Queries on cluster installation with win2k3 & Oracle 10.2.0.4.0 for 640 rel

Dear All,
We are in a process installing sap clustered system for 640 basis release o win 2k3 with Oracle 10.2.0.4.0
However i have followed this steps as below..
Install windows on NODE-A & NODE- B, Update windows,
Install required hotfixes which controls high paging on windows as per sap note
#1009297 Windows Server 2003 Family: High Paging Rates
#1416152 Memory problems with Windows server 2003 and 2008
Tested connectivity to Storage area network as recommended in MSCS cluster guide for both NODES
Installed Java on both nodes & set variables , paging etc..
Configure widows cluster & tested the connectivity by moving the shared disks from NODE-A to NODE-B
Step 2
I have installed Oracle 10.2.0.4.0 with required bug fixes on Both the NODES by switching all the resources
After this step i am pretty confused that do i need to install OFS server & client.
or
Install CI + DB , Configure MSCS NODE-A,NODE-B
then install Oracle OFS server & client & configure & test the connectivity.
At what time my oracle cluster group to be created
At what time my SAP R/3 cluster group to be created
I am also referring to standard instguide & pretty confused on sequence to be followed
Using SAP R/3 Enterprise Core 4.70, SAP R/3 Enterprise Extension Set 2.00, Service Release 1
Please throw some light on the sequence to be followed , so much of time & effort can be saved for me.
Thanks,
Rahul..
Edited by: Rahul on Jul 12, 2010 3:21 PM

Hello all,
Thank you for the inputs provide, I have completed a first run .. with lot of issues..
Currently prparing for a cutover & i just wanted to share few inputs after installing.
The inst guide also suggest same sequence.. which i have followed...
Move all disk groups and cluster group to node A
- Install Oracle RDBMS on both nodes.
- Install OFS on both nodes.
- reboot.
- verify that all cluster groups are online (and on node A).
- Install Central Instance
- Install Database Instance.
- Configure Node A for MSCS
- Convert Database to OFS
- Configure Node B for MSCS
but i was wondering after installing CI + DB i& configured NODE A.
During Conversion of DB to OFS .. my verification failed many times & i found this is the reason..
The database must be cluster-enabled so that it can be switched between nodes as a group
of resources. To do this, you create an Oracle Fail Safe group and then add the database of
the SAP system to this group.
I have done this in the following process....using linkd.exe i have shared the oracle home & mapped to local drives on both the nodes as suggested in DB upgrade & my DB verification was successful..
However it was not provided in Instguide.. or did i missed to read some where..
Please also advice me am i doing it in correct process...for DB cluster enabling
thanks,
rahul..

Similar Messages

Oracle SOA Suite Installation with traditional Oracle Infrastructure

Dear All.
Good day, I have a question related to the Oracle SOA Suite, I need to know if I can use Oracle Application Server 10g Release 2 ( the traditional version) which contains the Oracle Infrastructure & Oracle Middle tier on the same product, Business Intelligence & Forms version, to work with Oracle SOA Suite 10.1.3 Release 3, to give the authinticatio & authoraization using Oracle Internet Directory not using the Java SSO.
Is this has any effect of development the BPEL Processes or the web services? such as using specific Java containers??
can I use this OAS 10g Realease 2 to deploy the web applications (J2EE) and integrate them with BPEL processes deployed on the Oracle SOA Suite Installation??
I really need help, thank you in-advance
Adham Hattab

Hello.
When you install SOA Suite you get typically a "home" and "oc4j_soa" container. You can deploy apps into the "home" container if you wish. Technically you could also deploy into oc4j_soa, but I strongly suggest leaving it alone!
You can also do a 2nd Oracle install in a new Oracle Home to just have a J2EE server, in order to deploy web apps. Or, you can use WebSphere, Sun, or WebLogic, too. You can add a new OC4J container to your Oracle app server home. That is what we do typically - that way large apps can have their own JVM and memory, you can restart an OC4J container to "reboot" a problem app without impacting apps in other OC4J containers, etc.
You can configure OAS to use OID or any 3rd-party LDAP for authentication/authorization, including Active Directory. At our site we use OID Directory Integration and Provisioning (DIP) to import AD users/groups into OID. This way corporate users/groups/logins are all available to OID, making SSO that much more powerful, with no need to create new accounts just for OAS.
The install docs and/or MetaLink (My Oracle Support now) should have details on what versions of OAS work with OID. As I mentioned, we have Business Intel. & Forms (10.1.2) and SOA Suite (10.1.3.3) both using OID 10.1.4.0.1 (which itself is on top of OAS 10.1.2.2).
Daren

BO Enterprise 3.1 SR3 Installation with existing Oracle database

Hi,
I'm completely new to Business Objects and have been reviewing the installation & planning guides for the installation. I'm hoping to use an existing Oracle 11.2g installation as the location for the CMS / Audit. The guides don't really explain in detail the steps to do this, but say this pre-requisite must bein place prior to running the installation.
The section "Setting up an empty database for the CMS" sumarizes the tasks :-
create tablespace, schema or database
create new users/passwords for the CMS / Audit
specify correct permissions to create.modify,delete tables and to create procedures
Does anyone know of any further documentation that expands on the above to detail the steps further ?
Regards,
Brian.

Hi Brian,
Have you looked at the XI 3.1 Installation Guide for Unix? This has information specific to Oracle (page 38).
The PDF is available at:
https://websmp105.sap-ag.de/~sapidb/011000358700000560472010E/xi3-1_bip_install_unix_en.pdf
You will need an SMP login to view the PDF.
Best,
Srinivas

Fusion middleware OID cluster installation with weblogic domain

Hi,
I am trying to install/configure fusion middleware OID 11.1.1.2 cluster with two nodes.
Installed Databse, Weblogic, Ran RCU for schema creation.
I installed OID by selecting Create new Domain
selected clustered check box while installtion.
Selected OID and DIP for installation and configuration.
Create domain was sucessfull.
Deploy oracle directory server was Sucessfull.
Got Error when deploying Directory Integration platform.
Error: An internal operation has failed error in configuring DIP-00004 error in connecting to oracle internet directory server.
I thing apply patch will solve this issue.
I am able to login to weblogic
Admin Server, Node manager and manager server are in running state.
I am able launch enterprise manager.
OID1 is up.
I am not able to launch /odsm. any idea?? (tried with different browsers its the same)
I am applying patch now..hope solves the issue.
So now OID is deployed on one manager server and i have to add one more server in this cluster.
I am thinking to do basic weblogic installation on other cluster server then copy the domain from machine1 to machine2.
Not sure how to setup the other managed server with machine 2 details??
Please correct me if i followed any wrong step.
I need steps for Clustering.
Any idea please help??

when click on Next button it says "Weblogic server must already be installed".Please see if ("TypeError: unsupported operand type(s) for +: 'NoneType' and 'str'" Signaled When Creating ODI Domain On WebLogic Server [ID 1220075.1]) helps.
In this configured with EBS instance? If yes, what is the document you have followed to configure it?
Thanks,
Hussein

SAP installation with Shared Oracle Home

Hi Experts,
This is regarding the installation procedure.
I want to install another SAP Database Host DB instance on the same mount point with different SID.
In cse of MSSQL we create named instance and no need to install anothe MSSQL software (RDBMS).
Here is my scenario..DB host XXXX here one Oracle RDBMS running with /oracle/SSS as Home Directory
In oratab i provide SSN as new SID and in oraInst.doc the oracle inventory location is /oracle/SSS/oraInventory..
Now the SAP inst is asking me to login as oraSSN and start the installtion of Oracle..should i do that if i want to use Oracel RDBMS of SSS
Regards
Ajay
Edited by: Ajay Sandal on Apr 1, 2010 4:12 PM

Thanks Volker
Note is quite helpful.
But i guess we can install a system in this way.I did the below changes:
1. Ona existing Oracel Mount point /oracle/SID1 i m installing another SAP system.
2.Modified the oratab the enty there is New SID2:/oracle/SID1/102_64
Iin oraINst.doc Inventory Loc=/oracle/SID1/orainventory
3.Changed some parameters for ORASID2 user in Database server like home etc
4,When installation is saying Login using orasid2 adn install oracle i am saying Ok--mens oracle is already install"
In the next phase this is the error is am getting
===========
CJS-00030 Assertion failed: lsnrctl: Parameter dbHome has to be a valid ORACLE_HOME.
ERROR      2010-04-05 14:23:43.615
           CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: lsnrctl: Parameter dbHome has to be a valid ORACLE_HOME..
ERROR      2010-04-05 14:23:43.750 [sixxcstepexecute.cpp:984]
FCO-00011 The step StartListener with step key |NW_Java_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0|StartListener was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: lsnrctl: Parameter dbHome has to be a valid ORACLE_HOME..).
WARNING    2010-04-05 14:23:43.804 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR      2010-04-05 14:23:43.804 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
====================
Few more observations
After this step i checked for /oracel/SID2 directory but there are only these files --102_64 startdb stopdb adn network configuration files under 102_64.
Regards
Ajay

SQL 2014 cluster installation on mounting point disks error: Updating permission setting for file

Dear all,
I am attempting to install SQL 2014 fail over cluster under a physical windows 2012 R2 server which have mounting point disks.
At the finish of setup I get the following error message.
Could you please help me on this?
Thanks
The following error has occurred:
Updating permission setting for file 'E:\Sysdata!System Volume Information\.....................................' failed. The file permission setting were supposed to be set to 'D:P(A;OICI;FA;;;BA)(A;OICI;FA;;;SY)(A;OICI;FA;;;CO)(A;OICI;FA;;;S-1-5-80-3880718306-3832830129-1677859214-2598158968-1052248003)'.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: go.microsoft.com/fwlink
I am using an administrator account which have all security rights (cheched on secpol.msc mmc) needed for installation.

Hi Marco_Ben_IT,
Do not install SQL Server to the root directory of a mount point, setup fails when the root of a mounted volume is chosen for the data file directory, we must always specify
a subdirectory for all files. This has to do with how permissions are granted. If you must put files in the root of the mount point you must manually manage the ACLs/permissions. We need to create a subfolder under the root of the mount point, and install
there.
More related information:
Using Mount Points with SQL Server
http://blogs.msdn.com/b/cindygross/archive/2011/07/05/using-mount-points-with-sql-server.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Installation guide of oracle AS 10g for solaris 10

Dear all,
Anyone can send me the installation guide of Oracle Application server 10g R(2) for Sun Sparc Solaris 10. Short hands-on document will be very helpful for me to install ASAP.
Thanks,
Saqib

quick install guide:
http://download-west.oracle.com/docs/cd/B14100_14/quickinstall.1012/quickinstall/toc.htm
install guide:
http://download-west.oracle.com/docs/cd/B14100_14/install.1012/install/toc.htm

Oracle Patch Base and Parameter Maintenace for BO installations

SAP publishes a set of recommended Oracle Patches and Parameter settings for Oracle Database operation on all OLAP and OLTP systems. Do the bug patches and database parameter values recommended apply to Business Objects installations that leverage Oracle or are there different requirements for BO application installations which are configured to use an Oracle database? If so, where can I find the following information?
Alan

I would suggest to look the Support platforms documentation of your BOBJ version.
You can find this here http://service.sap.com/bosap-support
Regards,
Stratos

Problems with Cluster Ready Service installation (RAC) in Oracle 10g R1

Hello
I have got problems with this installation. I am starting Oracle user
At the end of the installation I get a mesage when all Configuration Assistants are failed
I have got 2 computers with Windows 2000 PRO, two networks (private and public)
As a shared disk I use one external disk (with USB) attached to one computer.
What to do here?
please for a reply
Martin
PROT-1: Failed to initialize ocrconfig
SCLS error 1 reading current privileges.
Internal Error Information:
Category: 1234
Operation: scls_iddb_has_privgrp_by_name
Location: NetLocalGrou
Other: get local group failed
Dep: 0
Step 1: checking status of CRS cluster
Step 2: configuring OCR repository
ignoring upgrade failure of ocr(-1)
failed to configure Oracle Cluster Registry with CLSCFG, ret 102
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Launched configuration assistant 'Oracle Notification Server Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/bin/racgons.exe add_config migi:4948'
Start output from spawned process:
End output from spawned process.
Configuration assistant "Oracle Notification Server Configuration Assistant" failed
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Launched configuration assistant 'Oracle Private Interconnect Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/bin/oifcfg.exe setif -global "public"/10.0.0.0:cluster_interconnect "public"/192.168.1.0:public'
Start output from spawned process:
PRIF-12: failed to initialize cluster support services
End output from spawned process.
Configuration assistant "Oracle Private Interconnect Configuration Assistant" failed
PRIF-12: failed to initialize cluster support services
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Error:*** Alert: Some of the configuration assistants failed. However these are optional assistants, so they are not required for the correct configuration of your system. If you want to try to run those assistants again, select the failed assistants and click the 'Retry' button. ***
User Selected: Yes/OK
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Cluster Ready Services Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/install/crssetup.config.bat'

Also you clusterware installation installs to an ORACLE_HOME.
Oracle does only make a differentiation, if it has to be clear, that you got a clusterware home and a database home.
Normally if a patch is referring to $ORACLE_HOME (and the patch can be used for clusterware & database), it just means the installation directory of the oracle software installed.
Sebastian

Oracle single instance installation with RHEL Cluster suite

Hi ,
Can anyone help regarding Oracle single instance installation with RHEL Cluster suite? I have to know what factor need to be considered for RHEL Cluster configuration for Oracle Installation. And is it certified by Oracle?
Aungshu

Does any body like to share their experience ?

Oracle 11gR2 RAC installation with DNS

Dear Guru's,
I want to configure RAC on two node cluster with DNS(For SCAN) in my testing server.
O.S: RHEL5.4(64 bit)
Oracle Version: 11gR2(11.2.0.2)
Note: Am creating nodes in VMware ESXi server.
Just I want to know whether DNS should be configure in any one of those NODES or in separate machine.
Bala :)

Hi Bala,
I want to configure my Database with & without DNS. (Will try both installation in different servers)I think, you have already received a link on very good article about Oracle RAC installation without DNS and DHCP (I mean Jeffrey Hunter's article).
There is one more about Oracle RAC installation with DNS and DHCP (http://gjilevski.com/2011/10/05/build-two-node-oracle-rac-11gr2-11-2-0-3-with-gns-dns-dhcp-and-haip/).
And want to know how it forwards the client connection if a node fails.. Can anyone update the URL for this..There are a lot of information about it:
- http://www.oracle.com/technetwork/database/features/oci/taf-10-133239.pdf
- http://docs.oracle.com/cd/E14072_01/java.112/e10589/apxracfan.htm
- http://www.oracle.com/technetwork/database/app-failover-oracle-database-11g-173323.pdf
Very good videos:
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/session/session_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/select/select_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/callback/callback_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/fan/fan_viewlet_swf.html
Hope it helps,
Best regards,
Gena

Shared cluster with multiple oracle homes

Hi All,
I got to build a shared oracle RAC cluster with multiple oracle home installation ( 10g R1 , 10g R2 , and 11g R1 & 2).
Of course the cluster ware will be version 11.2, but I wondered if there is any dependency on how I install oracle software? Do I have to start with 10g installation first? can I do 11g and then 10g?
Is there anything I should be aware of ?

I installed Oracle Application Server Enterprise which includes AS, Database, OID, Web Cache, SSO etc. and OSES on the same machine. Everything works except I think the windows version of OSES and AS need some patches so the crawler isn't working right. Everything does, however, install and run. I think Oracle develops everything in Linux (rumors of them now using Solaris) so on Linux everything should go smoother.

How can we achive active/active cluster setup with Oracle

Hi Experts,
How can we achieve active/active database setup with oracle WITHOUT USING RAC.. As far as I know it's impossible (unless I'm wrong)..
We are using Oracle 11.2.0.1 64bit on Windows 2008 server. We deployed Oracle FailSafe but that's more of an active/passive solution based on a windows cluster.
The other solution we were thinking about is to use DataGuard and replication.. two servers.. the oracle instance running on one server generating logs, and the other server receive the logs and apply them to the physical standby db.. Still, this is not a real active/active setup.
So, is it possible to run 2 servers in an active/active cluster and have the oracle database in an active/active setup or have the instance running on multiple nodes (at the same time)?
Thanks

Let me give you a brief explanation of what the situation is and you can be the judge..
My client have four databases with the smallest one being 20GB and the biggest around the 35gb (SGA 750mb to 1.4gb (Tiny by DB standards) and probably on a normal day, you can run all four of them on a decent desktop).. The DBs are used to keep track of people information. Through out the year, the databases are almost sitting idle, and by idle I mean, the odd update here and there, the odd report..etc. No hard real processing of any sort. Two days of the year (end of year) we have all the operators consolidating records and what's not and they will be pounding away entering data and updating the tables - with hourly reports that goes to 3rd parties. The client expects a 99.99 up time and availability during those 2 days.
Now, tell me, How can I justify using RAC and spending hundreds of thousands of dollars in licensing and what ever extra costs introduced by the complexity of the environment for the above scenario knowing that I don't have any real use for RAC for 363 days of the year; and we MIGHT need it for 2 days of the year? This is the dilemma we're facing.
Thanks
Edited by: rsar001 on Sep 3, 2010 9:42 AM

Oracle 10g R2 installation with ASM+RAC

Gurus,
Need some suggestuon on Oracle 10g R2 installation with ASM and RAC option.
We have found many documents on the Oracle, HP, HP-Oracle CTC and third party web sites, but nothing that is specific to this particular combination of separate
ORACLE_HOMEs, ASM and 10g RAC CRS. It is unclear for me from the documentation how this combination of ASM and 10.2g RAC may best be installed.
The high level steps i got after reading lot of docs as follows - but i am not sure whether these are correct or not. if they are correct, can any one share their experience/notes please?
1) Install CRS
2) Install RDBMS for ASM HOME - create separater oracle home for ASM instance using OUI
3) Install RDBMS for RAC Database Home - create separater oracle home for RAC database using OUI
4) Create ASM database using DBCA -
5) Use dbca to create database.

Oracle provides 'paint by numbers' tutorials called 'Oracle By Example'. (Go to OTN, check under the Training tab)
They have one for a Windows based ASM/RAC that you might want to review. Not your specific environment, but the steps will be dag-nabbed close.
I recommend walking the path (http://otn.oracle.com >> training:OBE >> Database 10g Release 1:VMWare:Installation
http://www.oracle.com/technology/obe/obe10gdb_vmware/install/racinstallwin2k/racinstallwin2k.htm

ORACLE 8i INSTALLER WITH P4 ISSUES AND TNS ERROR WITH 9i

I want to thank those that have been of help on this subject matter. Finally after 2 agonised weeks, I was able to get around the Oracle 8i installer not able to run on my Pentium 4 laptop. Also having problem logging in to 9i SQL*PLUS. I just want to reinstate that by renaming the file symcjit.dll to symcjit.old does not work automatically. I tried it on Oracle 8.1.6 and 8.1.7(Enterprise/Standard/Personal) many times. Although it did work with Oracle Personal 8.1.6 at one point in time after the system has already 9i installed. After uninstalling the 9i, the installer stopped working again. I WAS NOT SURE IF ORACLE HAS THIS ORACLE 9i DATABASE ENTERPRISE/STANDARD/PERSONAL FOR WINDOWS NT/2000/XP ON CD. THE ONE I BOUGHT IS THE 9IAS AND 9IDS (2 Boxes) WHICH WILL NOT CONFIGURE YOUR DATABASE FOR YOU.
When I was about to give up after doing some more research, then I saw the download for "Oracle9i Database Enterprise/Standard/Personal Edition for Windows NT/2000/XP". I followed the exact direction, but did everything in my directory and not DOS since I don't know the command for unzipping files in DOS. By unzipping all the files in their respective folders Disk1/Disk2/Disk3, and going to install/win32/setup.exe, the rest of the installation went smoothly, when the system prompt for the location of the next disk, just type 2 and then 3. The installation configured everything like tnsnmaes, instances, databases e.t.c. All I did was suppied the password for Sys and System.
By downloading this particular file, I was able to bypass any configuration which is a pain, but not for you DBA guys out there. THE DOCUMENTATION FOR THESE CD,s DID NOT GIVE EXACT STEP BY STEP FOR CONFIGURATION, ONLY INSTALLATION. I AM A DEVELOPER AND NOT A DBA. Orale 8i is more easy to confugure than 9i. I WAS ALSO ABLE TO INSTALL 6i, 9ids AND SQL NAVIGATOR ON TOP OF THIS 9i, AND ALL CONNECTIONS WORKED PERFECTLY BY USING SYS OR SYSTEM AND THE PASSWORD I SUPPLIED DURING INSTALLATION.
AGAIN THANKS TO EVERYBODY USING THIS FORUM. YOU GUYS ARE GREAT AND DOING A GOOD JOB HELPING OUT OTHERS. LET'S KEEP IT ROLLING!!!
Timi Jones

O yea, I used WinZip 8.1 and it created correct directory stucture - that's the whole problem

Queries on cluster installation with win2k3 & Oracle 10.2.0.4.0 for 640 rel

Similar Messages

Maybe you are looking for