Query about the forum date
When I browse this forum as a guest, today's date appears as "Mar 2" (and that was yesterday). When I log in, however, the date is given as (the correct) March 3.
What's up with that?
When you're browsing as a guest, click on Guest Settings and change the time zone. This information is stored as a browser cookie and not on the server; therefore, it will need to be repeated for each cookie database instance you use. The settings of an account holder are stored on the server.
(41313)
Similar Messages
-
Hi Support,
I have a query about the DR -Standby:
1) Is FAL_CLIENT and FAL_SERVER parameter mandatory in both Primary and standy node?
2) How many standy by we can create for primary node?
ThanksDear Prashanth,
Quantity of 3 is rejected so you blocked it? why you want to bring it again to Quality? Use of putting in block is as follows:
Since quantity of 3 is rejected and need to be kept aside you are blocking the stock, the purchase person will send back this material to vendor directly from block stock (MBRL or MIGO). This is best practice.
There can be other situation that your vendor came to your place and done rework om that 3 blocked items and you are satisfied with the quality then you can use respective movement for transferring from block to unrestricted, if you want lot to be generated then assign 08 insp type and do inspection.
Hope this will help you better.
Best Regards,
Shekhar -
Query about the "User Decision
Hi,
I have a query about the u201CUser Decisionu201D, Suppose I have received the 10 quantity and lot get created for 10. At time of UD (QA11) I put 7 quantities in unrestricted and 3 in blocked stock .what we generally use to do with that block stock? Whether we again transfer it to quality stock (Movement 349)? Or move directly to unrestricted (movement: 343).
I tried to move the blocked stock in u201Cquality stocku201D in transaction MB1B with movement 349 but it had given error u201CChange the inspection stock of material 9112223334A in QM onlyu201D. In QM how to transfer the blocked stock in quality stock?
Regards,
PKDear Prashanth,
Quantity of 3 is rejected so you blocked it? why you want to bring it again to Quality? Use of putting in block is as follows:
Since quantity of 3 is rejected and need to be kept aside you are blocking the stock, the purchase person will send back this material to vendor directly from block stock (MBRL or MIGO). This is best practice.
There can be other situation that your vendor came to your place and done rework om that 3 blocked items and you are satisfied with the quality then you can use respective movement for transferring from block to unrestricted, if you want lot to be generated then assign 08 insp type and do inspection.
Hope this will help you better.
Best Regards,
Shekhar -
About the Key date in Query Properties
Hi,
With regard to the Key date in Query Properties, As I understood from the previous postings that it is used to filter out the data for Time dependent Master data object. But once we set up this key date, isn't it applicable to all InfoObjects in Query. For example, if I give Key date as 20/05/2007, can't we get data beyond 20/05/2007 to all the objects in Query when I have Employee Group as Time dependent Attribute. And if we create any variable for Key date under calday, isn't it applicable to all objects. How is it applicable to only Employee Group.Re: Key Date in Query Properties -can it be dynamic ?
Say i have a query that has a user input date range interval. Say the query is supposed to display some key figures restricted on a Time Dependent Characteristic attribute for the date range.
So, in the Query Properties - i really DONT want to set the Key Date to a fixed date ( today or a user input date) but instead i want to set it to the system date that the BW olap processor is going to use while selecting each and every row from the cube while processing the date range.
for example while processing the date range - for each one of the dates it hits upon a fact table record and it has to fetch the attribute from the time dependent master data table using that date and if this attribute is 'x' then aggregate the key figure if not go to the next one...
do i make sense ? let me know if the above doesn't. I will try to explain my Q again. Want to know if BW lets you do that.
thanks
Arun Pond. -
Query about building forums using JSP
Hi everybody here . I hope you are fine and you are doing better .
I have a query about JSP ,I see SUN forums here is built using JSP , I want to know What the Probability to build an open source Forum using JSP like those built with PHP For example : PHPBB and other examples .
On other query If there is already Forums built using JSP , What is this Forum ?
Thank you very much at all
Edited by: ahmedhussien on Jun 17, 2009 5:11 PMScroll a bit down and check the "powered by" logo.
An alternative is JForum. Just google "java forum software" or something straightforward like that.. -
Thank you to everyone who participated in our Forum reskin private beta. We received a lot of very helpful feedback that went a long way in helping us really understand what is most valuable and important to all of our members.
The Adobe Forums have not had a major design update since we originally launched on the Jive platform back in 2009. However, with the launch of Adobe Creative Suite 6 and the Adobe Creative Cloud, we expect that the Adobe Forums will become an even more essential resource for the entire Adobe community.
In fact, one of the major design goals was to create a more integrated user experience between the Creative Cloud, Adobe.com, and the Forums. Some of the major changes include:
Dramatically simplified global navigation
More consistent sign-in/sign-out experience
Common UI elements and interface conventions, including shared fonts (Adobe Clean served via TypeKit) and color palettes. In fact, both the Creative Cloud and Adobe Forums now use a dark-grey right-hand navigation panel where all of the tools/actions are aligned (just like in our desktop apps).
Streamlined interface, pared clean of cluttered icons and redundant options — so you can really focus on the content that you care most about.
And finally, an optimized layout designed to cultivate the true heart and soul of the Forums experience: community Q&A.
This last goal, in particular, is the most exciting for all of us on the Adobe team – we understand that in a true community of experts, help is not a document. It’s a conversation. That conversation starts here – in this forum with this community. And the whole team here at Adobe, from design to engineering, honors that simple idea and we hope to share more exciting news with you over the coming months as we explore fresh ways to create connections, conversations, and content.
And yes, we know -- the new theme is still not 100% perfect so please continue to report bugs in the Known Issues thread. The team is listening and we will be responding quickly with new patches and bug fixes on a regular basis. In the meanwhile, we look forward to many, many great conversations to come!Hi Mark,
"the new theme is still not 100% perfect" and so I deliberately waited with my answer a little bit. In addition to this my previous speakers have mentioned, I'll show you the graphical representation on MY computer:
1. A rather insignificant navigation:
2. Presentation is unclean working here:
3. Problems with the character sets:
4. Confusing and a waste of space:
5. The font size or the screen display in my opinion are made too small and therefore difficult to read.
6. Not so important, but I like it and I miss them: Where are the "points"? (correct answers helpful answers)
Hans-Günter -
Does the search query for the forums work at all?
I at the forum through the Adobe Help application. When I do specific searches of the Illustrator forum, even picking search terms that appear in the opening list of most recent discussions, I get NO search results back.
I've expanded the timeframe, and broadened to forums and discussions - nothing back.
It this some glitch by coming to this from a Mac? Very very puzzled.Bob,
Unfortunately, the search function is a search dysfunction most of the time,and many complanits have been made about it here, in the Forum Comments forum:
http://forums.adobe.com/community/general/forum_comments
Here is one of the threads:
http://forums.adobe.com/thread/823088?tstart=0 -
Forums Discussion is exclusively for the discussion of Forums operation. Items such as Forum Bugs, Speed Problems and other topics about appearance and performance of the Forums.
It's not meant as a Discussion area for product sales, support or Operation.
If you got here by accident we may suggest the area to go to. And we may ask how you got here by accident so we can suggest fixes for the problem to appropriate parties.And BTW: its either Dreamweaver or DreamWeaver not dream weaver.
Thanks for correcting my "spelling". And no I don't use that product so I have no clue on the correct term for it.
And for the record the correct way to phrase that is:
And BTW: it's either Dreamweaver or DreamWeaver, not dream weaver.
I don't see any spelling errors. However, the first sentence is fragmented.
It's because he has edited the post. Probably did it so he wouldn't look so stupid when he corrected my grammar. -
How can i get more info about the sent data in RTP?
Hello.
I'm working with the examples AVTransmitt2 and AV Receive2 and i want to get more information about the data that it is being sent to de receiver side. In AVTrasmitt2 i only see a calling to processor.start();. How could i know each packet that AvTransmit2 sends to the other side. I want info like the size of the data, the quality, format, etc..Hi!
As I mentioned above. RTPSocketAdapter has two inner classes, SockOutputStream and SockInputStream.
SockOutputStream have a write method which is called when RTP data is sent over the NET. SockInputStream have a read method which is called when RTP data is received.
If you for instance want to know exactly what is sent you can parse the byte array that comes into write.
Like this:
* An inner class to implement an OutputDataStream based on UDP sockets.
class SockOutputStream implements OutputDataStream {
DatagramSocket sock;
InetAddress addr;
int port;
boolean isRTCP;
public SockOutputStream(DatagramSocket sock, InetAddress addr, int port, boolean isRTCP) {
this.sock = sock;
this.addr = addr;
this.port = port;
public int write(byte data[], int offset, int len) {
if(isRTCP){
parseAndPrintRTCPData(data);
}else{
parseAndPrintRTPData(data);
try {
sock.send(new DatagramPacket(data, offset, len, addr, port));
} catch (Exception e) {
return -1;
if(debug){
System.out.println(debugName+": written "+len+" bytes to address:port: "+addr+":"+port);
return len;
private void parseAndPrintRTPData(byte[] data) {
// part of header, there still left SSRC and CSRC:s
byte[] rtpHeader = new byte[8];
System.arraycopy(data, 0, rtpHeader, 0, rtpHeader.length);
ByteBuffer buffer = ByteBuffer.wrap(rtpHeader);
int word = buffer.getInt();
// version
int v = word >>> 30;
System.out.println("version: "+v);
// padding
int p = (word & 0x20000000) >>> 29;
System.out.println("padding: "+p);
// extension
int x = (word & 0x10000000) >>> 28;
System.out.println("extension: "+x);
// CSRC count
int cc = (word & 0x0F000000) >>> 24;
System.out.println("CSRC: "+cc);
// marker
int m = (word & 0x00800000) >>> 23;
System.out.println("marker: "+m);
// payload type
int pt = (word & 0x00700000) >>> 16;
System.out.println("payload type: "+pt);
// sequence number
int seqNbr = (word & 0x0000FFFF);
System.out.println("sequence number: "+seqNbr);
// timestamp
int timestamp = buffer.getInt();
System.out.println("timestamp: "+timestamp);
private void parseAndPrintRTCPData(byte[] data) {
// this only works when the RTCP packet is a Sender report (SR).
// All RTCP packets are compound packets with a SR or Receiver report (RR) packet first.
// part of header, there is still the report blocks (see RFC 3550).
byte[] rtcpHeader = new byte[28];
System.arraycopy(data, 0, rtcpHeader, 0, rtcpHeader.length);
ByteBuffer buffer = ByteBuffer.wrap(rtcpHeader);
int word = buffer.getInt();
// version
int v = word >>> 30;
System.out.println("version: "+v);
// padding
int p = (word & 0x20000000) >>> 29;
System.out.println("padding: "+p);
// reception report count
int rc = (word & 0x0F000000) >>> 24;
System.out.println("reception report count: "+rc);
// payload type, which is 200 in this case (SR=200)
int pt = (0x00FF0000 & word) >>> 16;
System.out.println("payload type: "+pt);
// length
int length = (word & 0x0000FFFF);
System.out.println("length: "+length);
// SSRC of sender
int ssrc = buffer.getInt();
System.out.println("SSRC: "+ssrc);
// NTP timestamp
long ntp_timestamp = buffer.getLong();
System.out.println("NTP timestamp: "+ntp_timestamp);
// RTP timestamp
int rtp_timestamp = buffer.getInt();
System.out.println("RTP timestamp: "+rtp_timestamp);
// sender's packet count
int nbrOfSentPackets = buffer.getInt();
System.out.println("sender's packet count: "+nbrOfSentPackets);
// sender's octet count
int nbrOfSentBytes = buffer.getInt();
System.out.println("sender's octet count: "+nbrOfSentBytes);
}I added a boolean isRTCP to the constructor so to know what sort of data is sent.
Hope this clarifies things. -
Query about the filterable tag in ADF Tables
Hi all,
We having an issue with the the implicit filtering feature provided by ADF. We have followed all the rules for filtering:
1. filterable="true" and sortable="true"
2. headertext is present
3. filterModel="#{bindings.InstanceDetailsVO11Query.queryDescriptor}"
queryListener="#{bindings.InstanceDetailsVO11Query.processQuery}"
Now the filter is working fine. But after we reset the page the filter field still has the previous data entered by the user.
Is there any way we can refresh the field as well?
Any suggestions would be very helpfull1
Thanks.Hi,
You can programmatically clear the filter fields and refresh the table by using the below snippet.
public void resetTableFilterListener(ActionEvent actionEvent) {
FilterableQueryDescriptor queryDescriptor = (FilterableQueryDescriptor)getYourTable().getFilterModel();
if (queryDescriptor != null && queryDescriptor.getFilterCriteria() != null) {
queryDescriptor.getFilterCriteria().clear();
getOrdTable().queueEvent(new QueryEvent(getYourTable(), queryDescriptor));
Try if this works for your requirement.
Thanks -
Query about the Cache in browser Netscape
The Page you are trying to view contains POSTDATA that has expired from cache. If you resend the data, any action the form carried out (such as a search or online purchase) will be repeated. To resend the data, click OK, Otherwise, click Cancel.
Hello All,
I apolozise for my last post which is incomplete. I am having a problem using Netscape 7.01 browser.
I have a servlet which has form fields and it takes in information and calls a another servlet on submitting and inserts the data in the database and shows a confirmation page. If I am using Netscape 4.7 , from this confirmation page if I press browser back button I get a message
" Data Missing
This document resulted from a POST operation and has expired from the cache. If you wish you can repost the form data to recreate the document by pressing the
reload button. "
But if I am using Netscape 7.01, from the confirmation page if I press back button I get the form page and if I click on forward button then I get a message
"The Page you are trying to view contains POSTDATA that has expired from cache. If you resend the data, any action the form carried out (such as a search or online purchase) will be repeated. To resend the data, click OK, Otherwise, click Cancel."
and if I am pressing OK then the insertion operation is taking place once again in the database.
Now how to avoid this condition, how to remove the cached information??
Please help me
Thanks,
Sarada. -
Query About the SAP ABAP Module
Hello My name is Anuj Chaturvedi. I have doing a MCA Course(VITH semester). I want to do a SAP ABAP Module. So Please suggest me that ii is gud for me? Also tell me something more about the ABAP Module. Kindly reply me soon.
Thanks
Anuj ChaturvediHello My name is Anuj Chaturvedi. I have doing a MCA Course(VITH semester). I want to do a SAP ABAP Module. So Please suggest me that ii is gud for me? Also tell me something more about the ABAP Module. Kindly reply me soon.
Thanks
Anuj Chaturvedi -
Question about the forum and my email
Every time I visit the forum ,no matter what i do,submit new messages ,search tutorials and etc,I always receive a email correspondingly.
So I can receive a lot of new emails that are not important for me.I 'd like to cancel this function,How can i config the forum,can anyone give me a hand ?
Thanks a lot!Uncheck the 'E-mail me if someone replies to this" checkbox toward the bottom of the message creation page (just below the Submit Post button). You can also set up to have the notification turned off in your member profile setup options.
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~ -
Using informations about the XML Data Set in *.js
Dear Users,
I hope I am able to explane my problem correctly:
I wonna create a fade effect with various pictures. They don't should blend to 0 - I found a js script that lets the pictures fade from one to the other like this: www.sv-guenther.de
What this script needs is the number of pictures. I put the picture links into an XML file. Everything works as long as write the number or length of the picture children manually.
I tried to read out the length by using the ds_RowCount option. This works fine as long as I use this in HTML context like this:
<div spry:region="ds1" ><script type="text/javascript"> alert({ds_RowCount});</script>{ds_RowCount}</div>
Both works: The alert shows the number 21 AND you can read the "21" and not {ds_RowCount}.
okay, but how do I use the "21" integer in a script block in the head area? like this:
<head>
<script type="text/javascript">
var x = {ds_RowCount};
</script>
</head>
I tried it in different ways: var x = '{ds_RowCount}'; or spry:....
As you can see: I am afraid my scripting knowledge is not the best - like my English is...
Sorry and thank you very much for your help! - any kind of help
best regards from Bonn, Germany
ThorstenDear Ben,
if you would see me, you wouldn't laugh anymore, you would cry -) - but you are in DownUnder - this would look like I am laughing for you - wouldn't it?
Thank yoou so much for remembering me. I have been reading your post about this topic (blend a picture). Once somebody asked the same (or almost the same) like I did yesterday. But the difference is, that if you blend a text to 0 it is big diference blending a picture - in my mind. I would love to reduce the opacity from one picture when the next picture is already behind it. So it looks like a smooth fade in fade out, without displaying the background.
I found a quite good code example for this:HERE
To make it as easy as possible for me I tried to include the number of the pictures straight into the js code. in the meantime I found the correct code option for this: What I was looking for was: getData() and if I combine it with an observer to wait for the "onPostLoad" everything works fine. I am ashamed that I asked first and then lokked into the SPRY API - Sorry!
Everything works fine? No not yet - unfourtunally. So I am pleased to get the chance to ask a second time:
Let's say I have more than one picture and more than one topic. So my XML looks like this:
<leistungen>
<inhalte name="Bauvorhaben">
<inhalt name="Bautechnische Beratung">
<texte>
<text>Beurteilung der Baubeschreibung, Beratung zur Ausführungsplanung</text>
</texte>
<bilder>
<bild></bild>
</bilder>
</inhalt>
<inhalt name="Baubegleitende Qualitätsüberwachung">
<texte>
<text>Stichprobenhafte Kontrollen der Bauausführung zur Gewährleistung der Einhaltung anerkannter Regeln der Bautechnik und vertraglicher Vereinbarungen</text>
</texte>
<bilder>
<bild>3867</bild>
</bilder>
</inhalt>
<inhalt name="Baumängel">
<texte>
<text>Feststellung und Beurteilung von Baumängeln, Ursachenermittlung,Sanierungsempfehlung, Schätzung der Instandsetzungskosten</text>
</texte>
<bilder>
<bild>2857</bild>
<bild>3612</bild>
</bilder>
</inhalt>
<inhalt name="Beweissicherung">
<texte>
<text>Dokumentation von Schäden an Bestandsgebäuden im Einflußbereich von Bauvorhaben, Beurteilung von Schadensansprüchen</text>
<text>Bauzustandsdokumentation, Leistungsfeststellung</text>
</texte>
<bilder>
<bild>1176</bild>
<bild>154</bild>
</bilder>
</inhalt>
<inhalt name="Abnahme von Bauleistungen / Abnahmebegleitung">
<texte>
<text>Einfamilienhäuser</text>
<text>Mehrfamilienhäuser</text>
<text>Wohnanlagen</text>
<text>Bürogebäude</text>
</texte>
<bilder>
<bild>2485</bild>
<bild>3485</bild>
<bild>3481</bild>
<bild>3460</bild>
</bilder>
</inhalt>
<inhalt name="Schiedsgutachten">
<texte>
<text>Rechtsverbindliche Beurteilung von Bauprozessen und Gewerken zur Konfliktvermeidung und -lösung</text>
</texte>
<bilder>
<bild>7080</bild>
</bilder>
</inhalt>
</inhalte>
<inhalte name="Bestandsgebäude">
<inhalt name="Beweissicherung">
<texte>
<text>Dokumentation von Schäden an Bestandsgebäuden im Einflußbereich von Neubauten, Beurteilung von Schadensansprüchen</text>
</texte>
<bilder>
<bild>1176</bild>
</bilder>
</inhalt>
<inhalt name="Gebäudeschäden">
<texte>
<text>Feststellung und Beurteilung von Gebäudeschäden, Ursachenermittlung, Sanierungsempfehlung, Kostenschätzung</text>
<text>Bautechnische Beratung beim Kauf einer Bestandsimmobilie</text>
</texte>
<bilder>
<bild>2108</bild>
<bild>4004</bild>
<bild>1387</bild>
<bild>3488</bild>
</bilder>
</inhalt>
</inhalte>
</leistungen>
First I create an new object
var ds1 = new Spry.Data.XMLDataSet("xml/leistungen.xml", "leistungen/inhalte/inhalt/texte");
So the dsR = ds1.getData() gives me a dsR.length = 8 - correct - because this XML has got 8 <texte> nodes. But some of these <texte> nodes have more than one <text> node. If I asked for the contet of the fifth node dsR[4]["text"] it gives me back "Bürogebäude" = the last sub node content. I wished I could catch the first, second, third as well. Just like a spry:repeat - do you understand?
I figured out that it doesn't help to extend the string like
dsR[4][0]["text"] or dsR[4][0][0].
As far as I understood the Spry framework flattens the XML like a table. So I thought that there might be just in this raw, in the actual column just another object (not a string) to be found.This object I could touch or open with square brackets. Like
dsR[0]["texte"][0]
- but: I can't!
But this would mean, that straight in js I could always only catch the first node value??? I must be wrong!!! But I don't know were!
Dear Ben, Dear Guys out there - is this to difficult what I am looking for or am I blind?
thank you so much for helping me out here - again! -
Query about the feauture in labview
HELLO SIR,
While performing 2-D FFT method of steganography in labview we do use flat command in it.My query is where do we find that command in labview? And Why do we use that?
Thanking you,What are you referring to? What 2D FFT method of steganography? Where did you get this reference the the "flat" command?
You keep posting questions (this one, or this one, or this one) about steganography, but offer little information, and never follow up to the people trying to help you.
Maybe you are looking for
-
ITunes will no longer play any music.
iTunes will open just fine, but when I click play on a song it won't play. The tracking icon won't move at all. I tried uninstalling and reinstalling itunes and the problem still stands. It started when I upgraded to the latest version of iTunes. Als
-
Hp laserjet pro m1217nfw and remote desktop printing
hp laserjet pro m1217nfw and remote desktop printing, is there any issues with said function?
-
I am new to mac and have an external hard drive question
Hello I am new to mac. I used a PC before and stored all of my files (documents, photo's and music) on an external hard drive. The new mac is communicating with my external and is allowing me to open word/excel documents into pages/numbers. However w
-
How to view all workbooks in a Business Area? (4i)
Discoverer 4i, Using Desktop Admin and Desktop Client. I've got a user set in the Admin layer as: Security -> Assigned to the Business Area and set as 'Allow Administration' Privileges -> All 'User' and 'Administration' options ticked When I log in w
-
How do I install flash player on my10.1 tablet galaxy 2
how do I install flash player on my 10.1 galaxy 10.1 tablet 2