Quarterly Patches for OEM

Greetings,
I have completed the upgrade/installation of OEM 12.1.0.3.0 and most of the agents. My OMS and repository are on separate Linux servers. I am now faced with applying quarterly patches to my installation. The RDBMS is not an issue, it is the OMS & Weblogic server which have me confused. Reading through the patch release notes and documentation I am not sure how to decide which, if any, patches apply to my installation. Which patches must I apply to my Weblogic server and which to the OMS? Is there one patch set which will patch everything in one pass? I would appreciate the benefit of anyone else's experience and guidance.
Thank you.
Bill Wagman

Others may correct me here, but my perception was
always that ...
Solaris Express is the work-in-progress
version of the next iteration of the OS.
(I consider it the beta of what will eventually
become Solaris.)
Thus it never gets patched, it gets replaced by the
subsequent release of Express.Correct.
I also consider OpenSolaris to be the alpha that
could evolve into Solaris Express.OpenSolaris is the open-source code base.
Solaris (and Solaris Express) is a specific distribution that uses not only OpenSolaris, but also some closed-source components.
Solaris Express is a snapshot of the current work on 'nevada', the next version of Solaris.
Darren

Similar Messages

  • Any patch for OEM 10.2.0.5 for OARCLE application management pack??

    We already have ORACLE Grid Control 10.2.0.5 (X86 version) on Linux server. We plan to install ORACLE Application Management Pack 3.0 into Grid Control 10.2.0.5.
    I heard there have patch need apply to Grid Control 10.20.05 before install Application management pack into it. Anyone know which patch?
    Thanks.

    I follow document 812315.1 and OAM installation gudie to install OAM 3.0 plug-in to OEM 10.2.0.5. Everything look fine on OEM server. I also follow 812315.1 and tried to install patchs on EBS R12.1 application server:
    3. Apply the following patches for Release 12.1 or higher
    Apply AD Patch 8414326: R12.AD.B:1OFF:12.1: INTEROPERABILITY PATCH FOR AMP-ACP 3.0
    Apply Interoperability Patch 7616161: R12.OAM.B 12.1 INTEROPERABILITY PATCH FOR AMP 3.0
    On R12.1 application server, I installed patch 8414326 and without problem. But when I tried to install patch 7616161 and I got error:
    AutoPatch error:
    This patch is not compatible with your current codelines.
    This patch is compatible with: entity 'oam' - codeline 'R12.OAM.A'.
    Your current on-site codeline for the entity 'oam' is: 'R12.OAM.B'.
    You should not apply this patch.
    Apply an equivalent patch that is compatible with your
    current codelines instead.
    any ideal????

  • Cpu patches for 12c OEM

    Hi,
    Has anyone deployed CPU patches for 12c OEM? In the recent Jul, 2012 CPU patch there is patch for Oracle Database Plug-ins, has anybody deployed this Jul ,2012 CPU patch for 12c OEM.
    Enterprise Manager Plugin for Database 12c Release 1, versions 12.1.0.1, 12.1.0.2 Enterprise Manager
    Thanks
    Amit

    I have requested the "on request" patch for the Oracle Database Management Plug-in for the 12.1.0.1 Home, but was told by Oracle Support that there was no patch. I am on Solaris Sparc 64. I looked at the CVE-2012-1737 advisory, and I am trying to figure out if the vulnerability does not apply to my platform, but frankly can't figure it out from that document, and the support person did not elaborate. Have you been given a patch?
    Regards,
    Peggy

  • Patch for State Quarterly Wage Listing

    Hi:
    I was asked to apply patch for State Quarterly Wage Listing (1st quarter 2012) - to be released on 4/2/12. Would you please tell me how to find the patch?
    Thanks and regards.

    Hi;
    Please see:
    First Quarter 2012 Patch Readme for Release 12.1.x [ID 1438004.1]
    First Quarter 2012 Patch Readme for Release 11i [ID 1437960.1]
    First Quarter 2012 Patch Readme for Release 12.0 [ID 1438003.1]
    Regard
    Helios

  • Where can I get Sp3 for OEM Win Xp pro?

    Where can I get Sp3 (DVD,CD, patch) for H.P. OEM Win Xp pro?

    Hi:
    Sorry, I really goofed that one up! 
    Somehow I posted a link to another reply I sent earlier.
    This is what you need.
    http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=24
    Paul

  • Patch for OMS...

    After I upgraded to 9.2.0.4. Should I also apply the patch for OMS?? There are many patches in the metalink for OEM, which one should I need?? Following is the link I downloaded OMS patch, is this the right one for 9.2.0.4 as well???Thanks..
    http://otn.oracle.com/products/oracle9i/htdocs/9iober2/obe9ir2/player_otn.htm

    Download the OEM consolidation patch for BUG 3023858 [ARU: 4835089] - for the Streams OEM Gui and Oracle Management Server. This patch is a consolidation of multiple patches with the Streams Wizard and is a generic patch for all platforms. The patch must be installed on both the server ( where your OMS is running) and the client (where you launch the OEM Console). You will need to restart the OMS. For further information, check the README file for the patch.

  • CPU/PSU Patching through OEM

    hi,
    We have large number of database in our environment. So we planned to do the CPU/PSU patching through OEM.
    So like to know the feasibility of doing from OEM whether we can or not? and is there any other security issue in doing so.
    I mean only with oracle user we can able to do the patching through OEM or we can do with any other user who has privilege.

    Please read
    Oracle® Enterprise Manager Administrator's Guide for Software and Server Provisioning and Patching
    10g Release 5 (10.2.0.5.0)
    3 Infrastructure Requirements
    http://download.oracle.com/docs/cd/B16240_01/doc/em.102/e14500/infrastructure_setup.htm#BABEIFBC
    For the correct setup to do you patching.
    Regards
    Rob
    http://oemgc.wordpress.com

  • AAC/MPEG-4 support patch for abcde

    I got bored to day and made up this patch for abcde that adds support for AAC using the M4A extension.
    It uses FAAC as the encoder and also patches abcde to version 2.2.3
    I have not tested it yet so bear with me...i'll post my test results later.
    You'll have to manually add the "M4AENCOPTS=" variable to the config
    usage is: abcde -o m4a
    UPDATED: fixed a plethora of typos
    another side note is the fact FAAC must be compiled with mpeg-4 support, the Archlinux package for FAAC isn't, so therefore this could be a problem unless you compile FAAC yourself. I submitted a feature request to get mp4 support added.
    the following is the 2.2.0 to 2.2.3 update+AAC patch. I will submit a AAC patch for the newest release to the developers of abcde later on.
    --- abcde-old-2.2.0 2005-03-08 12:42:14.000000000 -0500
    +++ abcde2 2005-03-08 12:11:07.000000000 -0500
    @@ -11,7 +11,7 @@
    # Copyright for this work is to expire January 1, 2010, after which it
    # shall be public domain.
    -VERSION="2.2.0"
    +VERSION="2.2.3"
    usage ()
    @@ -21,7 +21,7 @@
    echo "-1 Encode the whole CD in a single file"
    echo "-a <action1[,action2]...>"
    echo " Actions to perform (cddb,read,normalize,encode,tag,move,playlist,clean)"
    -echo "-A Experimental actions (retag, transcode)"
    +#echo "-A Experimental actions (retag, transcode)"
    echo "-b Batch mode: enable album normalization and nogap encoding"
    echo "-c <file>"
    echo " Specify a configuration file (overrides system and user config files)"
    @@ -366,6 +366,9 @@
    mpc)
    run_command tagtrack-$1 true
    + m4a)
    + run_command tagtrack-$1 true
    + ;;
    esac
    done
    @@ -489,6 +492,10 @@
    ## FIXME ## to the encoder ends up empty.
    run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $MPPENCODER $MPPENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" "$IN" "$OUT"
    + m4a)
    + # AAC/MPEG-4 format (.m4a) is done locally, with inline tagging.
    + run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $M4AENCODER $M4AENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" -w "$IN" -o "$OUT"
    + ;;
    esac
    done
    # Only remove .wav if the encoding succeeded
    @@ -737,6 +744,9 @@
    if [ "$INTERACTIVE" = "y" ]; then
    while [ "$DONE" != "y" ]; do
    read ERASEPLAYLIST
    + if [ "$ERASEPLAYLIST" = "" ]; then
    + ERASEPLAYLIST=e
    + fi
    case $ERASEPLAYLIST in
    e|E|a|A|k|K) DONE=y ;;
    @@ -764,7 +774,7 @@
    ARTISTFILE=$(mungefilename "$TRACKARTIST")
    # If we want to start the tracks with a given number, we need to modify the
    # TRACKNUM value before evaluation
    - if [ -n $STARTTRACKNUMBER ] ; then
    + if [ -n "$STARTTRACKNUMBER" ] ; then
    # Get the trackpadding from the current track
    CURRENTTRACKPADDING=$(echo -n $UTRACKNUM | wc -c)
    TRACKNUM=$( printf %0.${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - 1 ))
    @@ -843,7 +853,7 @@
    cdparanoia|debug)
    if [ "$WEHAVEACD" = "y" ]; then
    vecho "Querying the CD for audio tracks..."
    - TRACKS=$( $CDROMREADER -Q 2>&1 | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
    + TRACKS=$( $CDROMREADER -d $CDROM -Q --verbose 2>&1 | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
    CDPARANOIAAUDIOTRACKS="$TRACKS"
    else
    if [ -f "$ABCDETEMPDIR/status" ] && checkstatus cdparanoia-audio-tracks ; then
    @@ -1354,7 +1364,7 @@
    EDITCDDB=n
    fi
    if [ "$EDITCDDB" = "y" ]; then
    - CDDBDATAMD5SUM=$($MD5SUM "$CDDBDATA" | cut -d " " -f 1);
    + CDDBDATAMD5SUM=$($MD5SUM "$CDDBDATA" | cut -d" " -f1);
    # Use the debian sensible-editor wrapper to pick the editor that the
    # user has requested via their $EDITOR environment variable
    @@ -1387,7 +1397,7 @@
    # Some heuristics first. Look at Disc Title, and if it starts with
    # "Various", then we'll assume Various Artists
    - if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2 -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
    + if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2- -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
    echo "Looks like a Multi-Artist CD" >&2
    VARIOUSARTISTS=y
    else
    @@ -1470,7 +1480,7 @@
    echo "variousartiststyle=$VARIOUSARTISTSTYLE" >> "$ABCDETEMPDIR/status"
    if [ "$EDITCDDB" = "y" ] && [ "$UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE" = "y" ]; then
    - if [ $CDDBDATAMD5SUM != "" ] && [ $CDDBDATAMD5SUM != $($MD5SUM "$CDDBDATA" | cut -d " " -f 1) ]; then
    + if [ $CDDBDATAMD5SUM != "" ] && [ $CDDBDATAMD5SUM != $($MD5SUM "$CDDBDATA" | cut -d" " -f1) ]; then
    # This works but does not have the necessary error checking
    # yet. If you are familiar with the CDDB spec
    # (see http://www.freedb.org/src/latest/DBFORMAT)
    @@ -1577,7 +1587,7 @@
    WAVDATA="$ABCDETEMPDIR/track$UTRACKNUM.wav"
    OUTDATA="$ABCDETEMPDIR/track$UTRACKNUM.$OUTPUTTYPE"
    if [ -r "$CDDBDATA" ]; then
    - TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2 -d= | tr -d [:cntrl:])
    + TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2- -d= | tr -d [:cntrl:])
    echo "Grabbing track $UTRACKNUM: $TRACKNAME..." >&2
    else
    echo "Grabbing track $UTRACKNUM..." >&2
    @@ -1692,6 +1702,7 @@
    SPEEXENCODERSYNTAX=default
    MPPENCODERSYNTAX=default
    NORMALIZERSYNTAX=default
    +M4AENCODERSYNTAX=default
    OUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
    # Use the following VAOUTPUTFORMAT to revert to 2.0.x VA format:
    @@ -1738,6 +1749,7 @@
    SPEEXENC=speexenc
    # mpp (Musepack)
    MPPENC=mppenc
    +M4AENC=faac
    ID3=id3
    ID3V2=id3v2
    @@ -1773,6 +1785,7 @@
    SPEEXENCOPTS=
    # mpc
    MPPENCOPTS=
    +M4AENCOPTS=
    ID3OPTS=
    ID3V2OPTS=
    @@ -2039,6 +2052,7 @@
    spx) [ "$SPEEXENCODERSYNTAX" = "default" ] && SPEEXENCODERSYNTAX=speexenc ;;
    mpc) [ "$MPPENCODERSYNTAX" = "default" ] && MPPENCODERSYNTAX=mppenc ;;
    + m4a) [ "$M4AENCODERSYNTAX" = "default" ] && M4AENCODERSYNTAX=faac ;;
    *) echo "abcde error: Invalid OUTPUTTYPE defined" >&2
    exit 1
    @@ -2100,6 +2114,12 @@
    MPPENCODER="$MPPENC"
    esac
    +case "$M4AENCODERSYNTAX" in
    + faac)
    + M4AENCODEROPTS="$M4AENCOPTS"
    + M4AENCODER="$M4AENC"
    + ;;
    +esac
    # and which tagger
    @@ -2144,7 +2164,7 @@
    ${NEEDCOMMENTER+$VORBISCOMMENT} ${NEEDMETAFLAC+$METAFLAC}
    ${NEEDNORMALIZER+$NORMALIZER} ${NEEDEJECT+$EJECT}
    ${NEEDDISKTOOL+disktool} ${NEEDCDSPEED+$CDSPEED}
    - ${NEEDVORBISGAIN+$VORBISGAIN}
    + ${NEEDVORBISGAIN+$VORBISGAIN} $M4AENCODER
    do
    # Cut off the command-line options we just added in
    X=$(echo $X | cut -d' ' -f2)
    @@ -2207,37 +2227,6 @@
    esac
    fi
    -if [ "$STRIPDATATRACKS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
    - case "$CDROMREADERSYNTAX" in
    - cdparanoia|debug)
    - # cdparanoia can query the CD, so let's process the TRACKQUEUE list with the results.
    - if checkstatus cdparanoia-audio-tracks; then
    - CDTRACKQUEUE=$( cat $ABCDETEMPDIR/cdparanoia-audio-tracks )
    - else
    - ## FIXME ##
    - vecho "Querying the CD to obtain a list of valid audio tracks..."
    - $CDROMREADER -Q > $ABCDETEMPDIR/cdparanoia-query 2>&1
    - # Obtain a list of valid audio tracks from the results of the query
    - CDTRACKQUEUE=$( cat $ABCDETEMPDIR/cdparanoia-query | egrep '^[[:space:]]+[[:digit:]]' | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
    - fi
    - # Obtain the track padding value from the before-processing list and pad the CD list
    - TRACKNUMPADDING=$( echo $TRACKQUEUE | awk '{print $1}' | tr -d " n" | wc -c )
    - for TRACK in $CDTRACKQUEUE ; do
    - TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${TRACK} + 0 ))
    - PADNEWTRACKQUEUE=$(echo $PADNEWTRACKQUEUE $TRACKNUM)
    - done
    - CDTRACKQUEUE=$PADNEWTRACKQUEUE
    - # Now, compare if the values in the list are valid tracks in the CD
    - for TRACK in $TRACKQUEUE; do
    - if echo $CDTRACKQUEUE | grep $TRACK >/dev/null ; then
    - NEWTRACKQUEUE="$NEWTRACKQUEUE $TRACK"
    - fi
    - done
    - TRACKQUEUE="$NEWTRACKQUEUE"
    - esac
    -fi
    # Create playlist if needed (backgroundable) and start reading in tracks
    @@ -2446,7 +2435,7 @@
    # TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${UTRACKNUM} + 0))
    TRACKNUM=$UTRACKNUM
    CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
    - TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2 -d= | tr -d [:cntrl:] | sed 's/ +$//')
    + TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d [:cntrl:] | sed 's/ +$//')
    splitvarious
    fi
    fi
    the patches can also be found here http://www2.rudefyet.com:8080/patch
    please post any other issues you have

    not yet, i'm going to work all the kinks out before i submit it
    as of right now I noticed some major typos, on my part, that cause it to fail...i'm working on that right now

  • Not able to find out the OCT 2012 CPU patch for 11.2.0.3

    Hi
    I am trying to download the OCT 2012 CPU patch for the 11.2.0.3 to install on Linux x86-64 which is having OS of RHEL 5.7. I am able to get the OCT 2012 PSU patch which include the CPU patch too.
    Database 11.2.0.3.4 PSU Patch 14275605, or
    GI 11.2.0.3.4 PSU Patch 14275572, or
    But I just require only the CPU patch. Can anyone provide me the patch number or some link where I can download the Oracle CPU patch OCT 2012

    The given link take to the window where CPU patch for all the quarter available.
    The Critical Patch Updates released to date are listed in the following table.
    Critical Patch Update Latest Version/Date
    Critical Patch Update - October 2012 Rev 1, 16 October 2012
    Critical Patch Update - July 2012 Rev 1, 17 July 2012
    Critical Patch Update - April 2012 Rev 2, 19 July 2012
    If I click on Critical Patch Update - October 2012 its takes to the window for selectin the database version (11.2.0.3). From there it goes to the Patch Set Update and Critical Patch Update October 2012 Availability Document [ID 1477727.1] which I had already checked.
    There for the database products it shows the below option.
    Table 9 Patch Availability for Oracle Database 11.2.0.3
    +*<moderator edit - deleted MOS Doc content - pl do NOT post such content - it is a violation of your Support agreement>*+
    It doesnt have the sepreate CPU patch. The below CPU patch is for the OC4J. I had a check.
    Thanks
    SHIYAS M

  • Patch for modbin6-1.00.38.exe is out.. "2MBIOS.BIN can't open!" Solved.

    Hi mates,
    ive decide to make a patch for modbin6 1.00.38 to improve stability and minise risk of modding the BIOS. for users which is reading this post if never heard about MODBIN better avoid reading below. its nice program for basic BIOS mod, simple to use, but very danger in the same time couse mess with BIOS and inproperty using may couse disaster. im not gona advert or to invite persons to use it. just wana make this program to be used normally to bring stability and minise risk of making corrupted BIOSes.. for persons which is already using it and have experience with him or with person Enthu which is wana try it and they dont worry if mobo may caouse for trash. there is 2 reasons to making this patch.
       1. couse sometimes im using it there is features on it wchich gives basic stuffs, unlocking hidden features locked by manifacturer(sometimes really usefull especially for DIMM Vcore..). so there is a nasty bug on it which gona explain later. most of persons who is using MODBIN know about it. so that patch will spend me alot of time and minimise risk of mistake during avoiding bug couse operation need several procedure and automatised will risk free and much fastern.
       2. to bring ability for most stable operations to persons which is already using it when need.
    but lets talk about the patch. everyone know that nasty issue with MODBIN(made it by Borg N1,part from his collection). bug is program wont safe BIOS file  and quiting with Abnormal program termination.... gives this one message: !!!File
    2MBIOS.BIN can't open!Thanks for using ModBin6 1.00.38  how nice ...
    here is Borg N1 advices:
    Quote from: Borg Number One on 16-July-05, 05:24:51
    Hi.
    It is a kind of sad fact that many users just know how to use the mouse and keyboard. 
    Well, you have to configure your config.sys (Win9x/ME) or config.nt to run MODBIN6
    (e.g. MODBIN6 2.01.01 (06/25))
    in Windows prompt/console without problems.
    The " FILES " & " BUFFERS " values are the important values.
    http://www.xtremesystems.org/forums/showthread.php?t=45538
    http://www.xtremesystems.org/forums/showthread.php?t=63210&highlight=config.nt
    +++ BNOBTC & BNOBLG +++
    http://bnobtc.pix-art.com
    Borg advices is good but unfortuanly doesnt fix that bug... seems author dont have much idea why this is happend...error is constant ... Pure DOS also can't help... i wana add few more tips to the Borg's ones to improve stability when using  modbin, after that will talking about patch.
    TIP: navigate to this folder and open config.nt file:  %SystemRoot%\system32\config.nt
    at the end of file add this ones:
    dos=high, umb
    device=%SystemRoot%\system32\himem.sys /CPUCLOCK:ON /HMAMIN=64
    FILES=40
    BUFFERS=40
    STACKS=9,256            -----> Preserving 039A-045Eh   3,152   Sys  039Ah Stacks, 0552h DOSX
    Also MODBIN doesnt work well with long filenames.... etc "document and settings\my profile\desktp\modblabla" if not gona work property and there is a big chance of failure will load but after saving will have problems to update BIOS "core"(original.tmp) so always use 8.3 syntax standart .... best way from root directory make subdir whcih name to no NOT exceed 8 symbols... etc C:\123,C:\MYFLASH,C:\ROFL
    without TIPs it is really big gamble with BIOS....
    Aslo that will prevent Stack Overflow error when BIOS is loading....
    NOTE: To activate changes just quit from any DOS interpretators like(4nt,command.com,cmd and so on). and re-run it. Reboot OS is not requred.
    here how to do:
    Also when executing MODBIN put below executable file this ones without quotes "loadfix forcedos modbin6-1.00.38.exe"
    and ofcourse nasty error is waiting us... "2MBIOS.BIN can't open!Thanks for using ModBin6 1.00.38"
    Patch which iv maked gona RIP this error forever.
    Download: modbin6_1.00.38
    Download: MODBINPATCH
    What patch need? and how to use it? I named patch "Dynamic Patch for modbin" Couse isnt make modification on MODBIN program but momory his parent process when is loaded into memory.
    tips suggested below is recommended but not nesecery for the patch.. patch need MODBIN and your BIOS file (modbin6-1.00.38.exe and mybios.bin) to be copied to systemroot drive(usually C) in folder MSI etc put modbin6-1.00.38.exe and mybios.bin(BIOS which you gona mod) to C:\MSI
    Patch make checking if folder doesnt match will not continue....
    How to use it..... Copy modbin6-1.00.38.exe and mybios.bin to C:\MSI, then from command prompt navigate to C:\MSI and execute "loadfix forcedos modbin6-1.00.38.exe" after that load your BIOS file... when loading is complete navigate to your patch folder and execute patchMSI.exe.... takes 10 seconds to complete after that make active "white" window and enter "Q" then hit ENTER key both windows will be closed, after that return to your modbin window, make what you gona make and save BIOS file like normal procedure... Method is founded and tested by me from years below never let me down(never brings corrupted BIOS), but just today ive made patch couse was too lazy... also Borg's MODBIN can work with most of all chipsets which is using AWARD Modular based... NOTE: K9 isnt tested. the most of here you can view how exacly to do it and differents with and without patch:
    here is one more think some time maybe usefull from me:D
    Here is 1st little short trick:(no analog anywhere, like patch only here can be found if accepted):
    How to reset BIOS if you have nothink? Examples if you are administrator/PC-support or any and must fix same PC but the BIOS has an password?! And you dont have permision to open Case to reset CMOS(couse PC has an sticker with Warantly (and removing that sticker couse lost pc warrantly) You need access to BIOS to re-check,configure somethink there but its password protected. anyway there could be many situation. what we need? nothink special just bootable DOS(or analog- PC-DOS or whatever,doesnt matter where will boot(cd,flash disk,hdd)), no extended commands.[io.sys(jo.sys),command.com] - files requred to boot Here we go:
    boot from desired device.when you see command prompt etc.: "A:\,C:\"
    We will write a program without any languich..directly in PC code..(without compilator), direct in machine code.
    write this:
    copy con ffs.com|ffs          *comment None
    176.230p144144230q195     *comment Hold "ALT" and write number
    ^Z                                  *comment "CTRL+Z" then hit "Enter"
    Explain:
    copy(internal command)
    con (command line switch)
    ^Z (CTRL+Z)
    NOTE: Numbers in second line must be written with holdon "ALT" key and specified numbers.(ASCI Code). Non numbers symbols is normal keyboard selection. on input display should look like:
    copy con ffs.com|ffs                   
    ░.цpРРцq├                                 
    ^Z                                           
    Program is 9 bytes long... (simple but high effective)
    Thats it.Reboot Computer... password is gone. CMOS is reseted to default values. Tested on Award 4.0,6.0, AMI BIOS. Break all..
    and finaly again:
    **To All readers of this thread: Please note that this thread is with regards to Self-Modding BIOS and are of NO Official Testings from MSI. MSI will not be responsible for ANY Damage caused from requesting these self modded BIOSes! Please mind that you'll ONLY request and flash AT YOUR OWN RISK!!!** also MODBIN Author(Borg N1) and me is dont are NOT  responsible for ANY Damage caused by MODBIN or Add On Patch. (i didnt think there is risk exit must must said that warning....couse playing with BIOS is always risky). Happy Tweaking. 

    Well, I was wondering if the system not allowing the tty to change ownership -- but root also has the problem.
    You might try checking which shell is set for your users in /etc/passwd, and then check that the shell really exists at the specified path, and that it is executable.  You might also check that the home directory for you users (also specified in /etc/passwd) is mounted and your user has the appropriate rights to that directory.
    Other than that, I am running out of altitude, airspeed and ideas all at the same time.  There was one thing in your trace I did not understand.  Why is your system looking to the floppy drive?  I wonder if that is contributing to the problem.

  • Can someonoe please assist me in my Adobe Photoshop CS6 Extended.  I keep getting a 'Couldn't Complete Your Request because Dynamic Link is not Available?" Is there a way of getting a software patch for this problem?  I thought you didn't need extra softw

    Can someonee please assist me in my Adobe Photoshop CS6 Extended.  I keep getting a 'Couldn't Complete Your Request because Dynamic Link is not Available?" Is there a way of getting a software patch for this problem?  I thought you didn't need extra software.  My software other than that problem works fine.

    Couldn't complete what request?   Way more information please.
    What operating system?

  • Patch for Dreamweaver CS5 or 6 from Poodle Vulnerability

    GoDaddy ran a security patch for Poodle and now Dreamweaver can't connect. FTP over SSL/TLS explicit encryption is used. Is there a patch from Adobe for Dreamweaver?

    The perpetual license of CS6 is essentially Adobe's response to those folks who absolutely refuse to switch to the Creative Cloud Subscription plans. It's actually 3 versions (4 if you count Cloud CS6) removed from "current". Even though it's still available for purchase, it hasn't been receiving any updates and is getting further and further behind DWCC as time goes by.
    Adobe has a phone number, you just need to dig...
    Contact Customer Care
    Click Dreamweaver > How-to's and troubleshooting > Troubleshoot > click the big blue Still Need Help button
    That will give you Chat (if available) Phone (region specific) and Forums links

  • Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendor

    hello,
    After installing the Adobe reader, I got the following error message:
    Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendor

    For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).

  • I'm using my iPad with iOS v 6.1.3- is there a security patch for the SSL/TLS vulnerability for this, or do I have to go to 7.0.6?

    I'm using my iPad with iOS 6.1.3. Is there a security patch for this version, or do I have to update to iOS 7.0.6?

    There is an update for iOS 6... v6.1.6. But it is only available to iPhone 3GS and iPod touch 4th gen users. http://support.apple.com/kb/HT6146?viewlocale=en_US&locale=en_US
    For iPad, the highest supported os for iOS 6 is v6.1.3. If you want to get the security patch, you'll have to go to iOS 7.0.6.
    Hope this answers your question.
    ~Joe

  • Problem in applying the  6078836 OS Library Patch for Oracle HTTP Server

    Hi ,
    While installing Oracle ebusiness suite R12on a RHEL5 linux box (2.6.32-300.10.1.el5uek)
    After running the installation, the post-installation System checks revealed that the HTTP, Virtual Directory, Login Page, Help Page & JSP services were failing. All the errors have the same error code RW-50015. ! Require Installing an OS Library patch for HTTP server according to Note ID
    Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4) for Linux (32-bit) [ID 402310.1]     
    I am unable to stop the Database after stopping the Apps tier services.  while trying to login into sqlplus hitting up this Error ! Please Advise
    sqlplus: error while loading shared libraries: /oracle/VIS/db/tech_st/11.1.0/lib/libnnz11.so: cannot restore segment prot after reloc: Permission denied
    [Oracle@OracleLinuxServer 11.1.0]$ cd
    sqlplus / as sysdba
    sqlplus: error while loading shared libraries: /oracle/VIS/db/tech_st/11.1.0/lib/libnnz11.so: cannot restore segment prot after reloc: Permission denied
    Following is the Output of some commands which may help in understanding the Issue !
    *[Oracle@OracleLinuxServer ~]$ cd /oracle/VIS/db/tech_st/11.1.0*
    *[Oracle@OracleLinuxServer 11.1.0]$ find / -name libclntsh\* -ls 2>/dev/null*
    *142017047 13416 -rwxr-xr-x 1 applmgr oinstall 13712482 Dec 19 01:27 /oracle/VIS/apps/tech_st/10.1.3/lib/libclntsh.so.10.1*
    *142016603 0 lrwxrwxrwx 1 applmgr oinstall 17 Dec 19 01:27 /oracle/VIS/apps/tech_st/10.1.3/lib/libclntsh.so -> libclntsh.so.10.1*
    *142443526 13400 -rwxr-xr-x 1 applmgr oinstall 13696149 Dec 19 01:28 /oracle/VIS/apps/tech_st/10.1.2/lib/libclntsh.so.10.1*
    *142443190 0 lrwxrwxrwx 1 applmgr oinstall 17 Dec 19 01:28 /oracle/VIS/apps/tech_st/10.1.2/lib/libclntsh.so -> libclntsh.so.10.1*
    *89850399 36348 -rwxrwx--- 1 Oracle oinstall 37174788 Sep 12 2008 /oracle/VIS/db/tech_st/11.1.0/inventory/prereqs/bin/linux/libclntsh.so.11.1*
    *89719502 0 lrwxrwxrwx 1 Oracle oinstall 17 Dec 18 23:33 /oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so -> libclntsh.so.11.1*
    *89719501 36276 -rwxr-xr-x 1 Oracle oinstall 37100033 Dec 18 23:33 /oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1*
    id
    uid=2000(Oracle) gid=2000(oinstall) groups=2000(oinstall) context=root:system_r:unconfined_t:SystemLow-SystemHigh
    *[Oracle@OracleLinuxServer 11.1.0]$ env|egrep 'ORA|PATH' | sort*
    LD_LIBRARY_PATH=/oracle/VIS/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/oracle/VIS/db/tech_st/11.1.0/lib:/usr/dt/lib:/oracle/VIS/db/tech_st/11.1.0/ctx/lib
    LIBPATH=/oracle/VIS/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/oracle/VIS/db/tech_st/11.1.0/lib:/usr/dt/lib:/oracle/VIS/db/tech_st/11.1.0/ctx/lib
    ORACLE_HOME=/oracle/VIS/db/tech_st/11.1.0
    ORACLE_SID=VIS
    ORA_NLS10=/oracle/VIS/db/tech_st/11.1.0/nls/data/9idata
    ORA_TZFILE=/oracle/VIS/db/tech_st/11.1.0/oracore/zoneinfo/timezlrg.dat
    PATH=/oracle/VIS/db/tech_st/11.1.0/perl/bin:/oracle/VIS/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/oracle/VIS/db/tech_st/11.1.0/appsutil/jre/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/Oracle/bin:.
    SHLIB_PATH=/oracle/VIS/db/tech_st/11.1.0/lib:/usr/lib:/oracle/VIS/db/tech_st/11.1.0/ctx/lib

    Also I 've checked the /oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/opatch/ opatch_history.txt
    Find that the Patch version is same for every Patch: Please suggest..... Thanks!
    Following is the all contents of the file:
    *[Oracle@OracleLinuxServer opatch]$ vi opatch_history.txt*
    Command     : apply -verbose -silent /nfs/bld/d26/PRDXBLD9/apps/apps_st/comn/autobuild/patch/patch/7639602/7639602
    Log File    : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2009-03-25_23-17-01PM.log
    Date & Time : Wed Mar 25 23:18:41 PDT 2009
    Oracle Home : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0
    OPatch Ver. : 11.1.0.6.2
    Current Dir : /nfs/bld/d22/AB/autobuild/passwd
    Command     : apply -verbose -silent /nfs/bld/d26/PRDXBLD9/apps/apps_st/comn/autobuild/patch/patch/7627743/7627743
    Log File    : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2009-03-25_23-18-41PM.log
    Date & Time : Thu Mar 26 01:23:19 PDT 2009
    Oracle Home : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0
    OPatch Ver. : 11.1.0.6.2
    Current Dir : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0
    Command     : lsinventory
    Log File    : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2009-03-26_01-23-19AM.log
    Date & Time : Tue Mar 31 03:13:12 PDT 2009
    Oracle Home : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0
    OPatch Ver. : 11.1.0.6.2
    Current Dir : /nfs/bld/d22/AB/autobuild/passwd
    Command     : lsinventory -invPtrLoc /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/oraInst.loc
    Log File    : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2009-03-31_03-13-12AM.log
    Date & Time : Tue Mar 31 03:13:18 PDT 2009
    Oracle Home : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0
    OPatch Ver. : 11.1.0.6.2
    Current Dir : /nfs/bld/d22/AB/autobuild/passwd
    Command     : lsinventory -invPtrLoc /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/oraInst.loc
    Log File    : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2009-03-31_03-13-18AM.log
    Date & Time : Wed Dec 19 19:59:52 GMT+05:30 2012
    Oracle Home : /oracle/VIS/db/tech_st/11.1.0
    OPatch Ver. : 11.1.0.6.2
    Current Dir : /oracle/VIS/db/tech_st/11.1.0/OPatch
    Command     : lsinventory
    Log File    : /oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2012-12-19_19-59-52PM.log
    Date & Time : Thu Dec 20 00:03:59 GMT+05:30 2012
    Oracle Home : /oracle/VIS/db/tech_st/11.1.0
    OPatch Ver. : 11.1.0.6.2
    Current Dir : /home/Oracle/6078836
    Command     : apply
    Log File    : /oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2012-12-20_00-03-59AM.log
    Date & Time : Thu Dec 20 01:28:42 GMT+05:30 2012
    Oracle Home : /oracle/VIS/db/tech_st/11.1.0
    OPatch Ver. : 11.1.0.6.2
    Current Dir : /home/Oracle
    Command     : lsinventory -detail
    Log File    : /oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2012-12-20_01-28-42AM.log

Maybe you are looking for

  • What  are  the  parameters  which  control the  pop up  of  sales area

    Hi Experts What  are  the  parameters  which  control the  pop up  of  sales area  along with sales  office  when  Sold to party  is fed  in to the CRM order . I  have  an issue   that,  though  the  distribution channel  and  division  is  maintaine

  • BAPI_MATERIAL_SAVEDATA  Gross weight BRGEW

    Hello, searched the forum and found older entries regarding transfer of the gross weight with BAPI_MATERIAL_SAVEDATA. But all adivises I read do not help. I am aware how to use the BAPI and the tables. So here the facts: Base unit of measure and net

  • Should I be disappointed?

    My G3 just went to the kids and I was blessed with the new iMac 24" Intel. I have been so excited, yet after one month I have to admit, my former G3 "wonder" works better and faster. Could there be something wrong this, should I call the Mac Life sto

  • Storage limit

    my ipad is 16GB but when i try to record a video it says no storage left.  i checked in settings and it is showing total storage 5.gb and available 5gb so why is it not allowing me to record

  • Crash during firmware upgrd

    I've just been performing software updates to my Mac. When I restarted my machine to update the Firmware software my machine crashed. When I try to do a restart all I get is a blank screen. Can anyone give some ideas of what to do?