Query about Proforma Invoice (F5) and Excise proforma Invoice (JEX)

Dear all,
I would like to know for excisable goods, customer should be sent two separate invoice? i.e. Pro forma invoice (F5) and Excise Invoice India (JEX). or only excise invoice India (JEX) should be sent. Please help me for the same.
Thanks in advance.

Hi,
If excise is relevant then use JEX proforma invoice.So that excise values will flow from invoice to excise transaction "J1IIN"-factory excise invoice.
Configuration to move excise values from proforma has been done for Billing type "JEX"
in Excise configuration Logistics General>Tax on Goods Movement>India>Outgoing Excise invoice>Assign billing types to Delivery types. you will find the JEX been assigned.
In the standard system, there are two document flows that you can use:
Standard order (document type OR) -> Outbound delivery (LF) -> Proforma excise invoice (JEX) -> Invoice (F2)
Standard order (OR) -> Excise invoice (JF) -> Invoice (F2).
Assign Billing Types to Delivery Types
Use
You enter outgoing excise invoices by referring to either of the following documents:
Customer invoices
Pro forma excise invoices
These options are represented in the system by different document types and document flows.
In this IMG activity, you:
Specify which billing document types you use as a reference for CENVAT utilization
Assign them to the appropriate delivery document types
Requirements
You have set up the delivery types and copy control as follows:
Create separate delivery types in Customizing for Logistics Execution (LE), by choosing Shipping -> Deliveries -> Define Delivery Types.
Set up copy control for the delivery types in Customizing for LE, by choosing Shipping -> Copying Control -> Specify Copy Control for Deliveries.
Create billing types in Customizing for Sales and Distribution (SD), by choosing Billing -> Billing Documents -> Define Billing Types.
Set up copy control for the billing types in Customizing for SD, by choosing Billing -> Billing Documents -> Maintain Copying Control for Billing Documents
regards

Similar Messages

  • SD - Excise Invoice creation and Excise Invoice cancel

    Hi SD Gurus,
    My requirement is to create a automatic excise invoice while creating a sales Invoice....
    I have few questions?
    1.What are the settings required for automatic creation of Excise Invoice?
    2. Currently iam following the below flow :
    VA01(OR) -
    >VL01N(LF)  -
    > VF01(F2) -
    > J1IIN(JEX)...Are  there any problems if i follow this flow?
    3. How should i cancel the Outgoing Excise?Whats the flow and Tcodes for the same?
    Your expertise and suggestions will be very useful .....
    Thanks
    Sasi

    Dear Sasi
    To cancel Excise Invoice
    1)  TCode -  *J1IH*
    2)  Go to IMG Path -- Logistics-General --> Tax on Goods Movements --> India --> Account Determination --> Specify G/L Accounts per Excise Transaction.
    Here you have to define the Excise Transaction type CEIV for the combination of your Excise Group, Company Code and respective G/L Account.
    thanks
    G. Lakshmipathi

  • A/R invoice+payment and A/R invoice PLD reports

    We are using PLD to generate our reports. Our A/R Invoice+payment report is different from our AR invoice. We have designed to report formats for this in PLD. However, PLD allows to preview only one report that has been made default. Is there an option that we can use to select the type of report to print especially for these reports?
    Regards,
    Asif

    Hi
    I don't think there is any alternative way beside selecting PLD everytime you print the layout .
    I believe it is done by same person (both A/R+ payment and A/R invoice )
    If not you can do :
    1. make your PLD  default  by user  or
    2. In most cases ,only few customer pays right away , you can set PLD default by Business partner or customer who does that
    Hope this helps
    Bishal

  • Park invoice, workflow and booking matched invoices

    Hi there,
    I have a question, a customer wants to register all invoices as parked invoices. All parked invoices will be transferred to workflow. In the workflow there should be a check for two-way and three-way check. If the parked invoice matches then the parked invoice will be booked (FI) without interference of employees to check the invoices. If not Ok the parked invoices will be checked by clerks and approve or reject it. The process is more complicated but in principle this is the process.
    Reason for parking is that the invoice should be checked first before it will be booked since cancelling invoices is not very practical.
    The question is, is it wise to do it that way or are there other alternatives?
    Is checking parked documents (two-way three-way) within the workflow possible or is checking only carried out for booked invoices (MIRO)?
    Regards Kees

    You may find some information here.
    http://help.sap.com/saphelp_47x200/helpdata/en/33/4c9a34272a5f2ee10000009b38f83b/frameset.htm

  • Another query about installing BT Infinity2 and lo...

    History.
    We occupied a new build house in 1998.  It was fitted with a BT Master Socket (Line Box) which is situated in a front corner of the Living Room.  We wanted to have the 'phone in a different corner of the room and also wanted to install some more electrical sockets and television aerial sockets, so before we moved in we set about doing that.  While we had holes in the walls and floors lifted we took the opportunity to install some telephone extension sockets.
    The Telephone Installation.
    Using a BT extension kit and BT junction boxes.  (and connecting all six wires of the cable into the appropriate locations)
    From Line Box in Living Room to Bedroom 3, which is immediately above -  one cable within the cavity wall to a junction box under the floor of Bedroom 3.
    From that junction box -  one cable to Bedroom 3 telephone wall plate and
    one cable to another junction box under the landing floor.
    From the landing floor junction box - one cable within the wall back down to an inner corner of the Living Room to a telephone wall plate   and 
    one cable within a wall down to the Kitchen telephone wall plate and
    one cable under the floor to Bedroom 1 telephone wall plate.
    All extensions have worked well since then.
    My Line Rental has always been with BT and except for a brief period with Talk Talk my calls have also been with BT.
    We later obtained AOL Dial Up which worked fine then later AOL Broadband. When we obtained the Broadband service we fitted BT Filters to each of the extensions in use and had no problems. The AOL Router and desktop computer are in Bedroom 3 plugged into that extension. Lately, the AOL Broadband has become impossibly slow so we have ordered BT Infinity 2 which is due to be installed next week. 
    Question 1.
    I understand that the normal installation installs a Broadband Filter plate, which includes a Broadband socket,  in the Line Box between the BT line and the telephone plug socket.  Is it possible for the extension wall plate in Bedroom 3 to be changed to a Line Box to accomodate said Filter plate without any other work being necessary?
    Question 2.
    If the above is possible, can the original Line Box in the Living Room be left in situ and useable as an extension ?
    Question 3.
    If the two above are possible can we then remove all the Line Filters from the extension sockets or will one always be necessary in the original Line Box in the Living Room as the new Filter fitted in Bedroom 3 is "downstream" of the incoming BT line?
    Question 4.
    What does backwiring mean?
    Solved!
    Go to Solution.

    Well it's installed and working.
    I have to admit that after reading some of the threads on this site I was rather apprehensive as to what to expect and what could or could not be  done. 
    I received two email reminders/confirmations from BT about the forthcoming engineer visit.
    The engineer telephoned on the morning of the appointment to confirm that he was en route and he arrived on time.
    I explained my wiring set up and he advised that this was not a problem as he could install wireless.  I commented that BT advised ethernet cabling for the fastest speed.  He replied that in his experience the speed was subject to many variables and that he personally used wireless and that it was just as fast)
    He fitted a replacement Master Socket (didn't just alter the already fitted one), connected up the Hub and Modem, went off to the street cabinet, returned and confirmed that my daughter's laptop was connected to the Hub, and that was it. He gave us the standard advice about the speed that we could expect and that it may vary considerably for the first few days.  I cannot recall the actual speed quoted but do know that it was many times faster than we had been forced to endure from our previous provider.    BT call centre had advised us that the engineer would be able to supply a wireless adapter to replace the one I was using in my laptop, but that was wrong information as he advised us that in his experience this had never been the case.
    After he had left we simply deinstalled the Netgear from my laptop and re-connected the Netgear adapter I already had to the Hub and that was my laptop connected.
    We bought another Netgear Wireless Adapter for the Desktop and installed & connected that to the Hub.
    My wife and daughter both have Kindle Fire devices which happily talk to the Hub by Wi-Fi  and my daughter's Smartphone also talks to it, so everyone is happy. 
    The only problem that we encountered was when I switched off the power to the Hub and Modem whilst tidying up the cabling. When I powered up again we had lost Broadband and the Lan1 light on the Modem was not lit. The troubleshooting guidance advised re-starting the Hub, but that didn't solve the problem.  Our instructions advised that if this occurred on the day of installation that we should wait until after midnight on that day to ascertain whether Broadband had re-connected.
    The following morning I re-read the troubleshooting guide in the brochure and tried re-starting the Hub but it still made no difference. We called the helpline number who advised us to press the "re-set" button on the Modem for 20 seconds then the re-start button on the Hub for 10 seconds.  (The troubleshooting guide made no mention of re-setting the Modem. )    That worked.
    We've had one slight problem since then when I tried mounting the Modem on the wall instead of it lying on the carpeted floor and moved the Hub to the end of the window sill behind the curtain. Shortly after that we lost the wirless connection although all the relevant lights on the Modem and Hub were lit.    The connection returned when I moved them back to where they had been previously. I'm still trying to figure that one out.

  • Query about Keep Buffer Pool and Recycle Buffer Pool

    What will Keep Buffer Pool and Recycle Buffer Pool contains actually in Database Buffer Cache, specially what type of objects? I know the definitions but need to know the practical aspects about them.

    918868 wrote:
    What will Keep Buffer Pool and Recycle Buffer Pool contains actually in Database Buffer Cache, specially what type of objects? I know the definitions but need to know the practical aspects about them.I believe you have already got the answer from the experts. Just to echo the same, in any cache, either Buffer Cache(default), Keep or Recycle, its going to be data buffers which are actually the placeholders for the data blocks that are available on the disk. The default cache is going to throw away the lesser used buffers as fast as possible. And if you don't want this to happen, you can use either of the other two, indepandant caches-Recycle and Keep. The keep cache , as the name suggests would keep the buffers in it for a more loonger duration compared to the default cache. This probably would be a better idea when you know that some buffers are meant to be reused again and again. Recycle is going tobe for those, which are very seldom used and you don't want them to choke up the caches at all. For the buffers kept in the Recycle cache, they would be thrown out almost instantly.
    Read the link that's given to you. It contains a lot of stuff that would further make things clear.
    Aman....

  • A query about Time Capsule, Ethernet, and DSL modems...

    When I originally set up my modem, I used the network assistant and it seemed to "auto-connect", where the assistant tells you that your ISP "may allow you" etc. This was done with the ethernet cable as Modem to Macbook Pro. Then when I purchased a TC, I simply connected the ethernet cable to the TC and let Airport Utility set up a wireless network.
    All was fine, until I was trying to ensure my security was half-decent. I changed a few settings in the TC, and then spent an afternoon trying to get my MBP to "see" the wireless network. I got that managed as well.
    What's confusing me is this, and I hope someone can help me and explain it like I'm a 5-year-old.
    1. In speaking with the ISP tech support, they seemed pretty sure I had to enter specific DCHP, DNS, etc. values in their fields, yet with the network assistant, it seemed to do this not only on its own, but with different values (numbers) then the one tech support told me to use, including an assigned "public" 192 IP address.
    2. Moreover, the ISP told me I should use PPPoE, yet the network assistant seemed just fine with Ethernet and DCHP.
    3. My ethernet IP address (System preferences/Network) is different from my Airport IP address. Is this normal?
    4. Strangely, when I connect another ethernet cable from the TC ethernet out port to the MBP (I was attempting a quicker Time Machine incremental back up), and turned Airport off (as an experiment), I still have internet connectivity. I thought TC ethernet out to MBP would only be for disk data transfer. Is this normal? If I have Airport "ON", would that cable then only be used for data transfer?
    5. I have the TC in Bridge Mode, with Access Control to "Not Enabled". I originally had my MBP and iPod Touch MAC addresses added to Access Control, until I read that this doesn't really help with security. As it stands now, I increased my WPA2 password from an easy to remember one to a random 25 character one. Basically, I am hoping someone can tell me the settings I should use (with detail) to make both the network settings AND the wireless network as safe as possible without having a computer science degree.
    Additional information: I only use my MBP and iPod Touch, and the wireless network is only for my use. No guests whatsoever. I do have a usb printer connected to the TC. The modem has a wireless "WLAN" feature which I have turned off since I have the TC. For my email accounts, I have the correct ports entered, as far as I can tell and as far as I've been told by those providers. I occasionally use Acquisition (not sure how safe it is security wise), and I'm often online playing Call of Duty 4 (wirelessly). I think that all I can think of that's important.
    I really appreciate everyone's comments and guidance.

    4. Strangely, when I connect another ethernet cable from the TC ethernet out port to the MBP (I was attempting a quicker Time Machine incremental back up), and turned Airport off (as an experiment), I still have internet connectivity. I thought TC ethernet out to MBP would only be for disk data transfer. Is this normal? If I have Airport "ON", would that cable then only be used for data transfer?
    Whichever connection is toward the top of the list in System Preferences-> Network preference pane is the one which will be used.
    5. I have the TC in Bridge Mode, with Access Control to "Not Enabled". I originally had my MBP and iPod Touch MAC addresses added to Access Control, until I read that this doesn't really help with security. As it stands now, I increased my WPA2 password from an easy to remember one to a random 25 character one. Basically, I am hoping someone can tell me the settings I should use (with detail) to make both the network settings AND the wireless network as safe as possible without having a computer science degree.
    WPA2 with a long non-dictionary password is the best wireless security.
    2. Moreover, the ISP told me I should use PPPoE, yet the network assistant seemed just fine with Ethernet and DCHP.
    If your ISP uses PPPoE for Internet connections, the device connecting directly to the DSL modem should be configured to use PPPoE.
    3. My ethernet IP address (System preferences/Network) is different from my Airport IP address. Is this normal?
    Yes

  • On going Query about MSN/Live Messenger and T-Mobi...

    I have this question running on two other boards with no cast iron answer.
    Are there any T-mob UK N900 users who can use the MSN plugin for conversation be it Butterfly, Haze or Pecan?
    If the answer is yes please let me know so I can rule out that it's my T-Mob account set up incorrectly.
    I have a work around at the moment as I'm connnecting via jabber 
    Thanks

    I'm having a great deal of issues trying to access hotmail.co.uk which results in it just timing out. Router restart didn't help. Starting to think there may be a problem somewhere else. Is this happening to anybody else?
    Traceroute:
    Tracing route to login.live.com.nsatc.net [65.54.186.17]
    over a maximum of 30 hops:
      1     1 ms     1 ms     1 ms  api.home [192.168.1.254]
      2    24 ms    23 ms    23 ms  217.32.142.5
      3    24 ms    23 ms    24 ms  217.32.142.46
      4    25 ms    24 ms    24 ms  213.120.163.70
      5    24 ms    24 ms    23 ms  217.32.27.62
      6    24 ms    24 ms    25 ms  217.32.27.182
      7    29 ms    24 ms    23 ms  acc2-10GigE-9-3-0.mr.21cn-ipp.bt.net [109.159.250.230]
      8    44 ms    36 ms    35 ms  core2-te0-13-0-0.ealing.ukcore.bt.net [109.159.250.139]
      9    35 ms    92 ms    33 ms  transit1-xe0-1-0.ealing.ukcore.bt.net [194.72.9.234]
     10    33 ms    39 ms    32 ms  t2c3-xe-9-3-0.uk-eal.eu.bt.net [166.49.168.29]
     11    36 ms    33 ms    32 ms  t2c1-ge13-0-0.uk-eal.eu.bt.net [166.49.237.25]
     12   106 ms   106 ms   106 ms  t2c1-p4-0-0.us-ash.eu.bt.net [166.49.164.225]
     13     *        *        *     Request timed out.
     14     *        *        *     Request timed out.
     15     *        *        *     Request timed out.
     16     *        *        *     Request timed out.
     17     *        *        *     Request timed out.
     18     *        *        *     Request timed out.
     19     *        *        *     Request timed out.

  • EDI - Incoming Invoice Error and GR based Invoice Verification - 51 No GR

    Hi,
    We are implementing EDI for incoming invoices and use Goods Receipts based Invoice Verification.  When processing an inbound IDOC Invoice (type INVOIC01) where the Goods Receipt has not yet been posted, then Inbound IDOC is siiting at Error Status, 51 - No GR documents found.
    Is there any way we can process this as a Parked Invoice or for Verification in the background (MIRA)?  because the current situation is a problem, as 95% of our Inbound Invoices will be received electronically before the Goods are Received. 
    The actual Vendor's delivery note is stored in the segment E1EDP02 (Qualifier 016), field BELNR.
    Currently the IDOC as to sit in error until the Vendor's Delivery Note is Goods Receipted which can be several days later - SAP OSS Note 393883 fro 2001 suggests doing this, but surely this is a common situation.  The IDOC sitting in error in WE02 in the list of IDOCs is difficult to isolate from true errors.
    If this is was mnaul Invoice it could be processed through MIRA for background Invoice Verification later with program RMBABG00.
    We havd SAP version ECC 6.0
    I have spotted OSS Note 501524 which implies that is possible automatically Park Incoming EDI IDOC Invoices, has anyone tried this?  and what would be the transaction/program that could be used to post several at once when the GR has been processed (similar to RMBABG00)

    Hi ,
    You can use the program   RBDMANI2   which will reprocess all the IDOCs (EDIinvoices )that have failed . You can schedule this program in the background and it will post all failed invoices which have the GR posted later .
    We had the same scenario and we have scheduled this program as a daily job at night .
    Regards,
    Hari.

  • How to create invoice, Order and pay the invoice

    Hi,
      I'm new to FI, so can anyone tell me how to create an Order, an invoice for the Order and then pay for the invoice.
    Please provide me the transactions and the steps to do the above three process.
    Thanks in advance.
    Swaroopa

    Create sales order
    http://help.sap.com/saphelp_erp2005/helpdata/en/dd/55fbe0545a11d1a7020000e829fd11/content.htm
    Create production order
    http://help.sap.com/saphelp_470/helpdata/en/b1/c03f5b439a11d189410000e829fbbd/content.htm
    Create Invoice
    http://help.sap.com/saphelp_470/helpdata/en/dd/561009545a11d1a7020000e829fd11/content.htm
    Create delivery
    http://help.sap.com/saphelp_470/helpdata/en/dd/56078c545a11d1a7020000e829fd11/content.htm
    Hope this’ll give you idea!!
    <b>P.S award the points.</b>
    Good luck
    Thanks
    Saquib Khan
    "Some are wise and some are otherwise"

  • Invoice split and copying problem in JEX invoice after ECC6.0 upgrade

    Dear All,
       After upgrade from 4.6c to Ecc6.0 I am facing following problem in STO billing document(JEX)
    1) system created two billing documents for each line item, even though the correction note 885024 applied maually. In 4.6C the system generates single document for the main FG code.
    2) The STO line item contains one FG material and one Returnable Packaging material. The system copies packaging item instead of main FG code. In the 4.6c system, the billing document consists only singe line item.
    Hope I had summarized the issue well and waiting for expert guidance...
    Regards
    Sunil Nair

    Hi Sunil,
    pls check the following criterias in your materials.
    Plant
    shipping point
    shipping conditions
    Transportation grp
    Loading grp
    Regards
    Kedasu

  • Single Commercial Invoice for multiple Excise Invoices

    Hi ,
    The business requirement is like this:
    Contract1- Sale Order1- Delivery1- Excise Invoice 1(17th Feb) - Price As per Contract
    Contract1- Sale Order1- Delivery2- Excise Invoice 2(17th Feb) -
    Contract1- Sale Order1- Delivery1- Excise Invoice 3(17th Feb)
    Contract1- Sale Order1- Delivery3- Excise Invoice 418th Feb)
    Contract1- Sale Order1- Delivery4- Excise Invoice5(18th Feb)
    Contract1- Sale Order1- Delivery5- Excise Invoice 6(18th Feb)
    Contract1- Sale Order1- Delivery6- Excise Invoice 7(19th Feb)
    Contract1- Sale Order1- Delivery7- Excise Invoice 8(19th Feb)
    For all the 8 Excise Invoices, single Commercial invoice with Price based on the Exchange rate.
    Is it possible to do in SAP , if so, what are the settings need to be done.
    Thanks& Regards
    Sri

    Dear Lakshmipathi,
    In standard, we can create excise referencing billing document and I dont know how you could generate multiple excise invoices. Are you generating proforma against each delivery ??
    Delivery1- Proforma Invoice1- Excise Invoice1 (17th Feb) - Customer A- Shiping to X
    Delivery2- Proforma Invoice2- Excise Invoice 2(17th Feb)- Customer A- Shipping to Y
    on 17th Feb one ARE-1 for both the Excise Invoices of Customer A
    Delivery3- Proforma Invoice3- Excise Invoice3 (18th Feb) - Customer A- Shiping to X
    Delivery2- Proforma Invoice4 Excise Invoice 418th Feb)- Customer A- Shipping to Y
    on 18th Feb one ARE-1 for both the Excise Invoices of Customer A
    Finally, for all the 4 Excise Invoices on 28th Feb, Client wants to Send a Commercial Invoice for the total dispatch qty(@1000US$/Ton) and the Exchange rate(Ex:48.46)  is taken based on the Bank Negotiations.
    I would like to understand, Is its possible to create a commercial invoice  with Accounting entries for the above mentioned scenario for Excise Invoice 1 and Excise Invoice 3.(As in Proforma Invoice no accounting entries created). Based on this the client will recieve the payment from the Customer A.
    Thanks & Regards
    Sri
    Edited by: Sri on Feb 18, 2009 3:18 PM
    Edited by: Sri on Feb 18, 2009 3:23 PM

  • Invoice verification and logistic invoice verification

    Hello,
    What is the different between invoice verification and logistic invoice verification?
    My Japanese client need to work with t.code: VXJ2 - customs declaration for import billing documents - Japan
    When i run this report, it finds no data.
    I read the help for this transaction and it says that only invoice verification (and not logistic invoice verification) is supported for this transaction.
    Best regards,
    Avishai Kaplan

    Hi Avishay, 
    Logistics Invoice Verification 
    Logistics Invoice Verification is a part of Materials Management (MM). It is situated at the end of the logistics supply chain that includes Purchasing, Inventory Management, and Invoice Verification. It is in Logistics Invoice Verification that incoming invoices [Seite 11] are verified in terms of their content, prices, and arithmetic. When the invoice is posted, the invoice data is saved in the system. The system updates the data saved in the invoice documents in Materials Management and Financial Accounting.
    Logistics Invoice Verification is closely integrated with the components Financial Accounting (FI) and Controlling (CO). It passes on the relevant information about payments or invoice analyses to these components.
    Features:
    In Materials Management, Logistics Invoice Verification has the following features:
    u2022 It completes the material procurement process, which started with the purchase requisition and resulted in a goods receipt.
    u2022 It allows invoices that do not originate in materials procurement (such as services, expenses, course costs) to be processed.
    u2022 It allows credit memos to be processed, either as invoice reversals or return deliveries.
    Invoice Verification 
    The main aim of invoice verification is to ensure that vendors are paid the correct amount at the right time ( not too late but also not too early ). The process should have a high incidence of fi rst-time matching, to ensure that as little time as possible is spent trying to manually match invoices that appear to be incorrect.it is important to include as few steps as possible in the process, considering that the process of handling payments
    does not in itself add value to the company or to the vendor.
    Main steps: 
    The capture of the vendoru2019s invoice details
      The matching of those details to the details that we
    believe to be correct
      The investigation of any mismatches
      The release for payment of matched invoices
      The accounting entries involved ( including taxes and
    delivery costs )
      The details recorded for audit purposes 
    Hope this information helps you out in understanding the differences  between the two
    I ncase of any further clarification do put a message
    In case if this information is of any help to you please do reward accordingly
    Thanks  & Rewards
    Pavan

  • Proforma Invoice - IDoc and message type

    Hi,
    The requirement is to send proforma invoice to legacy system upon creation. We use PI as middleware.
    Is it possible to send to proforma invoice data using IDoc?
    If IDoc then we have to use message control? Am i right?
    What is the process code and what is the basic IDoc type/message type to be used for this?
    Thanks for any help.
    Cheers,
    Srini

    Hi Srinivasan
    Basic type           INVOIC01  Invoice/Billing document
    Message type                   INVOIC     Invoice / Billing document
    Process code         SD09
    Description          INVOIC: Invoice
    Function module      IDOC_OUTPUT_INVOIC
    best of lucks and Happy Diwali
    Nandu

  • Generating Proforma invoice (F8), and getting print immediately.

    Hi Gurus,
    When generating Proforma invoice for deliveries (F8 type invoice in VF01) they do not print immediately. We have to save in VF01 and then go to VF02 to print. This needs to be changed to print immediately on saving in VF01.
    What is the configuration setting involved for this.
    Please let me know for the same

    IMG --> Sales and Distribution --> Basic Functions --> Output Control --> Output Determination --> Output Determination Using the Condition Technique --> Maintain Output Determination for Billing Documents
    --> Here maintain  new condition table with a combination of Billing Type, Sales Organization desired fiels & assign the same to Access sequence being used. Ensure that fields are released in Access Sequence.
    Maintain Condition record for the same, based on Billing Type, which will address the issue.
    Regards,
    Rajesh Banka
    Reward points if helpful

Maybe you are looking for

  • Using iPhone in US and later in Europe,,,? Lock problem?

    Hello, Anyone know whether I can buy an iPhone here in the US, use it for the year we will be here and then take it back to Europe and us it there? I understand that I may need to request an unlock code (??) to be able to do that. Any advise from tho

  • Urgent help needed in xd01

    hi, i'm trying to add custom fields in XD01.. we have 6 tabs in the second screen in XD01.. it should come in 7th tab.. for this in the PREPARE MODIFICATION-FREE ENHANCEMENT OF CUSTOMER MASTER RECORD in SPRO, i have created one screen group 'Z1' and

  • BootCamp drivers crash Windows 7, slow startup, boot order?, backup drive

    I have 3 issues that may be related or possibly not related to each other. I use an iMac (currently with Leopard 10.5.8 on a completely clean installation of both Leopard and Windows 7 on a freshly formatted and partitioned drive). Issues: 1. Before

  • SAP Import Letter of Credit

    Hi All, Can anybody guide me whether letter of credit can be mapped in SAP MM. Do i need to make changes in existing pricing procedure for L/C . Pl. guide

  • How to Implement a "Please wait......" animation

    Hi, Hoping someone can point me in the right direction in implementing a "Please wait......" ajax loading animation process that is then hidden on result set completion. I have a report where I would like to indicate to the user that the report is ru