Quark 7.3.1 and OSX 10.5.4

I successfully upgraded from 10.4.11 to 10.5.3 over the weekend (and .4 today). Since then my Quark 7.3 files have not been working. Every time I open an old (as in created the day before upgrading to 10.5), Quark freezes when I get the dialog box that tells me I have missing fonts, even though the fonts in question are in the font folder. I discovered the Quark 7.3.1 upgrade, but that didn't change a thing, Any suggestions? I could not find anything in the Quark forum.
Thanks for any help!

Just so this won't be a total waste of my time, here try to learn something.
yet the application still hangs (49 times according to the Aperture activity monitor).
From http://lists.apple.com/archives/unix-porting/2005/Oct/msg00032.html
"not responding" means that the application is currently "hung".
"recent hangs" is the count of times the application was not responding, but then became responsive again.
ActivityMonitor sends "ping" AppleEvents to processes to determine if they are hung. If they respond to the event, then they are not hung. If they fail to respond to the event, then they are considered to be in a "Not Responding" state, and for each transition from "Responding" to "Not Responding" that it sees counts as a "hang" of the application.
Normally, an application will be written in such a way that it will at least *periodically* check for AppleEvents, even if it tends to call from an event from CFRunLoop into a long involved process. You can get false positives on a "Not Responding" (the same situation that gets the busy cursor on an application in the GUI, FWIW) if an application does a huge amount of work in something called from CFRunLoop.
You have a problem, not Aperture not Apple. That problem is not a 'memory leak' as is obvious from your Activity report or any other buzzword you've picked up on the net trying to sound impressive.
I gave you a few steps to start the troubleshooting process, you choose to ignore those and instead come back here and make disparaging comments about me.
During the over 35 years I was doing this for a living I had to put up with people like yourself, now that I do this on a volunteer basics I don;t have to.
regards

Similar Messages

Problems with FCP 5.1.4 and OSX 10.4.9

I upgraded to Tiger, installed the new FCP Studio and everything was working fantastic.
The next morning there was a software update for Tiger and FCP-5.1.4, it's been a nightmare ever since. When I restarted FCP would not recognize my Sony HDR FX1.
I had this problem once before with 4.5 and I fixed it by re-installing FCP and doing the upgrades, so that's what I did with 5 but this time there was a new problem. It wouldn't let me work on anything that I had opened since I did the software update, so I had to do the update again and then FCP wouldn't recognize my camcorder again on startup. If you pressed log and capture you could control the camera but no capture was possible.
So I re-set the easy set-up and presto! everything was fine and I worked productively for a few days.
But then I had to capture some SD from my Canon GL2 so I reset all the settings for DV NTSC and reset the easy set-up for DV NTSC but now FCP won't recognize my GL2 on start-up. If I click log and capture I can control the camera but no capture.
My next try to solve my problem was to downgrade back to my original 10.4.6 and FCP 5.1
That put be back to square one and everything works fine again except I am left with the problem that everything that I worked on after I did the update won't open, I get error 41.
Now I know this is because I am now trying to work on these projects with 5.1 after they were worked on in 5.1.4. But the problem is that everytime I update to 5.1.4 I can no longer capture or print to tape.
I tried the trashing the FCP prefs thing and the repairing permissions thing but I can't seem to solve the problem.
Has anyone else had any problems using FCP 5.1.4 and OSX 10.4.9?

Not sure how you tried to install 10.4.8 but if all
else fails you can always reinstall the original
operating system that came with your Mac using 'Erase
and Install' then upgrade it to 10.4.8 - probably in
stages.
Erase and install should be used as a last resort! A better option is to use the "archive and install" feature. It renames your old system folder and creates a new one for the OS you just re-installed. That way you don't have to reinstall everything, your user accounts and emails should all still be there, and if something doesn't work, you have your old system folder to pull things like preference files out of.
Eric

ITunes 7.5 and OSX 10.4.11 - CANNOT CONNECT TO iTUNES STORE

After a recent upgrade to iTunes 7.5 and OSX 10.4.11, I can no longer connect to the iTunes store. I have tried reinstalling iTunes 7.5 (and Quicktime - just in case!). I have also tried Keychain First Aid. Still it is broken. Please help me with this problem if you know of a fix.

i can't connect to the itunes store on 2 out of 3 macs in the house!!! this occurred in the last 48 hrs or so... although i downloaded a movie this week which took ages vs the normal time.
all connected through the same airport & have same settings & all other internet stuff fine.
i don't have any snitch.
i checked versions of software for os x and itunes on each machine:
(cannot connect) powerbook g4 runs 10.4.11 and itunes 7.5
(cannot connect) macbook 2.2 ghz runs 10.5.1 and itunes 7.5
(connects to store) macbook 2 ghz runs 10.4.10 and itunes 7.4.2
would indicate something wrong with itunes 7.5 but can't be sure...
Help pls...

Would I be able to use the same external hard drive for Windows and OSX?

I plan to get an external HD to put a lot of my multimedia files on and for backups but I don't know if I'll need an individual one for each operating system. I am going to be running a MacBook Pro with both Windows and OSX through Boot Camp.

jengwall,
No, you won't need more than a single drive. There are several options to meet your needs.
OS X can partition your external, and the formats for the various volumes can be HFS+ (the native Mac format) or FAT-32 (Windows format). While OS X cannot create NTFS volumes, and it cannot write to them, it can read them. Any FAT-32 volumes created in OS X can be converted to NTFS by Windows, if and when you like.
Windows cannot natively read HFS+ volumes, and only the FAT-32 format will be both read and write for both Windows and OS X. However, there are some third-party solutions.
"Macdrive" is a Windows utility that allows it to access HFS+ volumes as read/write. On the Mac side, there is "MacFuse," which gives OS X the ability to not just read, but write to NTFS volumes.
Scott

How can I get iCloud to sync between iOS 6.1.3, OSX 10.6.8 and OSX 10.8.3?

I am running both OSX 10.6.8 and OSX 10.8.3 on my iMac with iOS 6.1.3 on my iPod Touch.
Everything is checked ON in the iCloud settings where those are available, in iOS, OSX 10.8 and in iCloud.com on my OSX 10.6.8 system.
I either get no synchronisation, or a duplication of events. Apple Store Events which need to be clumsily downloaded from the website, double clicked on and hopefully added to Calendar, only randomly appear and rarely get announced. I can't see a pattern to anything.
It currently won't sync between iCloud.com and Address Book, Calendar etc on the Mac let alone with iDevices (my wife has an iPad as well), despite partially syncing previously.
It is erratic, obscure and totally unreliable as well as being a huge waste of my time.
If I follow the iTunes instructions as well as the iCloud.com instructions generally nothing happens.
In the Advanced pane of iCloud.com settings, I have selected the “In-app notifications” checkbox, and Saved. Doesn't work. Then I unselected and saved and closed iCloud.com. Then checked it all over again, still doesn't work.
According to the settings it says it is sharing with the iPod Touch, but nothing happens.
Previously a few events appeared belatedly at some later time, often after the event they were supposed to announce. Currently nothing is syncing.
Most frustratingly I can't sync my Address Book/Contacts so have to manually include all the contact info in all my individual devices and systems.
Has anybody got a surefire method of making the sync happen?

Csound1 wrote:
PeterBreis0807 wrote:
My take on what is supposed to happen is that the data is stored in Apple's iCloud server no matter how you put it there.
That's correct but your 10.6.8 machine has no way to put it there unless you manually enter it on the website.
That to sync data from iCal and Address Book in Snow Leopard to the iCloud server you must manually register and connect to the iCloud.com website which I have done.
You can't sync from Address Book or iCal in Snow Leopard.
PeterBreis0807 wrote:
My take on what is supposed to happen is that the data is stored in Apple's iCloud server no matter how you put it there.
That to sync data from iCal and Address Book in Snow Leopard to the iCloud server you must manually register and connect to the iCloud.com website which I have done.
The syncing to the same data in Mountain Lion is done via the System Preferences > iCloud, which I have done.
Supposedly that means the data on the iCloud server is then shared between the iPod Touch, SL and ML, but it is not.
Because data entered on the SL machine never makes it from iCal or AB to iCloud or from iCloud to AB or iCal, the link breaks there.. You can use a 3rd party app (Soho) and use it instead of AB and iCal.
But the problem exists on ML as well.
I get only some Contacts and iCal events transferring.
What you are seeing is probably from SL account which I use 95% of the time. Particularly my Address Book entries. I hardly entered any of those in ML, they virtually all come from SL and seem to have transferred previously. Possibly before the latest iOS updates, but I can't swear to that as I didn't check before/after.
The vast majority of my Address Book entries appear in both iCloud.com and my iPod Touch, but not my latest changes.
This is far from the "It just happens!" promised by Apple.
Peter

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps). So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens. What next?

Try...
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html

Server File Sharing unstable on mac and windows network on Mavericks and OSX Server 3.0

Since I've updated our mac mini server from Mountain Lion and OSX Server 2.X to Mavericks and OSX Server 3.0 we are having sharing issues with Windows (7 and 8) and OSX Mavericks users, not being able to access files on the mac mini server.
What I've notice is that OSX Serer 3.0 stop working and I have to restart the Mac Mini Server to make things start working again.
This was not happening with Mountain Lion and OSX Server 2.X.
On the Windows and OSX users what happen is the computers keep trying to connect to the server and are not being able to open or copy files. Again this is intermittent, and I suspect it might be a OSX Server bug.
Any one having the same problem or can give us and advice would be great help.
Thanks.
Andre Tenenbaum

I too am having this exact problem as well as a few of my network administrator contacts that have gone through the Mavericks / Server 3 upgrade.
It may be worth noting that before the upgrade I had run a mac mini server (core 2 duo) that never had any unintentional downtime, and the current mac server had never gone down or lost connection so I know it has nothing to do with user or network configuration.
NAS server hardware:
- Mac Mini core i5
- 16 GiB ram
- Promise Pegasus Raid5 external drive (thunderbolt)
I am NOT running time machine as the backup.
Everyting posted above is occuring although the rate at which my users lose acces is sporadic. Sometimes the server will stay up 24-36 hours and sometimes it will only stay up for around 4. Every user, every group loses acces AT THE EXACT SAME TIME EVERYTIME to EVERY SHAREPOINT...all of my local users as well as my remote users. All of my users are on Windows machines (mostly win7, but a couple of XP and 8 users as well). The share is accessed via a mapped drive using the format x.x.x.x/share and I have had 0 issues with getting users connected. The problem is 100% keeping them connected. When the users lose access the get the "drive cannot be accessed" error on their end, however when I check the server 3 app, it still shows all users connected and I have let it run for a few minutes and the idle times do change.
I also cannot see any spikes in the Activity monitor that might indicate a memory strain issue on the server side, but I assume that is because I am not watching the Activity Monitor at the moment everyone loses access.
Let me say that the SMB2 protocol does work much better when it actually works, much faster, but intermitent connectivity is a VERY SERIOUS ISSUE and has resulted in several corrupt files for my workers already. Also, because I was one of the unfortunate people that had the upgrade lock up on me and I had to restart it, I lost my 10.8.x recover backup and so I would have to do a clean install in order to restore my server back to its original state. I am also hesitant to do this because I would most likely only be able to download the Server3 app from the app store and I have not heard from apple or any other power user group on whether the bug is with the app or the OS.

Cisco ASA 8.2(2) Lt2p windows client and OSX remote VPN

Having trouble getting windows 7 and OSX to authenticate via VPN to the ASA.
Something is missing or not configured correctly.
In the ASA logs I get this error
ipaa error freeing address
On the client side I get invalid username/password. I am trying to authenticate using our LDAP map to our Active Directory box. (it works with other the cisco VPN just fine)
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
wins-server none
dns-server value 10.10.0.99 10.10.0.100
vpn-tunnel-protocol IPSec l2tp-ipsec
ipsec-udp enable
default-domain none
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
tunnel-group DefaultRAGroup general-attributes
address-pool IPpool
default-group-policy DefaultRAGroup
strip-group
tunnel-group DefaultRAGroup ipsec-attributes
pre-shared-key Ourprivatekey
tunnel-group DefaultRAGroup ppp-attributes
no authentication chap
authentication ms-chap-v2
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set samplevpn esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set Set_1 esp-3des esp-sha-hmac
crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac
crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map samplevpn_map 1 set transform-set samplevpn
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 TRANS_ESP_3DES_SHA
crypto map workmap 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map workmap interface outside
crypto map workmap interface backup
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 28800

Thanks for the response Javier, but I'm still getting the same error.
FRWALL# show run aaa-server
aaa-server ADLDAP protocol ldap
max-failed-attempts 5
aaa-server ADLDAP (inside) host 10.10.0.91
ldap-base-dn dc=*******, dc=com
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn login@*********
server-type microsoft
aaa-server ADLDAP (inside) host 10.10.0.91
ldap-base-dn dc=n********, dc=com
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn asaldap@*******.com
server-type microsoft
FRWALL# show running-config tunnel-group DefaultRAGroup
tunnel-group DefaultRAGroup general-attributes
address-pool VPNpool
authentication-server-group ADLDAP
default-group-policy DefaultRAGroup
strip-group
tunnel-group DefaultRAGroup ipsec-attributes
pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
no authentication chap
authentication ms-chap-v2

Dual Boot Windows7 and OSX on an HP 2140

I thought this was a great blog from networkjew.com about creating a Dual Boot Windows7 and OSX on an HP 2140.
Now that you’ve got your sleek little HP 2140 netbook, its time to blow away Windows XP and put something a bit snazzier on there. I’ve toyed with OSX86 previously, and knew that most of the netbooks out there support it in one way or another, and many of them quite well. I had also read that Windows 7 played very nicely on these tiny computers, and it’s free for a few months, so why not?
Here’s how I made it work – there may be better ways, but this worked for me, mostly:
HP Product Expert for the Officejet Pro X Series.
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!

Windows 7 runs great on the 2140. I actually haven't had a chance to test all hardware functionality, but its nice and snappy; and as far as I can tell, all the hardware was recognized right out of the box. I loaded several of the Vista drivers/software from the HP support website and a few of them failed, but many installed just fine. I forgot to note which ones, unfortunately.
Great netbook.

Hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

On your friend's computer with an internet connection, log into the Mac App Store with your ID and download Yosemite from the Purchases section of the Mac App Store. The make a bootable USB install media using
http://liondiskmaker.com/
Then boot from that on your computer and install
You need an internet connection to install via Recovery mode

Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with CS3 and CS6 and get the same problem. Doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with both CS3 and CS6 on 10.8.2 and get the same problem. This doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

this one is actually a really rare symptom of a flaky connection to the ipod on a Windows PC. there's more going on in terms of hardware on nanos and 5th gens than in the earlier models ... so if the connection is flaky to precisely the right/wrong degree, itunes will see the ipod, but misidentify it as an earlier version of ipod.
tracking down the cause of the flakiness can be tricky ... as you already know ...
just checking. have you tried connecting with a different (known-good) USB cable? does that seem to have any impact on the rate of occurence of the problem?

I have Firefox 10.0.2. and OSX 10.6.8. and the latest PDF adobe reader, and still can not open with the browser PDF files.Can someone help,pls?Thanx

Dear Ones,
I have Firefox 10.0.2. and OSX 10.6.8. and the latest PDF adobe reader, and still can not open with the browser PDF files.Can someone help,pls?Thanx

see if this is helpful : [http://support.mozilla.org/en-US/kb/Opening%20PDF%20files%20within%20Firefox Opening PDF files within Firefox]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Encore keeps crashing on startup on macbook pro. I have all the latest cc and osx updates

encore keeps crashing on startup on macbook pro. I have all the latest cc and osx updates

What specific OS and Encore versions? Since you say "latest OS updates," I assume Mavericks, and is this the relatively new 10.9.1 version?
Where in the startup does it crash? Is there an error message?
Mavericks causes a variety of issues, and we don't have enough data to really pin them down. At least with the original Mavericks, some users appeared to get CS6 to run with some serious but workable problems.
Make sure you have handled any permissions issues.
This describes such issues:
Troubleshoot system errors and freezes | Adobe software on Mac OS 10.x
http://kb2.adobe.com/cps/824/cpsid_82414.html

Hi, i have an old imac g4 running 10 .3.9,it has 2 partitions,1st partition has os9 and osx,but would like to put ubuntu on my empty partition,can it be done if so how,thanks for reading,

hi, i have an old imac g4 running 10 .3.9,it has 2 partitions,1st partition has os9 and osx,but would like to put ubuntu on my empty partition,can it be done if so how,thanks for reading,

I have my iMac G3 set up with three partitions like you are proposing.
I'd recommend getting virtual box on your new Mac. You can install the latest Linux version easier this way.
The problem is finding a PPC distro you like. I forget how I configured the Linux boot manager, yaboot. I may have skipped it or had it installed in the linux partition.
Ubuntu
The Ubuntu folks stopped supporting the power PC a while back. You will have to install an older version of Ubuntu.
You may to modify xorg.conf. See:
http://ubuntuforums.org/showthread.php?t=219532
Mac G3 modem install Howto
http://ubuntuforums.org/showthread.php?t=355205
You may have adjust adjust xorg.conf. See these instructions:
http://ubuntuforums.org/showthread.php?t=234437
I was able to get the last official versions of Ubuntu working on my G3 600.
6.10 Edgy Eft,
6.06 Dapper Drake
I used the alternate install and did the alterations noted above.
These versions are listed at the very bottom of the page.
https://wiki.ubuntu.com/PowerPCDownloads

HT5887 Why doesn't AirDrop work between iOS and OSX?

Apple has almost always never fail to seamlessly integrate its devices, until now? I understand that there is iCloud for content sharing between devices. However, AirDrop was introduced as a simpler way for users to not only share contents between their own devices but as well as other users. I understand that the logic behind AirDrop was practiced by windows users since the creation of modem, though it requires many complex steps and compatibility checks to achieve a simple logic. (and Windows never really bothered with perfecting it over all these years, its improved, still buggy)
My question is, why can't we share contents between iOS and OSX? Everytime I need to transfer some files/content, the quickest way I could think of is to send an email to myself. Just the other day I tried to have my colleague AirDrop a file from his 5S to my MBP. I told him with great confidence that this tech existed long ago, and finally Apple decide to kick some DOS *** and launch a super simple version. And that it should by right work with any device with BT and/or WiFi, but knowing Apple, it would only be for their own products. Not in my wildest dreams it didn't work cross OS.
Forget the embarassment, I want to be pampered by this seamless technology. I want the type of exclusiveness with my fellow family and friends of which majority are Apple lovers. I want to regain the confidence that whenever I step out of my room, whichever device I carry/left out, I can do/resume/engage everything as long as I carry an Apple device.
Music, Videos, E-mails, Docs, Images, iMessages, are all checked. So why not Content Sharing?

We would like to know the answer as much as you would. All you can to direct your questions to the only people who can really answer: http://www.apple.com/feedback/

Quark 7.3.1 and OSX 10.5.4

Similar Messages

Maybe you are looking for