Queries/tables for reports

How do we find what tables/columns is being used by OEM under the Performance tab (for each target).
When we click on specific target and then on Performance (after entering the userid/pwd), it displays specific information like
Host
-->Runnable processes
Average active sessions
-->Active Sessions
Instance Disk I/O
Instance Throughput
Cluster Host Load Average
Global Cache Block Access Latency
Database Throughput
Is there a way to add our own metric performance and display it along with this OEM webpage...(just curious)...
Thank you

Thank you...
Is there any documentation on the calculations behind how the underlying graphs/reports are arrived at ?
I found some information on the Average session load in one of the webminar's but couldn't find any documentation on the other metrics ...
Thank you...

Similar Messages

  • SAP Report Painter - SAP tables for report items and hierarchy

    Hello,
    can you pls. help me with an information about the list of SAP tables for Report Painter, particularly the tables where the report items/positions and report hierarchy are stored?
    for example, for the Report Writer report items and report hierarchy can be found in T8* tables.
    What are these tables for Report Painter?
    thank you in advance for any info.
    Regards,
    Jasminka
    Edited by: Jasminka Vlahovic on Dec 29, 2010 8:53 PM

    Hi  Jasminika ,
    Could you please share with me those tables names where report items  and hierarchy are saved
    Regards
    Neeraj

  • Please help to find table for report S_ALR_87013558 (budget commitment)

    Dear SAP Guru,
    How can i find the table that store the value for report S_ALR_87013558 ?
    Many thanks in advance.
    Nies

    TABLES: RPSCO_X, COIX, COIX_DATA40, RKB1X, RKB1F, RKB1D.
    PROJ, PRPS_R, ACT01, AUFK, VBAK, TCNDB, VSKOPF, IMTP, IMPR,
    TCNDBT.

  • Sliding window sanario in PTF vs Availability of recently loaded data in the staging table for reporting purpose

    Hello everybody, I am a SQL server DBA and I am planning to implement table partitioning on some of our large tables in our data warehouse. I
    am thinking to design it using the sliding window scenario. I do have one concern though; I think the staging tables we use for new data loading and for switching out the old partition are going to be non-partitioned, right?? Well, I don't have an issue with
    the second staging table that is used for switching out the old partition. My concern is on the first staging table that we use it for switch in purpose, since this table is non-partitioned and holding the new data, HOW ARE WE GOING TO USE/access THIS DATA
    FOR REPORTING PURPOSE before we switch in to our target partitioned table????? say, this staging table is holding a one month worth of data and we will be switching it at the end of the month. Correct me if I am wrong okay, one way I can think of accessing
    this non-portioned staging table is by creating views, which we don’t want to change our codes.
    Do you guys share us your thoughts, experiences???
    We really appreciate your help.

    Hi BG516,
    According to your description, you need to implement table partitioning on some of our large tables in our data warehouse, the problem is that you need the partition table only hold a month data, please correct me if I have anything misunderstanding.
    In this case, you can create non-partitioned table, import the records which age is more than one month into the new created table. Leave the records which age is less than one month on the table in your data warehouse Then you need to create job to
    copy the data from partition table into non-partitioned table at the last day of each month. In this case, the partition table only contain the data for current month. Please refer to the link below to see the details.
    http://blog.sqlauthority.com/2007/08/15/sql-server-insert-data-from-one-table-to-another-table-insert-into-select-select-into-table/
    https://msdn.microsoft.com/en-us/library/ms190268.aspx?f=255&MSPPError=-2147217396
    If this is not what you want, please provide us more information, so that we can make further analysis.
    Regards,
    Charlie Liao
    TechNet Community Support

  • Find table for report creation

    if i want to create a report, i nedd to give field name and table name to the ABAPer, which i try to find by pressing F1 in that field.But many times its structure.In this case how can i find the exact table?

    Dear Sandip,
    After double clicking on the Data element---Where -used List -tables--
    execute---suppose if the system gives you more number of tables,then here by
    reading the description of the table,try to pick or else cross check whether in that
    table for that field its storing some values.
    No need to execute each table by giving inputs.Simple give the table name and
    after going into the table click on number of entries,by this way you will be able to
    short list.
    I hope this can help you to some extent.
    Regards
    Mangal

  • DB Table for Report Painter

    Hi all,
    Can anybody please let me know in which db table the details of the Report Painter are stored?
    If I have a Transaction Code, I want to know if that transaction code is created for Report Painter or not through program not through SE93.
    I have to create a report on all Z Transaction Codes.
    Thanks in advance.

    Hi Mr.A ,
    while creating tcode for report painters we will take option PARAMETER Transaction code , so based on the transaction type u can find out from the same tables - TSTCP or TSTC.
    regards
    Prabhu

  • Dynamic query table for report based on LOV selected

    Hi,
    Need some suggestion and guidance how to dynamically query table via lov for report .
    Scenario:
    Table, TABLE_LIST, has tablename (table in DB) and filter (for where clause) column. The TABLENAME_LOVE is derived from table TABLE_LIST.
    SELECT TABLENAME D, TABLENAME R FROM TABLE_LIST
    In Page 2,a page select list item,P2_TABLENAME to use TABLENAME_LOV
    All data in tables in the table_list have identical structure (columns, triggers, primary key, and so on).
    I want to have the report region query from the table based on selected LOV.
    Example,
    Tablename Filter
    TB1
    CD2 ACTIVE='Y'
    When select TB1, the report regin will query based on TB1.
    When select CD2, the report regin will query based on CD2 WHERE ACTIVE='Y'
    Question:
    How can I query based on &P2_TABLENAME. WHERE &P2_FILTER.
    Like
    select col1, col2 from &P2_TABLENAME WHERE &P2FILTER
    Greatly appreciate any suggestion and some guidance.
    Tigerwapa

    Hi,
    You should always post your Apex version, DB version and other information as suggested in the FAQ.
    And the moment you talk report you should state whether it is IR or Classic.
    As for your query, have you explored the Report type "SQL Query (PL/SQL function body returning SQL query)" ?
    That might be a good fit for what you are trying to achieve.
    Regards,

  • Can we combine the two tables for Report Painter

    Hi,
    For making the report in Report Painter, I am not getting all the required characteristics and Key figures all in one table / Library.
    The required ones are in Table KKBC, GLT0 and CCSS.
    Is it possible to combine these tables and make a new one so that I can create the Library and can use that Library while making the report in Report Painter.
    Or is there any other work around to get the my required charcateristics and Key Figures so that I can make the report easily?
    I dont want to go through ABAP route.
    Kindly help.
    Regards
    Kami

    Thanks Bulut for your reply,
    But by going through View creation involves ABAP help, that I dont want.
    However, is it poosible to use View while creating the reports in Report Painter? I am not sure.
    I want to know whether can we create a table which is used for report painter, so that I can use for creating the Library and then the reports.
    I hope you understand my point.
    Regards
    Kami

  • Table for Reports

    Hi
    Is there any table to provide all the active BW REPORTS?
    Thanks,
    Sreenu

    Hi Sreenivas,
    Check table RSRREPDIR or RSZELTDIR.
    In RSZELTDIR --> Put A in Version and definition type of an element is REP. Run.
    In RSRREPDIR -->Enter A in version.
    You can also check this in RSA1->Meta data repository->object type Query .
    If you were looking for a list of crystal reports and not queries./transaction RSOR.
    You can also check this in RSA1->Meta data repository->object type -
    > Crystal reports.
    Table - RSRWBINDEX for crystal reports. Input workbook type as - C
    Hope it helps you,
    Best regards,
    Sunmit.

  • BCS Tables for Reports

    Hi,
    I need to develop some FM reports (using ABAP), Can anyone give me list of FM BCS tables which can be used in reporting.
    Thanks & Regards,
    Jyoti

    Hi Jyoti,
    The totals are stored in FMBDT for budget and in FMAVCT for AVC.
    The budget lines are stored in FMBDP (FMBH for headers).
    All the commitments and actuals tables are the same as were for FBS.
    Regards,
    Eli

  • Tables for Report

    I am trying to make an ABAP report where the standard price for a particular material (row) will be shown broken down into cost components (columns).
    Can you please advice from which tables should I pull the info for cost components. I have tried table KEKO and KEPH but didnu2019t find it in their. Can you please state the table and the name of the fields.
    Cost components include:
    Active, Raw, Pkg. Comp, Direct Labor, Additive Cost and Overhead

    @ Srikanth Munnaluri
    Currently the client dosen't use COPA. However it would be nice if you could explain in a bit of detail as to how COPA would solve that problem. Actually we need to make a case before the management as to how COPA would help us solve the issues we are currently facing to justify it's implementation.
    @ other experts on the forum.
    If you guys can exactly tell me what tables are needed to pick fields like Standards broken down into cost components, previous year standards and Budgeted production volume.
    Edited by: NIK83 on Feb 23, 2009 8:11 PM

  • Workflow Tables for Report

    Hi
    I need to develop a report with following information. The report should have current status. For example if 5 approvers have to approve the document then the report should show at the end all 5 approvers and the status.
    Approver name , Approval status (Approved / rejected) , Approval date (Workitem execution date).
    I looked in several tables but i dont find the approval status and approval date. Can anyone help me in finding the exact workflow table were i can find this informations.
    Thanks
    Shree

    Hi,
    Refer the below link,
    [Workflow Tables|Workflow Table;
    [Workflow User Substitution Utility|https://wiki.sdn.sap.com/wiki/x/0j0]
    [WORKFLOW TRACKING|https://wiki.sdn.sap.com/wiki/x/OIADAw ]
    [Workflow - Display users assigned to Rules|https://wiki.sdn.sap.com/wiki/x/GYGWAw ]  
    Regards,
    Surjith

  • Infosets on cProject tables for reporting

    Hello Gurus,
    I want to create an infoset based on projects and its associated tasks for crystal reporting purposes. Is there a specific table where can i get the task details and statuses to support an infoset creation? The table TJ02 has all the statuses however the table doest have any common fields to link to other tables.
    What other approaches would you suggest for this requirment?
    Thanks,
    Vinnie

    Hi
    Using SE 16 - be referring DPR* - you can get the relavant tables related to cProjects.
    DPR_TASK                             Tasks
    DPR_TSK_TYPE                    Task Type
    DPR_TSK_TYPE_T                 Texts for Task Type
    DPR_CP_STAGE_T                 Texts: Stage/Category
    DPR_PHA_TYPE                   Phase Type
    DPR_PHA_TYPE_T                 Texts for Phase Type
    DPR_PHASE                      Phase
    DPR_PRIORITY                   Priority
    DPR_PRIORITY_T                 Description of priority
    DPR_PRO_CATEG                  Project Category
    DPR_PRO_CATEG_T                Texts for Project Categories
    DPR_PRO_TYPE                   Project Type
    DPR_PRO_TYPE_C                 Project Type
    Hope this helps and you can search by referring the above table to use in the infoset.
    Regards
    PP

  • Problem using stored procedure to populate table for report

    I have a report that in one instance the user wants the quantity data pulled from a smaller subset of data. My thought was to create a global temporary table and then use a stored procedure to populate this table then pass the table name in a lexical that contains the table name. So my query in the report stays the same except for the lexical table name. This all seems to work except for the procedure populating the table. I thought it might be the global temporary table so I created a real table. When I run the procedure from the command prompt the table gets populated. When I run the procedure in the before report trigger I get nothing. When I run the procedure from the command line and leave the data, then run the report I get updated data in the table, but nothing returned to the report. Any ideas, questions, solutions?
    Thanks
    Andy Hendrickson

    Hi Andy Hendrickson,
    Let me understand your problem correctly.
    1) When you run the procedure from command prompt the table gets populated. It is clear.
    2)When you run the procedure in before report trigger you get nothing. Let us analyze why but for now it is clear.
    3) What you mean by "I run the procedure from the command line and leave the data, then run the report I get updated data in the table, but nothing returned to the report."
    Can you please explain a bit more and also update code snippets of what you are using ?
    Thanks,
    Vinod
    Oracle Reports Team

  • FI table for Report painter

    Which table I will take to create FI report in Report Painter ?
    Please help me..
    Thanks & Regards,
    Ananda

    Hi,
    If you are in ECC environment use Table FAGLFLEXT is suitable to create Library & Report Group & Report by using report painter.
    if you are in ECC but not actvation new GL / you are in up to 4.7 then use table GLT0
    regards
    Viswa

Maybe you are looking for