Quarter of upper part screen is different colour
hi everyone-
just wonder if any one else have the same problem- my top part of macbook screen where the apple logo is present has different colour to about the quarter of the length till the "GO" - this has happened after i have upgraded to leopard- no other visual problems noticed-- also i think the mac book have slowed down dramatically
any suggestions will be appreciated
I wouldn't know about the screen, as for the computer's speed, try doing a parameter RAM reset by rebooting, and before the computer starts up again, hold down Cmd-Opt-P-R and release AFTER you hear the startup chime for the THIRD time.
Similar Messages
-
when i make a video then is screen show different colour and they didn't make a video good? i m using a iphone 5. plz give me good advise... I buy this mobile two month ago...
Cannot recall the full line-up of Effects in Pr 6.5, but you should have the fixed Effect>Motion>Scale, which will allow you to resize the Clip. You might need to use Motion>Position in addition. Basically, you will doing a PiP (Picture in Picture), with no Clip below, just the black showing.
Good luck,
Hunt -
I dropped my phone accidently but the screen didn't break and it was fine when I picked it up (I could view my lock screen). After a couple of minutes my screen went different colours with lines on the edges of it and a black mark in the corner. How can I fix this?
Try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. If that does not work, then the LCD has probably failed. Despite the fact that the glass did not break, it does not mean that it was not damaged. Make an appointment at the Genius Bar to have it looked at.
-
Upper part screen darkens after EFI 1.1 update
After the EFI 1.1 update I am experiencing some problems with the screen of my iMac core duo 20". In OSX, after my mac turns back on from sleep-mode, after a few seconds the upper part of my screen darkens. It looks like the backlite panel dims slightly on the upper part.
The strange thing is it doesn't happen when I boot in Windows XP with bootcamp. I thought I was experiencing hardware problems. But this can't be the case because it works fine in XP... AnyoneNope, didn't work.
Strange thing is: I've worked on my machine the whole day without any problem. But... when my iMac goes to sleep and wakes up, the problem appears in a few seconds. The whole screen darkens a few tints, and the upper part of the screen darkens a bit more.
If anyone knows a way to undo the 1.1 update. I can't find the 1.0 version anywhere on the apple site... -
The monitor is Philips brand and works perfectly fine usually. Every now and again it will happen mid-use and I have to constantly re-start my laptop.
The F7 key should also toggle between extended desktop and mirroring. If you open the lid on the PB, you should see that the F7 key is imprinted with two overlapping rectangles. That's supposed to represent the mirroring function and pressing the key should toggle the function (unless you had previously turned off the function keys).
-
have tried resetting and syncing several times, but its getting worse everyday
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost. -
I have a macbookpro with a second monitor connected using an Apple connector. The two screens show different parts of the desktop. My cat walked across the keyboard touching various keys, and now the two monitors are showing the same thing. How do I undo what the cat did?
Have you tried HELP in FINDER? If you open HELP and enter 'displays' in the field in the upper right hand corner you will get a list of topics on setting up monitors. Specifically read 'Setting up multiple displays to show the same image' and 'Setting up multiple displays as an extended desktop'.
Ciao. -
my ant video player after i updated to firefox four is now in the upper part of the screen where it opens up and i cant find out how to fix it
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
I was just sitting on the couch scrolling through facebook, I closed out of that and went to open safari, when it spazzed out, for a few mintutes it looked like LSD vision, it was all different colours and flickering the whole time. I turned it off and on again, and plugged it into my computer and now the right side is nearly completely blue, and bleeds to the left side with horizontal lines, and it is still flickering. I just finished paying the **** thing off. I thought I'd get another year out of it. I have taken exemplary care of it and it hasn't left the case since the day I bought it. I haven't dropped it, there was no warning for the screen to start doing this. So my question is, is there an easy fix (I am about to restore and update it, and I already played around with the screen brightness), and if not, am I going to have to pay for the screen to be replaced, because I don't have that kind money.
Probably sounded funnier in your head.
-
How to delete the upper part of screen
Hi everybody!!!
I'm using LV 6.0 to create an interface man/machine and i'd like to delete the upper part of my screen, where there are all buttons which that aren't usefull to users!!!
Is it possible??
thanks by anticipation.
LacouleIt depends on what the buttons are connected to. If you just delete the buttons (which you can!), you will get broken wires on the diagram. So, you first want to make sure you really don't need those buttons.
The easiest would be -- so as to not break the code -- to change those buttons into constants: right-click on them and select change to constant.
Again, it all depends on what the buttons are supposed to do.
-Khalid -
Source of light like a lamp appear in upper part of screen of my ipad
source of light like a lamp appear in upper part of screen of my ipad
Sounds like you have an issue with the back lighting. If under warranty, take to an Apple Store or an Authorized Apple Service Provider.
-
Why does the macbook air screen go blank in different colours intermittently?
why does the macbook air screen go blank in different colours intermittently?
This happens in all kinds of usage ... when typing, when browsing, when using the mouse to point and click, etc.?
-
hello,updated my ipod and it was working perfectly since i download the new upgrade it will turn on and the apple sign with come up but the screen will go different colours everytime i turn it on please may you help me fix this please?:)
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Why is my upper part of the screen is not working
my iphone 4 32 giga ios 5.0.1 screen is not 100% working, because the upper part of the screen is not really responding to me ,but the lcd screen is working fine, i cant swipe the notification screen down or use the apps in the top of the screen.
< Email Edited By Host >ok but the question is ,,,,,is my warranty working if i changed the broken screen from another fixing store "not apple " ...the screen looks like the old one but the upper part is not working ,,,and the fixer"not from apple" didnt know whats the problem with the new screen, i bought my iphone less than half year ago ,and if my warranty is still working where is the apple store located in Jordan ?
-
Upper Part of Iphone screen frozen
I just bought a new Iphone and found that the upper part of the Iphone is frozen. Pls help
Sorry to hear that. There have been various reports of this on this forum over the past few weeks. Unfortunately, there's nothing to be done about it except return under the warranty for a replacement.
Sorry not to be of more help to you. Good luck.
Maybe you are looking for
-
I've stuck with Entourage way too long. Now I don't dare install the Mavericks OS because all my Entourage files will go away. And my iMac won't open Mac Mail (probably because I've never opened it in the 5 - 6 years I've owned the Mac.) Any suggesti
-
Problem with ESB routing service
I have an ESB project that has a routing service to route a request message to 2 separate web services depending on some particular content in the message. simple classic content-based routing. i built a prototype on my local virtual machine, it work
-
I want to drag and drop a component like textbox in MS Word. I figured out that you can drag and drop image and text easily. However to drag and drop a component you may need JavaBeans Bridge for ActiveX. I did a little bit of research for this. I ca
-
450 host down to some domains.
We could not send mails to some domains, the message is 450 host down. When I try to do dnsstuff check on those domains, this is what I get, is this really normal. Your 1 MX record is: 10 mx.company.com [TTL=86400] IP=6x.1xx.1xx.1aa [TTL=86400] [IT]
-
Auto add test insignia in non-production environment
I would like to add a graphic or insignia (like a watermark) that indicates a report has been run in a test environment as opposed to production. I'm using 10g AS. Is their any way to configure the Reports Server to add something (a graphic file or ?