Quartz Composer not installing from .pkg on OSX 10.4 - help?

i don't know what's going on, but for some reason, the Quartz Composer app is not installing when i run the DeveloperTools.pkg
can anyone offer any advice/assistance or similar experience?
thanks

Welcome to Apple Discussions, magneticpitch!
I can't help you with your question, but I'd like to make a suggestion about using Discussions. In general, it is best to ask your question in only one forum at a time. That way all the answers are in one place, and it is easier for people trying to help to see what has already been suggested. If after a few days, you haven't gotten help in the one place you asked, it is appropriate to ask in another forum.
Good luck.

Similar Messages

  • I upgrade succesfully my laptop OS from mountain lion to maverick. i have my canon IR 2530 driver installed. after i reset my printer, the driver is not showing from Printer Software. could you guys help me to solve these problem?

    I upgrade succesfully my laptop OS from mountain lion to maverick. i have my canon IR2530 driver installed. after I reset my printer and add again(Canon IR2530), the driver is not showing from Printer Software. could you guys help me to solve these problem?

    Maybe this thread will help:
    https://discussions.apple.com/message/23873672#23873672

  • LR 5 does not install from my Creative Cloud

    LR 5 does not install from Creative Cloud but gives an error message "there were errors during installation (7). I am able to installa the trial version though even during this installation the updating LR 4 cataloque into LR 5 cataloque ended with an error message. Hoever the cataloque was OK in LR 5. The only problem was that aI could not licence the software into Creative Cloud. Still the Creative Cloud recognized the LR 5 and said the installation was OK. However I always had to check the "continue the trial box when starting LR 5. I removed the trial and tried to reinstalla LR five from Creative Cloud with the same result.
    Kari

    Hi
    I have had a chat with Adobe Technical Support and found a solution.
    Log out of Adobe Cloud
    In Windows use the Run command to run %temp%
    This will open the Windows temporary folder
    Delete all the files and folders in the temporary folder - there may be some foles/folders that can't be deleted but dont worry about those
    Sign back into the Adobe Cloud
    Install Lightroom  and wait for the installation to fail
    Use the Run command to run %temp%
    There will be a series of folders with filenames like {3F3A6C01-A6FA-4261-BD77-B128A5668697}
    Look through these folders until you find one that contains Lightroom Install file
    Run the installation file and the program should install manually
    Once completed you should be able to run Lightroom 5
    Logout and then login into Adobe Cloud - Lightroom should appear as installed.
    My Ligtroom is now working and I hope this works for you.
    Kind regards
    Steve

  • Hi, I can not instalation adobe acrobat 8 professional, can anyone help me?

    Hi, I can not instalation adobe acrobat 8 professional, can anyone help me?@

    Moved to Acrobat Installation & Update Issues

  • HT1553 my macbook pro is frozen and does not move from loading screen. Can you help?

    my macbook pro is frozen and does not move from loading screen. Can you help?

    Call Apple Support and schedule a appointment for a hardware check, or take it into a Apple Store.
    We can't help you with that problem.
    Good Luck

  • I do not remember my password of filevault and i can not install some softwares on my mac please help me

    i do not remember my password of filevault and i can not install some softwares on my mac please help me

    Are you sure FileVault is active? You could not have started up without entering the password.
    If you are sure, see below.
    If you forget the password and FileVault is on

  • I bought a iphone 3gs off a family member it says sim not installed to iPhone on iTunes can anyone help please ...?

    i bought a iphone 3gs off a family member and its on o2 i activated the o2 sim in a bb because o2 support advised me to activate on different phone as mine will not sync it says sim is not installed to iphone on itunes can anyone help please ...?

    cheers for the reply mate yeah she said that its locked to o2 so i done all i mentioned above also spoke to a o2 advisor and he didnt have a clue its stupid i have searched the internet for this problem and cant find a thing i cant be the only person to have it happen lmao its well annoying and stupid if you ask me nothing is simple these days ow well guess i will have to go to the apple store
    thanks again mate appriciate it

  • When i want delete music in my ipad i make sync in itunes without music but the music not remove from ipad i get problim please help me my email

    when i want delete music in my ipad i make sync in itunes without music but the music not remove from ipad i get problim please help me my email

    hi i think you can used itools is very esye for add and delete eny thing that is link http://www.itools.cn/multi_lang_pc_download.htm

  • Quartz Composer not responding on OSX 10.9.2. what to do?

    I am having issues whith Quartz Composer on Mavericks 10.9.2
    It doesn't even open it just says (Not Responding)
    I Use Quartz Composer at work on a mac retina that run Mountaint Lion 10.8.5 and works fine.
    What should I do? I dont want to roll back to Mountain Lion..

    I have it running  on 10.9.2, what version of QC do you have? I have 4.6

  • PSE 8 will not install on new imac OSX Snow Leopard

    28. Feb 26, 2010 4:16 PM in response to: docmark86
    Re: PSE8 will not install on Mac Snow Leopard 10.6.1
    I have a new iMac 21.5 screen with OSX Snow Leopard.  I installed IWork and turbo tax with no problem.  Nothing else.
    PSE 8 installation fails after about 80% installation just as install for PSE 8 starts. I've spent hours on the phone with Adobe and they blame it on OSX   Error analysis states:   "Uncaught JavaScript exception: Unable to read Adobe file version for path /Library/Fonts/MinionPro-Bold.otf  Apple techs have also tried."   The latest communications from Adobe instructs me on validating fonts.  We have also tried  CS3 Clean Script since the install failed several times. Case # is 0181442609.    Nothing works and Apple techs are still researching.  Any suggestions from an Adobe professional?  I am new to the Mac environment so any complicated actions may require some "hand holding".
    Thanks to all!
    Doc

    Doc, I would suggest go to the font location which from your post is: <Macintosh HD>/Library/Fonts/MinionPro-Bold.otf. There should be a font file with this name. If it exists, just "cut" it from this location and paste it on the desktop for some time and then try to install PSE again and see if that works.
    If the font file doesnt exist and instead an empty folder names "MinionPro-Bold.otf" exists, then delete the folder and then try to install PSE again.
    In either case, please do attach the installer log file in the forum thread so that I can have a look at it. They can be located at the below location:
    <Macintosh HD>/Library/Logs/Adobe/Installer/"...Adobe Photoshop Elements 8.0...."
    If there are multiple copies of the installer log files, then please delete them and then try to install PSE 8 again. If it fails, quit the installer and attach the new log files which are generated to this thread.
    Regards,
    Ankush

  • 10.6 Will not install from disc to a S.M.A.R.T. verified, zero-wiped, manufacturer's original, internal hard-drive.

    I recently wiped my main drive using zero-data process.  It seems to be "okay" when verifying its integrity.  It is also "verified" according to S.M.A.R.T.
    10.6 from Apple's Installation Disc will not install.  It makes 20 estimated minutes remaining, then tells me it cannot copy necessary files.  Is my superdrive defective out-of-box and also a year later or is my installation disc a defect?  Online communities fail to provide any other causes.
    By the way, using Recovery HD to download and install Lion is a failure.  It tried three times, each ending in failure, unable to verify said package.  Apple, try harder.
    [email protected]

    I think my superdrive might be defective.  It ratchets an awful lot while trying to copy necessary files for installing Snow Leopard.  I am taking to a Genius Bar, running a hardware test consistently gets locked up.  Here is more on that!:
    Inserted retail Hardware Test disc, booted holding D.
    Probing took 12 hours and counting, I hard reset my computer.
    (Suggested by others) I unplugged my Logitech mouse and, wow!, probing completed.
    During pass one of mem test, it locked up showing no progress for an hour-- hard reset!
    Apple's Hardware Test was a total failure on my end.  An ethernet connection to a router and my Apple keyboard were the only things connected to my 2011 iMac while booting to this hardware test!  Bummer!  I trust my Apple team will have better diagnostic equipment.
    Can Apple Hardware Test even determine if an iMac's superdrive is bad?

  • Flash will not install from CS4 Web Premium on XP

    I installed CS4 Web Premium a while back and, since I do not do a lot of Flash development, I didn't realize right off that Flash CS4 did not install. However, I just tried to go back and install it from the DVD and it shows in the list but the box in front of it is uncheckable. The heading at the top says to check the boxes to install or reinstall the applications. Other programs such as Dreamweaver, Contribute, Acrobat, Illustrator, Photoshop, etc. can be checked but the box in front of Flash (and Soundbooth, etc.) are unresponsive. I do still have CS3 Web Premium on this machine which has Flash CS3 Professional and Flash CS3 Video Encoder as well as also still having Studio 8 and CS 2 with Flash 8 and Flash 8 Video encoder and InDesign CS2 & CS3, Visual Communicator, VlogIt, etc.. Do I need to remove any of those first? This machine is about 3 years old (Dell Optiplex GX620) running Win XP. I'm about to upgrade to a new machine in about a month that will be running Windows 7. So I will be doing a clean install of CS4 Web Premium then. But it would be nice to fix this so I can work on some Flash files before then. Any help would be appreciated. Thanks.

    Hi, I'm assuming you are using the Manual Install. Did you already Uninstall any current Flash Player version?
    If not, download and SAVE to your Desktop the Uninstaller:
    http://kb2.adobe.com/cps/141/tn_14157.html
    Then download and SAVE to your Desktop the Installer:
    http://www.adobe.com/products/flashplayer/fp_distribution3.html
      Use the EXE Installer for Windows and Internet Explorer. Use the EXE Installer for the plugin based browsers
    Then use the Administrator Account and CLOSE all browser Windows. Disable any instant messenger service from the system tray.
    Run the Uninstaller and reboot(restart) your computer.
    Then Run the Installer and reboot.
    That message appears because the IE browser window is open.
    Thanks,
    eidnolb

  • HT201272 Purchased application is not installing from iTunes to iPad

    Hello.
    I've purchased WhatsApp application from iTunes.
    Connect my iPad to the computer.
    Go to 'Apps':
    img: http://clip2net.com/s/4Xmlrb
    Clicked 'Install' on the app:
    img: http://clip2net.com/s/4XmmI9
    Clicked 'Apply':
    http://clip2net.com/s/4XmnU7
    After waiting it is not installed:
    http://clip2net.com/s/4XmDgq
    iTunes - up to date
    iOs - up to date
    Comuper - authorized
    No error messages, NOTHING! Just not installing.
    Why I am not allowed to install my purchased app??!!

    Any app can be purchased frome the iTunes store via the iTunes application on the computer.
    That does not change the fact that some apps are iPhone only, some are iPad only and some will work on any iOS device.  There are even apps that require a specific iOS version or higher.... all of which determines what will install on your specific iOS device.
    Read the requirements before purchasing apps so that you do not run into this issue in the future.

  • Photoshop Elements 10 for Mac not installing from DVD

    DVD or downloaded "trial" version of PSE 11 will not install on Mac running OS Lion (10.7.5).  Reparied Disk Permissions and still doesn't instal.
    When DVD gets installed, folders appear, click on Photoshop Elements, double click install.app, install runs then back to Finder screen.  Only installs a folder called "Adobe" under User > Applications.  Nothing inside folder to indicated software is installed.  Nothing gets installed in the generall Applications folder.  HELP!

    I figured the PSE 10 serial # would not work.  I'd be happy with just getting 10 to work.  This laptop was just put into use and I did a transfer from my old laptop so there may be files on this new one that I need to delete.  I've tried using an Adobe Uninstaller and it finds nothing to uninstall.  I did notice Photoshop Elelements Organizer is on here and working but not the Editor which is really what I use and need.
    Is there something I can download from Adobe to "clean" any files interferring with my new install?  Do I need to uninstall the Organizer as well?
    BTW, thanks for helping me.  I really appreciate it!

  • Extensions in Package.appxmanifest are not installed from store

    I use in my App the Microsoft AdMediatorControl, that has some problem with Nokia imaging and Microsoft OCR libraries. I gave "not registered" runtime errors.
    To solve that, I modified the Package.appxmanifest manually, and everything works fine when I install my App from Visual Studio.
    But when I create a package for the store, and install from there, the app crashes when it tries to use these libraries.
    My extensions in Package.appxmanifest:
    <Extensions>
    <Extension Category="windows.activatableClass.inProcessServer">
    <InProcessServer>
    <Path>WindowsPreview.Media.Ocr.dll</Path>
    <ActivatableClass ActivatableClassId="WindowsPreview.Media.Ocr.OcrEngine" ThreadingModel="both" />
    </InProcessServer>
    </Extension>
    <Extension Category="windows.activatableClass.inProcessServer">
    <InProcessServer>
    <Path>Nokia.Graphics.Imaging.dll</Path>
    <ActivatableClass ActivatableClassId="Nokia.Graphics.Imaging.StorageFileImageSource" ThreadingModel="both" />
    </InProcessServer>
    </Extension>
    </Extensions>

    Please keep the subject line reasonably short (same for you other two posts!). Don't duplicate the entire post.
    It also helps readability if you would use an occasional comma or period. The post is completely incomprehensible without.
    Let's assume you figured out how to do all this in the presence of an internet connection, there is really not much to change. Simply make sure that both computers are on the same local subnet and have a unique IP address. The rest stays the same. you can connect them to the same switch, ir you could even connect them directly to each other using a crossover cable (or even a regular ethernet cable if the adapters have atuo-crossover).
    LabVIEW Champion . Do more with less code and in less time .

Maybe you are looking for