Xperts, Please help me to know is there any standard report related to output of mrp run ( Tc u2013 MD01 ) like list of delivery schedule for suppliers generated by mrp. Thakns in Advance
-
Setting GPS IPTC Longitude and Latitude During Import
Hi, Is it possible to set the longitude and latitude (GPS coordinates in the respective IPTC fields) during insert and have the info automatically being written back into the original image? Thanks, Draellme
-
Locating templates to print on dvd
I am using a photosmart D7560 Printer. When I try to print on a dvd I go to the sutions center a choose print dvd, it then takes me tom photosmart software which has no chocies for printing on a dvd.
-
Title says it. I created a textbook using Ibooks Author and want to load it on my class set of 30 iPads that are used by 5 different groups of students throughout the day. It is not a 1 to 1 device. Is there a problem with doing this as the Apple ID