Queries regarding Boleto and Duplicata

Hi All,
I am a new member of this site.We have got a requirement for developing sap scripts for Brazil. Did anyone happen to work on Boleto and duplicata?
The standard forms available are J_1b_boleto_itau and j_1b_duplicata.
Can anyone please explain the functinality of the driver program RFFOBR_D which is for both the forms mentioned above?
Please help me out.

1)     IS OMS 10g also going out of support in July. If yes, what is latest version availableTo know about support Life cycle you could review the below document :
www.oracle.com/us/support/.../057419.pdf
Or
MOS notes :FAQ for Products in Extended Support [ID 757445.1]
Latest version : 12c
2)     Can we upgrade just repository DB (OEM DB) without upgrading OMS software (as oracle 10g is going out of support)yes
As view just to know :
http://learnwithme11g.wordpress.com/tag/upgrade-oem/
3)     Steps involved in upgrading OMS from 10g to 11g.Review this :
Master Index for Grid Control OMS and Repository Installation, Patching and Upgrade [ID 1277921.1]

Similar Messages

Few questions regarding Training and event management

Dear All,
Can you please help me with the following queries regarding Training and Event Management:
1. How to freeze a completed business event so that no changes to its record (like delete/update attendee details or event detail) is possible?
2. How to get feedback from attendee/faculty with a predefined format with rating (1-4 scale)
3. How to maintain department and category wise training man/hrs or training man/days?
Any help will be appreciated.
Regards,
Toa

Hi Toa,
1. Run report RHHISTO0 via SA38. Once the business event is flagged as "historical" no further changes can be done.
3. SM30 - T77S0 - Make the following swtiches active:
SEMIN AINST
SEMIN APART
Then when events are followed up, these training data is recorded to employee 2002 infotype. You can report on it via PT90 (for department-based selection use "Further selections")
Regards,
Dilek

Queries regarding Flash Builder and Augmented Reality.

I am Sarat from India. I'm a software engineer with working knowledge of Java, so Flash AS and OOP are understandable for me. I am working on an augmented reality project. I am quite new to Flash, Adobe Community and I've got some queries regarding Augmented Reality and Flash Builder:
1. Flash Builder 4.6 comes with a default Flex 4.6 SDK. However, Flex 4.6 SDK wasn't allowing me to compile and run some example files. So I've downloaded Flex 4.0A version from Adobe.com. Now the examples are running fine, but would there be any problem if i try deploying such projects in a website or as a desktop app? Once the code is compiled into a swf file, the flex framework used doesn't make much difference, does it?
2. Would the AR project run effectively on a website, given various internet/processor speeds worldwide? Would the effectiveness of the AR project, deployed on a website, depend on the number of triangles in the 3D models i.e. dae files? Because as per my understanding heavy models implies more time to download the flash app into the local browser from the internet and more time to render them by the papervision 3D engine right?
3. Can we develop a stand alone desktop AR app using Flash Builder? Using Adobe AIR we can, i guess. Please refer some tutorial, if possible.
4. I've seen that we can implement multiple-marker-tracking AR using vectors/arrays in AS. Would there be any performance issues depending on the size of the vectors/arrays used.
5. Can someone please mention some tips to improve performance of an AR app (desktop app and web app)?
6. What would be, approximately, the cost of FLARManager, FLARToolkit commercial versions, if you have any idea? I've gone through their website but they did not mention the costs.
7. Would applying bitmap material to the dae models pull down the web app/mobile app/desktop app performance, given some 4 to 5 dae models in the scene?
8. Is it advisable to use multiple markers with multiple dae models or single marker with Flash-based GUI option to load different models onto the same marker?
It would be very helpful for me if someone could answer my above queries.
Sarat.

#1, If it compiles then you have no issue. There's no reason at this point not to use 4.6. You should bundle a captive runtime to assure the users computer won't need to have AIR installed at all.
#2, Papervision is old. Use the Stage3D and/or a wrapper framework. As far as the generic "If I download lots of data will it take the user more time to load it", well, of course. Just don't make the loading experience painful. Entertain them while they way or find ways of displaying data sooner than later. If it's desirable on the web has more to do with the context of the app and the device displaying it. In other words, a phone user would find it easy but obviously not a desktop user.
#3, Definitely referring you to Google on that one.
#4, Size always matters, it's common sense. The more you process the harder it is. While I haven't done AR I've used the Microsoft Kinect SDK and ANE and tracking was extremely fast but limited. From what I've seen and your basic built in location and direction hardware on any mobile device you shouldn't have much trouble. Depends on what you're doing.
#5, This discussion would be way too large for a forum. You'd need to consult a firm experienced in AR development.
#6, "Applications using the commercial license do not have to provide source code, but must pay a licensing fee. Contact ARToolworks at [email protected] for more information." They will base your price on your product, there is no single price.
#7, The models could be huge and elaborate or tiny and simple which changes the answer. Consult the answer in #4. Ultimately most people are getting on fast networks with mobile and excessively fast on desktop/wifi. Size matters a lot less than 3 years ago.
#8, Depends on what you're doing. You have to explain it.

A few queries regarding the beauty that is Nokia 5...

I got this beautiful lil machine a lil over a week back. It looks lovely, and sounds even better. And even though, being a student/intern, it cost me more than my monthly salary, I am mighty pleased I got it. And despite the opposition before, it's a great hit, both at home and work.
Just a few queries regarding the usage from my experience so far, the answers to which I could not find in this forum and a few other review sites. [Apologies if I'd missed something.]
1- First, the battery. It only lasts for a little over a day on full charge. From what I'd heard and read, it looked like it should last quite a bit a more, atleast 2 full days. The phone even hung up a couple of times, while recording/playing video. Upon which I had to remove and reinsert the battery. How seriously wrong is this ?
2- How do you forcefully exit an application, if need be ? It suggests in the guide, and from the reviews I read, there's supposed to be an exit and a start button with the applications when you bring up the task manager. Where're they?
3- There's this option where you can insert a Slideshow as your Wallpaper. But when I go to it, select the desired images, [ Tried various random images, yes ]it only shows Options and Back button, when select Back, it just goes, well, back. Nothing really happens to the wallpaper. How does that work ?
4- This might seem like a petty issue, but it can be pretty annoying. Once you go to Options and tell it you are marking, e.g. in the Inbox or the File Manager, how do you mark multiple items, WITHOUT having to go to Options >Mark >Mark/Unmark for each item ? What's the point of having a seperate Marking option in the first place then, when I could just Move or Delete each item seperately anyway.
5- And last, any news on a free full version of a document viewer ? From what I looked up, it costs around US$70, which is about a quarter of the phone's purchase price itself. And that's not a modest sum, that too for a basic application such as this, for a anyone with my status.
Just so any prospective buyer or amateur user such as myself doesn't get scared off by the seemingly long list of inquiries, the phone's an absolute pleasure to use. Specially, for someone with their first Touchscreen/Symbian experience. I got this phone after a LOT of research, both online and in the field. And it's bloody well worth it so far.
I know, it's a huge post, but you'd have my utmost gratitude for an accurately detailed response. Thankyou. =)
Solved!
Go to Solution.

Why of course. Something happening to your phone during the process would brick it, not to mention that the attempt would install something in your phone that voids the warranty, meaning that you just made yourself a very expensive paperweight. ^_^. We're not really allowed to talk about it, other than the fact that with the above possibility, I strongly advise you not to do so. There is a way to do it without hacking it. I know of people who have managed to do it without hacking, but it was on the 5800. Hmm, ok, maybe they'll work for you too though.
http://forum.dailymobile.se/index.php/topic,4254.0.html
If you find my post helpful please click the green star on the left under the avatar. Thanks.

How to find the list of all queries on each and every cube in the system???

Hi All,
I need some method to get all the reports(queries)(technical name and description),run on all the infocubes in the system. The number is very huge...roughly...on each cube there are near about 40-50 reports and the number of cubes is also too high.
Is there any table or function moudle which can make this job easy and less time consuming.
Freinds I need this solution urgetly. Please rush back...
regards,
minal

Hi Minal,
RSZCOMPIC table lists queries built on the cubes.
COMPUID is an ID of the query.
RSZELTDIR table contains description of the reporting elements. DEFTP field equals REP designates queries.
Search for RSZELTDIR-ELTUID = RSZCOMPIC- COMPUID. Field MAPNAME will contain a tech name of the query and TXTLG field its description.
Best regards,
Eugene

Configuration Settings for Postal Adress Validation and Duplicate Check

Hi,
What are The Configuration settings for Postal adress validation and Duplicate Check for Accounts(BP'S) in CRM 7.0 version
Can some one send me the configuration settings for Postal Adress validation and Duplicate Check
Thanks & Regards
Kishor Kumar

Hi kishore kumar,
For the Postal code Validation you need to install and configure the following
Outside of your SAP system:
1. Install Data Services and the Address Directories.
2. Install Data Services Component.
3. Install the RFC Server.
On your SAP system:
4. Install the BAdIs from the previous version of this product.
5. Install the BAdIs support package from this version.
6. Run the post-installation tasks required of a new installation of the BAdIs.
7. Activate the IC WebClient, if desired.
Thanks
Jayakrishnan Nair

New video blog: Address Validation and Duplicate Check in IC

Hello Everyone,
Here is a short video discussing "Address Validation and Duplicate Check in the Interaction Center" for CRM 7.0 from Renee Wilhelm of SAP product management.
[http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/70e18a60-efc9-2c10-01ae-c4626f673a53]
Best regards,
John
P.S. Please share your thoughts, ideas, or concerns! Thank you.

Hi,
in the video, you say that the user (logged into the system as IC Agent), can choose to merge the BPs once identified that a duplication exists.
By the way, into SAP OSS note "1565230 - dump after merging of BPs in IC webclient" it is written that it is not supported to integrate Business partner merge functionality to IC webclient.
Here below, an extract from the Note:
Reason and Prerequisites:
It is not supported to integrate Business partner merge functionality to IC webclient. Technically after the merging of Businss partners, the buffers of business transaction will be initalized at API layer directly, instead of by Genil layer. It is not possible to synchronize the buffer to BOL layer. Once you access to the business transaction which has been initialized during the merging of Business partners, the dump will occur.
Solution:
It is required to move the functionality to the business roles for
backoffice scenario, for example, SALESPRO etc.
What do you think about? Am I missing something?
Thanks in advance and Best Regards,
Andrea

Queries regarding N:1 Mapping

Hello XI Experts,
I have gone through one the most popular weblog on N:1.
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
I have some queries regarding this...
1. In Step 3, while creating message interfaces...which message type we have to select for MI_NOM_ABS (Abstract Asynchronous)
2. In Step 4, in Message mappings...which messages we have to select as a source and target messages for all the 4 Mappings of;
MM_ISU_UKGAS_NOM1_to_NOM1_ABS
(ii) MM_ISU_UKGAS_NOM2_to_NOM2_ABS
(iii) MM_ISU_UKGAS_NOM3_to_NOM3_ABS
(iv) MM_ISU_UKGAS_NOM_to_NOM_ABS
Do the needful.
Thanks n Advance.,
Xavier

Stallin,
> Question 1
use MT_NOM
>Question 2
First 3 mappings source and target are same in Message Mapping, in case of Interface Mapping Outbound IDOC to Abstract IDOC.
4th mapping 3 IDOC's as the source , MT_NOM as the target.
If it's not clear, reply back.
raj.

Queries regarding BPM Process

Hi All
I have some queries regarding BPM.Please respond.
Can we create / modify BPM processes using any Webservices / APIs available
Is it possible to edit template used for notification mails in BPM?
Do we have any way to transform BPM process design to standards like XPDL and BPMN. ?
Thanks
Monika
Edited by: Monika Jain on Jan 5, 2010 1:42 PM
Edited by: Monika Jain on Jan 5, 2010 1:45 PM

Hi Monika,
Regarding which version ob BPM is your question for notifications?
In NW BPM 7.11, you can not edit the text of the notifications, only the link to Task and UWL is configurable.
In NW BPM 7.2, there is a new type of Notification activity, where you have the freedom to edit the text of the notification, also to add dynamic variables from process context, but for the generic notifications(like "New Tasks") the functionality is the same as in NW BPM 7.11.
Please find a link to NW BPM 7.11 documentation for configuring Notifications.
http://help.sap.com/saphelp_nwce711/helpdata/en/e4/32ff7865fa483dba3686160f5c6dd0/frameset.htm
Best regards,
Radost

Queries regarding Printing in BIP

Hi All,
I have a requirement where the reports generated in BI Publisher needs to be directly send to the printer.The BIP is integrated to an application and we use BIP only for generting the PDF and excel reports.
I am trying to understand how the printing works in BIP and have a few queries regarding them. Listed below
1) The code that invokes the print functionality, is it something that resides on the server which hosts BIP?, or is it more a client side code (application that calls BIP)?
2) Do I have explicitly set my printer properties like host name , port #..etc in the code? I saw it being done in the documentation
------------From BIP Documentation -------------------------
// set IPP printer host
req.addProperty(DeliveryPropertyDefinitions.IPP_HOST, "myhost");
// set IPP printer port
req.addProperty(DeliveryPropertyDefinitions.IPP_PORT, "631");
// set IPP printer name
req.addProperty(DeliveryPropertyDefinitions.IPP_PRINTER_NAME,
"/printers/myprinter");
3) Do we need to know the printer details of each user prior to printing?
4) If the userbase is quite large, how can we set the printer properties for each individual users?. Is this a property set for each individual user?
5) Can we extract the printer details from a client machine and send it across to BIP for it to set the property and do the printing?.
Any thoughts ideas..and answers are welcome
Thnx in advance
Xs

Hi Rajeshree,
This is a new doc management feature of SRM 5.0.
You can now create versions, lock the document for local modification (check-in/out).
This requires an applet.
You can de-activate it in SPRO.
Rgds
Christophe
PS: please reward points for helpful answers

Few queries regarding J3RFLVMOBVED Report

Hi all,
I have a few queries regarding the J3RFLVMOBVED Report.
First and most inconsequential, the report reads Stock Overview (Russia). So why Russia?
Second, there are two checkboxes in the selection selection screen namely,
Read List from Database
Save List to Database
When I run this report once, it takes about 10 mins to fetch the output. But if I select Read List from Database, I get the result in a matter of few seconds to a couple of minutes.
So obviously I would like to know the secret behind this magic trick.
Also, what does Save List to Database do? Im a little apprehensive of trying this option. Just dont understand what it means. Hence did not try it yet. Does it mean that it is saving to a buffer or to the database as suggested(which I feel is highly unlikely).
I did debug the program. But found it too much to comprehend - pardon my n00biness for that.
If anybody has looked at this report or a similar one, with the above checkboxes, please help me out.
pk
PS: Logging out for the day. Will respond to replies on the morrow.

Hi Amit,
The Documentation for this report can be found either in Tcode J3RFLVMOBVED by clicking on the Blue i button or by going to the report J_3RMOBVED and checking the documentation there.
This part of the documentation is pretty useful:
Options to keep / receive the report from a database.
If the option "Keep report in database" is active our report is kept in the databases table "INDX" with the key "IM". That report can be used operatively for the further analysis.
The storing is possible on two vevels:
on a plant level
on a company code + GL account level
In both cases storing is possible only for one period (month).
Will check out the Notes. Actually services.sap.com has problems opening in my browser. Will have to get that rectified first.
Thanks for the info.
pk
PS: Im on ECC6
Edited by: kishan P on Feb 4, 2009 4:22 PM

Few queries regarding auditing

Hi All ,
Greetings. I have some queries regarding auditing.
1.How to enable auditing for create table and truncate table by a user ?
SQL> audit table by schema_name;
Audit succeeded.Got to know the above from :http://psoug.org/reference/auditing.html
This got succeeded. But when i actually created a table , it did not reflect in the dba_audit_trail;
Do i need to use the action number from here and then combine it with some other table to obtain the create table/truncate table information ?
2. How do i check what all auditing has been enabled so far ?
Please suggest me . I am unable to track auditing for create and truncate.
Regards
Kk

In the above article that I have quoted previously it says to check the dba_audit_trail table.
COLUMN username FORMAT A10
COLUMN owner    FORMAT A10
COLUMN obj_name FORMAT A10
COLUMN extended_timestamp FORMAT A35
SELECT username,
       extended_timestamp,
       owner,
       obj_name,
       action_name
FROM   dba_audit_trail
WHERE owner = 'AUDIT_TEST'
ORDER BY timestamp;
USERNAME   EXTENDED_TIMESTAMP                  OWNER      OBJ_NAME   ACTION_NAME
AUDIT_TEST 16-FEB-2006 14:16:55.435000 +00:00 AUDIT_TEST TEST_TAB   CREATE TABLE
AUDIT_TEST 16-FEB-2006 14:16:55.514000 +00:00 AUDIT_TEST TEST_TAB   INSERT
AUDIT_TEST 16-FEB-2006 14:16:55.545000 +00:00 AUDIT_TEST TEST_TAB   UPDATE
AUDIT_TEST 16-FEB-2006 14:16:55.592000 +00:00 AUDIT_TEST TEST_TAB   SELECT
AUDIT_TEST 16-FEB-2006 14:16:55.670000 +00:00 AUDIT_TEST TEST_TAB   DELETE
AUDIT_TEST 16-FEB-2006 14:17:00.045000 +00:00 AUDIT_TEST TEST_TAB   DROP TABLE
6 rows selected.
SQL>Have you reviewed that table?
You can also review the dba_stmt_audit_opts table.
DBA_STMT_AUDIT_OPTS
Edited by: Kerri_Robberts on Jul 15, 2011 3:11 PM

Alias Tables and Duplicate tables in Physical Layer

Hi all,
I have a small doubt in physical layer. We have two options when we right click table, 'Alias' and 'Duplicate'. To create another instance of a table, can we use any one of these. Does it make any difference
Thanks & Regards,
Jagi

Hi,
If u duplicate any table the join conditions will carry with respective tables , same name appending (TableName#1)
In case of alias u need to specify joins conditions explicitly
We can use same table with different constrains to the same table
Aliases used, if you need to replicate a physical table and not create multiple tables with the same data
If you delete any column in the Original table automatically deleted in alias
table and Its not reflected in Duplicate table.
Steps:
Right Click the original table. Choose New Object and choose Alias.
The mistake most people make is try to bring in the same table again and rename it or choose Duplicate by right clicking the original table.
Thanks,
Balaa...

Few queries regarding content/web content migration

Hi All,
i have few queries regarding migration of web site and contents (from development to test )which are not clarified after reading oracle docs.
--> When we do site replication will the content be migrated (data files).
--> when we migrate content will all ED and RD etc.(all web site object type be migrated).
--> are both the step necessary for migration when we have to migrate web site.
thanks
-somesh

--> When we do site replication will the content be migrated (data files).It depends how you do it. The "Site Studio Replicator" tool will not move any content, only the site structure. The "Manage Site Replication" page can be used to migrate content with the site structure but I don't recommend it for large sites, I use separate Archiver tasks for moving content. The "Backup and Restore" page stores the entire site in a ZIP file, not advisable for large sites.
--> when we migrate content will all ED and RD etc.(all web site object type be migrated).Yes. It uses the xWebsites metadata field to identify items that belong to the site.
--> are both the step necessary for migration when we have to migrate web site.Depends how you do it, but yes, all bits are required.

Deletion of Invalid and duplicate roles

Hi,
This is regarding some function modules which are used for deleting invalid roles.These function modules are available only in CUA environment that is in Solution Manager environment only, not in ECC or other systems.Can anybody confiem which one of these function modules would be the best to delete roles of one's choice.The idea is we have identified the invalid and duplicate roles , but we need the function modules only to delete them , ie remove them from user's role profile..
The function modules are: 1) BBPU_WAP_USER_ROLE_REMOVE_LIST
                                       2) BBPU_WAP_USER_ROLE_REMOVE
                                       3) BBPU_WAP_USER_ROLE_CHANGE
Thanks & Regards,
Savitha.

I don't know what you're doing.
Try my working SSCCE example.
Just press the Reset Table button and see what happens.
import java.awt.BorderLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JDialog;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.UIManager;
import javax.swing.table.DefaultTableModel;
public class ResetTableTest {
    public static void main(String[] args) {
        try {
            UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
            JFrame frame = new JFrame();
            frame.setDefaultCloseOperation(JDialog.EXIT_ON_CLOSE);
            DefaultTableModel model = new DefaultTableModel(new String[][]{{"1", "2"}, {"3", "4"}}, new String[]{"col1", "col2"});
            model.addRow(new String[] {"5", "6"});
            JPanel panel = new JPanel(new BorderLayout());
            final JTable table = new JTable(model);
            panel.add(new JScrollPane(table), BorderLayout.CENTER);
            JButton button = new JButton("Reset Table");
            button.addActionListener(new ActionListener() {
                public void actionPerformed(ActionEvent e) {
                    table.setModel(new DefaultTableModel(new String[][]{{"1", "2"}, {"3", "4"}}, new String[]{"col1", "col2"}));
            panel.add(button, BorderLayout.SOUTH);
            frame.getContentPane().add(panel);
            frame.pack();
            frame.setVisible(true);
        } catch (Exception e) {e.printStackTrace();}
}

Queries regarding Boleto and Duplicata

Similar Messages

Maybe you are looking for