Quartz Screensaver with Video - synchronous not fluent, asynchronous crashes

hey, I'm building a simple screensaver with video in Quartz Composer. Basically it's a Movie Importer patch connected to a Billboard. The movie is MPEG-4 encoded. When I set the patch to 'synchronous' mode, I get very low FPS (drops down to 2!!) - the movie doesn't play fluent at all. Changing the video patch to asynchronous mode seem to do the trick - Test & Preview mode work perfect. But now the problem is, that the actual Screensaver keeps crashing asap the video starts... :( Any idea how to get fluent output in synchronous mode or to ensure asynchronous mode keeps the screensaver running?? Cheers!

Hi I had the same problem and same response. The answer for me was, go to system preferences click on sharing, and un-tick internet sharing, and then it worked fine. but I do use internet sharing for my Iphone so then I re-tick the internet sharing. As it happens I wanted to join a three way conference last night and it wasn't happening, then I remembered to switch off internet sharing and bingo it was working again, I hope this helps. Viv
PS if you want to try it out you can give me a call

Similar Messages

ITunes with videos bad, Music & Regular! Crash, Black Screen, Tagging?

So i have been using iTunes for ages and have been collection Music's CD's longer and i got to load them to iTunes a while ago. Music works great in iTunes but with my CD's i often got music video's included so i tried to play them and some regular videos in iTunes and got the following problems and issues (Almost all the tested video files was optimised for iProducts (All MP4 format)) :
Can't use some of my music videos (mp4 format) in itunes but i can in Quicktime (Got black screen but good sound ). I have no idea how they coded iTunes but shouldn't they use the same codec's?.
iTunes have a tendency to crash if i play music videos in a row. (Like to use random in a music video list, calming in the background. i know it's kind of excessive but i like it).
Sometimes i need to play through a music video then reverse back to it to get a picture. (Sound works great tho) .
Laggy! Sometimes the sound get out of sync with video and vice versa. (Usually the beginning. Has a tendency to catch up but not always, sometimes a middle lane in the video freezes.)
Can't you tag or sort video files better.? My computer sometimes crashes or get changed so i need to reinstall my media library from a backup. It would immensely help if i could ID3 tag media files the same way i can song so they automatically sort in to music video's, movies and Tv-series (media types!) without forcing me too change it in the advance tap at show more information. (This is off topic but i need this for audiobooks too (iTunes don't got my type of books so i am manually coping them from CD to MP3 format and transferring them to my iPhone))
So i'm a trial and error person so i worked a little bit with the problems when i had the time and when finally got somewhere and had some real questions so i created this profile and wrote this post.
Please read the whole post before you go yelling: -Look at this!, Already Asked!, See this forum! It's your computer! I usually get to the point somewhere on this post. At the bottom of the post i have my current specs for my computer. So here comes the wall of text:
I started with this http://support.apple.com/kb/TS1718?viewlocale=en_US and http://support.apple.com/kb/TS1717 which is what you get if you search a bit in apple's support site. Tried all the things there. Disabled Direct3D, Tried Safe Mode On (Note: These two made the performance worse not better.), Checked display colour quality (Maxed), Turned on DMA, (A slight improvement still issues.) and finally got to ReadyBoost. I have all my media on an external drive (Aha you says!) and yes i finally figured out that iTunes can't handle files of that size from a regular external (Observe i do not have ReadyBoost on my 1T drive, It says it don't have the necessary performance). So i moved my video files to my internal drive and it significantly improved in problems 2,3,4 (Not gone!), Also noticed that i need to have as short pathway as possible (smaller improvements yet again!) (None of this shows in troubleshooting, Apple needs to read my post i think.)
I am now browsing web forums for a better suggestions on the problems and found that Apple either did not care about the problems or the members of this or other forums recommended other media player's to use for handling devices and media (MediaMonkey, doubleTwist and so on). Either as to further their own agenda or that they have giving up on iTunes as a media player for large number of media files. (Found a good media tagger, Magic MP3 Tagger, which worked wonders on some of my older albums with no or little information). So back to my problems or questions.
What can be the trouble with a mp4 format?
Tendency to crash, is iTunes really that unstable?
Play through music video to see picture. Really iTunes?
Laggy! don't know what more to say or fix. (iTunes take to long to buffer (got between 0-15 seconds delay after i come this far, better then before but not great)
Sort video files better. (Tags). The only format i know to date that instantly recognise what media type it is, some movie format and the ringtone format m3u (Useful to know is that you can make your own ringtones by creating a ACC with a limited play time in advanced tab (max 30 seconds) then change the last file ending of the ACC file now created to m3u. Viola! (Don’t forget to change back to the regular playtime on the original file) your custom created ring/smstone in workable and high quality, but i digress).
Sorry for the long read but i wanted to be as thorough as possible and please forgive any grammar and spelling problems. English is not my native tongue and the spelling checker did not work in my laptop (browser) on this website
Currently using (The one with iTunes and the external hard drive) (But have had two different computers before with same problem, 1 PC & 1 Mac):
Screen
SyncMaster T240
Videocard
ATI Radeon HD 4870 (512Mb)
PC
ACPI x86
Motherboard
ASUSTeK Computer INC (P5G-PRO)
Memory
Type DDR2 Dual
Size 4096 MB
External Harddrive
WD Ext HDD 1021 USB Device
IDE ATA/ATAPI
Standard-Dual Channel PCI IDE
Standard-Dual Channel PCI IDE
Soundcard
TerraTec Aureon 5.1 PCI
AMD High Definition Audio Device
Processor
Intel(R) Core(TM) 2 Quad CPU Q8200 @ 2,33GHZ

This problem cropped up for me yesterday. I had just copied a new video to my iTunes library and was testing that it worked properly, but while the sound was playing, the screen was black.
Pausing/pressing the Play button resolves the issue, until I select a new video/movie to play, when I have to do it again.
I'm running MacOS X 10.6.6 and iTunes 10.1.1 (4). I tried reinstalling iTunes, with no luck. I also tried the old mainstay of replacing the Preferences file, but that also didn't help.
There is ONE new wrinkle to this situation. Yesterday, I had installed a new app named AirView to stream videos over AirPlay to my iPad. This works fine, but after this, the issue cropped up, suggesting an AirPlay issue.
I have two iMacs, so decided to try this situation on the Kitchen iMac and played a video on this other iMac just fine, video and sound. I then started up AirView on the iPad and initiated the video stream to the iPad from the Kitchen iMac. The movie played fine on the iPad. I quit AirView and went back to try the video on the Kitchen iMac, and yes, the video now failed to display until I reselected Computer from the AirPlay menu at the bottom of the screen, or used the pause/play solution, even though Computer was still selected as the default in the AirPlay menu. Doing this once seemed to be enough to resolve the issue for playing all videos on the Kitchen iMac, but not on the Office iMac.
The only other difference between iTunes on these two iMacs is that one (the Office iMac) is running its videos from a FireWire 800 attached 2TB hard drive, while the Kitchen iMac's contents are on the internal hard drive.
Deselecting the AirPlay option in Preferences/Devices to start videos correctly on the Office iMac is not a solution, since this iMac serves as our home server for our Apple TV.
Since I have a practical option, however, and since this issue doesn't affect playing videos remotely using AirPlay, this is now a buggy annoyance, but no longer a problem for me.

IPhoto Events with video only not showing in Photos.app with iOS 4.2.1

I upgraded to iOS 4.2.1 on iPhone 3GS and when I open the Photos.app the videos and the event with the videos in do not show. I have created a new video on the iphone, synched ok with IPhoto but re-sycnhing with iPhone again does not show videos in Photos.app
Has anyone found a fix for this bug?

The same thing happened to me. I was on a mission yesterday to fix it, but didn't get it to work. I have 1 more thing i want to try... but haven't had a chance.
Has anyone fixed this?
My plan is to unsync photos to remove them from my phone, delete all the photo cache information from the iPhoto Library package, empty the trash, reboot my computer AND iPhone, open iPhoto to make sure they're sorted correctly, and then sync my phone. If that doesn't fix it... i dont know, i might call Apple.

Black Ipod With Video is not recognized

I searched the forums alot before posting.
I was wondering whats up with my Ipod cuz my computer gives me the device failed to connect sound but no error message. The Ipod lights up when pluged into my comp but is not connected. It works on other computers though...Whats the deal?

First of all, let's try working through these basic troubleshooting steps:
The Five R's
Then, if you've tried those things and they don't seem to cure anything for you, have you tried looking through the steps here?
iPod diesn't appear in My Computer or in iTunes
-Kylene

Navigating off of a page with video causes digital magazine to crash

In testing the digital magazine I created I found that if I don’t allow a video to play through all the way and click a button to navigate to another article while it’s playing it will crash the magazine and the user will have to start over. Has anyone run into anything like this? Total videos for the article (separate pages for each) total around 105 MB.
Any help is appreciated.
~Todd

If you shift the top black layer even slightly it clicks and turns off in an instant. I noticed that it's in the right direction that it usually does this.

How do you sync sound from a digital recorder with video?

Can anyone tell me how to sync sound with video? Not a voice over but Voice recorded when video was shot. Voice was recorded on hand held digital recorder.

When you're shooting use the ciak , then when in imovie, sync the sound of ciak with the closing of it and you're done
If u havent's used , just seek for a sound or a part of speech witch is very evident to sing
Do it before cut video
hope helps
J

Streaming over WiFi is not fluent

When I stream video from my mac or iPad over wifi, video is not fluent, it is stucking. When I stream it from my mac over ethernet (apple tv is connected to my network by ethernet), it works just fine.
These problems started after updating my Apple TV few months ago.
Any idea? :/

Hmm, I am trying to insert picture but it does not react at all..
So I used my dropbox
https://www.dropbox.com/s/bsxn4lb95qxj031/Sn%C3%ADmek%20obrazovky%202014-12-05%2 0v%C2%A011.23.22.png?dl=0
https://www.dropbox.com/s/0oibbrgiy1hf2kb/Sn%C3%ADmek%20obrazovky%202014-12-05%2 0v%C2%A011.23.09.png?dl=0

Marrying Audio with Video

Question: How do I marry audio from Garageband with video and not have a drift?
I am capturing audio on a mic (Blue Snowball) with Garageband.
I am capturing matching video with a Logitech QuickCam Pro 3000 on a PC. I click record on my PC, then I turn around and click record on my Mac. Two separate systems going.
I have a feeling I'm trying to make a silk purse out of a sows ear using the web cam. I'm trying to work with what I have and the web cam is easy to place around the piano.
The Logitech QuickCam program makes .avi files. There are a number of compression options and the only one that I've found that works is the Divx codec. In any case, videos are still saved with the .avi extension.
After I send the .avi file to my Mac I open Quicktime, and then I export the video as a .mov file. This is the only way I can import the video into iMovie.
I don't have this issue if I take Garageband out of the situation, hooking the mic up to the PC where video and audio are recorded together. BUT Garageband utilizes the capabilities of the mic better.
File info for my .avi files show frame rate as "30 frames/second"
I would really like the audio I capture in Garageband to sync with the matching video. Can this be done?

Some things I forgot to mention...
To clarify, I'm importing the .mov file into iMovie '09. Then I'm dropping the .m4a file from Garageband in. I sync up the sound with the picture so that it looks and sounds right at the start of the action but before a minute is up there is noticeable drift.

Help with EJB Arch: Synchronous front-end -- Asynchronous back-end

Hi folks, We are developing an application with the following characteristics: - users can invoke requests on our appl and they will expect a quick response - to obtain the information requested by the user, our application talks with Tibco using RV. This communication follows a pub/sub messaging paradigm and is asynchronous. - thus, we have a synchronous req/resp front-end and an asynch back-end.
We would like some advice as to the best way of architecting this application. Here is our approach. Please critic and suggest alternatives.
1. Consider an user who has requested something from our app. 2. The user will be using a JSP based front-end. (S)he submits the request on a form and a servlet is driven. 3. The servlet uses a session EJB and invokes one of its methods, which handles some business-specific logic. 4. The method in the session EJB then instantiates a helper class. 5. A method on our helper class is now driven. This method sends a message to Tibco and it provides a callback method in the helper class. 6. The method in the helper class blocks the thread - basically, it waits. 7. Meanwhile, Tibco does the processing and invokes the callback method (in the helper class) with the result. 8. In the callback method, the data sent by Tibco is stored in member variables of the helper class. 9. The callback method wakes up the blocking thread. 10. The method in step 6 wakes up and returns the information to the session EJB. 11. The session EJB returns the information to the invoking servlet. 12. The servlet provides the information back to the user.
The version of Tibco-RV that we are using is not JMS compliant.
We keep hearing that threads should be handled very carefully in an EJB container environment, so we would like to know if the way we are handling the thread in the helper class is okay. Could we remove the helper class and do the same thread-handling in the session EJB itself?
Can we use JMS in this solution even though our Tibco-RV does not support JMS?
Tools: Weblogic App Server 6.1, JBuilder 5.0.
Thanks for your advice and suggestions!

Let me start off by mentioning that Sonic MQ (an excellent JMS server) now provides a bridge for TIB/Rendezous. I am also wrestling with a simliar issue, something that requires threading at the servlet or ejb level, and have given some thought to using JMS. My concern was that JMS is an asynchronous process so it's model does not fit well with the synchronous front end. Technically I can see a few ways to implement it but architecturally I am not convinced that they are sound. You could send a message from the session bean to the TIB via SonicMQ and have a JMS message bean registered as a listener for messages from the TIB, again via SonicMQ. The JMS bean could update a static class or singleton which your session checks but you still have the issue of making the session bean wait on that event.
I'll do a bit more digging and see if there's a design pattern available for this situation.
-Dat

Assuming video is not compatible with compiz-fusion...?

I'm installing ArchLinux on a extra computer at work... works great... but for the fun of it I tried running compiz fusion on it. I get this:
[root@myhost ~]# fusion-icon
* Detected Session: kde
* Searching for installed applications...
* Using the GTK Interface
(fusion-icon:7540): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
* KWin is already running
* Setting window manager to Compiz
... executing: compiz --replace --sm-disable --ignore-desktop-hints ccp
compiz (core) - Fatal: No GLXFBConfig for default depth, this isn't going to work.
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
* Setting window manager to KWin
I'm just using an xorg.conf that was generated with #X -configure, and have also tried one generated with hwd -x. Both detect "sis" as the video driver. Listing below...
Am I right to assume that this means that the video in not compatible with compiz? Or could it be some settings that need to be tweaked.
Thanks for any advice.
Rick
xorg.conf.sis generated with "#hwd -x"
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "sis"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
xorg.conf generated with "#X -configure"
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "record"
Load "dri"
Load "dbe"
Load "xtrap"
Load "GLcore"
Load "glx"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 270 200 # mm
Identifier "Monitor0"
VendorName "SAM"
ModelName "1033"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 30.0 - 55.0
VertRefresh 50.0 - 120.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "Accel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "TurboQueue" # [<bool>]
#Option "FastVram" # [<bool>]
#Option "HostBus" # [<bool>]
#Option "RenderAcceleration" # [<bool>]
#Option "ForceCRT1Type" # <str>
#Option "ForceCRT2Type" # <str>
#Option "ShadowFB" # [<bool>]
#Option "DRI" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "Vesa" # [<bool>]
#Option "MaxXFBMem" # 
#Option "EnableSiSCtrl" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "HWCursor" # [<bool>]
#Option "UseColorHWCursor" # [<bool>]
#Option "Rotate" # <str>
#Option "Reflect" # <str>
#Option "Xvideo" # [<bool>]
#Option "InternalModes" # [<bool>]
#Option "OverruleFrequencyRanges" # [<bool>]
#Option "RestoreBySetMode" # [<bool>]
#Option "ForceCRT1" # [<bool>]
#Option "XvOnCRT2" # [<bool>]
#Option "PanelDelayCompensation" # 
#Option "PDC" # 
#Option "PanelDelayCompensation2" # 
#Option "PDC2" # 
#Option "PanelDelayCompensation1" # 
#Option "PDC1" # 
#Option "EMI" # 
#Option "LVDSHL" # 
#Option "ForcePanelRGB" # 
#Option "SpecialTiming" # <str>
#Option "TVStandard" # <str>
#Option "UseROMData" # [<bool>]
#Option "UseOEMData" # [<bool>]
#Option "YV12" # [<bool>]
#Option "CHTVType" # [<bool>]
#Option "CHTVOverscan" # [<bool>]
#Option "CHTVSuperOverscan" # [<bool>]
#Option "CHTVLumaBandwidthCVBS" # 
#Option "CHTVLumaBandwidthSVIDEO" # 
#Option "CHTVLumaFlickerFilter" # 
#Option "CHTVChromaBandwidth" # 
#Option "CHTVChromaFlickerFilter" # 
#Option "CHTVCVBSColor" # [<bool>]
#Option "CHTVTextEnhance" # 
#Option "CHTVContrast" # 
#Option "SISTVEdgeEnhance" # 
#Option "SISTVAntiFlicker" # <str>
#Option "SISTVSaturation" # 
#Option "SISTVCFilter" # [<bool>]
#Option "SISTVYFilter" # 
#Option "SISTVColorCalibFine" # 
#Option "SISTVColorCalibCoarse" # 
#Option "SISTVXScale" # 
#Option "SISTVYScale" # 
#Option "TVXPosOffset" # 
#Option "TVYPosOffset" # 
#Option "SIS6326TVAntiFlicker" # <str>
#Option "SIS6326TVEnableYFilter" # [<bool>]
#Option "SIS6326TVYFilterStrong" # [<bool>]
#Option "SIS6326TVForcePlug" # <str>
#Option "SIS6326FSCAdjust" # 
#Option "YPbPrAspectRatio" # <str>
#Option "TVBlueWorkAround" # [<bool>]
#Option "ColorHWCursorBlending" # [<bool>]
#Option "ColorHWCursorBlendThreshold" # 
#Option "CRT2Detection" # [<bool>]
#Option "ForceCRT2ReDetection" # [<bool>]
#Option "SenseYPbPr" # [<bool>]
#Option "CRT1Gamma" # [<bool>]
#Option "CRT2Gamma" # [<str>]
#Option "GammaBrightness" # <str>
#Option "GammaBrightnessCRT2" # <str>
#Option "CRT2GammaBrightness" # <str>
#Option "Brightness" # <str>
#Option "NewGammaBrightness" # <str>
#Option "CRT2Brightness" # <str>
#Option "CRT2NewGammaBrightness" # <str>
#Option "Contrast" # <str>
#Option "NewGammaContrast" # <str>
#Option "CRT2Contrast" # <str>
#Option "CRT2NewGammaContrast" # <str>
#Option "CRT1Saturation" # 
#Option "XvGamma" # [<str>]
#Option "XvDefaultContrast" # 
#Option "XvDefaultBrightness" # 
#Option "XvDefaultHue" # 
#Option "XvDefaultSaturation" # 
#Option "XvDefaultDisableGfx" # [<bool>]
#Option "XvDefaultDisableGfxLR" # [<bool>]
#Option "XvChromaMin" # 
#Option "XvChromaMax" # 
#Option "XvUseChromaKey" # [<bool>]
#Option "XvInsideChromaKey" # [<bool>]
#Option "XvYUVChromaKey" # [<bool>]
#Option "XvDisableColorKey" # [<bool>]
#Option "XvUseMemcpy" # [<bool>]
#Option "BenchmarkMemcpy" # [<bool>]
#Option "UseSSE" # [<bool>]
#Option "XvDefaultAdaptor" # <str>
#Option "ScaleLCD" # [<bool>]
#Option "CenterLCD" # [<bool>]
#Option "EnableHotkey" # [<bool>]
#Option "ForceCRT1VGAAspect" # <str>
#Option "ForceCRT2VGAAspect" # <str>
#Option "MergedFB" # [<str>]
#Option "TwinView" # [<str>]
#Option "MergedFBAuto" # [<bool>]
#Option "CRT2HSync" # <str>
#Option "SecondMonitorHorizSync" # <str>
#Option "CRT2VRefresh" # <str>
#Option "SecondMonitorVertRefresh" # <str>
#Option "CRT2Position" # <str>
#Option "TwinViewOrientation" # <str>
#Option "MetaModes" # <str>
#Option "MergedDPI" # <str>
#Option "MergedXinerama" # [<bool>]
#Option "TwinviewXineramaInfo" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
#Option "MergedNonRectangular" # [<bool>]
#Option "MergedMouseRestriction" # [<bool>]
Identifier "Card0"
Driver "sis"
VendorName "Silicon Integrated Systems [SiS]"
BoardName "65x/M650/740 PCI/AGP VGA Display Adapter"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

lateralus wrote:
stingray wrote:
Misfit138 wrote:IIRC, the SiS driver is quite limited, and only offers 2d.
Thats what I expected to hear...
Are you 100% sure? I just run glxinfo and it says:
direct rendering: Yes
And I'm confused. Are there any chances of getting compositing to work on SiS card in this case?
I'm not the expert here, but compiz can work with indirect rendering, so I don't think that's the qualifier for if it works for your system.

In OSX 10.8.2 with Safari 6.0.2. Many videos will not open in Safari

I am running OSX 10.8.2 with Safari 6.0.2. Many videos will not open on Safari but open on Chrome. I have enabled javascript in Safari Preferences. I get a javascript void message when copying the link of the non-working videos. In one discussion about javascript problems in Mountain Lion a Java Preferences Ap in Utilities was used to fix the problem. I do not have a Java Preferences Ap in Applications\Utilities. I am stuck.

I am having a similar issue, except mine is with a military site. The military sites use java althroughout for downloading files/image. The problem is that it never gives me the notice to enable java for these sites.
I would like to have the ability to manually tell safari to allow java on a particular site so this isn't an issue.
This would solve my issue and allow a way to activate java on sites that don't give you the option to allow it.

I have a HP-6210 Laptop with Windows 8.1 ... and Videos are not playing from youtube espn etc

I have a HP-AMD A4-6210 Laptop with Windows 8.1 ... and Videos are not playing from youtube espn etc
This question was solved.
View Solution.

Hi,
Try a clean installation of the flash plugin/activeX as follows.
First, download the Flash uninstall utility on the link below and save it to your Downloads folder.
Flash Player Uninstaller.
When the download has completed, close all browser windows, open your Download folder and run the uninstaller. After this has completed, restart the notebook.
When windows has reloaded, download and install the latest version of Adobe Flash. Note: You may want to deselect the option to include McAfee Security Scan Plus before downloading.
When the installation has completed, restart the notebook.
If the above doesn't correct the issue, then try the following.
First of all, download and run the Shockwave uninstaller on the link below.
http://fpdownload.macromedia.com/get/shockwave/uninstall/win/sw_uninstaller.exe
After this has completed, restart the notebook.
When windows has fully reloaded, download and install the latest version of Shockwave on the following link.
http://get.adobe.com/shockwave/
Again, after this installation, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Video is not working with build in camera - HP 856...

Hello,
the video is not working since Skype 6.3
I have HP 8560p with Windows 7 32bit
Also Skype 6.6 is not able to see build in camera.
All the drivers are updated.
Do you have any solution for that?
J.

Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Info on all installed devices should be available in this file.
Be aware that you will have to zip this file before attaching it here.

ITunes keeps saying that my 60GB iPod with Video is corrupted when it's not

I have an 60GB iPod with Video that iTunes keeps saying is corrupted when I connect it to my MacBook Pro. Although it seems to only happen after using it for more than a short amount of time before syncing it. I just watched a 5 minute video after I ejected my iPod and when I synced it after that, iTunes did not say it was corrupted. Although when I used it for over 3 hours earlier today and synced it, iTunes said it was corrupted. When iTunes says it is corrupted, I eject the iPod and resync it, and it's always fine the second time. This issue has been ongoing for a month or two now and it's starting to get annoying. I bought the iPod last June.

it can be some corrupted files or bad sectors on the HD of your iPod, see doing the following helps
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”

Old Composite Video cable (Tangerine iBook) not compatible with Video iPod

I discovered a little surprise.
Despite being exactly identical on both ends of the cable, an old Apple Composite Video cable, originally purchased for a Tangerine iBook, is not compatible with Video iPod.
Anybody confirms such situation, or is it just my Video iPod with a faulty video output?
Ciao
30G Video iPod Fifth Generation Mac OS X (10.3.9)

Gerardo
The cable may look the same but it's wired differently. Please see this for more info :
http://www.tuaw.com/2005/11/01/how-to-convert-an-ibook-av-cable-to-an-ipod-av-ca ble/
regards
Brian

Quartz Screensaver with Video - synchronous not fluent, asynchronous crashes

Similar Messages

Maybe you are looking for