Querry regarding work centres

hi guys
1. anybody plz explain the concept of standard values that are maintained in workcentres and how they are calculated when work centre is assigned to operations in order.
2 any doc regarding costing of orders ?
regards
pushpa

hi pushpa
satandar values are used for calcualtion of time spend for partcular workcenter ,for example if it is machine category you will create standard value which contains setup,machine and labour which contains the formula for calculating the execution times for that particular activity.
setup-15min
machine-30
labour-15min
then the system will calculat the price based on the planning in KP26
for PM point it is basically NO STANDARD VALUES,hence you have to specify only the activity type in the costing tab page ,cost center and the formula for calculating the times
regards
thyagarajan

Similar Messages

Pm querry regarding work centre

hi
1.any one plz tell me about formulas and how they are given in work centres and related parameter settings for formulas.
regards
sharath

For standard as Thyagarajan said..
Capacity - SAP008
Scheduling - SAP004
Costing - SAP008
Formula in Workcenter:
http://help.sap.com/saphelp_erp2004/helpdata//EN/b1/c03348439a11d189410000e829fbbd/frameset.htm
Hope this helps-

PM Querry regard Work clearance

hi
plz explain me the process flow of work clearance management.
regards
pushpa

Hi Kolla.......
Work Clearance Management system consits of providing of approvals required for Carrying out works.........it could be like permits required for carrying out work involving danger e.g. Welding work is always related with Hot Work Permit in organisations ...... Similarly permits like functional, say clearance of order having value greater than 100000 is to be done by Maintenance manager...so attaching the permit with order makes it only to be released by Manager.......
Moreover...these links will be helpful for you.........
http://help.sap.com/erp2005_ehp_02/helpdata/en/8c/fc71858a4811d4a7d20060087a7a74/frameset.htm
http://help.sap.com/erp2005_ehp_02/helpdata/en/52/dd9e3876d64b76e10000009b38f842/frameset.htm
Regards........

Work centres for employee of more than one plant

Hello experts
I have a question regarding work centres. Our department is managing a pool of workers which consist of employee from more than one plant. Somebody had made experience concerning this issue?
Furthermore we have to manage external workers as capacity. How can I build up this in SAP?
Best regards

>
> I confused plants with company code.
>
This bit difficult for me to decide and say something.
Depends on the business requirement and business process and legal statuses it will be decided.
some time plans can also be company 'codes'.
if the management wants to differentiate plants in financial terms plants may become company codes.
>
So we have employees of different company codes which get managed by one department manager. Is that possible to make one work center so that we are able to manage them together. Seems infeasible. So we have to create for every company code one work center, but we never have an overview of our total workers...
>
One thing you need to get clarified here. Company is a separate legal entity.
if you want one employee to work in different companies on different assignments you support use (MGE and CE concept)
>
> If he/she working in two different site we can manage the situation with dual reporting concept.
> and with:
> For cost center you can always use cost center split. while posting to FI/CO.
>
Dual reporting is to manage the people.
Cost is for final analysis ( where employee work how much incured, how much profit/loss earned)

WORK CENTRE IN EQUIPMENT MASTER DATA

Hello All,
In IE01 tcode > creation of equipment , pls tell me what is the relevance of work centre in location tab ??
Thanks,
Sunny

Hi
Work Center
Definition:Operations are carried out at a work center. In the R/3 System work centers are business objects that can represent the following real work centers, for example:
Machines, machine groups
Production lines
Assembly work centers
Employees, groups of employees
Use
Together with bills of material and routings, work centers belong to the most important master data in the R/3 production planning and control system. Work centers are used in task list operations and work orders. Task lists are for example routings, maintenance task lists, inspection plans and standard networks. Work orders are created for production, quality assurance, plant maintenance and for the Project System as networks.
Data in work centers is used for
Scheduling
Operating times and formulas are entered in the work center, so that the duration of an operation can be calculated.
Costing
Formulas are entered in the work center, so that the costs of an operation can be calculated. A work center is also assigned to a cost center.
Capacity planning
The available capacity and formulas for calculating capacity requirements are entered in the work center.
Simplifying operation maintenance
Various default values for operations can be entered in the work center.
Look at CR01 ,CR02,CR03 Transaction
table : CRHD Table
<b>Reward points for useful Answers</b>
Regards
Anji

Creating/Copying a Work Centre,also a Production Scheduler and Cost Centre.

Hi All,
I am trying to create a new work centre based on the settings of a previous one? First of all,how I can do this?
Secondly,after I have created the new work centre (having copied being copied from another),I need to create a new production Scheduler and Cost Centre? How I will be able to do so,also?Will the Production Scheduller and Cost Centre assignments fom the old work centre be copied,too,or I will need to create/copy these from scratch?
All help greatly appreciated,will award points to all useful answers.
PAPJ1.
Edited by: PAPJ1 on May 20, 2011 11:01 AM

Hello,
You can create a new work center by copying an existing work center. in the cr01 screen in the copy from column put the plant name and Ref. work center name and put enter. all the existing data will be copied to the newly created work center. no need to create new assignment to Production Scheduller and Cost Center.
Hope it helps.
Regards
Alok

Restricting the change of workcentre in CO11N to selected work centres

Dear PP Gurus,
I have included the following screen
0420: Personnel: incl work center and posting date in the confirmation profile, so that the user can change the work centre at the time of confirmation. However the user wants that there should be a check where in only the workcentres which are used in parallel to be allowed for the perticular operation.
Please guide how to achieve this? Can we have a check thorugh any of the user exit below:
CONFPP02 PP order conf.: Customer specific input checks 1
CONFPP03 PP order conf.: Cust. specific check after op. selection
CONFPP04 PP order conf.: Customer specific input checks 2
CONFPP05 PP order conf.: Customer specific enhancements when saving
Eg.
For operation 0020 the user may perform the confirmations on Weld1 /Weld2 /Weld 3 machine. Now the system will allow to select any work centre other than these three. That may lead to wrong confirmation. The user wants to restrict the work centres to be selected to these three only. These three machines are mentioend as parallel sequence in the routing.
Regards
Ankush

Hey..
How did u resolve this? i have the same kind of requirement and getting the same error as direct navigation not allowed.
Can you please let me know. It's urgent.
Thanks,
Mahesh

How to Create New Activity Type for Assiged to work centre Costing in Acti

Dear Sir,
We have four activity type to assigned in workcentre Costing Activity. Details are as under
AIRJET     2010     AIRJET
DONIER     2010     DORNIER
SULTEX     2010     SULTEX
SULZER     2010     SULZER
in addition one more loom is comming in our unit and require new activity type.
How can i create new.
Please guide.
Thanks in advance
Regards
Ajit

Dear ,
To create new Activity Type , you need to follow the below steps :
KA01 - Create Primary Cost Element for the new activities type.
KL01 - Create Activity Type tied to the primary cost element.
KP26 - Change Activity Type/Activity Price Planning - maintain the Variable price
Assign the activity type to cost center using T code KP26.
In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal Year as 20xx.
Click on Overview tab on top and key in costing details in this screen.
After performing this ,while creating the work center ,this combination of activity type & cost center should be assigned.
At work centre level , you should have
1.Create Standrad Value Key -OP19 and Formula Key in OP49.
2.Create Formula Parameters in OP7B or u can use existing one to assing in the Standard Value Key
3.In CR02-Assing the Standard value key in Basic Data and select the Formula Key in Costing tab with cost centre assingement .Save
Try and check
Regards
JH

How to assign work centre in OM

Hi,
In organizational structure how to assign work centre.
it is necessary to assign cost centre to org structure.how ?
President has to be given personnel no.?
if employee is reporting to two superiors of different depts or different regions ,how the employee should be placed i.e dual reporting?
Urgently reply.
Thks
Archana

Hi Archana,
1. To assign Work Center the T-code is PO01.
2. Yes. In SAP HR every employee has to be given Personnel Number irrespective of their designations.
3. No its not possible according to me (Gurus Pls correct me too if I am wrong)
Hope above answers are helpful to you.
Regards
Pavani
Remainder: Points to be given on answered.

Activity type in work centre

Hi,all,
I have a requirement as mentioned below-
I have certain pm work center like engineer,fitters.But under engineer i have 3 different activity type like Sr.engineer time,Asst.engineer time,Jr.engineer time.I have assigned all these 3 activity type in my work centre in cost tab page along with standard formula SAP008.Now , my requirement is when I assign this work center in my equipment or maintenance order ,in operation tab pages of maintenance order ,only these three activity type should flow from where I want to select my relevant activity type.But instead of this,all the activity type around 10 nos whatever defined by CO consultant , is flowing to my order from where i need to select.I want only those 3 activity type which I had defined in my work center.can anybody please explain how to fulfill my requirement.thanks in advance.
rgds
rajib

hi
you can make the default cost element by creating the external profile in IMG and assigning to the order type ,also in easy access screen during order creation you can mention as default values in the menu Extras>settings>default values
As per what cost element has to be specified kindly consult with the CO team,regarding the mandatory field may be you have specified the fields as mandatory in IMG settings,kindly check
regards
thyagarajan

Work centre change in production order

Hi,
During creation of production order, i want to change the work centre if in the existing operation, that particular work centre is overloaded.
Could any one let me know what are the steps involved in it.
Re

Hi,
Goto CM25 & select the Overload workcenter & underload workcenter .
Inside the planning tabel select the Operation from "Order (Pool) tabel" and drag manually to the "under load workcenter " displayed in upper table (workcenter) for required date. Now the operation workcenter has become changed & rescheduled.
Regards
Pradeep

Difference in Main work centre and Operation workcentre

Hello PM Gurus,
In CS order, we have two work centres. One at header level called as Main work centre and another at operation level.
Why do we have two work centres. The one at operation level itself should have been enough.
There is a main work centre at functional location too ( Organisation tab). So what is the connection if we use this functional location as the reference while creating a CS order.
Please reply soon.
Cheers
Sunny

Hi Sunny,
The work center at haeder i.e., Main Work Center is the reponsible work center(say a department). It means it takes the reponsibility of the whole job mentioned in that work order(or job given by production dept.). Now, assume , it further distributes the whole work to its own sub-dept or different work centers as per nature of job. Say, electrical related work to elec work centers etc., by ,means of assigning to different operations.
The Main work center's cost center will be copied as responsible cost center in Additional data TAB of the order.Now thus you see commercially the responsibility of doing the job lies with the responsible cost center (or say Main work center).
Hope it is clear.
Regards,
Rajesh

Work centre deletion

Hi Experts,
I need some help regarding deletion of work centre.
One of our users trying to delete some work centres, he is sure that these are no longer used. He deleted few successfully and and not able to delete few. These are never meant for time booking. How to trace those workcentres, where they are being used.
I have tried CA80 but could not get any info(object not used)
Can some throw me some light?
Regards,
Laxminarsimha

Thanks for the reply.
I have managed to get the where used report by CR40
Regards,
Laxminarsimha

How to measure work centre performance in the pp point and pm pinot of view

Dear Guru`s,
how to evaluate the work centre performance in the pp,pm point?
how to evaluate the OEE (overall equipment efficieny)?
can anybody suggest that, if there is any transactions are avialable to get the reports or any process is to be followed to evaluate these?.
regards,

hi
you can evaluate the PM work center using t-codes
CR05 - Work Center List
CR06 - Cost Center Assignment
CR07 - Work Center Capacity
CR08 - Work Center Hierarchy
with this you can get the requirment,available and overlaod of the capacity
OEE cannot be directly calculated you can develop the custom based program to calulate the one with available input,( available hrs,down time hrs)
regards
thyagarajan

Work centre wise total running time and production

Hello,
I have a requirement to show total running hours for work centres and total production quantity produced by work centres.
Is there any cube for this in PP?
Please respond.
Best Regards,
AI

Well cube 0pp_c04 provides work centre wise GR quantity. The key field is 0GR_QTY. But i need workcentre (machine) hours used to produce the material.
Got it?

Querry regarding work centres

Similar Messages

Maybe you are looking for