Queries to hussein and others

Hi people/Hussein,
I have few queries which i dont understand clearly.please correct my doubts.
1) how can find the modules/products which have got installed in my oracle applications database is there any table from where can i query?
will patchsets.sh is the correct answer or there exists some other appln tables?
we are using the oracle ebs 11.5.10.2 with the 10gr2 database integrated with it.in my workplace the modules were updated to most latest
version.
before updating the product modules i think they updated the atg tech stack version and the java and then started applying the patches on the modules.
my doubt is that is it necessary to update the atg version before upgrading the modules.what is the necessary exact reason to update the atg before updating the modules?.
and
Also, i dont understand the meaning of the terms like :PSEUDO PRODUCTS AND SHARED INSTALL PRODUCTS
What do these term actually mean and what is the difference between the terms?
and, ROLLUP / COMULATIVE / CONSOLIDATED PRODUCTS PATCHES APPLIED AS A MANDATORY PREREQUISITE --> under this heading they have given a list of products like httpd,java,txk etc for
which all they have applied patches .i dont understand how do they find that these are the products for which mandatorily they have to apply the patches.how to analyse and find these
things.
please clear my doubts
Thanks
Aram

Hi;
1) how can find the modules/products which have got installed in my oracle applications database is there any table from where can i query?
will patchsets.sh is the correct answer or there exists some other appln tables?I belive that thread(also mention by auotoconfig) answer all your question about question 1
Re: How to find Applied/Present Patches, Mini Packsand Family Packs in 11i *<<Answered by Hussein Sawwan*
we are using the oracle ebs 11.5.10.2 with the 10gr2 database integrated with it.in my workplace the modules were updated to most latest
version.
before updating the product modules i think they updated the atg tech stack version and the java and then started applying the patches on the modules.
my doubt is that is it necessary to update the atg version before upgrading the modules.what is the necessary exact reason to update the atg before updating the modules?.All related steps mention in readme part of upgrade. You need to check it.
Also, i dont understand the meaning of the terms like :PSEUDO PRODUCTS AND SHARED INSTALL PRODUCTS
What do these term actually mean and what is the difference between the terms?Check:
http://ebusinessuite.wordpress.com/2007/08/22/what-are-pseudo-products/
www.scribd.com/doc/3185983/Oracle-Apps-DBA-Topics
and, ROLLUP / COMULATIVE / CONSOLIDATED PRODUCTS PATCHES APPLIED AS A MANDATORY PREREQUISITE --> under this heading they have given a list of products like httpd,java,txk etc for
which all they have applied patches .i dont understand how do they find that these are the products for which mandatorily they have to apply the patches.how to analyse and find these
things.Oracle support make test before relase patchs, so they confirm that patch can affect which modules,screens etc. So they put related patch in patch or put as a pre-request on patch readme part
I suggest also see below notes:
Release 11i Adpatch Basics [ID 181665.1]
Oracle Applications Patching FAQ [ID 174436.1]
How to check if a certain Patch was applied to Oracle Applications instance? [ID 443761.1]
http://oracle-magic.blogspot.com/2006/12/incase-you-ever-need-it.html
Re: Appying patches when Physical standby in place.
AutoPatch modes, arguements and options
http://advait.wordpress.com/category/oracle-application-r12/
Regard
Helios

Similar Messages

  • How to find the list of all queries on each and every cube in the system???

    Hi All,
    I need some method to get all the reports(queries)(technical name and description),run on all the infocubes in the system. The number is very huge...roughly...on each cube there are near about 40-50 reports and the number of cubes is also too high.
    Is there any table or function moudle which can make this job easy and less time consuming.
    Freinds I need this solution urgetly. Please rush back...
    regards,
    minal

    Hi Minal,
    RSZCOMPIC table lists queries built on the cubes.
    COMPUID is an ID of the query.
    RSZELTDIR table contains description of the reporting elements. DEFTP field equals “REP” designates queries.
    Search for  RSZELTDIR-ELTUID = RSZCOMPIC- COMPUID. Field MAPNAME will contain a tech name of the query and TXTLG field – its description.
    Best regards,
    Eugene

  • 3 queries 3 tables and in a NON-relational DBMS

    3 queries 3 tables and in a NON-relational DBMS
    i got this msg box error:
    Error prop_id is a invalid identifier.
    basically i have querying form a non rel_dbms.
    with this statement
    select a.case_nbr, a.Aplc_id
    from Tcase a
    , tloc b
    , tla_prop c
    where c.plan_area_nbr = '1'
    and b.loc_id = a.Prop_id
    and a.Aplc_id = b.aplc_id
    thanks for responding
    here is the first
    query.
    select prop_id, plan_area_nbr
    from tla_prop
    where plan_area_nbr = '1'
    then i got a bunch of prop_id's from tla_prop that has plan_area_nbr of 1
    the second query will have
    select aplc_id, loc_id
    from tloc
    where loc_id is equal/the same prop_id from the table tla_prop
    the third selection
    will contain aplc_id from table tcase = aplc_is from the table tloc
    select case_nbr, Aplc_id
    from Tcase
    where Aplc_id = Secondselection.prop_id
    the goal is really to get the case_nbr with all criterias from query1,2,3 and table 1,2,3.
    any ideas?
    hmm, thanks in advance

    Hi
    Try this:
    select a.case_nbr, a.Aplc_id
    from Tcase a , tloc b , tla_prop c
    where c.plan_area_nbr = '1'
    and b.loc_id = c.Prop_id
    and a.Aplc_id = b.aplc_id
    Ott Karesz
    http://www.trendo-kft.hu

  • Safari and other apps are very slow

    I am frustrated because I have goodled and tried everything.  Safari and other apps on my MacBook Pro are loading very slowly.  This was not the case about a month ago.  I purchased this Macbook in October 2014 and it should not be as slow as it is.  What can I do?  I have changed a few settings and made some adjustments and the performance is still the same. Help.

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.
    When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

  • Yosemite finder crashes with previewig .txt and other files

    Hello,
    under Yosemite  the Finder crashes with previewig .txt and other files.
    Is this just my problem? Help please.
    Thank you very much.
    Regards.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Creating Queries from Cubes and ODS

    Dear Gurus:
    I'd like to learn how to make queries from ODS and CUBES.  can any Guru out there prescribe a particular infocube / ods project for me to make report on in both 3.5 and BI 7?  I can send daily reports on my progress.  I think this is the only way I will learn..  I may even have to seek help to create a simple architecture from Source DataSourc to Target Data Source to transfer Rules to InforSource to ODS to Cube and then fuill it with practice data just so that I can design a query / queries...  Can any kind BW Guru offer me his/her assistance please...  I may run out of a job if I dont learn soon...
    <b>By the way... I would like to make it known that I am starting out totally from scratch.... As in ZERO BW 3.5 and/or BI 7.0 experience nor application background in either. Hence the why I seek expert advice.Your kind support, understanding and advice will be greatly appreciated to no end!</b>

    The best way to start off is by reading the material on BW. The link below will give all the materials.
    http://www.mysapbi.blogspot.com/
    The to get hands on experience follow the scenarios in the best practices the link is below.
    http://help.sap.com/bp_biv335/BI_EN/html/Bw.htm
    And to get a tutor the best way I know is search for an institute in the following link
    www.sulekha.com
    Hope this helps.
    Bhargava

  • Convert smart quotes and other high ascii characters to HTML

    I'd like to set up Dreamweaver CS4 Mac to automatically convert smart quotes and other high ASCII characters (m-dashes, accent marks, etc.) pasted from MS Word into HTML code. Dreamweaver 8 used to do this by default, but I can't find a way to set up a similar auto-conversion in CS 4.  Is this possible?  If not, it really should be a preference option. I code a lot of HTML emails and it is very time consuming to convert every curly quote and dash.
    Thanks,
    Robert
    Digital Arts

    I too am having a related problem with Dreamweaver CS5 (running under Windows XP), having just upgraded from CS4 (which works fine for me) this week.
    In my case, I like to convert to typographic quotes etc. in my text editor, where I can use macros I've written to speed the conversion process. So my preferred method is to key in typographic letters & symbols by hand (using ALT + ASCII key codes typed in on the numeric keypad) in my text editor, and then I copy and paste my *plain* ASCII text (no formatting other than line feeds & carriage returns) into DW's DESIGN view. DW displays my high-ASCII characters just fine in DESIGN view, and writes the proper HTML code for the character into the source code (which is where I mostly work in DW).
    I've been doing it this way for years (first with GoLive, and then with DW CS4) and never encountered any problems until this week, when I upgraded to DW CS5.
    But the problem I'm having may be somewhat different than what others have complained of here.
    In my case, some high-ASCII (above 128) characters convert to HTML just fine, while others do not.
    E.g., en and em dashes in my cut-and-paste text show as such in DESIGN mode, and the right entries
        &ndash;
        &mdash;
    turn up in the source code. Same is true for the ampersand
        &amp;
    and the copyright symbol
        &copy;
    and for such foreign letters as the e with acute accent (ALT+0233)
        &eacute;
    What does NOT display or code correctly are the typographic quotes. E.g., when I paste in (or special paste; it doesn't seem to make any difference which I use for this) text with typographic double quotes (ALT+0147 for open quote mark and ALT+0148 for close quote mark), which should appear in source code as
        &ldquo;[...]&rdquo;
    DW strips out the ASCII encoding, displaying the inch marks in DESIGN mode, and putting this
        &quot;[...]&quot;
    in my source code.
    The typographic apostrophe (ALT+0146) is treated differently still. The text I copy & paste into DW should appear as
        [...]&rsquo;[...]
    in the source code, but instead I get the foot mark (both in DESIGN and CODE views):
    I've tried adjusting the various DW settings for "encoding"
        MODIFY > PAGE PROPERTIES > TITLE/ENCODING > Encoding:
    and for fonts
        EDIT > PREFERENCES > FONTS
    but switching from "Unicode (UTF-8)" to "Western European" hasn't solved the problem (probably because in my case many of the higher ASCII characters convert just fine). So I don't think it's the encoding scheme I use that's the problem.
    Whatever the problem is, it's caused me enough headaches and time lost troubleshooting that I'm planning to revert to CS4 as soon as I post this.
    Deborah

  • Free Goods Import Process with Customs, Freight, and Other Taxes.

    hi,
    I have to import free goods but have to pay for Customs, Freight, and other Taxes.
    1. If I tick Free Goods Indicator in PO Line Item, Condition Tab at line item disappears. It will not to calculate other conditions at Header level also. - So I cant execute this option.
    2. If i take price of material and insert Condition Type: R001:Discount/Quantity with material price/qty, then it gives Error Message - "Price Must be greater than 0".
    So, Is there any way through which I can procure Free Goods and can maintain conditions for Customs, Freight, and other Taxes in Purchase Order.
    Please help me in this regard.
    - Jignesh

    Hi,
    1) Create an import PO in ME21N with material price and all custom duty conditions (as you normally create). no need to put free tick indicator.
    2) Process MIRO for goods and delivery costs simultaneously.
    3) Maintain zero amount for goods item and actual values for the duties (Ensure selection of goods item including delivery cost items)
    4) Save the LIV document
    5) Check PO item history got updated with IR-L and DCIn. (IR-L will updated with zero amount)
    6) Do  MIGO w.r.t. IR document number.
    7) GR FI document will get updated with the non-set off duty values only.
    Regards
    Rajesh

  • Failed Hardware Scan and other issues E440

    Hi all,
    This is probably more rant than anything, but I wanted to give a heads up to others too.
    I have a ThinkPad E440 that is a year old. From the very first time I turned it on, there have been issues. The first hardware scan (via Lenovo Solution Center - LSC) showed a warning for the Intel Dual Band Wireless-AC 7260 Local Connection Test. There were also tons of System Events that always show up in the "Configuration History" part of the LSC. You can look at the calendar and tell exactly which days I used the computer because there will be System Events generated each day. Things like app crashes and failed drivers.
    In July 2014, I got the first warning for the 16 GB SSD - the SMART Short Self-Test. By February this year it showed as failed for each hardware scan (these were initially set up to run monthly).
    Also the whole time I've had it the touch screen would just stop working at some point and I would have to reboot to get it working again.
    I finally called Lenovo on March 30th, before my warranty expired. When I called that time, I didn't realize the hard drive failure was the SSD. So they sent me a new 500 GB drive. I also added the other things into the case when I talked to them. For the wireless issue they suggested making sure the driver was up to date. I did this and let them know when I called back that it was up to date and still having the warning. So I called them to tell them to tell them about the wireless and also that I realized it was the SSD having the failure, not the main drive. The first case had already been closed even though none of the other items were addressed.
    So they opened another case (this is #2). They said to mail them the laptop since the wireless issue would probably be on the board and it wasn't something I could fix myself. They sent a box with a prepaid overnight shipping label. I was very sick for a few days so I sent it back to them on April 10th (a Friday). Via UPS I saw it was delivered on Saturday. Work was performed on it Monday, April 13th and sent back to me that very day. I received it on April 14th. This part of the service has been excellent - very fast response.
    Being in IT, I included a letter with the laptop that outlined the issues that should have been in the case. I also printed the hardware scans and what the system events looked like.
    When I got the laptop back, the sheet inside said they had replaced the Speaker because of Distorted Sound. This was not even on the list even though I had noticed it. I didn't even power up the laptop before calling them again - yes, I was furious! Plus our power was out...
    So this was noon on the 14th. They opened case #3 and sent me ANOTHER BOX so I could send it back.
    After our power came back on the 15th, I powered up my laptop. I opened the browser (I have it set to restore the previous session) and there was a sexually explicit video on YouTube. I opened the other browser and there was a different video on YouTube. So this person was watching YouTube instead of fixing my laptop. I looked through both browser histories and there was quite a bit of activity while my laptop was at the repair center... I ran the hardware scan - still failed and a warning for the wireless. They really hadn't done anything.
    I also found two pictures of the repair person in the recycle bin...
    So I called back. I was LIVID! They opened another case (this is #4). And sent me ANOTHER BOX. I finally learned the other day that once a case is opened, it cannot be edited or added to at all. Instead, they close the other case and open a new one. I guess their turnaround time for closing cases is excellent! I've never seen a system like that - and I've used a lot of them.
    I got a really nice, patient fellow on the line. He took all my info (again). I emailed him the pictures, screen captures of the YouTube videos, the letter I had sent - everything. He entered as much into the new case as he could - he talked to one of the supervisors to make sure he did it right. Somehow he flagged it so that the laptop would get more attention (time) at the repair facility. He also opened a separate case (an escalation ticket?) for a supervisor to call me regarding the person's conduct at the repair facility. He said they would call me that day. (It's now the 25th and I've never heard from anyone)
    So, he sent me ANOTHER BOX. I've built up quite a stack of them.
    Our power was out AGAIN from the 17th through the 19th (don't get me started).
    I noticed a hardware scan had now gotten a failure on the main hard drive. So I called them on the 21st to add this to the case before sending the laptop back. The girl said they can't add anything to an existing case or edit it at all once it's opened. She would have to open a new case and SEND ME ANOTHER BOX. I told her to forget it because I was ready to send it in and didn't want to wait for another box. I also asked for a status on that "escalation case" where the supervisor was supposed to call me. In order to do this she, yes, wait for it, had to open ANOTHER CASE!! So they would know I wanted a status. I'm completely dumbfounded.
    So I sent it back on the 21st. This time I practically wiped it. I had already removed all my files the last time, but I had left my bookmarks and browser history intact.  I set up a guest logon with admin privileges. I updated my letter and printed off more stuff to include with the box. On one sheet I had only the case number, the serial number and machine type. On another sheet I had "DO NOT SEPARATE THIS PAPERWORK FROM THE LAPTOP" and the case number. I put this sheet on top (The guy on the 15th said my letter and stuff may have gotten separated from the laptop once it was delivered to the repair facility). I used a ton of staples so it would all stay together. I included in my letter the failure on the main hard drive and asked if they could look at it. I wrote about having to open a new case if I wanted to include it.
    They received it on the 22nd. A nice gentleman from the repair facility called me that day asking about the password. that. was. written. on the sheet they have you fill out. I told him what happened last time and also mentioned the hard drive failure and asked if he could look into it. He said they would.
    I received my laptop back yesterday morning.The sheet that came with it said they had "replaced the following parts to complete the repair of your laptop."
    Part Description                                           Symptom
    IMAGE                                                             Replaced due to engineering change
    System board                                                 Network card error
    Hard disk drive                                                Network card error
    ECA-WIRELESS                                            <no symptom listed>
    There was also a sheet saying they had installed a factory preload of software and I needed to install Lenovo and Windows updates.
    When I booted it up, the first thing I noticed, in the lower right corner was:
    Windows 8.1
    SecureBoot isn’t configured correctly
    Build 9600
    I ran a hardware scan. Well, I tried. It stopped part way through and said it finished successfully but most of the tasks showed up as cancelled. I tried to run it again - issues - rebooting ensued. It said the LSC wasn’t available and that I should try again or reboot.
    Tried several times. Then got what I guess is the new BSOD - kinder, gentler:
    Your PC ran into a problem and needs to restart. We're just
    collecting some error info, and then we'll restart for you. (xx% complete)
    If you'd like to know more, you can search online later for this error: DRIVER_CORRUPTED_EXPOOL
    Even though the LSC said my Lenovo files were all up to date, I ran the Update. And first I had to download a new version of Update. Then I downloaded all of the Lenovo updates and installed them (there were quite a few). The BIOS update failed. While I was doing the Lenovo downloads, I got a light blue screen but no text (I was out of the room so I'm not sure what happened). Did CTRL-ALT-DEL and it shows only IE and Task Manager as applications that are running. Could not “Switch to” IE. Hitting window key to go to start didn't do anything. So I had to restart.
    By 3pm yesterday there were 34 system events in the configuration history.
    I ran the hardware scan again after I updated the Lenovo files, and you guessed it! Failure on the SSD (SMART Short Self-Test) and warning on the wireless. Nothing had changed. Except hardware scan is acting different than it did before I sent in the laptop for repairs. When it finishes, it instantly closes and just shows 100% complete. When I click on "see last results" it shows a screen called
    Log Information,
    Canceled 04/24/2015 n:nn pm 
    You have not done a hardware test on your computer
    And the calendar in LSC only shows the very first hardware scan I did on Friday. Even the hardware scan screen shows the date and time of the last scan. It also shows the error code. In order to see exactly what is failing, I have to sit there and watch it very closely and snap a picture of the screen as soon as the error (or warning) shows up.
    When I would try to run Windows update, it would hang up PC Settings. I couldn't even kill it using task manager because it didn't show up as a task. During this, I got a flag saying the firewall wasn't turned on. I tried to turn it on, but clicking on Turn on Windows Firewall didn't do anything. I tried to setup my Microsoft account but that just hung too.
    I ended up running Windows Update FOUR TIMES to get all the updates installed. Every time I ran it, it said "Done!" and I would run it again and more would show up. The last time was this morning.
    At some point, the error about SecureBoot went away.
    Then, I created a bootable BIOS update disk. Following the ReadMe instructions, I went through ThinkPad Setup and verified several values. Of note:
    Secure Boot was DISABLED. According to the ReadMe file, this should be ENABLED in Windows 8.1. I enabled it.
    Under Startup/Boot, according to the ReadMe that came with the BIOS update, UEFI/Legacy Boot is supposed to be set at UEFI Only for Windows 8.1. Mine was set to "Both". I changed it.
    In Startup, OS Optimized Defaults was DISABLED, even though it says right there (and in the BIOS update ReadMe) it should be ENABLED to meet Microsoft Windows 8 Certification Requirement.
    After these updates, I flashed the new BIOS.
    Then, I ran hardware scan again...
    Now I have TWO failures on the SSD: Random Seek Test and SMART Short Self-Test. Great.
    In the Event Viewer (that I recently discovered), it says my disk has a bad block. It just says The device, \Device\Harddisk\DR1, has a bad block. I assume this is the SSD...
    There are 867 events in the event viewer - Critical, Error, and Warning...
    Fifty-two of these are from October 7, 2013 - before my little laptop was a glimmer.
    The rest are from when Lenovo had it and yesterday and today.
    64 of them are the disk error.
    341 are from DeviceSetupManager. 65 of those are from failed driver installs. 69 are for not being able to establish a connection to the windows update service. 64 are from not being able to establish a connection to the Windows Metadata and Internet Services (WMIS).
    3 times it's rebooted without cleanly shutting down
    60 of them are from Service Control Manager and say The TDKLIB service failed to start due to the following error: The system cannot find the file specified.
    One of them says {Registry Hive Recovered} Registry hive (file): '\??\C:\Users\Default\NTUSER.DAT' was corrupted and it has been recovered. Some data might have been lost.
    16 are warnings that various processors in Group 0 are being limited by system firmware.
    12 say the certificate for local system with thumbprint <bunch of hex numbers> is about to expire or already expired.
    108 are warnings for failure to load the driver \Driver\WUDFRd for various devices
    16 are application errors
    One is for the computer rebooting from a "bug check"
    15 are for name resolutions timing out after none of the configured DNS servers responded.
    10 are for SecureBoot being disabled.
    14 for services terminating unexpectedly
    15 are for WLAN Extensibility Module has stopped
    61 are for applications not being able to be restarted because the application SID does not match Conductor SID
    12 are for activation of CLSID timing out waiting for the service wuauserv to stop
    So, I'll call them on Monday and open. a. new. case (#5?) - but really 7. And get A NEW BOX.
    I'll keep you updated!

    Hi amycdero and welcome to the HP Forum,
    I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
    In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
    This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
    I hope this information is helpful. Please let me know.
    Thank you,
    I worked on behalf of HP.

  • After updating to Firefox 7.0.1, menu bar for Google,yahoo, Facebook (message,notification,profile,home) and others site are disabled. How can solve this problem?

    after updating to Firefox 7.0.1, menu bar for Google(web ,image,video,map etc),yahoo, Facebook (message,notification,profile,home) and others site are disabled. even I cant log out from different sites cz the log out bar is completely disabled. I tried with Firefox 4;5 and 6, same problem exist . I tried by active all add ons for facebook, same problem exist. If I use internet explorer , I don't find such problem with it.
    How can I solve this problem?

    Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
    BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
    Thanks for your help; hope this wasn't extremely long.

  • Why did my index.htm file generate blank? and other weirdness.

    Here's the story. Maybe someone can tell me where I made my mistake, or what happened. I'm numbering the steps for convenience in discussing this.
    1) I started a new project, a WebHelp project.
    2) I imported content in Word.
    3) I created an index, glossary, and TOC. I used wizards for some of this.
    4) I created a style sheet and applied it to all the topics.
    5) I added a skin from the gallery.
    6) I generated output.
    Then I sent that output to the UI developer on my project. He plugged it in to the web app, and it seemed to work fine. So then:
    7) I opened the project, edited the text, and removed glossary links (because I didn't like how they were working) individually.
    8) I generated a new TOC to match the changed topic structure (minor changes).
    9) I generated another output.
    I sent that output to the UI developer and he said it was blank. I opened index.htm and sure enough, it was indeed blank. In fact, it was Zero KB. I also noticed that four other files were blank: whfform.htm, whform.js, whskin_plist.htm, and whtbar.js.
    So then I decided to start over. I created a new project, imported just the html topic files from the old project, redid the index (in a  hasty and less thorough manner), decided to bail on the glossary for now, did a TOC and sent that to the developer.
    Now the Search pane is totally wonky, showing a list of characters and terms.
    So I am getting frustrated. The developer has tried monkeying around with stuff on his end, but it's not working. So he says, why don't you send me a build with everything?
    The problem is, I have two broken builds. The first one, which for whatever reason has the blank index.htm file (and other blank files), and the second one, which has no glossary, a messy index, and a screwed up search.
    I can't seem to find anyone else having this problem. :-/  Can someone help? 
    Thanks so much,
    Tamarleigh

    I am having the exact same problem, and I think I've figured out what is happening here. There is an issue when mapping Word styles into RH. The person who setup our Word template included a sidehead with conditional text to hide instructor notes when printing participant training manuals. I removed the conditional text, and everything is working fine. You may want to double check to make sure you don't have conditional text in your Word docs. I've uploaded an image with the code below to show how the conditional text looked when the document was linked and generated.
    Check out the code below:
    <table cellspacing="0">
              <tr>
                        <td style="vertical-align: top; padding-left: 0px; padding-top: 0px;
                                   padding-right: 0px; padding-bottom: 0px;" height="800" width="114"><table
                                   cellspacing="0" width="100%">
                                  <tr>
                                            <td style="padding-left: 0px; padding-top: 0px; padding-right: 0px;
                                                       padding-bottom: 0px;"><div v:shape="Text_x0020_Box_x0020_146"
                                                                                                                             class="shape" style="padding: 3.6pt 7.2pt 3.6pt 7.2pt;">
                                                      <p class="WD_InstructorNotesHeading"><span style="background: #ffff00;">Instructor
                                                       Notes:</span></p>
                                                      <p class="WD_InstructorNotesText"><span style="background: #ffff00;">Add
                                                       any additional instructor information into this text
                                                       box.&#160;&#160;It will only appear when hidden text
                                                       is turned on.</span></p>
                                                      <p class="WD_InstructorNotesText">&#160;</p>
                                            </div></td>
                                  </tr>
                        </table>
                        &#160;</td>
              </tr>
    </table>
    Cheers.

  • App Store, Pages 5.0, Evernote, and other Apps will not fully function after installing Mavericks. What is the issue and how can this be solved?

    Hello all, I could use some serious help on some major issues I have been having after installing Mavericks on my system (specs stated below). Never has a mac felt ever so rebelious and broken before in my lifelong period of using these systems. Anyway, after installing system 10.9, I had opened the mac App Store upon seeing that applications such as my iWork suite all had free updates. However, when I would attempt to navigate to the updates window, it would not respond to my various attempts. I then tried to get there by the system's menu bar and to my dismay, nothing would work when I clicked on it, not even the apple logo menu. I later quit the application using Command-Q and opened up the App Store by the apple menu option 'Software Update...' instead. Though it looked promising since the updates window did open, all update buttons or even '...more' info buttons were unresponsive.  These same problems persisted even after restarting my computer. I had also attempted to see if repairing definitions would help by booting from the recovery start-disk and using disk utility but the repairs it carried out apparently had nothing to do with my issue. Finally, I was able to update to the new iWorks suite (which interestingly did not replace the iWorks '09 suite) by following the notification that asked about allowing automatic updates which I did.
    Once trying to use Pages 5.0, I soon noticed that all I could do was merely type in a new document and change various options via key commands. Neither the inspector or top bar menus would respond to any place I click. Similarly, Evernote only starts up on the last used note and merely allows me to scroll through it. The top bar menus, the note select pane, and even clicking inside the note to input text are all not functioning and uninfluenced by any mouse clicks.
    I have noticed other apps that will not respond to any sort of input, but I still have not explored all applications to know what the issues of each may be. However there are some applications that work such as Safari, Google Chrome, dolphin, iWork '09 including Pages '09, and others.
    I do hope that I can avoid rolling back my system, but in the meantime, it has been quite the obticle course to use my computer for all of my school purposes.
    Any help is very much appreciated,
    Thank you!
    DT
    MacBook Pro 13-inch, Mid 2009
    Processor  2.26 GHz Intel Core 2 Duo
    Memory  4 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce 9400M 256 MB

    I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
    DT

  • How do I transfer my MacBook Air to my wife so she can sync her iTunes account and other settings with her iPad Mini?

    How do I transfer my MacBook Air to my wife so she can sync her iTunes account and other settings with her iPad Mini?

    You can change the account shortname to whatever you wish to use.
    As you can see from my example above. Once you click on the Create User button a new account will be created.
    She will need to get her own Apple ID setup so when she starts with iTunes she can open her own iTunes account unless you both want to share the use of the same Apple ID. This can create a bit of confusion if you have your own iPads or iPhones or iPods. As you have discovered it's pretty much one iDevice with one Apple ID.
    As for the iTunes library that becomes a more complicated issue.

  • (ios5 ipad bugs)I can't get changes of album art, artist, album and other tags to show up in the iPad music player, but they show up correctly in the iTunes device view. Certain random songs do not sync correctly.   Wifi sync hasn't worked yet.

    (ios5 ipad bugs)I can't get changes of album art, artist, album and other tags to show up in the iPad music player, but they show up correctly in the iTunes device view. Certain random songs do not sync correctly.   Wifi sync hasn't worked yet.
    I mostly use technology for education and professional audiovisuals and lights.
    I don't sync  music because I use music from at least 4 different computers. (manually mange music)
    I use my iPad to play performance tracks for church and a local gospel group out of our church, Won4Christ.
    I chose to buy the iPad because the laptop of one of the group members (dellxps running iTunes) was randomly losing and mixing up music and I wanted a more stable option that was bigger than my iPod touch.
    I tried to add some data to music libraries that I previously added to my iPad, but the data only shows up when looking at the device in iTunes.
    Wifi sync has not worked on either my laptop or desktop ( both running windows 7 enterprise 64 and newest iTunes) not really a big issue, but very annoying
    When browsing through library playlist albums on the iPad, random artwork shows up on playlists with no artwork that you touch while dragging, and it does not go away until you change to another navigation tab and back.
    Random songs out of hundreds that I added showed up in iTunes grayed out with a sync circle beside them.  Those songs would play back okay on the iPad but were unplayable through the iTunes device view.  I had to delete the songs manually through the library along with the playlist and add them again. 
    These seem to be major stability bugs in the "new" music app and iTunes.  My only option right now seems to be to delete the songs that I want to change and re-add them with the changes already applied rather than changing the id3 tags and artwork on the existing music. I hope apple will release updates to resolve these issues. 
    Thank you for actually making it to the end of this manuscript of annoyances.

    Just wondered if anyone had any other suggestions.

  • HT1657 When I try to rent a movie from iTunes on my Apple TV it says the purchase could not be completed. My password is correct as well as my location and other information. What is the problem?

    When I try to rent a movie on my Apple TV it states that the purchase could not be completed. My password is correct and location, user id, and other settings are correct. What is the problem?

    If you are also getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users here on these user-to-user forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Maybe you are looking for