QUARANTINED MAIL - WHERE DOES IT GO? HOW TO STOP ENDLESS LOOP?
A server has received a "phishing" message that was caught by the spam filter.
The user is now getting continuous messages advising them of this fact, which seem to be in some kind of "endless loop". The messages say:
Our internal reference code for this message is 06888-08.
The message has been quarantined as:
[email protected]
Where is this "quarantined" message at and how can it be accessed?
How to stop the "endless loop" of these messages?
how viruses and spam are quarantined is defined along with many other settings you may want to customize in /etc/amavisd.com
You can clear your qurantine directory with:
sudo rm -rf /var/virusmails/*
If you don't want spam & virused quarantined to this directory, locate the following line in /etc/amavisd.conf and insert a # sign in front of it:
$QUARANTINEDIR = '/var/virusmails';
change to:
#$QUARANTINEDIR = '/var/virusmails';
stop/start mail service for you change to take effect.
Jeff
Similar Messages
-
how long does mountain lion take to download and where does it say how much it has left mine just says downloading ?
It's totally dependent on your broadband speed.
It took me about 45 minutes to download, but I have a reasonably fast connection.
It will often say in the purchased pane of the Mac App Store how much longer it will take. -
every time i get on my computer and click on imessage and facetime a little box pops up saying an internal messages error occurred or an internal facetime error occurred....but my question is how do i get it to stop doing this or how to stop it.
For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa -
Hi! I've just purchased an iPhone 5S but whenever I text people with iPhones it sends from my iCloud account. This means that my email comes up for other people not my name/number which is really frustrating! Does anyone know how to stop this?
Go into Settings>Messages>Send and Receive> Is your phone number checked there? If you do not want your email used, then tap on them and remove the checkmark. If there is no checkmark by your phone number, then turn iMessage off, perform a reset on the phone, hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. Turn iMessage on. When it activates, check your settings again under Send and Receive and make sure the number is checked and the emails are not.
-
I can't find preferences for the notes app. and every once in awhile some of my notes just disappear at start up, I see the name and then it refreshes and they are gone, very annoying. Can anyone tell me why it does this and how to stop it? thanks
Hi again, I am on an iMac using OSX 10.7.5, I"ve taken screenshots to show you I think my settings are correct
-
Contacts producing multiple entries as does calendar . How to stop and fix please.
Contacts producing multiple entries as does Calender. How to stop and fix pls?
ok easiest way it to restore to factory setting and start from there. When you go to do your first sync you don’t “sync contacts or calendar”. When you add mobile me onto your Ipad select all the services that you want to enable and then mobile me will keep everything in sync.
If you need futher steps let me know -
I added a new email account and now I'm getting 2000 emails. Does anyone know how to stop them?!
I added a new email account and now Im getting over 2000 emails. Does anyone know how to stop this?!
Wait until it finishes. It's just downloading the headers of the emails in your account and caching them offline for quick access. Once it has finished it will go back to just downloading new emails as normal.
-
My iphone5 itunes playlist seems to have a mind of it's own, after selecting a song to play it will randomly flash through songs on my playlist without stopping. I've rebooting, and restored my iphone with no results. does anyone know how to stop this from happening? also I am having trouble syncing songs from my library on my computer to my iphone. the songs so up on my playlist on the computer, but will not synch over to my iphone5. Thank you.
Hi TakesTwo2Tango,
Thanks for using Apple Support Communities. It sounds like you should definitely be seeing a plus sign after tapping Edit, so I would try a couple relatively easy things (closing the Music app, resetting the iPhone):
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
- Ari -
How to stop while loop when a specified function is terminated?
I want to make a program which has 2 thread, one of which is to control some devices, and the other is to measure outputs of the devices.
To do that, I should make a 2 independent loops, but there comes a problem here.
I want to terminate 2 loops at the same time, but it's difficult for me to do that, because when I try to notify upper sequence's termination to lower loop by some value change, they have some dependency.
That's why I need your help. I want to know how to stop lower loop when the upper sequence's termination keeping their independency.
Please let me know. Thank you.
Attachments:
help.JPG 200 KBIs the upper loop commanding the lower loop at all? I would think you would have some type of communication between the loops. Just use that communication to send a stop command. Or the next best way is to just simply use a notifier.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Hi,
I just upgraded to Yosemite and Safari is now showing a frequently visited websites box right below the address bar when I start to type something in it. Does anyone know how to deactivate this box? Its rather irritating.
Thxdominic23 wrote:
Try this.
Safari > Preferences > Search > Smart Search Field
Uncheck the box beside "Show Favorites".
I haven't tested this long enough to say that this works always.
Best.
Yup, that works. -
MASTER/SLAVE PATTERN: how to stop slave loop without stop main loop
Hi All, I am studying the master/slave loop and saw an examples are like this (only master block shows)
From this case, as I understand, if we click "set" button, slave loop will run. If we click this button again to mak it "Flase", the slave loop will be stopped as well as the main loop will be stopped as well.
Now if I have a multi-function main loop, I just want to start or stop slave loop when click "set" button, how can I do it? Thank you very much!bhl3302 wrote:
From this case, as I understand, if we click "set" button, slave loop will run. If we click this button again to mak it "Flase", the slave loop will be stopped as well as the main loop will be stopped as well.
Your understanding is completely wrong. There is nothing in the image you show that would stop either loop. In this situation the "set" button would normally have a latching mechanical action, meaning that when it is pushed, it will stay true until it is read once, at which point it will return to false. Placing the control terminal inside the event case causes the terminal to be read and resets the button to false. With a latching mechanical action, there will be only one event generated even though the boolean will change value twice (from false to true, and from true to false). You'll never have a situation where you push the button once to set it true, and again to set it false. However, even if the mechanical action is switching, not latching, it still won't make a difference here - the event case does the same thing whenever the value changes, regardless of whether it's true or false. -
Mail trying to load messages and seemingly in endless loop
Recently, after getting a new logic board, new memory and reinstalling 10.4.11, mail has been trying to download emails from my server and just gives a "fetching message..." in the activity viewer for an extended period of time (I let it go for 10 minutes to make sure). BTW, this happened after I had been receiving emails just fine for 3 or 4 days.
In the activity viewer window, the "status bars" that normally move are stagnate. It also mentions trying to route the first message from two of my accounts. I don't have any rules set up (other than the default news from apple one) and junk mail enabled. I am using DSL, so it's not a slow download and I searched through my ISP host and could get to the emails, but it would be much more convenient if I could use Mail!
If I stop the downloading of these emails, Mail just sits and in the activity viewer I get "STOPPING :...." for each one but nothing happens. I have reverted to just Force Quitting Mail to move on, but something is obviously not working right.
Any thoughts on what's happening or where to go from here?Mulder,
Did 1, 2, and 3 as after each one, still the same problem. After 3, I started Mail without doing anything else, including any updating of software. In console got this long list:
2008-09-23 22:59:48.187 SystemUIServer[968] lang is:en
2008-09-23 23:00:20.820 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/InMailbox.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character b at line 1
Old-style plist parser error:
Unexpected ';' or '=' after key at line 1
2008-09-23 23:00:20.840 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/InMailbox.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character at line 1
Old-style plist parser error:
Unexpected character '0x2' at line 1
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character at line 1
Old-style plist parser error:
Unexpected character '0x0' at line 1
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character at line 1
Old-style plist parser error:
Unexpected character '0x0' at line 1
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character at line 1
Old-style plist parser error:
Unexpected character '0x100' at line 1
2008-09-23 23:00:20.886 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/InMailbox.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character e at line 1
Old-style plist parser error:
Unexpected ';' or '=' after key at line 1
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character Q at line 1
Old-style plist parser error:
Unexpected ';' or '=' after key at line 1
2008-09-23 23:00:20.916 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/InMailbox.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character e at line 1
Old-style plist parser error:
Unexpected ';' or '=' after key at line 1
2008-09-23 23:00:20.927 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/InMailbox.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character l at line 1
Old-style plist parser error:
Unexpected ';' or '=' after key at line 1
2008-09-23 23:00:20.937 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/InMailbox.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character a at line 1
Old-style plist parser error:
Unexpected ';' or '=' after key at line 1
2008-09-23 23:00:20.947 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/InMailbox.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'Conversion of data failed. The file is not UTF-8, or in the encoding specified in XML header if XML.'
2008-09-23 23:00:20.956 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/InMailbox.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character a at line 1
Old-style plist parser error:
Unexpected ';' or '=' after key at line 1
2008-09-23 23:00:20.966 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/InMailbox.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character D at line 1
Old-style plist parser error:
Unexpected ';' or '=' after key at line 1
2008-09-23 23:00:20.977 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/InMailbox.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character at line 1
Old-style plist parser error:
Unexpected character '0x10' at line 1
2008-09-23 23:00:20.987 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/InMailbox.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character V at line 1
Old-style plist parser error:
Unexpected ';' or '=' after key at line 1
2008-09-23 23:00:20.996 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/InMailbox.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character at line 1
Old-style plist parser error:
Unexpected character '0x3' at line 1
2008-09-23 23:00:21.008 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/DraftsMailboxLarge.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character a at line 1
Old-style plist parser error:
Unexpected ';' or '=' after key at line 1
2008-09-23 23:00:21.010 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/DraftsMailboxLarge.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character $ at line 1
Old-style plist parser error:
Unexpected ';' or '=' after key at line 1
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character at line 1
Old-style plist parser error:
Unexpected character '0x0' at line 1
2008-09-23 23:00:21.014 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/DraftsMailboxLarge.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character at line 1
Old-style plist parser error:
Unexpected character '0x1' at line 1
2008-09-23 23:00:21.017 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/DraftsMailboxLarge.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character e at line 1
Old-style plist parser error:
Unexpected ';' or '=' after key at line 1
2008-09-23 23:00:21.020 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/DraftsMailboxLarge.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'Conversion of data failed. The file is not UTF-8, or in the encoding specified in XML header if XML.'
2008-09-23 23:00:21.026 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/OutMailboxLarge.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character i at line 1
Old-style plist parser error:
Unexpected ';' or '=' after key at line 1
2008-09-23 23:00:21.028 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/OutMailboxLarge.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'Conversion of data failed. The file is not UTF-8, or in the encoding specified in XML header if XML.'
2008-09-23 23:00:21.030 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/OutMailboxLarge.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character p at line 1
Old-style plist parser error:
Unexpected ';' or '=' after key at line 1
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character at line 1
Old-style plist parser error:
Unexpected character '0x0' at line 1
2008-09-23 23:00:21.037 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/TrashMailboxLarge.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'Conversion of data failed. The file is not UTF-8, or in the encoding specified in XML header if XML.'
2008-09-23 23:00:21.039 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/TrashMailboxLarge.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character . at line 1
Old-style plist parser error:
Unexpected ';' or '=' after key at line 1
2008-09-23 23:00:21.041 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/TrashMailboxLarge.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character e at line 1
Old-style plist parser error:
Unexpected ';' or '=' after key at line 1
2008-09-23 23:00:21.051 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/junkmail.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character at line 1
Old-style plist parser error:
Unexpected character '0x18' at line 1
2008-09-23 23:00:21.053 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/junkmail.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character B at line 1
Old-style plist parser error:
Unexpected ';' or '=' after key at line 1
2008-09-23 23:00:21.062 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/junkMailFlag.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character > at line 1
Old-style plist parser error:
Unexpected character '0x3e' at line 1
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character at line 1
Old-style plist parser error:
Unexpected character '0x0' at line 1
2008-09-23 23:00:21.066 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/junkMailFlag.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'Conversion of data failed. The file is not UTF-8, or in the encoding specified in XML header if XML.'
2008-09-23 23:00:21.071 Mail[992] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
/Applications/Mail.app/Contents/Resources/NormalMailboxLarge.tiff
The parser will retry as in 10.2, but the problem should be corrected in the plist.
Error in createMutableDictionaryValue:1012 for property 'Email' 'XML parser error:
Unexpected character , at line 1
Old-style plist parser error:
Unexpected character '0x2c' at line 1
2008-09-23 23:00:21.091 Mail[992] * -[NSCFString objectForKey:]: selector not recognized [self = 0x5c99bf0]
2008-09-23 23:00:21.091 Mail[992] Exception raised during monitored invocation of openSynchronouslyUpdatingMetadata:, exception: * -[NSCFString objectForKey:]: selector not recognized [self = 0x5c99bf0]
Sep 23 23:00:22 kevin-and-tiffins-imac-g5 mdimportserver[961]: * -[NSCFString objectForKey:]: selector not recognized [self = 0x621580]
Sep 23 23:00:22 kevin-and-tiffins-imac-g5 mdimportserver[961]: -[FileProcessor importMetadataFromFileAtPath:] Got exception * -[NSCFString objectForKey:]: selector not recognized [self = 0x621580] for path '/Users/KnT/Library/Mail/[email protected]@mail.fuhrmanmusic.com/D eleted Messages.mbox/Messages/587.emlx'
Wow, any ideas now? -
I can't figure out how to stop a while loop in my labview program.
When the user presses the Run arrow in the toolbar I want my program to begin reading the serial port for GPS messages. These messages should be displayed on the front panel. Currently I have this read/display in a while loop. The program is also waiting for an extrenal trigger. When that trigger arrives, I want to grab the current string from the serial port and save it and continue reading and displaying the serial/gps string. This trigger starts the other parts of the program- signal generation, recording, and saving data which need to run concurrently with the serial/gps reading/displaying. Once the AO and AI have finished and the data have been written to disk, I want the program to stop. The serial/gps messages should be updating this whole time. Only when the data are written to disk should the whole program end. This whole sequence of events should only be done once when the user preses the Run arrow.
So far I'm unable to pluck the serial string when the trigger comes in if I'm watching the serial port all the time. The program also doesn't stop when it finishes writing to disk because the read serial while loop is still running. I don't want to use a front panel stop button. The program should stop itself when the data havebeen written.
I'm really stumped on this one but I'm new to LabVIEW so I'm sure there's an easy solution to this.
Thanks for any and all help.
Attachments:
SPoleLakeChirp.vi 199 KBDennis and altenbach- Thank you both for your patience.
I was trying to do just what Dennis suggested-"As I said, setting a local variable is one way." even before posting to this forum, but I couldn't get my local variables to reflect changes made elsewhere in the program and I wasn't able to wire from them because they were writes. The critical part I was missing was how to change a local variable from a write to a read. It was staring me in the face the whole time- just right click. When I finally found it, my problems were solved.
altenbach- thank's for putting the figures together. I do understand the logic and wiring there, but I was really trying to avoid stop buttons. The program should be smart enough to figure out when to stop. And using local variables turns out to be one way of solving this. I still have some clean up to do, but I've included my current working version just so you can see how I implimented your suggestions. There's still a lot of clean up to be done, but I'm delighted to be able to watch the serial/gps messages until I'm done reading in data. At first I had this stop variable set in the final sequence frame. That didn't work because I wasn't getting to the final frame because the loop wasn't finishing. Once I placed the stop variable in the same frame as the while loop it began stopping when it should.
If you have other comments/critiques about the wiring diagram I'm earger to hear them. I'm considering the structure finished, however. It still needs cleaning up and commenting, but I'm satisfied with the functionality.
Thanks,
Peter
Attachments:
SPoleLakeChirp.vi 210 KB -
HT5312 So where does it say how to reset your security questions?
Hey all,
So, does anyone here know how I can reset my security questions? I do have a rescue email address just so you all know.You are sure that it's a rescue email address and not an alternate email address ? They are different settings/addresses on your account. If it is a rescue email address then you should get the option to send reset info to it as described on that page i.e. under the 2 questions.
Otherwise you can see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551 -
How to stop endless requests for Mail password?
My PowerBook G4 15" with OS 10.58 constantly asks for password. How do I stop this?
I was able to stop this behavior on another person's Tibook by deleting the Keychain with Keychain Access app and starting a new one. I think I also deleted the Mail accounts and started those anew. This was not a problem with an IMAP account, so everything was retained and rebuilt. Be sure to check mark any dialog that asks whether to save this password in my Keychain.
Your plan may differ if you have POP mail accounts, or an extensive Keychain with many other passwords that are hard for you to remember and reenter. You probably don't want to lose archived POP mail messages. I would certainly try to archive all mailboxes before experimenting, in case everything in Mail disappears. Better to clone your whole drive and/or a Time Machine backup (which you should do anyway). You can also try deleting Keychain entries only related to Mail, as well as the command for Keychain First Aid.
Maybe you are looking for
-
Create menus to run projects (4-8 in a menu)
What feature in Captivate allows you to organize your projects (SWFs) into a menu so users can step through the related recordings one at a time (view, back, next). Please tell me it's not Menu Builder. ;-) I am evaluating Captivate 3 and am looking
-
How can i reference a MIME object within a correspondence format through...
how can i reference a MIME object within a correspondence format through TX oofo or se71? Hi, I need to put a MIME object within a correspondence's format that i've already done through Tx oofo. My problem is, that i don't know exactly how can i make
-
I can't burn a disc from I work'08
I can't burn a disc so I can make a slide show.
-
How to keep embedded PDF's in an MS Word 2010 document during export to PDF with PDFmaker
Hi, I am preparing in MS Word 2010 a Software Manual with embedded PDF's When I double click in MS Word on the inserted PDF, Acrobat opens the embedded PDF (these are A0 CAD Drawings). I want this functionality also after I have converted the MS Word
-
To add the multiline data into an internal table from TextEdit
Hello Experts, I have one requirement that I have to use the TextEdit field. and put the values into an internal table. can you help me. with some sample code. Thanks in Advance Kuldeep