Queries on Web Analysis

HI,
I have couple of queries on Web Analysis which are as follows:
1) Does the "Subset of UDA" option works for Multi-level combo box (Its not working in my report for time dimension)?
2) Is it possible to use "Keep Only" option on multiple columns at the same time (I know it works thro' 'Browse' option)?
3) Can we put a calculation in a column which gives percentage between the column total and row total?
4) Can we link two dimensions alone in two different spreadsheets on a report? (Scenario: I've two dimensions in the row & accounts (measures) dimension in the column. Two spreadsheets with same two dimensions in the rows but different accounts (measures) in the columns. User wants to drill-down the rows only on one spreadsheet and expects that this change should be reflected in the second spreadheet as well)
Thanks in advance,
Vasanth

Hi there did you get any answers to any of the following questions? In particular point 4.

Similar Messages

  • Report in Web analysis

    Hi,
    I design some report in web analysis. Is it generate any query? If yes, from where can I get the query?
    Please reply.
    Thanks.

    Reports in Web Analysis most probably generate MDX queries which are sent to Essbase to fetch the results. I've never come across to something like MDX profiler for essbase as this could have been the only way to capture those queries.
    Cheers,
    Alp

  • Creatin crucial report in web analysis

    Hi,Experts
    Here is an interesting issue.we have Actual and Forecast data.
    In generating the reports using web analysis for one crucial report.we have version number which is a memebr of version dimension.Based on the version number selected,it must show only the forecasted data and not the actuals data in the report.
    How can we show to users in the web analysis reporting. Is there any approach to do at Cube level?
    (Thing is that there should be a link between version and time)
    Clear explenation: If we select particalar version number "v1003" ,the data must be displayed in the reports from current month to next 24 months,the before actuals must not be displayed.
    Regards,
    Vardhan..

    Reports in Web Analysis most probably generate MDX queries which are sent to Essbase to fetch the results. I've never come across to something like MDX profiler for essbase as this could have been the only way to capture those queries.
    Cheers,
    Alp

  • Adhoc and web analyser

    hi,
        my question is Adhoc queries in BW-3.5x and web analyser in BI-7.0 is same? and tell me some initial steps to create Web analyser reports in WAD. and how to add print templete in that and how to attach document in reports.
    regards,
    preety

    Hello Preety
    Please refer this document  search for Print Template
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b931a890-0201-0010-268d-a7bedf8aa720
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bc4fa990-0201-0010-588e-ca4e63050d6d
    http://www.bwexpertonline.com/archive/Volume_02_(2004)/Issue_05_(May)/V2I5A1.cfm?session=
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70e18305-2356-2910-4bbe-9c1ebd751032
    Thanks
    Chandran
    Edited by: Chandran Ganesan on Feb 12, 2008 4:45 PM

  • Moving Queries to Web...   What about BOBJ

    Hi, All of our Queries are 3.5 and running in 3.5 Workbooks.  We are considering to convert all of our Queries to 7.x and running them on SAP Portal.  I just need users to be able to access their reports without a lot of additional options.
    1. Is this Portal direction a good decision based on SAP's Direction with Business Objects?
    (I don't seem to hear a lot about companies running BW Queries just through portal)
    2. What functionality or benefits would Business Objects Offer that running the queries on Web wouldn't provide?

    1. Is this Portal direction a good decision based on SAP's Direction with Business Objects?
    (I don't seem to hear a lot about companies running BW Queries just through portal)
    If you already have the licences then putting the reports on to Portal is a good idea. If you're considering going down the BOE route then it may not be worth the effort.
    2. What functionality or benefits would Business Objects Offer that running the queries on Web wouldn't provide?
    If you compare BEx to Webi, then I reckon BO would say that you get a more user-friendly interface for end users. However, Webi performance is just not as good as BEx. Also consider that BO offer the Xcelsius dashboarding tool and pixel perfect reporting via Crystal reports. So it's not a straight comparison, you can get more functions with some of the other tools.
    In your position, assuming the effort for hosting everything on the portal isn't too high, it's a worthwhile investment. I would also recommend investigating SAP BO Advanced Analysis since it's going to be the successor to BEx.

  • Web Analysis is not working

    Hi,
    I recently installed Hyperion BI+ in my server and I'm trying to do some reports in Web Analyzer.
    My installation and configuration went successfull.
    I can open FR, IR ..
    I'm trying to open WorkSpace and Web Analysis...
    both are not working...
    When Im trying to open web analysis using the below URL Im getting error..
    http://<servername>i:19000/WebAnalysis/WebAnalysis.jsp
    but when I'm using this URL http://<Servername>i:16000/WebAnalysis/WebAnalysis.jsp
    I can see the open page.. but the Web Analysis window is not coming.. I'm getting blank page...
    and for workspace also.. when I'm using 45000 port.. it is working but I cannot open any reports.. some debug error is coming..
    when I'm using the default port 19000.. Im getting network error...
    Please help me in this issue..
    Do I need to do any modifications in my configuration or property files....
    my Java application is Tomcat(default).. databases is Oracle 10G Enterprise Edition.

    Hi,
    Regarding Web Analysis- I believe- It's a problem of JRE.
    - Just remove/uninstall the JRE from your Currently installed Programs. You may want to reboot the m/c
    - Open Web Analysis Studio in the Web browser. Now, since it can't find JRE, it'll set up the relevant JRE for you & you may continue using Web Analysis.
    - Please note- Unless you've changed to a different one during configuration, Web Analysis operates on 16000 port.
    Check the following regarding Workspace-
    - Your service may be down, thus, throwing Network error
    - You may've to re-configure Workspace. Start the service & wait for few mins. before opening Workspace.
    - Natesh

  • Issue while opening the web analysis reports

    Hi,
    One of our user is not able to open a web analysis report with an error messages saying
    "Java.Lang.Exception: Unexpected HTTP status code of 500 received from server"
    "Document does not exist or no authorization to open the document"
    Other users with the same level of access are able to open the report fine and also the same user is able to access the report fine with a test id from his machine.
    What could be wrong? Any suggestions please.
    The only thing I see here, something wrong with userd ID or password.
    Thanks
    Prasad

    Hi,
    I had also faced this problem earlier. I was using HFM as data source for WA reports. After searching I found that there was some change at HFM level. Some dimensions/members had been deleted or added in HFM. And I was using those missing members in WA Grid.
    I had to recreate my reports again as I didn't get any other way to deal with this problem.
    Please shared any other alternative option, if you found while working on this issue.
    Thanks & Regards,
    Mohit Jain

  • Issue opening Web Analysis report

    I create, with buttons, links between reports in web analysis. Sometimes when I click on one of them in workspace, it doesn't open linked report, but another one. Furthermore this last one is automatically saved as the previous report, and I can't open the original linked report. Any suggestion about this ?
    Thanks in advance.

    Hi Natesh,
    Thanks for your reply to my query posted in this forum. Please find my inline answers between asterisk to your questions:
    Whatz the source of your Grid? Relational SQL Query (OR) A spreadsheet with Essbase database connection file?
    * Yes, the source is Essbase.*
    If source is Essbase, it seems- Outline might've got altered when you're trying to refresh the report.
    * The outline was in tandem when we tried running this report in WebAnalysis. This outline & WebAnalysis report which is in Dev Server is a replica of the one in Test Server where it runs fine. *
    If source is based on a Relational SQL query, chances are that- Query is no longer valid.
    * NA as this statement is NOT applicable to our source.*
    If it's Essbase, it's also likely that- It ran out of time while fetching the data from Essbase. You may try playing around with the parameters in Essbase.cfg file.
    * This might be one of the causes, but I double checked the all the tunning parameters in Essbase.cfg file in place.*
    Could you please through more observation on this issue. Let me know if any further information is needed!.
    Thanks for your time.
    Regards,
    Krishan
    Edited by: user10475612 on Nov 8, 2009 1:07 PM
    Edited by: user10475612 on Nov 8, 2009 1:09 PM
    Edited by: user10475612 on Nov 8, 2009 1:12 PM

  • Unable to open web analysis reports through workspace

    Hi,
    I am connecting web analysis with MSSQL server 2000 and generating reports. I am using essbase 9.3.1 version.
    But my problem now is that I can just open these reports from web analysis studio and cannot open them from workspace. In workspace, if I right click on the report and open it from web analysis studio it does open. But it does not open by double clicking the report in workspace. It just shows a blank report on just parts of the report.
    The issue is only there for the reports that are getting data from relational db (MSSQL server 2000). The other reports that are using the cube data are fine and opening from everywhere.
    Are there any other configuration settings involved in order to open a web analysis report(that uses relational db) from workspace?
    Thanks in advance,
    John

    Hi Atul,
    Try using the in built config checker:
    http://localhost:16000/WebAnalysis/config
    This has several tests you can perform to see what's running.

  • Regarding web analysis data export issue

    Hi all,
    Iam new to web analysis we had a issue on one of the report
    I can open the report and i can work perfectly on the report but when i export the data to excel its showing up as fallowing error
    FATAL ERROR: gui report is inccorect
    In the same application i have some other reports those are working fine and data is being exported to excel for those reports
    What might be going with that report Please let me know if you have any ideas.
    Thanks,
    Ramesh

    As report was exceding 65000 records we have modified the report by adding the pages and reduced the count of output records. So the issue was resolved.

  • Web-Analysis Get Current Day and Display

    Hello,
    I have a web-analysis report that should show the current business day.
    I thought this can be done by using a substitution variable. Are there any better ways?
    Thanks,
    metalray

    Hello -
    Yes, you will have to update the Substi Var everyday with the current day. You can do it manualy through EAS or you can try to automate the same. One way is to use maxl script an example below -
    login 'Hypadmin' '#########' on myessbaseserver;
    spool on to 'mymaxl.log';
    /* Setting the substitution variable */
    alter database appname.databasename set variable 'CurMonth' 'Aug';
    display variable all;
    spool off;
    Logout;
    Exit;
    You can call this maxl from a batch file scheduled from windows scheduled task to run every day at say for example at 1am in the morning.
    Regards

  • Error Launching Web Analysis Report from the Hyperion Workspace

    Hi Everyone
    When launching the report as a HTML from the Workspace, the output flashes briefly on screen
    The view in the content pane disappears to leave a blank screen.
    When I Select View | Refresh. The following result is returned "Web Analysis Information" -1
    I have set the report in start up preferences. And Web Analysis preferences set to open as HTML
    After logging on again the following error is shown " An attempt to open "Actual vs Budget" Failed
    Show Details displays: this.getFocusRoot() is nullor not an object
    The reports all display correctly when launched from the Web Analysis studio
    Any ideas will be greatly appreciated
    Thanks
    G
    Web Analysis Version
    Server Information
    Version: 11.1.1.0.0.724
    Class Version: Java HotSpot(TM) Server VM
    VM Version: Java HotSpot(TM) Server VM
    VM Vendor: Sun Microsystems Inc.
    Java Vendor: Sun Microsystems Inc.
    Java Version: 1.5.0_11
    OS Name: Windows 2003
    OS Version: 5.2
    Total Memory: 66519040
    Free Memory: 22975320
    Locale: English (United States)
    Client Information
    Version: 11.1.1.0.0.724
    Class Version: Java HotSpot(TM) Client VM
    VM Version: Java HotSpot(TM) Client VM
    VM Vendor: Sun Microsystems Inc.
    Java Vendor: Sun Microsystems Inc.
    Java Version: 1.5.0_12
    OS Name: Windows 2003
    OS Version: 5.2
    Total Memory: 34766848
    Free Memory: 10688504
    Locale: English (United States)

    Hi Ian,
    Thanks for the advise but I have looked into your possible solution and referred to the Web Analysis user guide. I have a number of reports and when selecting the Design for HTML option - a number of objects are valid and should be displayed in the workspace.
    After creating reports from scratch - with valid objects - the problem still persists.
    Unfortunately, I don't think this provides a solution to the problem.
    Cheers
    G

  • Performance of a report in Web Analysis??

    Hi Guys,
    •How do u improve the performance of report ?
    •In a general store 10 products are there, In that only 8 products are sold. I need a report for the products which are not sold(for 2 not sold). How can u do that report?(apart from Product normal dimension are there,we have a data warehouse for all)
    Thanks

    Hi, I agree with Gerd - there's not much tuning you can do in Web Analysis (as compared to FR).
    In looking at the query see if you can:
    - move single hierarchy members into the POV
    - have children and parent in the same row
    - arrange dimensions in inverse outline order (faster for essbase retrieves)
    - remove excessive formatting/suppression (or conditional formatting/suppression)
    - push report calculations back to the data source
    We have also found that using lots of dynamically calculated members also slows down reports, so try and limit the number of these.
    Maybe build your report up from the basic report to see which dimensions are causing the issue. Or alternatively start with your report and remove columns ;-)
    With regard to wishing to show only 2 items, you could add advanced conditional suppression to suppress rows with values.

  • Web Analysis Report Not Working in Workspace

    Hi all, I try to restate an already posted problem to see if some of you have encountered the same problem, that seems to me a BIG one:
    - all the report developed in Web Analysis Studio, which connects to Essbase 9.3.1, doesn't work in workspace, if the Database Connection Property is configured for using the user credentials specified in workspace logon.
    If I change the DB to an Essbase 7, it DOES work.
    If I change the Database Connection Properties to specify in the preference file the username and password (or to ask the user the credential on report opening) it DOES work.
    Any Hint?
    Thanks
    Giovanni Migotto

    Hi Giovanni Migotto,
    Do you import all the reports from webanalysis and delete the database connections to the reports and export it into Workspace, by the time of exporting it will asks you the database connection and the application name.
    provide those and try to run again those reports hope will work fine.
    Thanks
    Sri

  • Web Analysis functions not working in Workspace

    I am looking for a list of Web Analysis functions that are available in the Java client that will not work in the Workspace DHTML client (Version 9.3.1.0). Any guidance would be appreciated.

    There are 4 types of differences:
    - font differences, Workspace (DHTML) uses the WA Server fonts whereas WA Studio client machine fonts.
    - Service Buttons are very restricted using Workspace
    - Display: Tab selection, Splitter panels, Slider selection do not render in Workspace
    - Cannot restrict WA Tools menu in Workspace at all, where you can in the Studio.
    For exact details check out the Hyperion Web Analysis Studio User’s Guide from the Doc Library:
    http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_4.htm
    Cheers
    Iain

Maybe you are looking for