Que about Material Management

Hiiii My Guru ABAPers....
Here i have stuck once again with a question of material management...
Let me describe my question :
I am told to make a report of mm whose fields are used in transction ME23N.
here in condition sub-tab there are fields exists called "condition type" , "name",
"amount" , "currency" and "condition value"...who all defenately contains some values... but dears i am not able to find out WHICH TABLE-FIELDS holds these values ... by going into technical info it shows the "KOMV" STRUCTURE ... and that is logically impossible that any database structure could hold any value...
here i am waiting for ur reply...
Warm and scare(just kidding) regards,
Nirav Parekh

Hi kunjal...
Thanks for ur reply and hospitility...
but could you tell me how to bebug the transction like : ME23N as its a standard
T-CODE .... after entering it into addressbar i get the screen described by you...
but how can i come to know that from where these values coming from as i dont get to chance to write '\h' inbetween this...as i used to do debugging by it...

Similar Messages

Best methods and ways of learning about material management before training in SAP MM?

Hi All
Need your guidance here,iam at the first step ,joined now in SAP MM and need methods of learning and ways that i should take before attending the training of SAP MM.Iam a fresher with 2 yrs of experience in production support(RETAIL)
Regards
SAIKUMAR A M

Saikumar,
Not sure what you mean by "joined now in SAP MM". Do you have a job where you do SAP MM? Are you planning to take coursework through a certified training provider?
In general, I recommend you buy an overview book on SAP and on SAP MM. Also, check out one of the many youtube overviews of SAP and/or SAP MM. This should help you get your bearings a bit.
You might want to check out
SAP Career Blog Links
Learning SAP when you don't have an SAP job already - Books
Advice for Recent College Graduates (aka "Freshers")
FAQ: How do I get my first SAP job?
Hope this helps!
Best regards,
--Tom

New to material management

Hello. I'm completely new to MM and I have a problem. Recently I worked with BW module and it was easy for me to participate in SAP BW courses. Each BW training started with BW* (like BW310, BW315, etc.). I can't find any informations about MM* trainings. Could anyone tell me what CODE does "material management" have, and is MM a part of SCM (supply chain management)?

Hi,
Not exactly but in business context MM is part of supply chain.
If u are going for SAP certification ECC 6.0 release than MM comes in SCM only.
For ECC 5.0 onwards SAP has clubbed everything in SCM.Before that MM was not part of SCM course name was TAMM40 etc....but now it is TSCMXX
Hope this clears ur doubt.
Regard,
AM

SAP Material Management Certification

Hi All,
I will take the Material Management Certification, does anybody have question for my reference.
Regards,
Luke

Dear,
Top of the all answers, self study, well understanding and indepth process steps of MM is important for certification.
Secondly, if you want to get few hints about sample questions and answers, you can search on net and you will find lot.
The best ever website which you can gain MM questions is :
http://www.daypo.net/test-sap-mm.html
This is the best.. do the test again and again until you get the correct answers. Correct not in the sense puzzling with answers again and again, understand the fundamentals of question and answers.
Regards,
Syed Hussain.

My ipod wont update any apps, it says something about storage managment but i have 4 gigs left and all of my iclous storage left. Is their ayway to fix this

my app store wont let me update any apps when i click the update all button it doesnt do anything and eventually says i need to manage my storage, i have 4.4 gigs left and all of my icloud storage left and i just deleted 5 app hoping it would make room but it didnt work. is there something that happened to itouch 3rd gen during th ios5 update or something? please let me know if there is anything i can do

it says something about storage management
Try these support articles...
iCloud: Managing your iCloud storage
iCloud: Purchasing iCloud Storage and Billing

Posting periods in material management

hi mm gurus,
i m fico guy, i need some help form ur side. the t.c. MMPV is closing the posting periods in MM is it right, then what is OMSY? as per as my knowledge in MM we have a chance to open only 2 periods, in OMSY the periods belogs open periods? or closed Perids?
my question in OMSY the periods belongs open or closed?
can u explain please.
thanqu

The T code OMSY is for Activating Material Management against a Company code.
Maintain the Material Master company code in OMSY.
This is done when you want :
1. To create a material master record, the control record must exist for the company code for which you want to create your master record.
2. To set up a company code, enter the current period here.
3. When changing the Allow backposting or Disallow backposting indicators
You can also use MMRV to set the Allow/Disallowed backposting indicators.
The current and previous period is shown on both transaction codes.
As MMPV is only Used for Opening / Closing MM Periods.
There are a number of activities that are managed by period in the materials ledger including: certain stock totals valuations, price units, goods movements, etc.
MMPV executes program RMMMPERI to close the current period and open the new one.
Please Go thru the Link :
http://www.sapcustomization.com/help/scr/OMSY-Maintaining%20Company%20Code%20for%20Materials%20Management.htm
Regards,
Ashok

Two questions about Risk Management 2.0

hi experts,
Please find below two questions about Risk Management:
-In SPRO, Risk Management>Create top node: after completing information and executing I have this error:
Error in the ABAP Application Program
The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/ORM/SAPLORM_API_SERVICES " in
include "/ORM/LORM_API_SERVICESU10 " in
line 97:
"Bei PERFORM bzw. CALL FUNCTION "GET_ORGUNIT_THRESHOLDS" ist der Aktual"
"parameter "I_ORGUNIT_ID" zum Formalparameter "IV_ORGUNIT_ID" inkompati"
"bel."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
Do you know where it could come from?
-On the Portal>Risk Management
when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Do we have to set up some customizing points before accessing these links?
Thank you !
Regards,
Julien

Hi Julien ,
I have the same error what u described as :-
-On the Portal>Risk Management
when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Do we have to set up some customizing points before accessing these links? "
Are you able to solve this. Please let me know how to resolve this???
Thanks
Regards,
Atul

Material Management Flow and FI/CO Flow

Hi All,
Can anybody send me detailed processflow of Material Management and FI/CO or any websites providing the same.
Thanku
sanju

Hi Sanju,
By using this site you will get more information rearding MM flow:
script names
For fi/co architecture open this link, it will be help ful to you..
script names
Hope this helps you, reply for queries, Shall post you the updates.
Regards.
Kumar. .

Company code set up for material management

Experts,
When I try to create sales order error is coming Comany code IN02 not set up for material management. In OMSY I have changed current and previous accordingly.
Resolve this.
Thanks & regards,
Supriyo

Mr. Naren,
This is not a reply from an expert. I am practicing in IDES on my own in my house. I try to do all things in configuration on my own with the available study material.
Whenever I get any error first I try myself whether it takes 2/3 days to get it resolved. Then I go to Google for further search help. Finally I go to SCN.
Thanks & regards,
Supriyo

How to setup a company code for material management

Hi,
While creating material in MM01, in sales org tab, when I gave plant XXXX, it is giving an error "Company code YYYY is not setup for material management".
So can you help me , how to setup a company code for material management
Help is appreciated
thanks
DIL

Hello Sendil,
You can maintain it with trns code OMSY or MMPI/MMPV.
Hope this helps
Regards
Arif Mansuri

Differences between SAP R/3 ECC 6 & SAP R/3 4.6C in Material management mod

Dear Friends,
Please mail to me the differences between SAP R/3 ECC 6 & SAP R/3 4.6C in Material Material management module.
With regards

Hi Vasmi
There is lot of Diffenence Between ECC 6.0 & 4.6 C
1-in 4.6 C Country India Version(CIN) is add on Separatelly
while after 4.7 E up to ECC 6.0 CIN is integrated Part of SAP. that is the measure difference as per my knowledge
2-ECC 6.0 have more functionality in terms of transaction for example
if you do MIGO for PO then you can capture and post the excise invoice in the same transaction while in case of 4.6 C that feature is not available
these two are major as far as MM is concern
there are many others feature also
Thanks

I need a bapi for material management advance shipping notifications

i need a bapi for material management advance shipping notifications for developing powls which includes below fields and some more fields.
     Inbound delivery number
     Due date (GR date)
     Vendor delivery number
     Material
     Name of material
     Quantity
     Vendor
     Name of vendor
thanks and regards,
jameer.p

Hi Jameer,
This is a hard one, my friend. I understand what you are trying to do.. Try BAPI_DELIVERYPROCESSING_EXEC. It is tricky though.
Moreover you might want to use a FM to fill the IDOC data. something like IDOC_INPUT_**. this might be a better option.
cheers,
Hema.

Problem about space management of archived log files

Dear friends,
I have a problem about space management of archived log files.
my database is Oracle 10g release 1 running in archivelog mode. I use OEM(web based) to config all the backup and recovery settings.
I config "Flash Recovery Area" to do backup and recovery automatically. my daily backup schedule is every night at 2:00am. and my backup setting is "disk settings"--"compressed backup set". the following is the RMAN script:
Daily Script:
run {
allocate channel oem_disk_backup device type disk;
recover copy of database with tag 'ORA$OEM_LEVEL_0';
backup incremental level 1 cumulative copies=1 for recover of copy with tag 'ORA$OEM_LEVEL_0' database;
the retention policy is the second choice, that is "Retain backups that are necessary for a recovery to any time within the specified number of days (point-in-time recovery)". the recovery window is 1 day.
I assign enough space for flash recovery area. my database size is about 2G. I assign 20G as flash recovery area.
now here is the problem, through oracle online manual, it said oracle can manage the flash recovery area automatically, that is, when the space is full, it can delete the obsolete archived log files. but in fact, it never works! whenever the space is full, the database will hang up! besides, the status of archived log files is very strange, for example, it can change "obsolete" stauts from "yes" to "no", and then from "no" to "yes". I really have no idea about this! even though I know oracle usually keep archived files for some longer days than retention policy, but I really don't know why the obsolete status can change automatically. although I can write a schedule job to delete obsolete archived files every day, but I just want to know the reason. my goal is to backup all the files on disk and let oracle automatically manage them.
also, there is another problem about archive mode. I have two oracle 10g databases(release one), the size of db1 is more than 20G, the size of db2 is about 2G. both of them have the same backup and recovery policy, except I assign more flash recovery area for db1. both of them are on archive mode. both of nearly nobody access except for the schedule backup job and sometime I will admin through oem. the strange thing is that the number of archived log files of smaller database, db2, are much bigger than ones of bigger database. also the same situation for the size of the flashback logs for point-in-time recovery. (I enable flashback logging for fast database point-in-time recovery, the flashback retention time is 24 hours.) I found the memory utility of smaller database is higher than bigger database. nearly all the time the smaller database's memory utility keeps more than 99%. while the bigger one's memory utility keeps about 97%. (I enable "Automatic Shared Memory Management" on both databases.) but both database's cup and queue are very low. I'm nearly sure no one hack the databases. so I really have no idea why the same backup and recovery policy will result so different result, especially the smaller one produces more redo logs than bigger one. does there anyone happen to know the reason or how should I do to check the reason?
by the way, I found web based OEM can't reflect the correct database status when the database shutdown abnormally. for example, if the database hang up because of out of flash recovery area, after I assign more flash recovery area space and then restart the database, the OEM usually can't reflect the correct database status. I must restart OEM manually to correctly reflect the current database status. does there anyone know in what situation I should restart OEM to reflect the correct database status?
sorry for the long message, I just want to describe in details to easy diagnosis.
any hint will be greatly appreciated!
Sammy

thank you very much, in fact, my site's oracle never works about managing archive files automatically although I have tried all my best. at last, I made a job running daily to check the archive files and delete them.
thanks again.

WHATS THE FLOW OF A PURCHASE ORDER WITH REGARS TO MATERIAL MANAGEMENT ?

WHATS THE FLOW OF A PURCHASE ORDER WITH REGARDS TO MATERIAL MANAGEMENT ?

Hi
see the MM flow with related Transaction codes
MM Cycle:
Purchase Requisition-> Staff in an orgn places Pur requisition for want of some goods/products - ME51
Request for Quotation(RFQ)-> The Purchase dept in the orgn calls/requests for the quotation for the products against which PR was raised. - ME41
Vendor Evaluation->After receving the RFQ's, after comparison a Vendor is finalised based on the terms and conditions.
Purchase Order(PO)-> Pur order was issued to that vendor asking him to supply the goods/products -ME21N
Goods Receipt Note(GRN)->Vendor supplies the material/Products to the orgn-
MB01
Goods Issue (GI) -> People receives their respective itesm for which they have placed the Requisitions
Invoice Verification-> ALong with the Material Vendor submits a Invoice for which the Company Pays the amount - .MIRO
Data to FI -> data will be posted to FI as per the vendor invoices
you better go through all these links u will get all the info what ever u need
for mm
http://www.sapgenie.com/abap/tables_mm.htm
http://www.sap-img.com/sap-download/sap-tables.zip
http://www.allsaplinks.com/material_management.html
http://www.training-classes.com/course_hierarchy/courses/2614_SAP_R_3_MM_Invoice_Verification_-_Rel_4_x.php
http://www.sapfriends.com/sapstuff.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSMAT/PSMAT.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOMDMM/LOMDMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMIVMVAL/MMIVMVAL.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMWMLVS/MMWMLVS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMISVE/MMISVE.pdf
Reward points if useful
regards
Anji

Extract information about Travel Management

Hi !!
I need to work on extractor to get information about Travel Management, the user's need to know how much the company spend on travel.
I read some documentation about 0FI_TV_01 and 0FI_TV_02, But I don´t know where I can get more information about how to activate this extractor's and how work on R/3 and connect with BW (7.0)
At this time I konw how work 2LIS_02_ITM and how this extractor was configured and activated on R/3 Systems and their connection with BW.
Please, If you know some documentation or you can send me one tutorial about this extractors, just let me know
I will assign points to you.
Thank you.
Alice

Alice,
My working week is Sunday -Thursday.
It is true that you can see if an extractor is delta-enabled by looking at the table value. It is also apparent in the info-package.
However, the value in the table is not the reason why the extractor is delta-enabled. There is an extractor program which handles the extraction, which, for these extractors have been programmed for full extraction.
Delta extraction in principle is programmed based on certain fields like a change/creation date. Sometimes the business process i.e 'management of the travel scenario' may not be readily amenable to programming data-extraction.
In short, you do not have a quick solution for making these extractors delta-enabled.
There has been some discussion in this forum on the concept of pseudo-delta - take a look at the link below:
Pseudo delta
BR/
Mathew.
Edited by: Mathew Muthalaly on Apr 6, 2008 6:59 AM

Que about Material Management

Similar Messages

Maybe you are looking for