Queires on Non-Cumulative Inventory Management Cube 0IC_C03 Not Working
Hello all.
I am trying to use the 0IC_C03 Inventory Management cube with non-cumulative key figures. I followed the How to...Handle Inventory Management Scenarios in BW paper to a tee.
Steps I followed:
1. Ran initialization of beginning balance with 2LIS_03_BX
2. Ran the historical job with 2LIS_03_BF
3. Uploaded to BW the Initialization (BX) and compressed without setting the "No Marker Update" flag
4. Uploaded the historical movements (BF) and compressed setting the "No Marker Update" flag
Now, to this point, everything was fine. Quantities were as expected. Dollar values were as expected. The problem occurs once I load deltas:
5. Loaded delta for 2LIS_03_BF and compressed without setting the "No Marker Update" flag as instructed in the How To... paper
Query example:
MATERIALA:
Initial Stock Balance = 1000 EA
Delta had stock issue of 150 EA (so the stock balance should have decreased from 1000 to 850)
Now, I have the record in BW showing the stock issue of 150. However, the non-cumulative key figure within the query still shows 1000. And when I drill down by calendar day, I would expect the result to show 850, but it seems to add the 150 before taking it away resulting in 1000 which is actually the initial stock balance. It is like it is not recognizing the updates.
Any help would be appreciated.
Thanks,
Brent
Hi!
Here is what helped in my case, very similar to your:
In DTP for 2lis_03_bx (not only in infopackage, as it is said in manual!) you have to change "Extraction Mode" parameter to "Initial Non-cumulative for Non-cumulative values"
Similar Messages
-
Inventory Management Cube 0ic_c03, 0StockType
In the Inventory Management Cube 0ic_c03 queries,I've found that 0StockType has descriptions that are misleading because of the way they are written in domain bstaus (R3 side), especially when seeing the key and SHORT description (truncated beyond meaning).
OK I can correct these by changing BStaus 's texts.
The main changes I'd do are for the Customer Consigment, Customer Return Packaging and Material Provided to Vendor descriptions.
But what does 0StockType 'blank' (or #) mean ?
(It seems to mean something like Valuated Stock Valuation and 'Not Defined' is not very good in a Query result)Well, no one replied, but I got feedback from OSS. So just in case anyone is interested.....
I had to use r3 > se11 to change the domain descriptions myself.
Bstaus 'blank' I put as 'Valuation'
I also improved some of the Bsttyp descriptions whilst there -
Missing content for inventory management (cube 0IC_C03)
Hi everybody,
I installed the following BI content for inventory management: Cube 0IC_C03, InfoSource 2LIS_03_BX and transfer rules from data source 2LIS_03_BX to info source 2LIS_03_BX. However, I'm not able to the update rule from info source 2LIS_03_BX to info cube 0IC_C03. I can only find the old update rule 0IC_C032LIS_40_S278 -> 0IC_C03.
I also couldn't find the update rule for material movements from 2LIS_03_BF to infocube 0IC_C03.
How can I find this missing content. We are using BI Content Release 704 Level 1.
Thanks for your help!
ThomasHi Oscar,
unfortunately, I was not able to find a transformation for the datasource migrated to 7.0.
Btw, how do I determine to which version data sources are replicated. I have an underlying ECC6.0 system. When I replicate all data sources for that source system, datasources automatically show up as 7.0. I'm missing the pop-up question whether or not I want to replicate as 3.5 or 7.0.
Thanks in advance!
Thomas -
Non-cumulative Inventory cube to snapshot Inventory cube scenario
We currently have a non-cumulative Inventory cube in production system and the stock values match to ECC data. Now we want to build a snapshot cube (to improve query performance) and the question is can we use the current cube (non-cumulative) as data source for the new snapshot cube or do we need to load it from ECC? Is there any special handling needed if it is loaded from current cube?
Thanks!Hi,
You can use the existing cube, but make sure that you have implemented the OSS Note 1426533 before doing this.
Regards,
Raghavendra. -
Cubes on the Materials management Cube 0IC_C03
HI,
We need to create cubes on the Materials management Cube 0IC_C03 to take care of the huge inventory data we have . These will be a copy of 0IC_C03 and 0IC_C03 will be a staging layer.
Want to know how will the marker update will work on the new cubes?
Thanks.
NitinHi,
Look this link wll give u full detailes about marker updats and so on....
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
***********Asign Points if usefull*******
Cheers,
Satya -
Cubes on Materials management Cube 0IC_C03
HI,
We need to create cubes on the Materials management Cube 0IC_C03 to take care of the huge inventory data we have . These will be a copy of 0IC_C03 and 0IC_C03 will be a staging layer.
Want to know how will the marker update will work on the new cubes?
Thanks.
NitinHi,
Dont enter duplicate trds pls close trd if u got solution
Cheers,
Satya -
Stock Valuation - Inventory Management Cube
Dear Sap Gurus,
We have implemented the Inventory Management Cube in BW.
Quantities are correct, but we have difference on the stock valuation.
For some material stock value are correct, for some other they are not correct.
A saw a lot of OSS notes and how to on this subject, I am trying to solve this issue using these documents, but based on your experience could you explain me how you solved this issue ????
Thanks,Hi
Did you follow the correct steps?
Initialisation of BX data in the first step.(Loading of Opening Stock)
Then The request in which the opening stock was loaded must always be
compressed with a marker update
Init load of BF And UM in the second step
The request in which the historical material documents were contained
must always be compressed without a marker update and
Successive delta uploads must always be compressed with marker
updates
Check this whether you have done this or not.
Because of missing the steps here also would give you wrong values,
Regards
Ram -
Verizon Access Manager Download link not working
Hi,
Verizon Access Manager Download link not working, Following Links
http://www.vzam.net/download/download.aspx?productid=872
http://pcdn2-download.vzw.com/win/7.7/VZAM_7.7.1_2727b-AC30-Web.exe
plz help to download verizon five spot access manager.
thanks
karthirocksHi karthirocks! I'm sorry to see you're having any difficulties using these links. I've clicked on both, but had no problems getting pages to launch or in getting the application to download. If this is still a problem for you, please describe the issue you're experiencing. Also, please share the browser version you're using, and if you've enabled any security feature that prevents access to certain secure sites or services. Thanks!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport -
Non Cumulative Inventory Cube Remodel
Hello Gurus,
I've existing inventory cube with non-cumulative key figures with large amount of data. We are using standard non cumulative key figures 0TOTALSTCK, 0ISSTOTSTCK & 0RECTOTSTCK.
Now I've a new requirement to report issues (0ISSTOTSTCK) & receipts (0RECTOTSTCK) based only on LB. Right now they both are in base UOM. Converting them in LB in query (on the fly) is not an option because of volume / performance of report.
I'm planning to do this in backend by adding two more key figures for issues & receipts where i'll convert standard ones in LB. I'm not going to touch any of existing non cumulative key figures. But the overall structure (F table) is going to change.
I'm concerned whether this will work? Any risks? Marker updates?
Thanks.
AbhijeetPlease have a look
http://sap.seo-gym.com/inventory.pdf -
About archiving BW Inventory Management cubes
Hi everyone!
I would like to know what a marker in Inventory Management (BW) is. This question comes from the following: I need to archive a IM cube, and it presents the following option:
Stocks:
Only transactions
Transactions and Markers
I don't know what a marker is, so I'm kinda lost here...
Any help would be greatly appreciated (and rewarded, ofc!).
Best Regards,
Luís.Hi,
Marker is fairly simple, you will get the details also on help.sap.com with more detailed explanation.
In a brief here is what i can tell you :
1. The marker is set on a specific date and the value of the inventory KF( NON CUMULATIVE KF) the value on that particular date is stored in the cube.
2. Since Inventory is working on the non cumulative method the difference is calculated since DAY 1. but with Marker the difference is calculated from the day of marker.
Hence it helps in retrieving faster results.
Let me know if you want more information.
Regards,
Den -
Movement Type in Inventory Management Cube
Hello Guys,
I am new to the area of Invenotry Management. I have seen the How to Guide and blogs by Surendra for Inventory Management scenarios.
One of initial doubt is that the cube 0IC_C03 does not have Movement Type. As per the blog, we can define transaction keys in BW but how do I pull it in my Cube. Is ehnacing the extract strcuture BF the only option? If yes, what logic do we follow to add movement type to BF?
Also as per SAP Note, we cannot enhance BX to include movement type. So would it create a problem if BX does not have a movement type and BF has?
Looking forward to solutions
Thanks n Regards,
AbhishekDear John
The movement type has important control functions in Inventory Management.
For example, the movement type plays an important role in
=> updating of quantity fields
=> updating of stock and consumption accounts
=> determining which fields are displayed during entry of a document in the system
thanks
G. Lakshmipathi -
Non-Cumul. Management with Normal KF (Cumulative KF)
Hi all,
I need info, docs or experiences about <b>Non-Cumulative Management with Normal Key Figures (Cumulative Key Figures)</b> .
I could just find this Sap Help link about it : http://help.sap.com/saphelp_nw04/helpdata/en/8f/da1640dc88e769e10000000a155106/content.htm
Thanks,
RozzHi,
Check out if these help :
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how to handle inventory management scenarios.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_bw320/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm
Cheers,
Kedar -
How to get average stock in the inventory management cube?
Dear all,
I need to get average stock for a month.
For example: stock on May 1st is 30kg, stock on May 2nd is 20kg,etc. I need to add these everyday stock together and divided by the days of the month.
Now I have a non-cumulative key figure with inflow and outflow for stock. Is any way I can do this without bringing very bad performance?
Regards,
BoluncOULD YOU PLEASE EXPLAIN ME HOW DID YOU SOLVE YOUR PROBLEM
-
IPhoto does not open back-up library and requests library manager which does not work either
Hello,
I have a problem and NO idea how to fix it. I try to write it in bullet points to make it easier to read:
- My MacbookPro (from 2009) with current software (mavericks, all updates) went offline due to lack of battery while I was working in iPhoto
- When I rebooted the Mac, iPhoto said that the library is damaged and should be repaired
- The "repaired" version had lost tons of organizing elements (e.g. the order of the pictures and so on) so I used my time machine and took a back-up of the library from 1 hour ago
- The back-up library was copied successfully in the according file (user-pictures) after I deleted the current one
- When I wanted to open iPhoto now it requested to use the library manager as the version of the pictures are "old"
- I downloaded the library manager and tried to use it, however, this tool explains me now that the pictures were used with a newer version of iPhoto so I shall open iPhoto instead
- Again, when I then try to opne iPhoto, it requests the library manager and so on
So, I am not able to get access to my pictures again, although the library in the folder seems to be of correct size (around 55 GB). Does anyone have any idea how to fix that problem?
Many thanks in advance!!!
JohannesOption 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Report on Virtual cube is not working.
Hi,
I created a report on virtual cube, Virtual cube is based on Function module which will pick data from Multiprovider, In the FM mention the import parameter name as " Muli Provider" Name.
Multiprovider built on SPO object , On SPO object BIA is created, If can de activate the BIA on SPO then the report built on virtual cube is working in the portal. If I can activate the BIA the report is not working in the portal.
The report is working fine in RSRT and Analyzer either BIA is active and deactive.
Regards
GKHi
The multi cube you created must be comprising of Info cubes, DSO and Info objects. Now this error which you are getting is it for
- a specific characteristics or
- any characterisitcs that is entered fourth in the series of filter selections or
- the fourth value in a specific characteristics
Is the characteristics and the value which you use in filter present in all the underlying objects included in the multi cube ? You can check it in each of the objects associated in the multi cube, independently. This will give you an idea as to whether the error reported by the system is genuine or not.
Cheers
Umesh
Maybe you are looking for
-
I have changed my bank details and no longer have my 3 digit security number. I have tried to change my bank details but my security question answers are not recognised. What should I do?
-
How to make Output WebService accessible?
Hello, another problem arose in our implementation of xMII as a shop floor integration tool. We are building a service oriented architecture and thus want to employ the WebService functionality of xMII. By using the WSDLGen we have built a Client who
-
It will be used in business cards, brochures & other marketing materials so I want to keep the image looking the same while resizing it. can I do that? how? I have adobe illustrator cs2
-
Oracle OLAP as OBIEE Data Source
I've got a couple of questions regarding the use of Oracle OLAP (Analytic Workspace/Cube) as an OBIEE data source. First: As a general rule when creating a dimension, we create a total roll-up for the dimension i.e. "Total Product", "Total Geog", "To
-
WLAN API is misreporting 802.11ac channel widths
I'm working with a high density Aruba Networks wifi deployment. To avoid co-channel interference, I've dialed my channel widths back to 20MHz only. I've confirmed the config with the vendor and written up the results of what I've found on my blog (if