Quckly turn Data Services on and off

Does anyone know of a way to set up the 9330 Curve to quickly turn data services off or on?  When in the office, I want the phone to be on, but not data services.  I wish there were a way to set up a smartkey to turn off or on data services.  Any ideas?

In addition, if you want a really easy method to go to Manage Connections, you can set up one of your convenience keys to do that.  Go to Options > Screen/Keyboard (may be slightly different in OS 6) and  scroll down to the convenience key settings.  You can then pick which convenience key you want to use to bring up the Manage Connections option.
Alternatively, you may want to look into third party apps to see if you can find any that control such a function.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Similar Messages

  • Turning data logging on and off with a boleen push button

    I am trying to log three analog signals to a
    spreadsheet. I have no problem doing this but my application requires the need to turn the
    data aquisition to the spreadsheet on and off. I
    would like to accomplish this with a boleen push button. If anyone knows how to do this I would appreciate the help. Thanks in advance.

    You are probably using the Write to Spreasheet.vi.
    If so you can simply place it in a case structure controlled by your boolean, remember to set the append to file input TRUE.
    In this basic way you open and close your file each time you enable or disable the writing.
    A more efficient approach is to open the diagram of Write to Spreadsheet File vi copy it in your diagram and place only the Write File+ (string)vi in your case structure.
    Let your file to be opened at the start of your vi and close at the end

  • "no service" happens once everyday, and when i restart my phone, signal goes back. So everyday, i turn my phone on and off to get my signal back..HELP!

    "no service" happens once everyday, and when i restart my phone, signal goes back. So everyday, i turn my phone on and off to get my signal back..HELP!

    i had this problem on 5.0.1 Firmware, sometimes it would fix using the Airplane Mode Switch (turning it off and turning it back on)..
    are you on Firmware 5.1.1?

  • My phone constantly turns it self on and off, it won't let my messages load I carnt text or receive and texts or calls, I have updated the new iso7, can anyone help?

    My phone constantly turns it self on and off, it won't let my messages load I carnt text or receive and texts or calls, I have updated the new iso7, can anyone help?

    Hello Bricky2013,
    The following article has some useful tips that can help stabilize your iPhone.
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • Sign in to itunes store will not disappear and the whole IPad will not let me go into other screens till this pop up goes away.  I have entered the password several times and still will not disappear.  Turned the IPad on and off but the pop up remain

    sign in to itunes store will not disappear and the whole IPad will not let me go into other screens till this pop up goes away.  I have entered the password several times and still will not disappear.  Turned the IPad on and off but the pop up remain

    FIrst try a soft reset by holding down the home & sleep/wake buttons until the Apple logo appears then let go & let the iPad boot up normally. 
    If that doesn't help then to make sure you have a strong internet connection.
    Try resetting Network Settings
    Settings->General->Reset->Reset Network Settings,
    You won't lose any data but will have to log back into your wifi networks.
    Once logged back in and when the pop-up appears, try entering your password again.

  • When I try to open my iTunes on my iPhone 4S it shuts off right away. Ho do I fix this? I have already turned my phone on and off a bunch of times

    Every time I try to open my iTunes app on my iphone 4 s it opens but then shuts down right away. I have already turned my phone on and off and did the reset thing by pushing the home and sleep button together and I hooked up my phone to my computers to update and none of these have worked. What works? Does anyone know?  Thanks

    Hi
    I've got a similar problem.  iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error.  I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified" 
    Any ideas?
    Rick

  • HT201401 last night my iphone screen all of a sudden was solid blue and now it is black. I put it on the charger and this morning it is totally black.  However, I did hear the text message signal go off. When I turned the volume on and off a big white bel

    Last night my iphone screen all of a sudden was solid blue and now it is black. I tried turning it on and off.  Still nothing appeared on the screen.  I put it on the charger and this morning it is totally black.  However, when I hit the on and off button, I did hear the text message signal go off. When I turned the volume on and off a big white bell flashed.  In the last week, there were some other display problems such as the screen blowing up large. The only way to fix it was to turn off the phone and then turn it back on. 
    What does all of this mean? It seems like I've had these problems since the iphone 4 upgrade.

    just do reset, press home button and power butoon for a while untill you can see apple
    gud luck

  • Is there a way to turn the camera on and off remotely?

    Does anyone know of a way to turn the camera on and off remotely? I have a client that wants to mount a camera to the ceiling to photograph large rugs on the floor. We need a way to turn the camera on and off remotely and I am lookin for a solution.
    Thank you.
    Aric Attas
    [email protected]
    www.photonlab.com
    Solved!
    Go to Solution.

    I have at least one Canon remote that I've used with my 7D's. Unfortunately, I don't have it with me, because today's shoot doesn't require it. So I can't give you the model number. (Models come and go anyway.) It has a shutter button that you can press halfway to activate auto-focussing, just like the button on the camera. But you do have to make sure that the camera has an IR sensor. On a Canon DSLR, look for it where the fingers of your right hand would cover it up; I think that's intentional, so that a spurious IR beam won't fire the shutter while you're taking hand-held shots. Also, check that the camera and the remote are compatible, e.g. that they agree on the frequencies of light that are to be used.
    Bob
    Boston, Massachusetts USA

  • TS1398 Hi. My wifi keeps disconnecting. I kkep turning the wifi on and off in settings but will disconnect again after a minute or so. I use an ipad2 and my ios is updated. How to troubleshoot? - kay peralta

    Hi. My wifi keeps disconnecting. I keep turning the wifi on and off in settings but will disconnect again after a minute or so. I use an ipad2 and my ios is updated. How to troubleshoot? - kay peralta

    Is this happening with one particular network or with all?  Make sure iOS is updated on the device.
    Try this:
    Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
    Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
    Reset Network Settings
    Go to settings/general/reset/reset network settings. Then try to connect to network.
    If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
    If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions).

  • HT5569 4S phone to IOS 7.1.2 and lost my wi-fi.   The wi-fi is on, but can't find ANY networks.   I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 an

    I updated my 4S phone to IOS 7.1.2 and lost my wi-fi.   The wi-fi is on, but can't find ANY networks.   I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 and lastly going to the Apple store for help.   They tried all the exact same steps I did, took the phone apart and looked at and said it is in "pristine" condition.   They have no idea why it isn't working, but they could offer to sell me another phone.    This is extremely annoying!    They claim it has nothing to do with the update to 7.1.2, but that is when I lost the wi-fi, so it has to be related!

    My 4s i-phone which is 2 years old cannot find any wi-fi networks not even my home network... I had the same problem two months ago but i turned off the i-phone for 8 hours and then it was okay... Now it happened again.... I tried to restart the modem but whilst my laptop is connected regularly, my phone still cannot find any wi-fi networks... I restart the i-phone, i reset it, i chose reset network settings, reset all settings, i turned it off for a whole day in case it was overloaded, i turned on the airplane mode and turned it off again, i put it into the freezer for 10 minutes within a zipped bag but 3 days now and i still cannot be connected to my home wifi... I went to the technician today and he told me that it means that wi-fi is broken and that i need to change it with a charge of 70 euro but i have to give my phone for 10 working days so as to be fixed... I am so frustrated and i don't know if i want to give 70 euro for wifi since i don't know if it would make the same problems again... 

  • Turning wireless card on and off

    I just got my new laptop and am putting Arch on it of course.  It has the Intel 3945 card which is pretty common so I thought I'd use the iwlwifi driver.  I followed the Wiki and even perused a couple other laptop wiki entries with the same card to see how they did it but none of them have worked correctly.  I think the reason is because the actual card isn't turned on.  When I boot into Windows the little wifi light comes on indicating the card is active and I can connect to a wireless network then but when I boot into Arch the light is off.  iwconfig wlan0 essid mynetwork and iwconfig wlan0 key ******** both run without error but I don't have an IP address.
    The only problem is there's no key combination to turn the card on and off.  It's a little button that you slide one way to turn on bluetooth and wireless and the other way to turn it off.  The bluetooth light is on in Linux but not the wireless.  It's driving me crazy because I can't seem to find anything in the manual about it and the card is set to be turned on by default in the BIOS.  What else can I do?

    OK, I think I figured it out.  I'm now using my wireless card to browse the Internet.  I think what was happening was my wired interface (eth0) was conflicting with my wireless interface.  Once I brought my wired connection down, I was able to connect with the wireless one.
    Maybe someone can simplify the process for me now.  I've disabled eth0 in rc.conf but in order to get the wireless up and running I have to bring up wlan0 with ifconfig, use iwconfig to configure the essid and key and then connect through wifi-radar (even though wifi-radar already contains the correct configuration).  That means I can't just connect with wifi-radar after boot.  I have to run those iwconfig and ifconfig commands first.  I considered putting wlan0 as an interface in rc.conf but the Wiki entry I read said not to do that for the 3945 card.  So is there any way to streamline this process?
    And I guess Linux just doesn't send any power to the little light even though it does for the bluetooth one.  That really doesn't boher me but it did throw me for a loop the first time around.

  • Automatically Turning the Aiport on and off

    Is their anyway to turn the airport on and off remotely or prevent it from accessing the internet? i.e. your not having to physically unplug it to prevent it from going online?
    I am curious if I can remotely (via my MBP) disable the connection to the internet at certain times?

    1. I'm not sure how "remote" you had in mind but yes - it is possible to configure your Base Station from anywhere on the internet as long as you (a)have enabled the option to configure the base station via its WAN port and (b) you know the base station's public IP address.
    2. You can limit client connections to the base station by enabling MAC address based access control, and either adding or removing the MAC address of wireless clients
    3. You can not limit cabled client connections. If a computer is cabled to the Base Station, that computer will have access to the internet as long as the Base Station is powered.

  • TS3899 My email inbox doesn't update properly.  Specifically, it currently only downloads emails dated through 1/20/14 and today is 2/20/14.  I deleted the email account and added it back again, I rebooted my iPhone and I turned Airplane Mode on and off.

    My iPhone 4S currently only downloads emails dated through 1/20/14 and today is 2/20/14.  I deleted the email account and added it again, I reset my iPhone and I turned Airplane Mode on and off, but nothing seems to work.  Any suggestions?

    Are you saying it's not getting any email from AFTER 1/20/14, or are you saying you're only seeing mail FROM 1/20/14 to now?

  • TS1702 Can anyone help? For no reason, I cannot open any of my apps.  I can open everything else, just not apps.  I have turned the ipad on and off several times, this doesn't work.  Does anyone know what to do and why this has happened?

    Hello, for some strange reason I cannot open any of the apps I have.  I have tried turning the ipad on and off and this doesn't work.  I can open everything else (videos, camera, etc) just no apps.  Can anyone help please?

    If it's the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
    If it's all apps including Apple's then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • My iMessage has been sketchy lately. One text it will say my iMessage was delivered the next it won't and I have to send it as a text message. I keep turning my phone on and off and turning iMessage on and off but nothing works. How do I fix this?

    My imessage has been sketchy lately. One text it will say my iMessage has been delivered the next I have to send it as a text message. I've tried turning my phone on and off and turning iMessage on and off repeatedly. How do i fix this problem?

    It takes two to tango, maybe it's your recipient that has weak Internet/Cellular connections.

Maybe you are looking for