Quartz Extreme Support

Can anyone explain this error code to me? "This software requires certain hardware or software which is missing." I got that after installing FCP 5.1 and doing a software update.
Help

On one of my Dual G5s, after I did an upgrade with my crossgrade Final Cut Studio Disks and a Software update, I finished editing a project I was working on. I then Shut the system down for about two hours. When I tried to launch FCP, I got the error "This software requires certain hardware or software which is missing." Under that phrase were the words "Quartz Extreme Support" and the quit button.

Similar Messages

FCP Won't Load After Quartz Extreme Support Dissapears, then reappears

I did the latest Software Update yesterday and weirdly, the Quartz Extreme support on my video card (NVidia GForce FX 5200) disappeared. Then it reappeared after doing nothing. Should I download a new driver? And if so, where do I get it? Without QE, FCP or and FCS 2 software will not load. There was no place on the Tiger pages to post this question. Thanks.

Two things: VST's don't work with Logic anyway, and they won't work in any program if you put them in the components folder. The Components folder is for AU plugins (that work with Logic) and the VST folder is for, well, you can guess...
But your real problem is Rewire. You must either update it to a compatible version, or remove the folder Propellerheads from *Library>Application Support*.

Quartz Extreme Support on Mini

Does the Mac Mini (Late 2009) support Quartz Extreme that is needed for iMovie? I have my mini connected to my LCD TV via HDMI and I keep getting this error when I fire up iMovie.

That is a particularly fine winter gift- congrats on that! Try hooking up the mini to that and let us know what happens.
You can verify if the display is Quartz Extreme Compatable by clicking on About this mac, and then looking under the displays setting. For example, my current TV is a Sony Bravia from about 2 years ago, and with my mini connected to it, Quartz Extreme shows as Enabled in my mac settings
good luck-

Trashed my prefs and now have Quartz extreme support missing

Idiotic me trashed my prefs and didn't open FCP before emptying the trash and now get the Quartz Extreme missing message. Do I have to re-install Final Cut Studio or can I download the missing software from Apple or ?? What's the best method?
thanks

Happy you solved the problem!
Next time you can use FCP Rescue to delete and backup your preferences. You can restore them if you need that way.
Alberto

Help! Where is Quartz Extreme support on my MBP 17"?

Hi,
Just recently upgraded 10.5.8 to 10.6 and than updated over the internet to 10.6.1 The upgrading/updating process was smooth and fast lake a charm. Only one thing I noticed there is no more transparent menu bar in the system. I checked the box in the pref-desktop - doesn't help. Rebooted few times. Nothing. Even profile says that I don't have Quartz Extreme any more.
I had it before and it was working fine. What happened with my video card?
Please Help.
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.5 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP41.00C1.B03
SMC Version (system): 1.28f2
Serial Number (system): W8843**3R8<Edited by Host>
Hardware UUID: CBB215BF-5C60-5AEC-9572-C7A79929BE1C
Sudden Motion Sensor:
State: Enabled
NVIDIA GeForce 8600M GT:
Chipset Model: GeForce 8600M GT
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0407
Revision ID: 0x00a1
ROM Revision: 3212
Displays:
Color LCD:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Display Connector:
Status: No Display Connected

Google search is an amazing tool. A quick one for *quartz extreme snow leopard* brought up many hits, including this top one: http://prasys.co.cc/2009/09/quartz-extreme-and-core-image-in-snow-leopard/

Suddenly Quartz Extreme Not Supported

Just got my new 20" iMac G5. was enjoying the RSS and iTunes artwork screensavers only this morning and now after migrating from my G5 1.6 they're gone and system profiler now says Quartz Extreme Not Supported. Zapped Pram all software updated and done a couple of re-starts.
Can't think what I've done (or not) to screw up this feature
Any help welcome
G,

Ok update.... I followed directions here http://www.macfixit.com/article.php?story=20081110225534811 and Quartz Extreme is supported on both now, but i'm still getting the ugly scan line.
Profiler now reads
*Chipset Model: ATI,RadeonHD2600*
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x9583
Revision ID: 0x0000
ROM Revision: 113-B2250F-212
EFI Driver Version: 01.00.212
Displays:
iMac:
Resolution: 1920 x 1200
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Mirror: On
Mirror Status: Hardware Mirror
Online: Yes
Quartz Extreme: Supported
Built-In: Yes
2619:
Resolution: 1920 x 1200 @ 60 Hz
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: On
Mirror Status: Master Mirror
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Television: Yes
Something to do with Master Mirror/Hardware Mirror??

Quartz Extreme not supported on Port 2 of ATI x1900 xt

I'm having trouble with my system. For some reason, on my second monitor connected to port 2 comes up with Quartz Extreme not supported. I searched around, but haven't found any answers. Does anyone know why this is and if there is a way to fix it?
My system's Profile:
*Hardware Overview:*
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 3 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 6 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version: 1.7f10
*ATI Radeon X1900 XT:*
Chipset Model: ATY,RadeonX1900
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x7249
Revision ID: 0x0000
ROM Revision: 113-A52027-202
EFI Driver Version: 01.00.202
Displays:
DELL 2007WFP:
Resolution: 1680 x 1050 @ 60 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
DELL 2007WFP:
Resolution: 1680 x 1050 @ 60 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Mirror: Off
Online: Yes
Quartz Extreme: +*Not Supported*+
Rotation: Supported
I also have a AJA Kona LHe hooked up. Thanks.

Pretty much from what I see, there is a conflict with the AJA drivers because every time I uninstall the AJA drivers then check the system profiler, both displays show that Quartz Extreme is supported. But once I install any version of the AJA drivers for Final Cut Studio 2 (5.1, 5.1 NDD, and 6) it will disable the support for Quartz Extreme for one of my displays. So the only thing I can do is hope there is a 6.1 or something that will take care of that issue. I read the update news for 6, and there was no fix for what causes this problem. Otherwise it would have said it fixed the problem that required them to make a NDD version of the last driver. I emailed AJA the other night about this, but haven't heard back from them. I hope they have a good reply.

But I DO have Quartz Extreme

I upgraded to 06 because of the new features in iMoive and iPhoto. No where on the package did it state that Quartz Extreme was required. So after attempting a couple of times to apply a theme I looked into it and discovered the requirement.
Then I checked my system. I have 2 cards, 1 has QE and one does not. I read that even if you have one that does, the one that does not will keep themes from working. So I removed the one that did not...and...still no worky.
Here's what it says under Graphics/Displays in Profiler
<pre>
ATI Radeon 9000 Pro:
Chipset Model: ATY,RV250
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 64 MB
Vendor: ATI (0x1002)
Device ID: 0x4966
Revision ID: 0x0001
ROM Revision: 113-99702-130
Displays:
R911E:
Resolution: 1280 x 1024 @ 75 Hz
Depth: 32-bit Color
Core Image: Not Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display:
Status: No display connected
</pre>
Did you get that last line? "No display connected?" Then how they hey am I seeing what's on screen?
OK, I really don't care if it thinks one is connected or not, I just want this to work!
Dual 1.25GHz G4 Mac OS X (10.4.7) 1.5Gb RAM
Dual 1.25GHz G4 Mac OS X (10.4.7)

KajuRob,
The ATI 9000 Pro can support two displays.
At the moment, it appears you only have a Rosewill 9111E display attached.
You graphics card does not support Core Image and I think that may be part of your problem with themes as they leverage that technology.
Matt

MXO & Quartz Extreme

Hi Folks,
Wonder if anyone can help with this.
Below is my GPU detail from system info showing no Quartz Extreme support through the MXO (attached to DVI port 2). I found this link:
http://www.blackmagic-design.com/support/detail.asp?techID=184
from back in '07 seemingly demonstrating a problem with port 2 -no GPU mentioned-& Quartz Extreme. My Mac will not open iMovie as it says no QE support, I'm guessing it's detecting the unsupported MXO & saying 'no way baby'. It can't be a common problem with all GPUs can it?
I have not as yet switched the monitors around to test, (nest of vipers cable-wise), but have searched about to no avail so far in Forum land.
Is there a workaround or command line insert to get around this?
Cheers,
Nick
NVIDIA GeForce 8800 GT:
Chipset Model: NVIDIA GeForce 8800 GT
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0602
Revision ID: 0x00a2
ROM Revision: 3233
Displays:
Cinema:
Resolution: 1680 x 1050
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Matrox MXO:
Resolution: 1680 x 1050 @ 60 Hz
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Mirror: Off
Online: Yes
*Quartz Extreme: Not Supported*
Rotation: Supported

Hi fellow Nick.
I saw another thread that suggested re-applying the 10.5.7 *Combo Updater*.
Here:http://discussions.apple.com/thread.jspa?messageID=9524601&#9524601
No idea if it worked -the OP never replied. 10.5.8 is out now anyway, so the 10.5.7 updater might be no longer available.

10.4.4 broke Quartz Extreme

Hopefully an easy question for somebody here:
I installed the full suite of new Software Update fixes last night (10.4.4, Quicktime, iTunes, etc.) and it appeared to run and restart without a hitch. However, an hour later when I launched Soundtrack Pro 1.02 -- my most important app -- it failed with the following error:
Configuration Error:
This software requires certain hardware or software which is missing.
* Quartz Extreme Support.
It ran fine earlier in the day, before the update. At first I thought this was a Soundtrack Pro problem, but a few other signs on my Mini indicate that maybe there is a problem with Quartz Extreme now. E.g., the Electric Sheep screensaver is slow and jerky, where previously it was smooth.
Can anyone give me some guidance on where to look to see if any configuration settings might be broken, or how to reset them? Thanks in advance.
Mac Mini Mac OS X (10.4.4)

I appear to be in the same boat as you. My MDD has a Radeon 9000 Pro which has been Quartz Extreme capable since the day I purchased the machine.
After the 10.4.4 update I can no longer launch DVD Player (it says "A valid video device could not be found for playback. [-70017]"), Exposé is choppy, and video files in Quicktime Player take tons of CPU usage and yet play choppy.
System Profiler now says that Quartz Extreme is "Not Supported". What happened?

Quartz Extreme Missing?

Hello,
I recently tried to run my copy of Final Cut Express 3.5 but it said I am missing the Quartz Extreme Support. I'm using a MacBook. I read on the minimum requirements that Final Cut Express will work with MacBooks, and my copy of Final Cut Express worked fine when my MacBook ran Tiger. I recently upgraded to Leopard and now it doesn't work anymore.
Anyone have any solutions?

I'm having the same problem. When I tried to open FCE yesterday, I got the error warning:
• Final Cut Express requires that your system have a Quartz Extreme capable video card.
I'm using FCE4 on a MacBook Pro and nothing has changed on my computer since I last used FCE on Thursday.
Wasn't there a FCE software update a week or so ago? Should I go back in the Time Machine to before that update? I tried the simple solution listed below, but my system was already set for millions of colors.

Final Cut - Missing AGP graphics card in my MacBook which is Quartz Extreme

Successful Install of Leopard.
I have Final Cut Express HD 3.0, my MacBook is supposedly Quartz Extreme Supported (System Profiler agrees with that). On attempted start of Final Cut, I get the following error message.
"Configuration Error
This software requires certain hardware of software which is missing.
• AGP graphics card"
Any ideas or did I find a true Apple Bug with their own hardware and software?
LeRoy

No PCI Cards installed in a MacBook.
No updates to Final Cut Express HD 3.0 for this model. There is only one update to 3.0.1 and that is for specific machines.
Yes Final Cut Express HD 3.0 did work for 10.4.10 and was installed when I got MacBook by Apple.
FYI -- Graphics Display from System Profiler.
Intel GMA 950:
Chipset Model: GMA 950
Type: Display
Bus: Built-In
VRAM (Total): 64 MB of shared system memory
Vendor: Intel (0x8086)
Device ID: 0x27a2
Revision ID: 0x0003
Displays:
Color LCD:
Display Type: LCD
Resolution: 1280 x 800
Depth: 32-bit Color
Built-In: Yes
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display Connector:
Status: No display connected
FYI -- PCI Cards from System Profiler.
This computer does not appear to have any PCI cards installed.

Quartz extreme problem prevents installation

When i try to install final cut express hd it tells me i need a quartz extreme supported card.
i did the reseach and according to apple the card that is in my computer supportds QE.
i have a dual 867 g4 with a NVIDIA GeForce4 MX card.
i am running 10.4.6
i dont want to spend money on another card, i need to save for a HD camera.
Can anyone tell me whats going on..
is this a 10.4.6 problem, i never knew QE existed until i got final cut exp hd.
thanks
dual 867 g4 Mac OS X (10.4.6)

That's not the version number. The name of the application is Final Cut Express HD. It's been that since 3. There's 3.0.1 and 3.5. Which of these three versions is it? It should say in the documentation that came with the application. If you have an installation issue you should contact Apple. They give tech support for installation.

Mac Mini: Quartz Extreme not supported?

I have a Mac mini (late 2008) 2.0Ghz with an Intel GMA950. MB139LL/A -- It says Quartz Extreme is not supported. Is that right? This machine is new and shipped with Leopard. Do the Mac minis really not support Quartz Extreme?

I'm not sure which "Samsung SyncMaster 940" you have, but it looks like the technology in that monitor may be about 5 years old.
My guess is that monitors that have been released more recently will have better support.
Personally, I like to buy monitors from stores with good return policies, because you never know what you might not like about a monitor until you try it. Depending on where you live, Costco can be a good place to buy monitors, as they have probably the best return policy in the business. (90 days on TVs, but no time limit on monitors -- the last time I checked.)

Core Image: Not Supported??? Quartz Extreme: Not Supported???

Hello! I'm new to this forum and I'm a Mac noob. I have a problem. For some reason my computer is saying Core Image and Quartz Extreme are not supported.
ATI Mobility Radeon 9700:
Chipset Model: ATY,RV360M11
Type: Display
Bus: AGP
VRAM (Total): 64 MB
Vendor: ATI (0x1002)
Device ID: 0x4e50
Revision ID: 0x0000
ROM Revision: 113-xxxxx-134
Displays:
Color LCD:
Display Type: LCD
Resolution: 1440 x 900
Depth: 32-bit Color
Built-In: Yes
Core Image: Not Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Not Supported
Display:
Status: No display connected
Is there a way to fix this? Please tell there's a way. I wanna see all those nice transition effects when using VirtueDesktops or Desktop Manager
Thanks!

Hi Leek Mibles;
May I welcome you to the Apple Discussion Forums.
The reason your system is telling you it can do Core Image is because it doesn't have the hardware to support it. Since your system is a PowerBook, you are unable to upgade the graphic card because it is soldered in. So I am sorry to say that the only way for you to get Core Image is to upgrade your whole system.
Allan

Quartz Extreme Support

Similar Messages

Maybe you are looking for