Queries available in Production vs Query been used

Dear All,
We had collected the statistical data from ST03N and found that only 523 queries are been used,and when we seen in Metadatarepository there are 2000 queries active in our system,
pls suggest what should we do wether we delete the queries which is not been used,by deleting or deactivating the queries will help in performance or database growth,pls suggest..
these all queries has been attached in EP as ivew where user is executing the report.
Thanks,

Jyoti,
The space occupied by the query is extremely small - the query is an SQL definition - - by deleting unused SQL queries or stored procedures in a database you do not get any space saving out of the same.
The question as to whether they should be deleted or made inactive?? is a decision best left to business - and also you will have to check if any views on the query exist which are beig used and also any workbooks that may use the same..

Similar Messages

Cannot install Sharepoint 32bit due to product key issue - may have been used on Trial Office 2013

Hi,
I have a 32 bit version of Office 2010 Professional installed. I have attempted to install SharePoint 2013 but it fails saying the product key has been used before possibly in an Office 2013 trial version.
Any idea how I circumvent this? Is it possible to get an alternative product key - although the install process does not allow a product key to be entered.
Thanks,
Alan Johnson

What are you trying to install? It isn't 'SharePoint' as that doesn't have a 32 bit version. On it's own 'SharePoint' refers to SharePoint Server or Foundation, which are server products that you connect to from your computer but do not install locally.
It is also not common to install Office on a SharePoint server (but not unheard of either).
SharePoint Designer, which is very different from 'SharePoint' does come in 32 bit as does 'SharePoint Workspace'.

Information on Query not been used at all

Hello Experts,
Please let me know how can I find queries which have not been used at all.
Queries been used by which User and last used.
please let me know which technical content can be used to find this data so that the table RSDDSTAT has entries.
Thanks,
Santhosh

Hi santosh,
Check for the tables RSDDSTAT_OLAP ( Bw 7.x) and RSDDSTAT (BW3.x) systems.
Here you can get the required info what you are looking for..
You can check the statistics content MP : 0TCT_M01/02 --> also try to install the reports on the top of this MPs where you can find the query usage statistics reports.
Regards
KP

My mac air 2011 was stolen, but luckily i got it back. The one who stole it had been using it, so i erased both HD drives. Now it cant get lion x installed because it is not available in the App store. What to do ?

My mac air 2011 was stolen, but luckily i got it back. The one who stole it had been using it, so i erased both HD drives. Now it cant get lion x installed because it is not available in the App store. What to do ?

You may order Lion from the Apple Online store:
http://store.apple.com/us/product/D6106Z/A/os-x-lion
Ciao.

I have a Windows copy of Photoshop Elements 11, but the serial number has been lost. I didn't buy the product and I am unable to find the box. As far as I know, it's never been used so has not been registered. Does anyone know how the serial number can be

I have a Windows copy of Photoshop Elements 11, but the serial number has been lost. I didn't buy the product and I am unable to find the box. As far as I know, it's never been used so has not been registered. Does anyone know how the serial number can be recovered under these circumstances?

If you never bought the product then you cannot get the serial number.

My ipod touch screen is totally unresponsive and i have been using it under normal conditions. ihave tried the reset and restore but to no avail.everything works as it would normally do on the screen.help pls????

my ipod touch screen is totally unresponsive and i have been using it under normal conditions. ihave tried the reset and restore but to no avail.everything works as it would normally do on the screen.help pls????

Might want to post your question in the correct forum. This is the iPHONE forum.

I am a Macbook user Lion OS X-have been using Target, Walgreens, Shutterfly, etc for 5 years. Recently cannot use any of these photo developing websites because of the "Plug In Failure" error. Have updated adobe flash..still to no avail. Suggestions?

I am a Macbook user Lion OS X 10.7.5 …have been using Target, Walgreens, Shutterfly, etc. for 5 years with photo developing. Recently cannot use any of these photo websites because of the "Plug In Failure" error..which I have never had. Have updated adobe flash player..still to no avail. Suggestions? Thank you.

You need to do a "clean install": http://forums.adobe.com/thread/1267823
That'll remove the old plug-in completely.
Works 99% of the time.

My student has been using Lightroom 4 with Photoshop CS5 on her Mac for well over a year. Because of the difference between the Camera raw version available to her in Photoshop CS5 and the raw process in Lightroom 4, she has been exporting her raw images

Any ideas?

My student has been using Lightroom 4 with Photoshop CS5 on her Mac for well over a year. Because of the difference between the Camera raw version available to her in Photoshop CS5 and the raw process in Lightroom 4, she has been exporting her raw images from Lightroom and choosing the "Render using Lightroom option when it popped up in the dialogue box. She has been doing this for over a year and a half without any problem. Today when she hit Command E no dialogue box appeared and the image just opened in Photoshop. I'm concerned that all of her Lightroom edits are not being rendered to Photoshop. Anyone have an idea as to how we can get the "Render using Lightroom" dialogue back?

Bridge will not now let me use camera raw, though I had been using it every day. It says that "the parent application is not active. Bridge requires that a qualifiying product has been launched at least once to enable this feature." What am I to do?

Bridge will not now let me use camera raw, though I have been using it every day. It ways that "the parent application is not active. Bridge requires that a qualifiying product has been launched at least once to enable this feature." What am I to do?

Usually this points to having some kind of earlier trial version still installed on your system. However without more details you are not likely to find an answer. Try this for a start:
How To Get Help Quickly

How come I could not download anything today? It keeps saying my app is not available in the US store and that I must first switch to Philippine store. But I have long been using Philippines as my location. Pls help me.

How come I could not download anything today? It keeps saying my app is not available in the US store and that I must first switch to Philippine store. But I have long been using Philippines as my location. Pls help me.

Try going to the bottom of the Featured tab in the App Store app on your device and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select the Philippines.

I have been using CS6 for two years without incident. Suddenly the Media Encoder stops working, showing APPCRASH and displaying error message about WatchFolder.dll - I tried uninstalling and re-installing to no avail - can anyone help

I have been using CS6 for two years without incident. Suddenly the Media Encoder stops working, showing APPCRASH and displaying error message about WatchFolder.dll - I tried uninstalling and re-installing to no avail - can anyone help?

Hi Mylenium,
Thanks for your response.
Here is the error information showing up:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Media Encoder.exe
Application Version: 6.0.0.382
Application Timestamp: 4f62fcf1
Fault Module Name: WatchFolder.dll
Fault Module Version: 6.0.0.382
Fault Module Timestamp: 4f62f37f
Exception Code: c0000005
Exception Offset: 0000000000007899
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105
Additional Information 1: 9a62
Additional Information 2: 9a620826d8ae4a2fa8b984b39290a503
Additional Information 3: 1fb3
Additional Information 4: 1fb304eee594288faeefbf1271b70d37
I am using a PC Windows 7

How do I verify that a product code hasn't been used yet?

How do I verify that a product code hasn't been used yet?

By yourself? Only by attempting to register it yourself in your name.
Maybe Adobe customer can help you if you call them.
These are user to user forums.

Where can I find a list of acceptable products that could have been used to apply to a Creative Suites Design Standard 4 Upsell?

Where can I find a list of acceptable products that could have been used to apply to a Creative Suites Design Standard 4 Upsell?

Upsells are completely independent of any specific requirements, which is the whole point.
Mylenium

I have been using xfinity for some time with no problem. Now when I open it, it shuts down. I have reset, restarted, and done a sync. I also deleted and reloaded to no avail

I have been using the xfinity ap for some time with no problem. Now every time I open the ap it shuts down. I have updated software, reset, done a sync, rebooted to no avail any ideas

My Xfinity App does the same thing. Hope they are coming out with a app update.

Have been using your products since 1984. Very sorry I upgraded to Mountain Lion. Time consuming AND wiped out 2007 Quicken. I guess it would have been too much trouble to have red flagged this situation ahead of time. Out of business, literally.

Have been using your products since 1984. Very sorry I upgraded to Mountain Lion. Wiped out all my old applications. Out of business until I get this fixxed. Can I go back to previous operating system? Time Machine?

Downgrade Lion/Mountain Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.
In the future:
Before upgrading consider:
Don't upgrade if you are in the midst of important work. Wait until you have finished.
If you are having problems with your computer get them sorted out before you upgrade.
Verify that any mission critical software will be compatible with the upgrade.

Queries available in Production vs Query been used

Similar Messages

Maybe you are looking for