Queries from business content

Hi,
When we install the out of the box business content queries from business content where are we able to see those queries. ( Like when we install infocube and dataflow before and we will be able to see it all in modeling area, same way where can we see the queries).
Also when we install the queries will the objects like structures,variables, restricted key figures and calculated figures will also get installed.?
Thanks for all the help in advance.

Well the queries will always be attached to an InfoProvider, so you can easily see a list of queries under each InfoProvider. You can see this in the Open Dialog in Bex, or in the BW system you can do this in RSRT. Just F4 on the query text box and lookup up the queries by InfoArea. You can get a whole list of the queries, but then that would mean going to tables and deciphering the query GUIDS.
Another way is to go to the Metadata Repository and looked at queries within the Local Objects (Activated objects).
Hope this helps...

Similar Messages

  • How to install cubes and queries from Business content in BI 7

    Hi all,
       Could you please help regarding how to install Info Cubes and Querries from Business content in BI 7.0
         And pl send some OSS notes on BW Statistics in BI 7.0
    Thanks in advance

    And also you can go thru the following link:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
    Regards,
    Gattu

  • Problem while installing a query from Business Content

    Hi all of you,
    I am trying to install this particular query Inventory Turnover from the cube 0IC_C03 (Material/Stock Movements) from Business Content. Now in the third pane in Business Content under Active version available column across the name of this cube there is a calendar symbol.
    a.     So does it mean that the cube 0IC_C03 (Material/Stock Movements) is installed along with all the objects that are dependent on the cube and all those objects on which the cube is dependent. (NOTE: I had selected the grouping option as “In data flow afterwars”)
    b.     When I collapse Query Element I find that some of the queries are not installed. So I expanded Inventory Turnover query, right clicked on it and selected Install All Below.
    c.     I am getting this error, “Abort system error in program SAPLRRI2 and form LI_SETZEN-01-“ when I execute the query Inventory Turnover. However in Business Content when I installed the report Inventory Turnover under the cube Material Stock/Movement I didn’t get any error anywhere. Everything was activated successfully without any errors.
    Please tell me how do I install this Inventory Turnover from business content and how do I execute this report from BEx.
    Thank you.
    TR.

    Hi Arun,
    Thank you for that quick reply. I want to activate only the query and not the cube. I did as you advise me but still I am getting the same error when I run the Inventory turnover report from BEx.
    I am able to run other reports from the cube IC_C03. But not this report Inventory turnover. I have also checked the cube and there is data in the cube.
    Kindly adivse what to do.
    Thank you.
    TR.

  • How to open document from business content in weby dynpro ?

    Hello experts,
    I've cretaed a webdynpro where I want to display a document which is attached
    to a product in tx commpr01 in business content.
    I've tested method o_cl_crm_documents->get_with_url , but
    there I do not get a url in webdynpro.
    Does anybody know another method/fm to display such a document from
    business content in webdynpro ?
    Thanks and best regards
    Gerd

    Hello Mr. Jung,
    I'm sorry but I didn't find this method linktourl.
    In my web-dynpro I'm getting the url for my document after
    cklicking on the selected row.
    Then I just want to give this paramter to this linktourl method
    and open the document.
    How can I implement this method ? which class ?
    Thanks Gerd

  • Error while activating 0FIAR_O03 DSO from Business content

    Hi,
    While I am activating 0FIAR_O03 DSO from Business content, getting an error "You do not have authorization for InfoSource 80FIAP_O03".
    Thanks,
    RAJ

    Hi raj,
    The error message clearly tells that you are not authorized...some of the authorization object is missing from ur profile...check the missing Auth object and get it add to ur ID.
    do the following... try to activate the DSO once again ... you will get the message again
    now enter transaction SU53 -- and click ok -- it will display the missing auth object from ur profile.
    if it does not display any thing try to run the authorization trace using ST01 transaction ... to get the missing auth object.
    Regards
    KP

  • Error in installing process chain from Business Content.

    Dear Experts,
    I have successfully installed the Technical Content from Business Content and now trying to install Content Master Data process chain for info package for the same but its showing error.
    <b>Technical Name for Process Chain : 0TCT_MD_C_FULL_P01</b>
    Error after instaling from BI Content : <b>Process AND has no predecessor.</b>
    Finally, while checking in RSPC it comes the name of Process Chain but its not showing anything.
    Also, one more thing is I am trying to install in development system and if that occurs successfully than transport to production as production directly don't wanted to do.
    Thanks in advance.
    Regards,
    NJ

    ithink u have not activated the process chainafter creating the process chain u might have saved it with out activating the process cahin so that is the reason why it is showing name name but northing in the chain first activate the cahin then it iwill show
    try this
    Aravindan pagadala
    satyam

  • Can't create DTP for cube migrated from business content to 2004s

    I am in the process of converting 3.5 Business Content InfoProviders to the new model for 2004s.
    Master data was not a problem, but I’m having a hard time getting InfoCubes to migrate.
    I installed 0PUR_C03 from Business Content and replicated the DataSource into the Data Warehouse.
    I right-clicked 2LIS_02_S013, selected Additional Functions, then chose “Transformation erzeugen” (a.k.a. Create Transformation in English).
    The transformation is generated with no errors and it was activated.  The DataSource is migrated automatically in the process.
    Then, I went to add the Data Transfer Process and that is where I got stuck.
    I right-clicked the cube and took Create DTP.  For source type, I selected datasource.  A dialog box then shows the objects associated with the cube, including the converted infosource, but nothing is highlighted for me to choose from, and I can’t complete the process of creating the DTP.
    Can anyone tell me where I might have gone wrong?

    u got it...
    Message was edited by:
            Raman
    Message was edited by:
            Raman

  • Problem in Installing/ Activating 0SD_C03 Infocube from Business Content

    Hello Friends,
    I am installing an InfoCube 0SD_C03 from Business Content in our BW Development environmant. I first installed "Only the Necessary Components". This took 3 hrs. AFterwards I picked "Before Option" and it kept running for 14 hrs, without completeing. In the last I stopped it to minimize the performance impact to anybody.
    My question is, do you also face any such problem of installation running for hours and hours? How have you handled its resolution.
    Finally, I broken my task into various component and I am installing component by component (e.g. Transfer Rule, Update Riles etc. etc.). But while doing so, human errors are possible and I may miss something. Also we would not like the same activation runs for hours in Production.. So there
    Could you share some of your rich experience and possible resolution. Thanks for your help.
    Gabeesh Mishra
    [email protected]

    Friends,
    Necessary components took 2-3 hrs. I am running "before option" this weekend and will find out Monday. Running on weekend will not impact anybody.
    I am communicating with Basis Team and they are aware of this problem.
    In my previous organization, even Before Option will complete in 2 hrs (maximum). I guess there are multiple factors for jobs running so slow. Of course, I am following all rules of the Game!!
    Thanks,

  • Installation of Datasource from Business content

    Hi Friends,
    While Installing Datasource from Business content in SAP R/3 encounter with following error message. Can some one guide me how to transfer the hierarchy with Business Content. Appreciate your help in resolving this problem.
    Application component FI-GL of DataSource 0FI_TX_4 does not exist
    Message no. R8418
    Diagnosis
    You tried to assign a DataSource to the application component FI-GL. This application component is, however, not entered in the RODSAPPL table as an application component.
    System Response
    The DataSource is saved, but is not visible in BW under the node NODESNOTCONNECTED.
    Procedure
    You do not have the option yet to transfer the application component hierarchy from the Content.
    You transfer the hierarchy with Business Content.
    Thanks & Best regards
    Pravin

    Sorry if a year has gone by.
    This is because you  didn't heve the Application Component Hierarchy installed in BW itself.  Use rsa6 to do this, in the BW system (not the other source system.  Be careful if you have already somehting there, because it will override the hierarchy with the Business Content hierarchy.
    If you need to transport the active hierarchy, and not reinstall all the Business Content Datasources, the object is :
    R3TR DSAA APCO_MERGED
    So, create a workbench transport, and add the above object.

  • Activate Update Rules from Business Content

    Hello,
    I am trying to install 0QM_C10 from business content. Every thing works fine except there are no update rules (there are 3 info sources for this cube). I am new to this and it doesn't make sense for me to manually create (ofcourse the system does the proposal) update rules. Since that is lot of work. I was expecting some transaction / tool where I can activate the update rules from the Business Content (since I can see the update rules in the business content under "Display Description". Is there any tool like that?
    Or, am I doing some thing wrong so the update rules are not automatically installed from the business content along with Cube and info sources?
    Note: I did separate installation for cubes as well as info sources from business content using Grouping by "Only necessary objects" option.
    Thanks in advance.
    Bala
    Message was edited by: Bala Lingamaneni
    Message was edited by: Bala Lingamaneni

    Bala,
    please don't uncheck the checkbox that you find when you open a new thread (let it as default!)...this is the only way to be able to assign points to your helper !
    Write a request (as a normal post) into SDN Suggestion forum in which you ask to Marc Bernard or Mark Finnern to convert this post as question !
    Bye,
    Roberto

  • Update rules not getting installed from business content.

    Hello,
    One more major issue I am seeing is that my update rules for some cubes (0PUR_C01)are not getting installed at all from business content and the errors i am getting are like datasource 0vendor_text not maintained and then there is long list of such red lights. when actually I can see most of the datasources active in the datasource tab on BW side.
    So i dont know how to get these update rules working.
    Please advice,
    Thanks

    Hi Mukund,
    please see also the answer that I provided to your thread
    <a href="https://forums.sdn.sap.com/thread.jspa?threadID=121274&tstart=0">Strategy toward new and 3.x datasource / infosource</a>
    In addtion, you might want to check
    <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/84/497e4ec079584ca36b8edba0ea9495/content.htm">help.sap.com DataWarehouse</a>
    and the online documentation for more general information about data modeling / acquisition.
       Cheers
          SAP NetWeaver 2004s Ramp-Up BI Back Office Team

  • Is it possible to delete data selectively from Business content cubes

    Dear Experts,
             Requesting you to help me out to know, is it possible to delete data selectively from Business content cubes.
    When I'm trying to delete selectively from Business content cubes, the background job gets cancelled with ST22 logs stating
    A RAISE statement in the program "SAPLRSDRD" raised the exception  condition "X_MESSAGE".                                                                               
    Since the exception was not intercepted by a superior program, processing was terminated.  
    and i tried  with few more Technical content cubes but the same thing happens.
    Pls let me know how to selectively delete data from Business content cubes if it's possible?.
    Thanks in advance for your favorable assistance.
    Regards,
    Ramesh-Kumar.

    Hi Ramesh,
    Follow below steps for selective deletion:
    1.     Transaction code: Use the Transaction code DELETE_FACTS.
    2.     Generate selective deletion program:
    A report program will be generated of the given name, here .
    3.     Selection screen:
    Take the deletion program u201CZDEL_EPBGu201D to the transaction code SE38 to see/execute the program.
    After executing it will take you to a selection screen:
    As we need to carry out deletion selective on Calendar week, we need to get the screen field for the field Calendar week. For this, click on the Calendar week field and press F1.
    Click on the technical information button (marked in red box above) you will get below screen:
         ABAP program to carry out the Calendar week calculation
    Problem scenario: As stated earlier the requirement is to delete the data from the cube based on the calendar week. Thus a code must be developed such that the number of weeks should be taken as input and corresponding calendar week should be determined. This calendar week should be then passed to the deletion program in order to carry out the data deletion from the InfoCube.
         Transaction code: Use T-code SE38 in order to create a program.
    Logic: Suppose we need to delete the data older than 100 weeks.
    a.     Get the number of weeks and system date in variables and calculate the total number of days :
    lv_week = 100.      *number of weeks      
    lv_dte = sy-datum.     *system date
    v_totaldays = lv_week * 7.      *total days
    b.     Get the corresponding calendar day from the total days. This is obtained by simply subtracting the total no. of days from the system date.
    lv_calday = lv_dte - v_totaldays. *corresponding calday.     
    c.     Now in order to get the calendar week corresponding to the calculated calendar day we must call a function module 'DATE_TO_PERIOD_CONVERT'. This function module takes input as Calendar day and Fiscal year variant and returns the appropriate fiscal period.
    Get the sales week time elements
      call function 'DATE_TO_PERIOD_CONVERT'
        exporting
          i_date                      = lv_calday
          i_periv                     = lc_sales
        importing
          e_buper                     = lv_period
          e_gjahr                     = lv_year
        exceptions
          input_false                 = 1
          t009_notfound               = 2
          t009b_notfound              = 3.
      if sy-subrc = 0.
        ls_time-calweek(4)      = lv_year.
        ls_time-calweek+4(2)    = lv_period.
      endif.
    v_week = ls_boots_time-calweek.
    Note: We can pass the fiscal year variant which can be obtained from the table T009B.For e.g. here fiscal year variant lc_sales = Z2. LS_TIME will be any table with suitable time units.
    d.     Now we have obtained the required calendar week in the v_week variable. This calendar week is the week till which we need to keep the data. And older data than this week will be deleted. This deletion will be done by the deletion program
    Submitting the Data deletion program for ZEPBGC01 and key field
    SUBMIT ZDEL_EPBG WITH C039 LT v_week.
              Here the calendar week value is submitted to the deletion program ZDEL_EPBG with the screen field of calendar week.
    Hope ... this will  help you..
    Thanks,
    Jitendra

  • Error on installing infoobject catalog from business content

    while performing Install from Administrator Workbench:Business Content I am getting error.
    I am trying to install Infoobject catalog 0MMIC_CHA01 and 0MMIC_KYF01 from business content
    The error messages appearing are as follows:
    Installation (simulation mode) of: InfoObject (IOBJ)
    Checking Objects with Type InfoObject
    Checking InfoObject 0BPARTNER
    Char. 0LEGALFORM is exclusively an attribute (cannot be a navigation attribute)
    Checking InfoObject 0CM_CDT1
    Char. 0CM_HIEID may not appear in compounding and attributes simultaneously
    Characteristic 0CM_CDT1 is used as Navigation Attribute of 0RT_SEAROLL, but characteristic
    IInstallation (simulation mode) of: ODS Object (ODSO)
    Installation (simulation mode) of: Update Rules (UPDR)

    Hi
    It seems although's are warnings and not errors. Instead of using Simulation just install the content.
    check out the below article
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50b1d20e-c1e8-2c10-d9b9-d48eb3a83d89?QuickLink=index&overridelayout=true
    Regards,
    Venkatesh

  • Install Info Object 0BSTAT from business content

    Hi Guys,
    I am trying to install info object 0BSTAT from business content , i have selected the options
                                 grouing "only necessary obects"   "start automaticall" "Hierarchy" ad dragged info obect from left side into collected objects and selected the install and trasport option form Install, assigned the trasnport also, it didn't give any errpor message but info object is not getting activated.
    An body had the expericence with this issue, please share you ideas how to fix the issue.
    Thanks
    Best regards
    Shekar Gunda

    Thanks for your reply Matrin.
    I looked at the log 
    Log is:
    Installation of: Onfo Object (IOBJ)
    You onl have authroization to display info object 0BSTAT
    Transfer/Merge of the content version (Object Type Infoobject)
    Activation of obects with type Info Obect
    Saving Objects with type Infoobject
    Transferring the 1 objects from type IOBJ took 0.4 seconds
    Post-Processing of objects after activation
    The post-processing lasts 0.0 seconds
    Object IOBJ 0BSTAT was written to order/task EWD*******
    You onl have authroization to display info object 0BSTAT
    I looked at the SU53 also  there is one error message  related to info object BSTAT
    Currently aunthorization Field  ACTVT Activit is   "23"
    Does this mean i don't have autorization to install of info obects, do wee need any special activity is required in the for installing info object
    Please suggest me how to proceed.
    Thanks
    Best regards
    SG

  • How to create a copy cube from Business content statistics cube

    Dear Experts,
           I got a requirement to create the new cubes which is a copy of Business content statistics cubes.
    Request you to let me know how can i create a copy cube from Business content cube. My doubt is,weather is't the same as normal customized cube creation  by giving  copy from option.....
    Thanks in advance for your valuable assistance.
    Regards,
    Ramesh - Kumar.

    for copying the cube whose copy is to be made should be available in infoprovider tab in modelling of RSA1.
    first you have to install the business content cube ,so that it is found in the Info-providers tab in modelling .
    for that,first go to business content option found in the modelling tab of t-code RSA1 .
    find the cube and transfer it to the right and execute . It will be available in infoprovider tab of modelling .
    then you can create a copy as we do normally .

Maybe you are looking for

  • Has anyone successfully gotten an HP Color Laserjet 2600n to print from OSX Lion?

    I have it installed by IP address with the drivers that Apple Update provided. When I send a print job to it, the status shows that it's connected and printing and the little sideways barber pole is screwing away, but the job never prints. As a matte

  • SOAP receiver via HTTPS leads to Alert Fatal: bad certificate

    Hello everybody, I working on a scenario where i have to send a message out via https to a partner. The server requires a client certificate which is installed and configured. When I now send out some data I get the following error: com.sap.aii.af.ra

  • Styling LinkButton

    Hi, I am trying to style a linkbutton but it does not work         button = new LinkButton();         button.label = labelProp.getValue(node);         button.styleName = "treeMapLinkButton";         button.setStyle("fontFamily", "Supertext 01");     

  • FM SWW_WI_ADMIN_CANCEL takes time to execute

    Hi All, I have used FM SWW_WI_ADMIN_CANCEL in a report to logically delete workitems. When i execute the FM through SE37 it completes execution within seconds. However when i execute the report , time taken for execution of the FM is very high ( almo

  • OSX fail to while downloading

    Hello,         I recently bought a Macbook pro Late - 2011 from someone. I got it with his pictures, folders, music and everything, so I then decided to reset it to factory setting without the disc. This was a success and everything went smooth and h