Queries related to Portal Installation

Hi All,
I have a few queries :
We hv installed EP 6.0 based on standalone Java 6.40 system.Wt is the meaning of SCS Instance no.during POrtal installation ? On wt basis does Visual Administrator takes 50004 port for its connectivity when we open irj site with port 50000? Lastly after Portal Java standalone installation two Instance services are formed in SAP MMC , what does these two mean and stand for and wt do they indicate ,secondly which is the cluster and which is the server one amongst the two.Revert to these queries at earliest as i need this info urgently.
Regards,
Saumya

SCS stands for central services of SAP NetWeaver AS Java instance, with enqueue and message service.The Central Services run on one physical machine and constitute a Java instance.
You could get a better response on an appropriate forum,I think.
You have got quite a lot of threads open .Pls close them if u r fine with replies u have recieved .It would also be nice if you could go through this
Must read</b>
Rgrds
Vineeth

Similar Messages

Queries related to Redwood Installation / Upgrade to Full version

Hi All,
We Need some help.
We have couple of question related to redwood installation, kindly help us.
We have SAP Central Process for Scheduling (Redwood 6.0.2.7) basic version installed on our Unix server.
We are now planning to migrate to the SAP CPS full version and have already procured the license. SAP added the installables at the marketplace under - Installation and upgrades - My Application components - SAP Partner products - SAP CPS Scheduler (Full) after the procurement. We have downloaded the installables now.
My questions are:
1. How do we now upgrade the Redwood OEM version to full version? Because, we had mailed to SAP with the OEM license to change it to full version, but then SAP replied to us asking us to send them the full version license. How do I get that? Does this file (register.txt) gets created once we start the installation of Redwood full version? Because we had assumed that by buying the full version license, we would just need to send the OEM license and it would be changed to a full version, but its not so. How do we go about from here. Do we do a new installation and uninstall the basic version?
2. Also, if we are to do a new installation, how do we get the register.txt file which we need to send to SAP for key generation?
We are very new to Redwood. Any pointers would be highly appreciated.
Awaiting your response.
Thanks in advance.
Warm Regards
Rajeet

SCS stands for central services of SAP NetWeaver AS Java instance, with enqueue and message service.The Central Services run on one physical machine and constitute a Java instance.
You could get a better response on an appropriate forum,I think.
You have got quite a lot of threads open .Pls close them if u r fine with replies u have recieved .It would also be nice if you could go through this
Must read</b>
Rgrds
Vineeth

Objective setting appraisal (OSA) queries related to ESS/MSS

Hello All,
I am currently working in OSA. I have few queries related to this.
My client wants to implement OSA without linking it to the SAP ESS/MSS. They have their own intranet portal which is not a part of SAP. But they are using it for applying leave etc which has been linked to SAP R/3. So they also want to use the the same portal for appraisal also.
Hence my query is whether is it possible to link OSA with their own inhouse intranet portal ? And if it is possible then how and will I be able to get all those functionalites which are available in standard ESS/MSS for OSA?
Please guide.
Regards,
Daniel

Hi Daniel
If you can call SAP Portal in your local intrenet.
In one of my clients they were using MOSS as thier frame work (SAP portal is called inside moss)
Thanks
Rajdeep

Queries Related to Adobe Form

Hi Friends,
I have some queries related to Adobe Form. Our client is willing to replicate purchase order and shopping cart scenarios from SRM to Adobe Form.
But I am not sure whether we can achieve the functionalities or not. Our client requires to know the below answers.
1. He wants to know whether any sub screen can be developed in ADOBE form or not. For example, in PO, each line item has an account determination which has multiple entries (for example each and every line item will have more than 1 account assignments). In SRM the account assignment is entered in a second (sub) screen to enter multiple values. Whether this can be done in ADOBE form or not?.
2. He wants to know whether the search help can be provided as same as ECC/SRM in ADOBE form or not. For example, when we select the vendor he does not want to bring the list of all the vendors from LFA1 table. He wants to restrict based on come condition such as company code and user should able to key in the company code to filter the vendors associated with that company code. How this can be done in ADOBE form.
3. He wants to know, what is the best approach to develop either ADOBE form or portal page. Which one is feasible to develop cost effective and time consuming. Also he wants to know the performance impact of both approaches. Finally he wants to know the merits and demerits for both approaches (ADOBE Form and portal web page development).
Friends it would be a great help to me if you can send me the answers for the following.
Thanks in Advance.
Best Regards,
Koushik

Hi
1.Which equipment category do we choose, Q or P?
Ans:
Q is normaly used for Instruments,Lab equipments
P also used for Production/process related equipments needs calibrations often
2.While creating a maintenance plan,which category do we choose, maintenance order or quality maintenance order?
Ans:
Its all depends on config you have did. if Quality maintenance order should be linked to inspection type.can be used.
we can not used maintenance order if it is not linked to inspection type 14.
3.Is it that we can't do a time confirmation before results recording?If I try to do so,I get this message"No open operation recieving confirmation entries for order".
Ans:
You can do time confirmation after result recording, then UD.after UD ,order will be TECOed automaticlay.
4.While I create my maintenance plan,I get this message, a counter could not be defined for the reference object.Why so?
Ans:
Check any measuring counters created for the equipments,
5.After usage decision,if I lock my equipment for further use,the equipment has the status both AVLB and NPRT.Why?
Ans:
After UD, system changes the status NPRT for the equipments have PRT view only.
if PRT view maintained in the equipment, system status remains AVLB.
If you dont to use the equipment after UD-Reject,have to go development using user status.
6.Can I create my calibration order manually and assign equipment task list.If so,how?
Ans:
Yes. you can
Create task list with 300 inspection point, assign when u create order
also you can have manual call in the maintenance plans.

Queries related to Bi Beans using Oracle9i JDeveloper

Queries related to Bi Beans using Oracle9i JDeveloper [5.0.581]
1. Is Asymmetric Report feature is available in Oracle
JDeveloper(BIBEANS)?
2. Is Write Back feature is available in Oracle9i JDeveloper
using BiBeans?
3. Is it possible to use HotSpots feature in Oracle9i JDeveloper
(BIBEANS) ?
4. Is it possible to use On the Fly Aggregation feature in
Oracle9i JDeveloper(BIBEANS) ? or We need to use Meterialized
Views or Summary Tables for Aggregation ?
5. Is any documents/steps available for JDeveloper Reports Web
Publishing and JDeveloper Report Integration with portal ?
6. Is any document/information available on JAVA OLAP API for
Report customization.
7. Is it possible to insert a ROW/Column dynamically in a
Report ?
10.Is it possible to generate Arabic Reports(with Numeric Data
in English and Dimesions(labels) in Arabic).pl provide some
doccuments on this topic.
11.In Formating option there are 13 types of currencies
provided.but there is no 'Rs'(Rupees) and 'Kd'(KuwaitiDinar).is
it possible to attain?
If yes,can i get any examples and related documentation
on the above features ?
Thanks for time and help
Regards
Raja

The user that owns the cubes and dimensions must have the role OLAP_USER so that the OLAP API can view the required information which is actually stored in a series of tables owned by the user OLAPSYS. This schema is usually referred to as the CWM catalog. I think the OLAP documentation explains the views that are part of this schema.
At risk of being rude - why are you creating a relational model? It is much easier to store your model within an 10g R2 Analytic Workspace. This is much more performant and provides greater functionality compared to ROLAP solution.
Watch out for Enterprise Manager (OEM) when deleting cubes and dimensions. I have had some very bad experiences with OEM not removing all the elements of a dimension or cube from the CWM catalog, even though the nodes in the OEM navigator tree do not show any dimensions or cubes.
Then when you try to connect to an OLAP schema with BI Beans you got some very serious java exception errors relating to corrupt metadata. At this point you have to use the OLAP PL/SQL packages to clean up the CWM catalog to remove all the invalid dimensions and cubes. It is not that difficult to do just takes a bit of time.
Hope this helps
Keith

Queries related to calibration inspection process

I have some queries related to calibration business process.They are as follows:-
1.Which equipment category do we choose, Q or P?
2.While creating a maintenance plan,which category do we choose, maintenance order or quality maintenance order?
3.Is it that we can't do a time confirmation before results recording?If I try to do so,I get this message"No open operation recieving confirmation entries for order".
4.While I create my maintenance plan,I get this message, a counter could not be defined for the reference object.Why so?
5.After usage decision,if I lock my equipment for further use,the equipment has the status both AVLB and NPRT.Why?
6.Can I create my calibration order manually and assign equipment task list.If so,how?
7.While creating my test equipment,for the PRT tab,the task list usage becomes a mandatory field.What setting is done for this task list usage to become a mandatory field?
Edited by: Pallavi Kakoti on Feb 2, 2012 8:19 AM

Hi
1.Which equipment category do we choose, Q or P?
Ans:
Q is normaly used for Instruments,Lab equipments
P also used for Production/process related equipments needs calibrations often
2.While creating a maintenance plan,which category do we choose, maintenance order or quality maintenance order?
Ans:
Its all depends on config you have did. if Quality maintenance order should be linked to inspection type.can be used.
we can not used maintenance order if it is not linked to inspection type 14.
3.Is it that we can't do a time confirmation before results recording?If I try to do so,I get this message"No open operation recieving confirmation entries for order".
Ans:
You can do time confirmation after result recording, then UD.after UD ,order will be TECOed automaticlay.
4.While I create my maintenance plan,I get this message, a counter could not be defined for the reference object.Why so?
Ans:
Check any measuring counters created for the equipments,
5.After usage decision,if I lock my equipment for further use,the equipment has the status both AVLB and NPRT.Why?
Ans:
After UD, system changes the status NPRT for the equipments have PRT view only.
if PRT view maintained in the equipment, system status remains AVLB.
If you dont to use the equipment after UD-Reject,have to go development using user status.
6.Can I create my calibration order manually and assign equipment task list.If so,how?
Ans:
Yes. you can
Create task list with 300 inspection point, assign when u create order
also you can have manual call in the maintenance plans.

How to run a search query for a particular folder in KM related to portal

Hi,
Can any one tell me the steps for : how to run a search query for a particular folder in knowledge management related to portal.
Answers will be rewarded.
Thanks in advance.
KN
Edited by: KN on Mar 18, 2008 6:33 AM

Ok u may not require a coding
But u req configuration
U should first make a search option set
Link: [Search Option set|http://help.sap.com/saphelp_nw04/helpdata/en/cc/f4e77ddef1244380b06fee5f8b892a/frameset.htm]
Then u need 2 duplicate a KM Command by the name Search From here
and customize it to include the Search Option that u have created
Link: [Search from here|http://help.sap.com/saphelp_nw04/helpdata/en/2a/4ff640365d8566e10000000a1550b0/frameset.htm]
Then in the layout add this command.
Regards
BP

Queries related to POWL...

Hi Experts,
I have couple of queries related to POWL:
1. Is it possible to select multiple rows in the POWL query table (Result after runnig POWL query). I am not using Web Dynpro ABAP application to call POWL but using POWL iView.
2. If above is not possible then can multiple rows be selected by pressing CTRL button and then lead select with the help of mouse. I am not able to do this as well. In one of the ECC it is working but in other it is not working. can there be any version issue.
3. By default Layout of POWL query are Link Matrix and the same can be changed to Tabstrip by going inside Personalize option, but that will only affect the particular user who have done personalization.
Is there any way to make Tabstrip Layout as default for all the users.
4. Please through some light on transaction LPD_CUST, as I want to open Web dynpro screen from POWL action. Again POWL is not embedded in Web dynpro application.
Thanks,
Harish

Thanks Manas for your response.
I have gone through one of the posts in which you have explained about this transaction LPD_CUST and that is how I have came to know about it.
Link: [Calling Web Dynpro application or URL from POWL;
but after this code is executed I am getting Null Pointer exception.
i.e. field like MR_LAUNCHER_CLASS & MR_WD_APPLICATION in INITIAL and that is why the below statement (Standard code) is giving null pointer:
ld_client_environment = mr_wd_application->get_client_environment( ).
Also just wan tto know the significance of Role and Instance (I have just taken any dummy name).
Code which I have written is below:
cl_apb_launchpad_api=>read_for_display(
        EXPORTING
          id_role                     = 'ZTESTROLE'
          id_instance                 = 'ZTESTINSTANCE'
          ir_provider                 = lr_provider
        RECEIVING
          er_launchpad                = lr_lpd_handle
       EXCEPTIONS
         parameter_missing           = 1
         not_found                   = 2
         others                      = 3
      IF sy-subrc <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CHECK lr_lpd_handle IS BOUND.
      IF lr_lpd_handle IS BOUND.
      ENDIF.
      lt_lpd_content = lr_lpd_handle->get_content( ).
      READ TABLE lt_lpd_content REFERENCE INTO lr_lpd_content WITH KEY link_text = 'TESTWEBDYNPRO'. "Link text for launchpad
ls_appl_param-key = 'SAP-WD-CONFIGID'. "app conf if any
     *ls_appl_param-value = 'MDG_OIF_CREATE_CONF'.
     *APPEND ls_appl_param TO lt_appl_param.
      lt_lpd_appl_params = lr_lpd_content->application_parameter.
      "launch application
      lr_lpd_handle->launch_application(
        id_application_id         = lr_lpd_content->application_id
        it_application_parameters = lt_lpd_appl_params
it_business_parameters = lt_appl_param
Thanks,
Harish

Queries related to iViews in EP.. :)

Hello All,
I have few queries related to iViews in EP:
1> How should I create an iView out of an EAR file thats deployed on server?
2> Do I always need a par file to create an iView?
3> Suppose I have a Web project (containing servlet). How will I create an iView from this?
Awaiting Reply.
Thanks and Warm Regards,
Ritu

Hi Ganesh,
Support the URL is http://<server>:<port/jniindex12/Test.html
The iView is ready to use but I see some strange behaviour here......
While creating the URL iView, when I fill in the URL field with the above URL string and click on Browse, I get a 503 error but when I preview the iView, it works.
Why this strange behaviour...?
Also when I run the above URL directly from browser, it runs.
So any idea as to why the error when I click on Browse.
Hope the above explanation is clear.
Awaiting Reply.
Thanks and Warm Regards,
Ritu
Message was edited by: Ritu Hunjan

Queries related to sap Basis.

Dear All
Can any body tell me queries related to sap Basis.
Which data sources need to be installed and what are the cubes and dso's which gives information related to SAP BASIS.

Hi,
It might not be installed in ur system Thats y u are unable to find.
Goto rsa1->BI Content ->Infoproviders by infoareas....There u shall find 0DBH infoarea. It is Database performance.
In my client Basis people are using some of the cubes from this infoarea.
But datasources are generic.
Hope this helps.
Regards,
Guru

Queries related to SRM 5.0

HI Guys,
I have few queries related to SRM 5.0
1. Maximum number of bidder and items can participate in single bid invitation. Is there any limitation for this same ?
2.How to submit priced and non price (Technical) bids separately using SRM system? SRM system supports both at a time. What i mean to sat that i need to open price bid of those vendor who are technically qualified not all vendor.
3.How to Implementation of PKI (Public Key Interface) and digital certification in SRM system.
Thanks in advance
Regards
Apparao.A

Hi Apparao,
About PKI doubt. For Public Key I use local vendor ActiveX control, but You can use Microsoft CAPICOM for this.
I implement PKI into Bidding Engine (auctions). That was quite big development and many standard FM's are changed.
All PKI has beenn implemented in Live Auction Cockpit, (extension in JCO connector and Veryfier class responsible for validation of PKI issuer and signer).
All information (veryfied) go to FM BBP_LA_BIZAPI_SUBMIT_BID.
I create two Z tables:
- SIG_BID (all bids signed digital certyficate, auc guids, sig guids, item guids, issuer and signer data, status of digital signed bid which include status NotValid, CertyficateRevoked, UknownIssuer, CertyficateExpired)
- PKCS_TABLE (table for PKCS keys)
When Your bid pass all validation You preform 'accepted_bid_create', if not 'rejected_bid_create'.
Maybe this short description helps You.
Regards,
Marcin Gajewski

Queries related to Oracle 9i Application server

I have some queries related to JDBC and oracle 9i Applcation
server.
1. Does JDBC Driver supporting VAX/VMS comes with the Oracle 9i
App
Server?
2. What JDBC Driver is supported for Oracle 9i Application
Server?
3. Is the JDBC Driver Platform Independent?
4. Can we separate OC4J Servlet engine(Web Container) from
Oracle 9i Application
server and put it on a different machine?
5. What other Servlet engine is compatible with Oracle 9i
Application server?
and finally ...
we are developing application with Oracle database in Sun
Solaris 2.8 OS
and after development we have planned to change the oracle
database to
VAX/VMS OS , Will there be any deployment issue because of OS
inconsistency.
Please reply me asap.It will be greatful to you.We are looking
for answers for a very long time.
Thanks
Anand

Dillip,
You can find some documentation (EJB/Servlet Developers Guide) at http://otn.oracle.com/tech/java/oc4j/content.html. We will be posting Oc4J users guide and services guide very soon.
regards
Debu Panda
Oracle

Queries related to web-ui configuration.

Hi Experts,
I have some queries related to web-ui configuration :
I have copied standard component of Lead with values Role Key = Zconfig key, Component Usage, Object Type, Object Subtype= Default and made some changes(renamed some fields) and assigned same Config key to business role further assigned that role to my user but when i open the lead transaction from webui the screen i see is standard and not which is configured by me, i have also confirmed screen by checking field property(F2) it shows my zconfig key, please clear my below queries:
1) I m missing any steps in screen configuration or assignment
2) I need to assign this new configured screen to diffrent users for diffrent project.
3) How to hide some field which is not required in transaction.
I have gone through the various threads in sdn but unfortunately i did not get clear idea.
Thanks and Regards,
DD's

Hi harshit,
Thanx for u r quick reply i have done it by making changes in DO_CONFIG_DETERMINATION, can u please suggest how to hide unwanted fields in webui transaction.
Thanks and Regards,
DD's
Edited by: DD's on May 11, 2009 11:51 AM

Enterprise Portal Installation

Dear Expert,
I am New Implementation Consultant, i dont know how to follow the correct procedure. Please provide for us INSTALLATION GUIDE AND IMPLEMENTATION NOTES, AFTER INSTALLATION CONFIGURATION STEPS, DOCUMENT LINKS.
Thanks,
Selvarajs

Hi Selvaraj,
Please check the below help file and link on Enterprise Portal installation.
http://help.sap.com/saphelp_nw04/helpdata/en/22/e082410d4cbe0fe10000000a1550b0/content.htm
http://wiki.sdn.sap.com/wiki/display/EP/PortalInstallation,ConfigurationandCustomizationTips
Hope it helps.
Regards,
Raghu

BI web queries in HR portal without federation

Is it possible to display BI queries in a portal that is not the "BI portal". My landscape is as follows.
Have 1 EP 7 HR portal running ESS
Have 1 Dual stack NW2004s system running BI ABAP, BI JAVA, and EP.
CAn you get creative and use old bex reports or url iviews or something besides federation?
Thanks
Jeremy

Hello Jeremy
This should be possible. There are three ways of displaying a BEx Web application or query in a different portal. You can call the iView directly, via application integrator, or via BEx iView.
Please have a look at the following link. It is described in detail there:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/92dceb49fd25e5e10000000a1553f7/content.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/43/92dceb49fd25e5e10000000a1553f7/content.htm</a>
Best regards
Martin Rapp

Queries related to Portal Installation

Similar Messages

Maybe you are looking for