Quartz Extreme not supported after 10.4.7 update

I recently updated to 10.4.7 and now quartz extreme is not supported.
How can I resolve this problem?
Mac Mini 1.42 GHz PowerPC G4 Mac OS X (10.4.7) 512 Mb RAM

Hi Dr. Smoke.
Many thanks for offering some advice so quickly.
1. The reason I believe Quartz Extreme is " not supported" is mainly because when i turn my mac on and start using OS X, if I am in say DVD player or might use a widget the screen is very "choppy". Not sure if this is clear, but the motion is choppy. When I checked my system profiler it showed:
ATI Radeon 9200:
Chipset Model: ATY,RV280
Type: Display
Bus: AGP
VRAM (Total): 32 MB
Vendor: ATI (0x1002)
Device ID: 0x5962
Revision ID: 0x0001
ROM Revision: 113-xxxxx-120
Displays:
GDM-400PS: (Sony trinitron)
Resolution: 1024 x 768 @ 75 Hz
Depth: 16-bit Color
Core Image: Not Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Not Supported
Rotation: Supported
Now, I just recently I decided to change my resolution and checked back with the system profiler and it said Quartz Extreme was supported. Core Image still says "Not supported".
Unless I manually change the res. everytime I use my mac it still keeps saying Quartz Extreme is not supported.
Can you tell me what is happening and is it fixable?
many thanks!
Con30

Similar Messages

Suddenly Quartz Extreme Not Supported

Just got my new 20" iMac G5. was enjoying the RSS and iTunes artwork screensavers only this morning and now after migrating from my G5 1.6 they're gone and system profiler now says Quartz Extreme Not Supported. Zapped Pram all software updated and done a couple of re-starts.
Can't think what I've done (or not) to screw up this feature
Any help welcome
G,

Ok update.... I followed directions here http://www.macfixit.com/article.php?story=20081110225534811 and Quartz Extreme is supported on both now, but i'm still getting the ugly scan line.
Profiler now reads
*Chipset Model: ATI,RadeonHD2600*
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x9583
Revision ID: 0x0000
ROM Revision: 113-B2250F-212
EFI Driver Version: 01.00.212
Displays:
iMac:
Resolution: 1920 x 1200
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Mirror: On
Mirror Status: Hardware Mirror
Online: Yes
Quartz Extreme: Supported
Built-In: Yes
2619:
Resolution: 1920 x 1200 @ 60 Hz
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: On
Mirror Status: Master Mirror
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Television: Yes
Something to do with Master Mirror/Hardware Mirror??

Core Image: Not Supported??? Quartz Extreme: Not Supported???

Hello! I'm new to this forum and I'm a Mac noob. I have a problem. For some reason my computer is saying Core Image and Quartz Extreme are not supported.
ATI Mobility Radeon 9700:
Chipset Model: ATY,RV360M11
Type: Display
Bus: AGP
VRAM (Total): 64 MB
Vendor: ATI (0x1002)
Device ID: 0x4e50
Revision ID: 0x0000
ROM Revision: 113-xxxxx-134
Displays:
Color LCD:
Display Type: LCD
Resolution: 1440 x 900
Depth: 32-bit Color
Built-In: Yes
Core Image: Not Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Not Supported
Display:
Status: No display connected
Is there a way to fix this? Please tell there's a way. I wanna see all those nice transition effects when using VirtueDesktops or Desktop Manager
Thanks!

Hi Leek Mibles;
May I welcome you to the Apple Discussion Forums.
The reason your system is telling you it can do Core Image is because it doesn't have the hardware to support it. Since your system is a PowerBook, you are unable to upgade the graphic card because it is soldered in. So I am sorry to say that the only way for you to get Core Image is to upgrade your whole system.
Allan

GeForce4 MX Quartz Extreme not supported

My Geforce4 is supposed to be supported by QE. I did a install of tiger over panther and now nothing works. I can not install final cut 3.0. i ran all if the software updates from apple.
my machine is a DP 867 G4. I tried to hit esc when the QE error msg pops up but that does not work. Is there a solution to this. I don't know what else to do!!

I experienced a similar grief, FCE 3.5 was working OK until I decided to lower some of the settings to see if my computer would work faster. When I tried to open FCE 3.5 the sign [ Graphic card does not meet the requirement of this software ] Finally I went into (About this Mac) >More info > Graphics/Display and saw Quartz Extreme: Not supported. I then went into System Preferences >Display and saw the setting: Colors was in Thousands. I changed it to Millions and Wallah!! every thing works as normal again.
Check your display and make sure the color is set to millions. I hope this helps.
Peace Love & Courage
Trevor

Quartz Extreme not supported on Port 2 of ATI x1900 xt

I'm having trouble with my system. For some reason, on my second monitor connected to port 2 comes up with Quartz Extreme not supported. I searched around, but haven't found any answers. Does anyone know why this is and if there is a way to fix it?
My system's Profile:
*Hardware Overview:*
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 3 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 6 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version: 1.7f10
*ATI Radeon X1900 XT:*
Chipset Model: ATY,RadeonX1900
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x7249
Revision ID: 0x0000
ROM Revision: 113-A52027-202
EFI Driver Version: 01.00.202
Displays:
DELL 2007WFP:
Resolution: 1680 x 1050 @ 60 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
DELL 2007WFP:
Resolution: 1680 x 1050 @ 60 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Mirror: Off
Online: Yes
Quartz Extreme: +*Not Supported*+
Rotation: Supported
I also have a AJA Kona LHe hooked up. Thanks.

Pretty much from what I see, there is a conflict with the AJA drivers because every time I uninstall the AJA drivers then check the system profiler, both displays show that Quartz Extreme is supported. But once I install any version of the AJA drivers for Final Cut Studio 2 (5.1, 5.1 NDD, and 6) it will disable the support for Quartz Extreme for one of my displays. So the only thing I can do is hope there is a 6.1 or something that will take care of that issue. I read the update news for 6, and there was no fix for what causes this problem. Otherwise it would have said it fixed the problem that required them to make a NDD version of the last driver. I emailed AJA the other night about this, but haven't heard back from them. I hope they have a good reply.

Radeon 9600 Pro - Quartz Extreme not supported? Help!

I've just got a Radeon 9600 Pro PC/Mac edition, as the 9600XT that came with the G5 died on me last week. It's taken an age to get it working, I could only boot in safe mode, in the end I deleted all my existing ATI extensions, installed the ATI Displays 4.5.7 and it works. BUT ... (and it's a big but)... performance is VERY slow and System Profiler says Core Image and Quartz Extreme are not supported. If anyone's got any ideas I'd be most grateful.
Thanks. Richard.
PowerMac G5 Dual 2.5GHz Mac OS X (10.4.10) 4.5MB RAM
Power Mac G5 Dual 2.5 GHz (Late 2004) Mac OS X (10.4.10) 4.5 GB RAM
G4 Cube

OK here's the latest. I did an Archive and Install (keeping my users home folders, though), and when the G5 restarted after the install it hung - the grey screen with apple appears, the little cog rotates under the apple, then that freezes and, although you can hear the hard drive working for a little while, it gets no further.
So I booted in safe mode, which works fine - ran the 10.4.10 combo updater, reset PRAM and NVRAM, same again - won't boot. Then I installed the ATI drivers from their website - same again. I can only boot in safe mode.
So i'm back where I was when I first installed the card - the only way I could boot other than in safe mode was to delete all the ATI extensions from /System, after that it booted but reported Quartz Extreme and Core Image not supported.
ATI support still haven't replied to phone calls and emails from Monday. So I' kind of at my wits end with this. Surely if I can boot in safe mode there can't be a hardware issue with the card, can there? Could there be something wrong with my AGP slot??
Any ideas gratefully received.
R
G4 Cube
PowerMac G5 Dual 2.5GHz Mac OS X (10.4.10) 4.5GB RAM

Mac Mini: Quartz Extreme not supported?

I have a Mac mini (late 2008) 2.0Ghz with an Intel GMA950. MB139LL/A -- It says Quartz Extreme is not supported. Is that right? This machine is new and shipped with Leopard. Do the Mac minis really not support Quartz Extreme?

I'm not sure which "Samsung SyncMaster 940" you have, but it looks like the technology in that monitor may be about 5 years old.
My guess is that monitors that have been released more recently will have better support.
Personally, I like to buy monitors from stores with good return policies, because you never know what you might not like about a monitor until you try it. Depending on where you live, Costco can be a good place to buy monitors, as they have probably the best return policy in the business. (90 days on TVs, but no time limit on monitors -- the last time I checked.)

Quartz Extreme not showing up on stock Mac Pro and card

I have purchased a new Mac Pro and LED Cinema Display from the Apple store last month. Safari Top Sites is not working and the "help" stated I need Quartz Extreme. Looked in the profile, but it is not listed in the list on the right at all. It is a stock apple card and display.
Is my monitor video card not even capable of using this feature or do I need to reinstall the system or something??
Model Name: Mac Pro
Model Identifier: MacPro4,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 3 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MP41.0081.B04
SMC Version (system): 1.39f5
SMC Version (processor tray): 1.39f5
Serial Number (system): H09257EM4PC
Serial Number (processor tray): J592300*MFD <edited by host>
Hardware UUID: 9F9AAE54-0436-5584-87F4-B99AF0523B22
NVIDIA GeForce GT 120:
Chipset Model: NVIDIA GeForce GT 120
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0640
Revision ID: 0x00a1
ROM Revision: 3386
Displays:
Display Connector:
Status: No Display Connected
LED Cinema Display:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off *<------------------------------ Quartz Extreme not even listed*
Online: Yes
Rotation: Supported
Connection Type: DisplayPort

With Snow Leo basically if you can't get quartz extreme you shouldn't be running 10.6.x
Easy way to tell if it is working though would be that your menu bar across the entire top of the screen is transparent, or if you add a widget to dashboard you will get the ripple effect. If you are on a system where Quartz Extreme is disabled you will not get those effects.

Pleasee help me ,,my id could not use after my account to update id

pleasee help me ,,my id could not use after my account to update id

Hello, beersaditya.
Thank you for visiting Apple Support Communities.
I would recommend reaching out to our Apple ID account security team to assist you with this issue.
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H.

Hot spot s not visible after latest iOS version update on my iPad please help

hey personal hot spot is not visible after iOS latest version update on my iPad mini please help

Hey Devinder from chd,
For most issues with Personal Hotspot, try out the basic troubleshooting in the article below. It does talk about iPhone but the troubleshooting is the same for your iPad. If you are still having issues, let me know and I can see what else we can do after that.
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/en-us/HT203302
Basic troubleshooting
See if your iOS device, computer, and wireless plan all meet the system requirements for Personal Hotspot.
Make sure Personal Hotspot is on: Tap Settings > Cellular > Personal Hotspot.
Check the Internet connection on your iOS device: Tap Safari and load a new webpage.
If one connection type doesn't work, try another. For example, instead of connecting using Wi-Fi, use USB or Bluetooth.
Turn Personal Hotspot off and on: Tap Settings > Personal Hotspot or Settings > Cellular > Personal Hotspot.
Install the latest version of iOS.
Reset your network settings: Tap Settings > General > Reset > Reset Network Settings.
If you still see the issue, restore the iPhone.
Take it easy,
-Norm G.

IPad 2 switched off and not charging after iOS 7.1 update

iPad 2 switched off and not charging after iOS 7.1 update. Pls help me. I have tested my charger. Its working in another device. But my iPad 2 is not charging with other adapters too. What to do??

Hello, 92.romil.
Thank you for visiting Apple Support Communities.
I would make sure you are using an Apple branded cable with your iPad. If you are, the troubleshooting steps in the article below may help. The steps listed below for the iPhone and iPod still apply to your iPad.
Resolving issues
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Cheers,
Jason H.

Ipod touch 5th gen will not sync after windows 8.1 update

ipod touch 5th gen will not sync after windows 8.1 update. Computer see's Itouch as mass storage and charges. Worked with Window's 8 fine, as soon as update was done and restarted computer Itouch doesn't show up. Itouch seen on two other computers.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

Illustrator tools dropdown is not working after the recent software update

My Illustrator tools dropdown is not working after the recent software update. Any help would much appreciate.

Same problem here. I have a Mac with a recent Yosemite update.

Home button not working after 5.0.1 update

Ok now the home button not working after 5.0.1 update. Anyone have any ideas? How do I roll backfrom this update?

This happened to me as well. AT&T had me reset my network settings and this fixed the problem. Here is how...
Settings > General > Reset > Reset Network Settings
"For now" the problem is fixed for me.

Mac Pro 1.1, OSX 10.6.8, ATI 1900XT, Quartz Extreme - Not working

I am about to sell my computer and I wanted to check and make sure everything is working as it should. I have a Mac Pro 1,1 2x Intel 2.66ghz Dual Core, running OSX 10.6.8, ATI Radeon 1900XT.
Everything was working fine a few weeks ago. Now when I try to open just about any program, I get an error that says "This system does not meet the following minimum requirements: ie Final Cut Pro requires that your system have a Quartz Extreme capable video card."
I have always been able to run FCP and all the programs that are giving me this error. I don't know exactly when I updated to OSX10.6.8, but I am almost certain I have been able to run FCP with OSX 10.6.8, I was running it about three weeks ago and the only thing that I know of that is different is that I updated photoshop.
I found this thread:
https://discussions.apple.com/message/12728219#12728219
Which suggests doing the Snow Leopard Graphics Update 1.0 found here:
http://support.apple.com/kb/DL1083
I tried running it, but it says it only works with 10.6.4. (I am on 10.6.8).
I also looked to see if Quartz is enabled in the system profiler, but it doesn't even show that option:
Does anyone know what could possibly be happening or causing this? Getting a new GPU is not really an option since I am selling the thing.

Welcome to Apple Support Communities.
If your computer meets the minimum requirements, you can purchase and download OS X 10.7 'Lion' from the Mac App Store online. It is also available on a flash drive at about double the price of the download.
http://www.apple.com/macosx/
Specs, minimum hardware requirements, and upgrade paths for OS X 10.7 'Lion' are also listed here:
http://www.apple.com/macosx/specs.html
Even though Lion runs in 2GB system RAM, 4GB or more is highly recommended.
Also be aware that Apple recently announced the next version of OS X, 10.8, called 'Mountain Lion', but no firm date for availability, other than 'coming this summer.'
http://www.apple.com/macosx/mountain-lion/

Quartz Extreme not supported after 10.4.7 update

Similar Messages

Maybe you are looking for