Queriws not included for reports

Hi all, after my migration the queries are not included in the migration and thus i can't run the reports. Can someone please help me in this regard.
Thanks in Advance,
Melvin

Melvin,
Can you provide more information? For example, what's a migration?
Scott

Similar Messages

Licence is not included for the material - J1IH

Hi All
We are working on ECC 6.0.
While doing J1IH ( Additional Excise) with Subtransaction Type 01, we are getting a warning message as -
Licence is not included for the material
Message no. 8I993
However if we process without any Subtransaction Type, no warning is flashed.
Please let me know the reason for the same and what could be done so that system doesnt prompt it?
Regards
Kapil

Hi
Check SAP note 1223591
Regards
Antony

Licence is not included for the material

Hi,
I have maintained account ddetermination for DIEX ETT for sub transaction type 22. When I am doing Additional Excise in J1IH system is giving the warning message as "Licence is not included for the material" and it is not picking any G/L accounts. Where as without subtransaction , it is picking concerned G/L accounts. Please suggest, what I have to do?
Regards,

Hi
Check SAP note 1223591
Regards
Antony

Loaded data not visible for Reporting?

Hi all,
In the info cube, the data is not visible for reporting, How can i make it available for reporting,
When i select the Manage option from the context menu of the cube and select the Requests Tab, i get a pop up message that tells
" There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoCube/ODS object that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000018049, number REQU_F4ZBFRMDGBULE9WCUN3R5UX5X."
How do i find out the inconsistancies?
PS: All the requesta are delta upload
Thanks n regards
Girikumar

Hi Girikumar
Use the RSRV transaction and check the inconsistency of the cube ..If any inconsistency is there repair that with the repari option in the toolbar..
Let me knwo if it not resolved..
Bye
Shu Moh..

How to make data loaded into cube NOT ready for reporting

Hi Gurus: Is there a way by which data loaded into cube, can be made NOT available for reporting.
Please suggest. <removed>
Thanks

See, by default a request that has been loaded to a cube will be available for reporting. Bow if you have an aggregate, the system needs this new request to be rolled up to the aggregate as well, before it is available for reporting...reason? Becasue we just write queries for the cube, and not for the aggregate, so you only know if a query will hit a particular aggregate at its runtime. Which means that if a query gets data from the aggregate or the cube, it should ultimately get the same data in both the cases. Now if a request is added to the cube, but not to the aggregate, then there will be different data in both these objects. The system takes the safer route of not making the 'unrolled' up data visible at all, rather than having inconsistent data.
Hope this helps...

I am not included for tax exempt for iOS developer program

Hi,
I am not included for tax exempt . but checked the tax exempt check box unknowingly during ios developer enrollment process of 99$.and completed the purchase .
Now can I apply for excluding tax exepmt by unchecking .As I cant provide the SSN for app sale..Can some one help me on this.
Thank you

This is being caused by using the same Apple ID for iMessage. To fix this you have two choices:
On all but one of the phones go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID. Note: you can still share the same ID for purchasing in Settings>iTunes & App Stores; or
On all of the phones go to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at".

Request in cube is not avilable for reporting, how to trace this in chain?

Hello,
We have cube that gets the delta daily.
Some day, some body did full load and its failed.
Regular process chain delta load were sucessfull but they never turned reportable since the previous full load was failed.
Since we have not received any failure notification.
Is there way we can find if the request is not reportable to get notification>?
I have checked the avilable process types, it looks like we need to build custom process type.
Please advice.
Cheers
Angelo

Hi Angelo,
If the full update is run via a process chain then you can configure for that chain that if the load fails you get an email notification,
in the setup of the email notificaton you could make a reference to the target cube and then at least you know that if you don't fix this issue subsequent requests will not be available for reporting in the cube.
Best Regards,
Des

PIR not included for MRP

hello,
while creating the PIR for the material after making user settings, system is displaying the message "planned independent requirement not included in MRP".
Regards,
Sarfaraz
Edited by: sarfaraz lodhi on Dec 18, 2008 1:15 PM

Hi,
Check in User Parameter.Check Box for Version Active is not tick or inactive.That's why system will not consider it for MRP.
In that case you have to activate that inactive version either manually in MD61 or by MS64 (Copy version)
Regards,
Dhaval

Parked invoices not includes in report

Hi
Object: ABAP program ZCAMU_INV_DOWNLOAD
That program downloads invoices created during a month
Problem: Program downloads only invoices created from transaction MIGO (Invoice Creation) or MR8M (Invoice Cancellation). If an invoice has been created from MIR7 (Park Invoice), it is not included, and it should be.
Request: include data from transaction MIR7 (Park Invoice)
rgds
Arjun

Hi,
probably the SELECT contains a filter on field FKART of VBRK table.
Bye
Andrea
Rewards if it helps

GN_INVOICE_CREATE - Creates Invoice but not visible (for Report RVAFSS00 )

Hi,
I am running GN_INVOICE_CREATE using SE37. I have supplied the data and stepped through the code. At the end of the execution - I get a successful message stating that the "Document 9000007 is saved". If I go into VF03 and try to bring up Billing document 9000007 - I get the error message "Billing document 9000007 does not exist."
I am not sure if i am supplying all of the input parameters correctly to make sure that the transaction is committed. I cannot find enough documentation about GN_INVOICE_CREATE parameters. The only information I did find for the input is under the Billing (SD-BIL)->Billing->The General Billing Interface->Function Module Parameter at http://help.sap.com/saphelp_46c/helpdata/en/dd/5615db545a11d1a7020000e829fd11/content.htm and http://help.sap.com/saphelp_46c/helpdata/en/dd/5615b4545a11d1a7020000e829fd11/content.htm . But that does not describes all of the input parameters like (VBSK_I, WITH_POSTING, CALLER_TYPE, I_WITHOUT_REFRESH, ID_NO_ENQUEUE, ID_KVORG, ID_NO_DIALOG, ID_NEW_CANCELLATION)
Do I need to create a wrapper RFC and call a BAPI_COMMIT_WORK as in BAPI_SALESORDER_CREATEFROMDAT2? Or am i passing the parameters incorrectly:
Here is what I am passing in SE 37:
DELIVERY_DATE =                   08/14/2006
INVOICE_DATE =                     08/14/2006
INVOICE_TYPE =                     FX
PRICING_DATE
VBSK_I
WITH_POSTING =                     A
CALLER_TYPE
I_WITHOUT_REFRESH =                X
ID_NO_ENQUEUE
ID_KVORG =                         06
ID_NO_DIALOG =                     X
ID_NEW_CANCELLATION
The XKOMFKGN and XKOMFKKO tables I believe are correct based on the Communication Structure help files.
Any help in figuring this out is appreciated. Also, if you can let me know what the following field inputs are -VBSK_I, WITH_POSTING, CALLER_TYPE, I_WITHOUT_REFRESH, ID_NO_ENQUEUE, ID_KVORG, ID_NO_DIALOG, ID_NEW_CANCELLATION.
The reason I am going through this RFC is that we are looking at using Report RVAFSS00 to import a file that then runs the GN_INVOICE_CREATE to create billing documents with external transactions as defined in the General Billing interface.
Regards,
Jay

Did not find the documentation for the fm any where, i think best place to look for is OSS.
Parameter: ID_NO_DIALOG is for suppressing some shipping related screen and ID_NO_ENQUEUE is for locking sales order or delivery doc.
By using where used list of the function module, some times it's possible to find out the use of other parameters.
Hope this helps.
Regards
Sridhar

17, Yes. 17 items in Skype Desktop's Right Click Menu but not one for REPORT

Thank you for the post. There are literally SEVENTEEN options in the menu when you right click on a Recent Contact but Skype (Microsoft really, and my recent former employer, in the interest of full disclosure), is spammers best friend as it hides the REPORT ABUSE option inside the BLOCK option making people have to hunt for answers. Every new release of Skype under Microsoft has seen the quality of the audio/video get better (maybe because our laptops and bandwidth ar so much better anyway than a few years ago) but the UI and UX have goten worse and worse. And to this day anyone can associate your email address with any Skype ID you did NOT create, and even in 2015 Skype does not send a validation email and just associates [e-mail removed for privacy and security] to Tom, **bleep**, Harry, Scammer, Spammer, Jerk, and any user ID you would not want to be associated with. Shame. Imranhttp://blog.imran.com

Jatra wrote: <item label="Libre Office">
<item label="Libre Office" icon=/usr/share/icons/gnome/16x16/apps/libreoffice-main.png
<action name="Execute">
<command>libreoffice</command>
</action>
</item>
There are two <item label="Libre Office"> lines and the second one doesn't have the terminating '>' character ...

Filters not working for reporting

When I go to Measures: Blood Glucose and choose Charts a Chart containing all measurements comes up. I can go to print and all measurements show up in the report.
If I choose any filter and go to reports the report shows up without any data in it. An example is if I choose to filter out everything but Fasting. A report will be generated that has a title of Fasting but no data appears. The same happens
if I filter out any other selection.
I am using Chrome as my browser. I tried Internet Explorer and got the same results.
Whats up?

Hello,
I understand that you are having issues viewing BG charts when using filters and I am happy to assist you. Can you please tell me what you see when you select the List View instead of the Chart View? That will show the filter terms you applied
to each measurement and is found under the Measurement Context Column. For example if you have half of your measurements listed as after lunch and half of them listed as after dinner then when you apply the after dinner filter in Chart View, you
will only see those that have the Measurement Context of after dinner.
If you are still having issues, please let me know and I will investigate further
Thanks
Tomas
MS HealthVault Support

Data Not Populating for report

Hi,
i am using Oracle BI Applications 7.9.6, i just loaded few sample data using universal adaptor. In "Financials GL - Budget and Expenses" subject area, there are two facts: Facts-Budget, Facts-Actuals.
I could get the data with dimensions across these two fact columns independently like "one column from company dimension + one measure from Facts-Budget" and "one column from cost center dimension + one measure from Facts-Actuals", but when i apply the report with "one column from company dimension + one column from Facts-Budget + one column from Facts-Actuals", i am unable to get any data. I have checked the physical tables if data was coming and row counts are fine. Please suggest me on what should i check on.
Thanks,
Sreekanth.

Hi
could you please provide the error you are getting while running the report other way you can go through below mentioned link
OBIEE: Incorrectly defined logical table source doesn't contain mapping
i hope this will help you..
thanks & regards

Why is Canada not included for skype numbers?

Are we supposed to expect to get Canada Based skype numbers?

Are we supposed to expect to get Canada Based skype numbers?

Request for reporting available after rollup. Why not before?

Hi,
In infocubes with aggregates, a dataload is not available for reporting until you roll-up the aggregates. This is very unwanted behaviour and we'd like to have the loads available at all times, with or without a rolled up aggregate. All our aggregates are rolled up in the same process chain block after all loads are done. This means that data will not be available for reporting until all loads have finished, something our customers complain about.
Because parallel rollup jobs collide, rolling up up after every infopackage would make our loadschedule very unflexible (difficult to plan parallel processes).
Is this possible (by changing a setting somewhere) to change this and make load available for reporting at all times, or is this one of SAP's standard programming decisions without any workarounds?
Cheers,
Eduard

Aggregates data is maintained in aggregate tables.
Unless, you roll it up after every data load, the aggregate data wont be correct and it wont be consistent with the data in the cube.
YES< the roll up job will not be complete unless the loading job is compete.
One suggestion is to review the process chain jobs and see if you can reshuffle the jobs.
But aggregate roll up has to happen after data loading job of that cube on which aggregate is built .
Ravi Thothadri

Queriws not included for reports

Similar Messages

Maybe you are looking for