QuarkXpress (Classic) new font installed but unavailable

I need Gill Sans in my QXpress in Classic. I even put it in every font folder in Tiger and in QX itself, but it's not available when I get into QX. I'm new to Tiger and frustrated. I use this font in AppleWorks all the time. How to access it in Classic program? Validate passed the font. Could have I installed it incorrectly since there's no hard manual with Tiger?

In Classic, only one font folder is relevant - the System 9 system folder's fonts folder (/System Folder/Fonts). Furthermore, the font must be in a format that is compatible with System 9; the Gill Sans that comes with Mac OS X is a .dfont, so it isn't. So the solution is simple: (1) Get yourself a version of Gill Sans that is compatible with System 9, and (2) put it in /System Folder/Fonts. You can obtain a PostScript version of Gill Sans (which will work with System 9) here:
http://www.myfonts.com/PurchaseOptions?familyid=3828&id[]=10956

Similar Messages

Adobe indesign cs4 (New font instalation)

How can I install new font from adobe Indesgn cs4?
Please help me to the procedure of install the new font!
I have use the following steps---
Windows>Control Panel>fonts>Install new fonts
But Its does not work.

>I have use the following steps---
>Windows>Control Panel>fonts>Install new fonts
That's not the way to do it, you need a couple more steps.
Insert the CS4 'Extras' DVD (something like that; it's clearly labeled). From within the "Install new fonts" dialog, browse to the DVD and in there to the folder containing the fonts you want to install. If you are there, wait a bit while the list is being read. If the list fills up, select the ones you want to install (or simply choose "Select All") and press OK.
(Note that this has
i nothing
to do with InDesign. It's your basic Windows base. Buy any guide and you'll find it there.)

Firefox installed in Archlinux can display fonts after a new fonts installed

Hi! I'm a Linux user. Recently I migrate to Archlinux. At first time I used Firefox without issues. Then in the process the install and config software and the distro I installed new fonts. That fonts I used in IBM Linux distro, OpenClient based on RHEL 6.5. Thats fonts are a backup of that machine. The set of fonts include around of 4000 fonts: Windows 7 Fonts, Google Fonts, Droid and others. In RHEL I have not issues with this fonts. The fonts groups are:
<pre><nowiki>[elrengo@xpsl421x .fonts]$ ls -l
total 272
drwx------ 1 elrengo users 4096 Sep 8 2010 AnonymousPro-1.002.001
drwx------ 1 elrengo users 4096 Sep 8 2010 AnonymousProMinus-1.002.001
drwx------ 1 elrengo users 4096 Feb 27 2011 dejavu-fonts-ttf-2.33
drwx------ 1 elrengo users 4096 Jun 10 2013 DroidFamily
drwx------ 1 elrengo users 135168 Jun 4 2012 googlefontdirectory
-rw------- 1 elrengo users 58464 Jun 10 2013 Inconsolata.otf
drwx------ 1 elrengo users 65536 Oct 3 2013 Windows7Fonts
[elrengo@xpsl421x .fonts]$ </nowiki></pre>
But in Archlinux after fonts installation Firefox can not show fonts, and I can not write in textbox. I do:
* Reset Firefox to defaults --> Do not works.
* Uninstall Firefox / Re install Firefox --> Do not works.
* Reinstall fontconfig package in Archlinux. --> Do not works.
* Update font cache --> Do not works.
The screenshot --> http://i.imgur.com/aIZvv6n.png
If need it something more please let me know
Thanks in advance!
Kind regards

If [https://wiki.archlinux.org/index.php/firefox#Firefox_variants Firefox ]does not anti-alias and/or hint your fonts, try to install [https://aur.archlinux.org/packages/ttf-win7-fonts/ ttf-win7-fonts] (preferred) or [https://aur.archlinux.org/packages/ttf-ms-fonts/ ttf-ms-fonts] and take a look at [https://wiki.archlinux.org/index.php/Font_configuration Font configuration].

KDE: After new font install Times New Roman lags/crashes OpenOffice

Hallo all,
This problem has been troubling me since I first switched to Linux with Open Suse a couple years back. I got around it on Kubuntu without installing new fonts...
But the other day I decided to give it a go, thinking it might be a bug in KDE3 that was fixed in 4. So I installed a ton of fonts for Photoshopping and now, just like the first time, Times New Roman looks ugly in OpenOffice and if I'm trying to open a document that's .doc or .rtf and written in Times it lags Writer and typically crashes instead of opening. This is a problem since friends send me stuff all the time and they are Windows users.
Strangely if I print with Times it looks like it's supposed to but otherwise it's ugly. It looks this way in KOffice, too. I'm not so much concerned with that as I am with the lagging and crashing Writer, though.
If this is a bug then it must be pretty old. Has anyone else encountered this before?
The Defaults button is also grayed out in the KDE Font Installer. Anyone know why? If I can just revert to default with fonts then I will.
Thanks!

Thanks for the reply!
I have installed the MS fonts. I also tried uninstalling and reinstalling it. This problem only started when I installed a bunch of new fonts that I've collected over the years for Photoshopping.
Using the replacement thing doesn't work, either; whenever I open a Times New Roman doc the font is still the same. It only freezes or crashes for really long documents but that's still a problem for me. Also it looks really ugly.
I'd honestly be fine if I could just restore the defaults but the Defaults button is grayed out in the font installer
I only assume that that would fix it, though. I think the problem is that one of the fonts I installed messed up Times New Roman. The problem is that I've got hundreds of em and I don't know which ones are mine and which ones came with KDE/MS fonts.

In 3210xi, new cartridges installed, but yellow not recognized

3210xi will not recognize new yellow cartridge. All cartridges are new HP cartridges, but yellow keeps indicating "missing or damaged." Have followed cleaning instructions. Same result.

Hello there! Welcome to the forums!
@annoyance
I understand you have all new HP cartridges installed in your Photosmart 3210xi however, the yellow is not being recognized and you're seeing an error message stating the ink cartridge is "missing or damaged".
I wanted to reach out and share my suggestion with you. After looking through troubleshooting guides, I would recommend that you try the steps entailed in this specific document.
The Following Ink Cartridge(s) Appear to Be Missing or Damaged' Message Displays after a New Cartrid...
If the troubleshooting does not help at all, I would lastly suggest technical support.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Wishing you a great weekend!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

New fonts installed with Motion 5 and FCPX??

Anyone know if there are some new fonts imbedded into FCPX and Motion 5? Seems like I have at least 1 new font (Gaz) that does not appear in any other applications or in the Font Book app. (Gaz is what Mark Spencer uses in one of his new tutorials for Motion 5.)
If so, where are they and what other fonts are new/included? Kinda like to know those things.

Final Cut Pro X and Motion 5 have the following fonts built in to support the supplied Motion templates:
Banco Heavy.ttf
Bank Gothic Light.ttf
Bank Gothic Medium.ttf
Blair Medium.ttf
Bradley Hand Bold.ttf
ComicScript.ttc
Coolvetica.ttf
Duality.ttf
Edwardian Script.ttf
Flatbush Bold Oblique.ttf
Flatbush Bold.ttf
Forgotten Futurist Bold Italic.ttf
Forgotten Futurist Bold.ttf
Franklin Gothic Demibold.ttf
Gaz Transport.ttf
Goudy Old Style Bold.ttf
Goudy Old Style.ttf
Handwriting Dakota.ttf
HumanaSerif.ttc
Korataki.ttc
Meloriac.ttf
Misadventures Black Italic.ttf
Misadventures Black.ttf
Octin Team Heavy.ttf
Paleographic Thin.ttf
Paleographic.ttf
Proxima Nova.ttc
Scheme.ttc
Sign Painter House Script.otf
Snell Roundhand.ttc
Strenuous.ttf
Superclarendon Bold.ttf
Superclarendon.ttf
Synchro LET.ttf
Zingende Regular.ttf
These fonts are stored in Final Cut Pro or Motion in the following subfolder: Contents / Frameworks / TextFramework.framework / Versions / A / Resources / Fonts. To get inside Final Cut Pro or Motion, right- or control-click the application and choose Show Package Contents from the context menu.
They also have
FCMetro34.ttf
In Contents / Resources / Fonts - which is used to display timecode.

Installed new Font types but they do not appear in Premiere Pro

Hey there,
just wondering if you can help me I am doing product videos for a company and I downloaded some free fonts in order to have a wider variety. I downloaded them installed them and dropped them in the Font folder (I am working with a windows 7)
I wanted to create a title page and take a font that I had downloaded beforehand (I downloaded around 20 of them) but not one of them appears in my font library.
Does anyone know why this can be?
Greetings,
Mascha

Yes do appear in MS Word I just checked.
I have installed the Premiere Pro program on my account and I have another local server of the company where I have to sign in individually. If I check there on Word the font types do not appear!
Could it be that the settings of Premiere Pro are taking the font settings of that local server instead of my account even though I have installed the program there?
That's the only solution that I could actually think of, but even then I do not know how to fix it..

Apple ProRes QuickTime Decoder - Both types say I have "a newer version installed", but I can't view Pro-Res files on either type of machine.

I'm trying to view a Pro-Res file from Final Cut Pro on machines that have Quicktime Pro, but having no luck. I've tried installing the "
Apple ProRes QuickTime Decoder " for both Windows and Mac (on the correct machines), but I keep getting "You already have a newer version of this installed" on each machine, and can't finish. Needless to say, the Pro-Res file will not play on either machine, and there seems to be no way to remove a "newer version" and install this one. Thanks for any suggestions.

Rob,
There is no quicktime folder there. And no quicktime program is installed when I try to install iTunes. The only reason I tried installing quicktime in standalone was because the itunes install was not actively going to the quicktime part of its installation.
I've tried removing everything and only installing iTunes. But even after deleting the physical files, using the WIndows Install cleanup tool, and cleaning up my registry, the quicktime portion of the iTunes install doesn't complete, and I keep getting "unknown" errors from the crash prevention program, and from what I can see it's because there's no physical Quicktime program installed.
As for other accounts, no I cannot start it up with other accounts, I keep getting the "Unknown" error and there is no physical files for quicktime anywhere.
And selective startup doesn't seem to work as there is NO qttask option when I run selective startup.
So, I seem to be out of options, and thing else I could try?
~Jay

New pages installed but says I need to update Pages to open any of my previous pages documents

I recently upgraded OSX and upgraded Pages, now I can't open any of the documents previously written with pages. It
comes up that I need to upgrade and it is already installed.
I need to be able to open my documents!

Then you have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Once opened and saved in Pages 5.1 files can not be opened in Pages 5.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed almost 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

Tradition DAQ installed but unavailable

Hello,
I have a system that had LabVIEW v6.0.2 executables running with NI-DAQ 6.9.3f3 with a PCI-6052E. I have now installed LabVIEW 2009 with both Traditional NI-DAQ 7.4.4 and NI-DAQmx 8.9.5 on this system. My 6052E shows up in MAX under both NI-DAQmx Devices and Traditional NI-DAQ (Legacy), but under Legacy, the 'Test Panels...' button is grayed-out and if I get the properties of this device, the subsequent dialog's 'System' tab has the resources box grayed out as well as the 'Test Resources' and 'Run Test Panels' buttons grayed-out. I've tried resetting the device under DAQmx, but it doesn't help. I have run a self test of the 6052E by right-clicking the device under DAQmx and it passes.
Another problem I've noticed is when I try to run any traditional LabVIEW DAQ example, I get the following error repeatedly: "Error loading "C:\Program Files\National Instruments\LabVIEW 2009\vi.lib\Daq\lvdaq.dll". A dynamic link library (DLL) initialization failed." This occurs for every traditional DAQ VI that tries to load.
LabVIEW DAQmx examples load and run fine.
This sounds like a corrupt NI-DAQ (Legacy) installation. My goal is to get my code running under the latest NI-DAQ (Legacy), and then transition to DAQmx. What is the best way to proceed getting this new NI-DAQ (Legacy) to run?
Thanks,
Greg
Solved!
Go to Solution.

Got the problem solved by repairing the NI-DAQ 7.4.4 (Legacy) install via Windows 'Add or Remove Programs'.
Greg

New HD installed, but how to install OS?

My trusty PB lost it's factory hard drive this week. I've installed a new Samsung 160GB drive. Unfortunately, I can't for the life of me find my original PB disks (it's been almost 4 years!) It was running 10.5.1 perfectly prior to the drive failure. It also ran 10.4 long-term.
I have retail versions of OS 10.4 and 10.5 family packs. I used these same disks to do system upgrades to the PB in the past.
10.4 runs the installer, but tells me it can't be installed on this machine. (Disk Utility successfully identifies, partitions and verifies the new Drive).
10.5 spits the disk out on boot-up.
I can't seem to successfully mount a disk from another machine over Firewire.
What are my options? I presume that one is to contact Apple for replacement disks - can't find ANY reference to that process on their site; a link would be greatly appreciated. Is inconvenient-hours Phone Support the only way to do it?
Any suggestions greatly appreciated.

Thanks for the thought, Mark, but as mentioned, Disk Utility worked fine off the OS 10.4 install disk. Unfortunately, it wouldn't install anything, though.
I've solved the issue myself, so thought I'd post the answer for the benefit of others in the same situation.
Thankfully, I used Time Machine to archive the PBs hard drive after I installed the OS and software. I still had that November archive on a Firewire drive. I couldn't boot off the Firewire drive OR the OS 10.5 disk, however. But I COULD boot the PB in Firewire Target Mood (boot system while holding "T" key). So I did.
I then connected the PB to a MacPro via Firewire. The Intel vs. PPC mismatch meant I couldn't just do a system install onto the PB drive from the MacPro.
The MacPro is still running OS 10.4, so I had to boot the MacPro with the OS 10.5 install disk, then start Disk Utility and choose the Time Machine Restore function.
The PB drive was restored to the same state it was in in November, which meant I didn't need to re-install third party software or anything. I'm SOLD on Time Machine!

New software install but files are old

I just got a Palm Centro. I've had a Palm 505 for years, had Palm desktop on my Vista computer for 1 1/2 years. I installed the Palm Desktop software that came with my Centro on my Vista computer and my calendar, memos, addresses all look like they did 1 1/2 years ago. I had synced immediately before installing the new software. I had a back up of my folder with all these files, so I replaced my folder "Kris" with address, datebook, etc files. I closed Palm Desktop and restarted it. No luck, I still have all my old info - not up to date. I have not synced my phone with the computer since this isn't right. And, I'm afraid to sync my current palm and lose everything off there (since my "backup") didn't seem to work. Help! How do I get all my current info back?!
Post relates to: Centro (Sprint)
This question was solved.
View Solution.

Did you install the version of Palm desktop that you got with the Centro, 6.2?
There is a procedure to try to recover your files. Look in the following location for the Palm desktop username folder.
C:\Users\(Windows username)\Documents\Palm OS Desktop\
Look in the username folder for the category folders, address/contacts, datebook/calendar, etc. In those folders are the data files. Look for the files with names like address.mdb, address.mdb.bak. The .mdb file is the current data file, the .mdb.bak is the backup file. Try to rename the .mdb file to .mdb.old. Then rename the .mdb.bak file to .mdb (remove the.bak extension). Open Palm desktop and see if the data is there. IF you don't have the .bak file then you cannot rename to recover the data.
When you upgrade to a new device using palm desktop 6.2, the files from the old version of Palm desktop in the username folder are not compatible. You cannot drag and drop the files into the new username folder. The data files in Palm desktop 6.2 are in a Microsoft Access Datbase format, thus the .mdb extension.
See if you can rename the .mdb files first to see if you can recover the data. If you can't using that method, you can "clean" uninstall the Palm desktop currently installed, install the version you were working with before the upgrade, copy the Username folder you backed-up from the old version and paste it in the old Palm desktop folder. Open Palm desktop and see if the data is there. Another option is to sync the old device to the old version of Palm desktop and then export the data.
Once that is installed and you have the data intact in the old version of Palm desktop, export the data, install the new Palm desktop and import the data. With the export and import procedure you can use the data in any version of Palm desktop.
If the rename doesn't work, do the "clean" uninstall using the directions below.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. If it asks
you for a username and you synced your device before, put in 'test" if you
did not sync before create a hotsync name.
Post relates to: Palm i705
Message Edited by cygnusX1 on 10-07-2008 04:00 PM

New iptables installed, but no email requst posseble?

Hi All
I installed new iptables rules (got from James Stephens ([email protected]) http://www.sns.ias.edu/~jns/ ) and now everything seems to be ok, as i am here, but kmail isn't able to load my emails down?!
i installed the rules, cause the iptables -L sayd there are no rules at all, and so i'm a bit paranoid of that.
Has anyone an idear? Here's my iptabels.rules:
#!/bin/bash
## Iptables example ruleset
## James Stephens ([email protected])
## http://www.sns.ias.edu/~jns/
modprobe ip_tables
modprobe ip_conntrack
modprobe ip_conntrack_ftp
iptables -F
iptables -X
iptables -Z
iptables -P INPUT DROP
iptables -P FORWARD DROP
iptables -P OUTPUT DROP
IFACE="ath0"
IPADDR="my ip, no dhcp"
NAMESERVER_1="server1"
NAMESERVER_2="server2"
BROADCAST="net broadcast"
LOOPBACK="127.0.0.0/8"
CLASS_A="10.0.0.0/8"
CLASS_B="172.16.0.0/12"
CLASS_C="192.168.0.0/16"
CLASS_D_MULTICAST="224.0.0.0/4"
CLASS_E_RESERVED_NET="240.0.0.0/5"
P_PORTS="0:1023"
UP_PORTS="1024:65535"
TR_SRC_PORTS="32769:65535"
TR_DEST_PORTS="33434:33523"
/bin/echo "1" > /proc/sys/net/ipv4/icmp_echo_ignore_all
/bin/echo "1" > /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts
/bin/echo "0" > /proc/sys/net/ipv4/conf/all/accept_source_route
/bin/echo "0" > /proc/sys/net/ipv4/conf/all/accept_redirects
/bin/echo "1" > /proc/sys/net/ipv4/icmp_ignore_bogus_error_responses
for interface in /proc/sys/net/ipv4/conf/*/rp_filter; do
/bin/echo "1" > ${interface}
done
/bin/echo "1" > /proc/sys/net/ipv4/conf/all/log_martians
/bin/echo "0" > /proc/sys/net/ipv4/ip_forward
############ Rules
iptables -A INPUT -i lo -j ACCEPT
iptables -A OUTPUT -o lo -j ACCEPT
## SYN-FLOODING PROTECTION
iptables -N syn-flood
iptables -A INPUT -i $IFACE -p tcp --syn -j syn-flood
iptables -A syn-flood -m limit --limit 1/s --limit-burst 4 -j RETURN
iptables -A syn-flood -j DROP
## Make sure NEW tcp connections are SYN packets
iptables -A INPUT -i $IFACE -p tcp ! --syn -m state --state NEW -j DROP
## FRAGMENTS
iptables -A INPUT -i $IFACE -f -j LOG --log-prefix "IPTABLES FRAGMENTS: "
iptables -A INPUT -i $IFACE -f -j DROP
## SPOOFING
iptables -A INPUT -i $IFACE -s $IPADDR -j DROP
# Refuse packets claiming to be from a Class A private network.
iptables -A INPUT -i $IFACE -s $CLASS_A -j DROP
# Refuse packets claiming to be from a Class B private network.
iptables -A INPUT -i $IFACE -s $CLASS_B -j DROP
# Refuse packets claiming to be from a Class C private network.
iptables -A INPUT -i $IFACE -s $CLASS_C -j DROP
# Refuse Class D multicast addresses. Multicast is illegal as a source address.
iptables -A INPUT -i $IFACE -s $CLASS_D_MULTICAST -j DROP
# Refuse Class E reserved IP addresses.
iptables -A INPUT -i $IFACE -s $CLASS_E_RESERVED_NET -j DROP
# Refuse packets claiming to be to the loopback interface.
# Refusing packets claiming to be to the loopback interface protects against
# source quench, whereby a machine can be told to slow itself down by an icmp source
# quench to the loopback.
iptables -A INPUT -i $IFACE -d $LOOPBACK -j DROP
# Refuse broadcast address packets.
iptables -A INPUT -i $IFACE -d $BROADCAST -j DROP
## DNS
iptables -A INPUT -i $IFACE -p udp -s $NAMESERVER_1 --sport 53 -m state --state ESTABLISHED -j ACCEPT
iptables -A INPUT -i $IFACE -p udp -s $NAMESERVER_2 --sport 53 -m state --state ESTABLISHED -j ACCEPT
# Allow UDP packets to DNS servers from client.
iptables -A OUTPUT -o $IFACE -p udp -d $NAMESERVER_1 --dport 53 -m state --state NEW,ESTABLISHED -j ACCEPT
iptables -A OUTPUT -o $IFACE -p udp -d $NAMESERVER_2 --dport 53 -m state --state NEW,ESTABLISHED -j ACCEPT
## SSH usualy used, instead of Telnet below
# Allow ssh outbound.
### Actually we don't need it and havn't miss is in the past
iptables -A INPUT -i $IFACE -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT
iptables -A OUTPUT -o $IFACE -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT
## TELNET old, usualy SSH is used
# Allow telnet outbound.
## iptables -A INPUT -i $IFACE -p tcp --sport 23 -m state --state ESTABLISHED -j ACCEPT
## iptables -A OUTPUT -o $IFACE -p tcp --dport 23 -m state --state NEW,ESTABLISHED -j ACCEPT
## WWW
# Allow www outbound to 80. http://
iptables -A INPUT -i $IFACE -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT
iptables -A OUTPUT -o $IFACE -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT
# Allow www outbound to 443. https://
iptables -A INPUT -i $IFACE -p tcp --sport 443 -m state --state ESTABLISHED -j ACCEPT
iptables -A OUTPUT -o $IFACE -p tcp --dport 443 -m state --state NEW,ESTABLISHED -j ACCEPT
## FTP
# Allow ftp outbound.
iptables -A INPUT -i $IFACE -p tcp --sport 21 -m state --state ESTABLISHED -j ACCEPT
iptables -A OUTPUT -o $IFACE -p tcp --dport 21 -m state --state NEW,ESTABLISHED -j ACCEPT
# 1) Active ftp.
iptables -A INPUT -i $IFACE -p tcp --sport 20 -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A OUTPUT -o $IFACE -p tcp --dport 20 -m state --state ESTABLISHED -j ACCEPT
# 2) Passive ftp.
iptables -A INPUT -i $IFACE -p tcp --sport $UP_PORTS --dport $UP_PORTS -m state --state ESTABLISHED -j ACCEPT
iptables -A OUTPUT -o $IFACE -p tcp --sport $UP_PORTS --dport $UP_PORTS -m state --state ESTABLISHED,RELATED -j ACCEPT
## SMTP
iptables -A INPUT -i $IFACE -p tcp --sport 25 -m state --state ESTABLISHED -j ACCEPT
iptables -A OUTPUT -o $IFACE -p tcp --dport 25 -m state --state NEW,ESTABLISHED -j ACCEPT
## AUTH server (I actually don't know what this means)
## iptables -A INPUT -i $IFACE -p tcp --dport 113 -j REJECT --reject-with tcp-reset
## TRACEROUTE
iptables -A OUTPUT -o $IFACE -p udp --sport $TR_SRC_PORTS --dport $TR_DEST_PORTS -m state --state NEW -j ACCEPT
# ICMP
iptables -A INPUT -i $IFACE -p icmp -m state --state ESTABLISHED,RELATED -j ACCEPT
# We always allow icmp out.
iptables -A OUTPUT -o $IFACE -p icmp -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
## LOGGING
# Any udp not already allowed is logged and then dropped.
iptables -A INPUT -i $IFACE -p udp -j LOG --log-prefix "IPTABLES UDP-IN: "
iptables -A INPUT -i $IFACE -p udp -j DROP
iptables -A OUTPUT -o $IFACE -p udp -j LOG --log-prefix "IPTABLES UDP-OUT: "
iptables -A OUTPUT -o $IFACE -p udp -j DROP
# Any icmp not already allowed is logged and then dropped.
iptables -A INPUT -i $IFACE -p icmp -j LOG --log-prefix "IPTABLES ICMP-IN: "
iptables -A INPUT -i $IFACE -p icmp -j DROP
iptables -A OUTPUT -o $IFACE -p icmp -j LOG --log-prefix "IPTABLES ICMP-OUT: "
iptables -A OUTPUT -o $IFACE -p icmp -j DROP
# Any tcp not already allowed is logged and then dropped.
iptables -A INPUT -i $IFACE -p tcp -j LOG --log-prefix "IPTABLES TCP-IN: "
iptables -A INPUT -i $IFACE -p tcp -j DROP
iptables -A OUTPUT -o $IFACE -p tcp -j LOG --log-prefix "IPTABLES TCP-OUT: "
iptables -A OUTPUT -o $IFACE -p tcp -j DROP
# Anything else not already allowed is logged and then dropped.
# It will be dropped by the default policy anyway ........ but let's be paranoid.
iptables -A INPUT -i $IFACE -j LOG --log-prefix "IPTABLES PROTOCOL-X-IN: "
iptables -A INPUT -i $IFACE -j DROP
iptables -A OUTPUT -o $IFACE -j LOG --log-prefix "IPTABLES PROTOCOL-X-OUT: "
iptables -A OUTPUT -o $IFACE -j DROP
####### THE END
so what?

I'm not a iptables guru, but i can't find any imap/pop rule that accepts thouse ports.
And in your scripts the defaults are DROP so that can be it.
Maybe that is the problem?

Creative Cloud says new Photoshop installed but old version remains

Today, I attempted to update Photoshop CC (2014) and Bridge to new versions.
The installation appeared to complete and Creative Cloud said the apps are up to date, but they remain the previous versions.
What can I do to rectify this?

Well, I must have been mistaken because it says there is no newer version -- and yet when I updated to the new Lightroom CC this evening the Creative Cloud App said there were also updates to Photoshop CC 2014 and to Bridge. And then it said it installed these.
And my applications folder shows changes to the contents of the Photoshop and Bridge folders at the time I did the updates.
However the apps themselves remain the same with Photoshop still being 2014.2.2.
I apparently leapt to the wrong conclusion.
Thanks very much for your help.

Certain symbol fonts installed but not working, please advise

I'm trying to edit an entire website in Flash that uses Zapf Dingbats font symbols. I had upgraded my computer since last working on the website and had not re-installed the font, so I did so with my copy of the font suitcase. FontBook installs and displays it correctly, but no applications on my Mac will display the font properly—when I select it, I just get regular alphabetic characters. I tested some other fonts and found another that does the same thing: Apple Symbols, which was pre-installed on my computer. I tried restarting to no avail.
What could be causing these fonts not to work properly? Thanks in advance!

Oh thank you so much for this tip! It does work to insert symbols from all the various fonts that offer them, but it doesn't explain why one can no longer choose Dingbats from the font menu and type the various characters, nor why all my Zapf Dingbats symbols in all my Flash animations now show up as "+" symbols (and Flash warns me that Zapf Dingbats is not installed on my system when opening the files, even though it is).
However, your tip has allowed me to find the symbol I need in Pages, then copy and paste it into Flash. I will have to replace dozens and dozens of instance of this symbol in my Flash files, but at least it works!
Thanks again for taking the time to help.

QuarkXpress (Classic) new font installed but unavailable

Similar Messages

Maybe you are looking for