Query about the steps for Weblogic Server Upgrade from 8.1 to 10.3

Hi!
We have planned to upgrade our Weblogic Server from 8.1 to 10.3. Could anyone advise me:
1. How to upgrade the Weblogic Server from 8.1 to 10.3? Can the Weblogic Server 10.3 coexist with the Weblogic Server 8.1 in one physical server?
2. Where can the upgrade software be downloaded?
3. We have a web service currently running under Weblogic Workshop as the Weblogic Server is started via the workshop. Can this web service be run under Weblogic Server 10.3?
4. Are there any foreseeable issues/problems that will happen?
Please kindly help me. Thanks a lot.
Best Regards
May

Download location: http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
You can upgrade the domain after you install wls 10.3 using QuickStart.
When we migrated we have moved from windows to linux. We have installed, created domain, created managed servers, configured, etc. from scratch. We didn't face any 'show stopper' issues.

Similar Messages

About the effect for batch level conversion from material to plant level

Dears,
Now we use batch management at material level in our system, now we want to change to batch level from material level to plant level, what effects or risks it will bring during the process of conversion?
Thanks a lot
Zhongkai

Hi
check the following SAP help link it is very helpful:
http://help.sap.com/saphelp_40b/helpdata/es/d2/1d4b6e5733d1118b3f0060b03ca329/content.htm
at the link you can find the following
Specify batch level and activate status management
In this IMG activity, you specify the following:
the level at which batch numbers are unique
whether batch status management is active in the client
the plants in which batch status management is active
the initial status of new batches
Batch level
Batch numbers can be unique at the following levels:
at plant level
at material level
at client level for a material
If you choose plant level, the batch number is unique in conjunction with the respective material and the plant. If you choose material level, the batch number is unique together with the material. At client level, the batch number is unique in the whole client.
To change the batch level, you have to start a conversion program. This program first checks whether conversion is possible and outputs an error log containing all batch numbers that occur more than once at the new level. Now you need to manually transfer these batch records to numbers within Inventory Management using a transfer posting 'material to material'.
If you change the level from plant level to a higher level, it is possible that batches with the same batch numbers in different plants are actually identical. In this case, all you have to do is remove stocks (including previous period stocks) so that all batches with the same batch numbers, except one, can be reorganized.
When you convert from plant level to material level, the material is then to be handled in batches in all plants in which it is defined.
Standard settings
In the standard R/3 System, batches are unique at plant level.
Activities
To change the batch level, proceed as follows:
      1. Choose the level at which you want your batches to be unique.
      2. Save the new settings and choose Back.
      3. Select function Batch level -> Conversion.
      4. If necessary, carry out the conversion in test mode first.
Further notes
Note that you cannot reset conversion from plant level to a higher level in the standard.
If you create a client by copying an existing client, initially, there are no settings in the target client at batch level. The system makes the settings in the target client only when you have carried out an activity (maintaining master data or posting a goods movement, for example).
SETTINGS BEFORE/AFTER CLIENT COPY:
Source client Target client
Client level Material level
Material level Material level
Plant level Plant level
Batch status management
Batch status management is an additional function provided by the standard R/3 System.
Standard settings
Batch status management is not active in the standard R/3 system.
Activities
To activate batch status management, proceed as follows:
      1. Choose Batch status management active.
      2. Save the new setting and choose Back.
      3. Choose Batch status management -> conversion.
      4. If necessary, carry out the conversion in test mode first.
Further notes
Batch status management is linked to the batch level. At material and at plant level, the status management settings are valid within the client, that is for all plants. However, if you have defined batches to be unique at plant level, you have to select the plants in which status management is to be active using function Plants with status management.
If you activate status management, all existing batches are assigned status 'unrestricted'. If you deactivate status management, the systems transfers all restricted batches to unrestricted stock within conversion. Restricted stock only exists if status management is active.
If you create a client by copying an existing client, status management is automatically activated if batches exist in the target client, independent of the settings in the source client. If no batches exist in the target client, it is not activated. In this case, you have to activate or deactivate status management manually, if required.
Plants with batch status management
Activities
To select the plants in which status management is to be active, proceed as follows:
      1. Set characteristic Batch status management for those plants in which batch status management is to be active.
      2. Save your settings and choose function Back.
      3. Choose function Batch status management -> conversion
      4. If necessary, carry out the conversion in test mode first.
Initial status of a new batch
Using this function, you can specify for each material type which initial status new batches are to be assigned. However, if you use a quality management system, this specifies the status of the batches.
Hope it will help
Best Regards

Failed to start Admin Server for Weblogic Server Domain

I Created a domain named mydomain in weblogic server 10.3 in server 2003.But when i start Admin Server for Weblogic Server Domain from startmenu, it failed.
I examined the log under domains\mydomain\servers\AdminServer\logs\AdminServer.log and got the following information:
java.lang.NoClassDefFoundError:weblogic/ldap/EmbeddedLDAPChange
at weblogic.ldap.EntryChangeListenerImpl.receiveEntryChanges(EntryChangeListenerImpl.java:28)
Caused by :java.lang.ClassNotFoundException: weblogic.ldap.EmbeddedLDAPChange
at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
Caused by :java.util.zip.ZipException: error reading zip file
at java.util.zip.ZipFile.read(Native Method)
at java.util.zip.ZipFile.access$1200(ZipFile.java:29)
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attemping to load LDIF for provider RoleMapper from file ...\domains\mydomain\security\XACMLRoleMapperInit.ldift.
at ...(CommonSecurityServiceManagerDelegateImpl.java:465)
Caused by: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attemping to load LDIF for provider RoleMapper from file ...\domains\mydomain\security\XACMLRoleMapperInit.ldift.
at .. (ServiceEngineImpl.java:365)
Caused by: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attemping to load LDIF for provider RoleMapper from file ...\domains\mydomain\security\XACMLRoleMapperInit.ldift.
at .. (BootStrapServiceImpl.java:910)
Caused by: <openjpa-1.1.1-SNAPSHOT-r422266:891341 nofatal user error>kodo.jdo.UserException: This operation cannot be perfomed while a Transaction is active.
at org.apache.openjpa.kernel.BrokerImpl.close(BrokerImpl.java:4087)
####<Critical><WebLogicServer><SOA><Adminserver><main><<WLS Kernel>><><><1282012271468><BEA-000362><Server failed. Reason:
There are 1 nested errors:
weblogic.security.service.SecurityServiceRuntimeException: [Security:090399] Security Services Unavailable
at weblogic.security.service.CommonSecurityserviceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)
I ignored some detailed error message.The runtime environment is server 2003 Enterprise Edition sp2.
Thx in advance for any reply.

Hello Djam,
Please review the following:
The FMW WebLogic Server (WLS) installation has been configured to use a non-default Java temporary files directory,
i.e. the following has been set in the WebLogic startup or setDomainEnv.sh script:
EXTRA_JAVA_PROPERTIES="-Djava.io.tmpdir=/appl/oracle/temp_java_files ${EXTRA_JAVA_PROPERTIES}"
Reference: How to Change the WebLogic Server Location for Temporary Files (Doc ID 1336002.1)
When the Middleware home was restored the directory specified by java.io.tmpdir parameter was missing,
Therefore an IOException occurred when opening the wallet and WLS was unable to initialize the OPSS successfully.
To resolve the issue re-create the directory specified by the java.io.tmp dir parameter, and make sure the owner and group access are the same as for the FMW installation.
Unable Start AdminServer: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException (Doc ID 1923395.1)
Bogdan

HT201269 When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a serve

When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

[svn:bz-trunk] 19362: Increase the tests' timeout since it takes about 17 sec for JMS server to start up on some app servers .

Revision: 19362
Revision: 19362
Author: [email protected]
Date: 2010-12-14 08:16:35 -0800 (Tue, 14 Dec 2010)
Log Message:
Increase the tests' timeout since it takes about 17 sec for JMS server to start up on some app servers.
Modified Paths:
 blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/uuidgeneration/CustomUUIDGenerat orTest/simpleJMSMessagingTest.mxml
 blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/uuidgeneration/DuplicateUUIDTest /DuplicateUUIDTest1.mxml

check the server log;
/app/oracle/product/fwm11g/user_projects/domains/fwm_domain/servers/AdminServer/logs/AdminServer.log
you can launch the console and see if it is running; http://<server>:<port>/console

Weblogic Server Upgrade Installer

Hi ,
Can anybody help me How can i download weblogic Server Upgrade Installer
I want to upgrade weblogic10.3.5.0 to weblogic 12c
Thanks
Bhaskar

Hi,
http://docs.oracle.com/cd/E24329_01/doc.1211/e24492/prepare.htm#BABFIDAB
From the above link
WebLogic Server 12.1.1 is a new major release, there is no upgrade installer for this release
You Can follow this link,it has step wise details
http://docs.oracle.com/cd/E24329_01/web.1211/e24497/upgrade_dom.htm#i1072877
Prior u need to install weblogic 12.1.1.0,and take backup of your existing domain.
Choose the Domain Upgrade Wizard option from the Oracle program group in the Windows Start Menu by clicking Programs > Oracle WebLogic > WebLogic Server 12c > Tools > Domain Upgrade Wizard.
Regards
Fabian

No login command was found for 'WebLogic Server 10.3.5.0 - in managed serve

i am getting following warning when i run my web logic managed server
No login command was found for 'WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 Oracle WebLogic Server Module Dependencies 10.3 Thu Mar 3 14:37:52 PST 2011 Oracle WebLogic Server on JRockit Virtual Edition Module Dependencies 10.3 Thu Feb 3 1.
Would appreciate suggestions to resolve.
Thanks.

Hi,
Add -Dweblogic.StdoutDebugEnabled flag while starting the managed server and then post the verbose error message in your next post
For setting the flag follow the below steps
If your using Linux box and not using node manager to start the managed server,add the below line startManagedWebLogic.sh file
JAVA_OPTIONS="-Dweblogic.StdoutDebugEnabled=true ${JAVA_OPTIONS}"
echo "JAVA_OPTIONS=${JAVA_OPTIONS}"
If your using Windows box and not using node manager to start the managed server,add the below line startManagedWebLogic.cmd file
set JAVA_OPTIONS=-Dweblogic.StdoutDebugEnabled=true %JAVA_OPTIONS%
echo JAVA_OPTIONS=%JAVA_OPTIONS%
If you are starting the Managed server through the node manager then use these flags From Admin console : servers >>>. MS1 >>>> server start >>>> Arguments :-Dweblogic.StdoutDebugEnabled=true
Regards,
Fabian

Need the link for weblogic 64bit for windows7

Hello.
I'm planning to install fusion middleware 11g 64 bit on my new PC with windows 7 64bit.
After I surfed oracle website, I couldn't find the link for weblogic 10.3.2 for 64 bit windows. I read that it's inside the generic one. But for the generic and inside the documentation we can see that is related only to unix.
Can somebody help plz ?
Thanks,
Joe

Hi
I have windows 7 64 bit. ( I knew that the 64 bit is not yet certified for Oracle Fusion Middleware 11g : http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html)
I need to install the weblogic server and Oracle Fusion Middleware 11g.
Any directions about the correct versions and (32/64) bit will be much appreciated.
I tired the version 11.1.1.2 (x86-64) after successfull insallation of weblogic server JDK 64 bit (I passed the right parameters). When installing the 11.1.1.2, it comes to a stage and sleeps even I left my laptop for 1 hour after the sleeping stage but nothing happened.
Shall I install the weblogic server JDK 32 bit, and try the 11.1.1.2 x86 only ?
Any help will be much valuable ..
Thanks,,,
Joe

How to run FVC utility for Weblogic server?

Hi all,
I want to use FVC(Form Version Controller) utility to update the database for some users.
I have provided the required parameters in the "fvc.properties".
When i run the utility from command prompt it is just printing the parameters given in the fvc properties file and the execution stops.
When i check the database nothing is updated.
I'm using BEA-Weblogic Version 8.1 as application server.
But in another environment where I'm using OC4J as application server I'm able to run the FVC utility and it is also updating the database.
Is there any other steps that we have to follow ,if we want to use this utility for Weblogic?
Thanks.

Hi,
The following is script found in fvcutil.cmd
@echo off
setlocal
if "%1" == "" goto usage
if "%2" == "" goto usage
call classpath
set CLASSPATH=%CLASSPATH%;.\lib\xlFvcUtil.jar;.\ext\jbossall-client.jar;.\ext\weblogic.jar;.\ext\oscache.jar;.\ext\javagroups-all.jar;.\ext\commons-logging.jar
D:\oracle_dev_design/xlclient/java\bin\java -DXL.FvcProps=fvc.properties -DXL.HomeDir=. -Djava.security.auth.login.config=.\config\authwl.conf com.thortech.xl.util.fvcutil.FVCUtil %1 %2
goto end
:usage
echo.
echo "USAGE : fvcutil.cmd <USERNAME> <PASSWORD>"
echo.
:end
endlocal
authwl is set properly. But when we run this command we get only parameters given in the fvc property file.
But when we run the same in another environment using (OC4J Application server) we are able to update the database using fvc.
Please guide us out on this regard to execute the same in weblogic server enabled environment.
Thanks

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

Cisco TCS "the overview for this server cannot be found"

Hi,
I have a problem on my TCS server, a message is displayed "The overview for this server can not be found"
This error message appears when I last reinstalling the usb image provided by Cisco,
Thank's
Billel

Hello Billel -
I presume because you mention USB image, you're running a 3rd generation TCS appliance?
Have you tried to repair the TCS application through Add/Remove Programs to see if that resolves the issue? I've had that issue myself once on a 2nd Generation TCS appliance, I tried a repair and uninstall/reinstall of the TCS application, eventually managed to get it back up and running, though I don't recall my actual steps.
Also just in case, because you did a reimage, did you back up the serial number, checksup, and release/option keys from the registry located in HKLM > SOFTWARE > Wow6432Node > TANDBERG > TCS. If you're missing any of that, you can obtain release and options keys from Cisco License Portal, select "Get Other Licenses", then "TelePresence Licenses to Resend". You can get the checksum by contact TAC.

What are the steps for loading master data

Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
Evion

Hi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S

The certificate for this server is invalid

Hi can anyone help? I get a message "cannot connect to iTunes Store" when selecting App Store on my iPod. Also if I try iTunes icon, I get "the certificate for this server is invalid. You might be connecting to a server that is pretending to be "itunes.apple.com" which could put your confidential information at risk"
The steps I have taken so far, - connected to PC and updated software to iOS 6.1.3 (worked fine on PC)
Checked WiFi connection (fine)
Checked other apple products are working fine (yes)
Checked i am logged into apple id (yes)
Is there anything else I'm missing ??
Thanks aliian

Thanks to those contributing this fix -- had this issue on my son's iPad mini and was going crazy trying to figure it out!!
To answer the question of why this causes an issue: this is part of the standard security features of the internet - when you connect securely to a server (as the i-devices do when accessing itunes), it has an SSL Certificate which has an expiry date on it -- the device checks the certificate to try and make sure you aren't getting duped by an out of date certificate, and if your date is set too far in the future (my son's was in 2019!) then it looks like the expiry date is in the past and it won't let you connect..
Cheers!

How to increase the performance of Weblogic server 7.0?

How to increase the performance of Weblogic server 7.0 ?
also, how do i avoid typing the server login and password evertime I start the
webserver?

How to increase the performance of Weblogic server 7.0 ?It depends on what is not running fast enough for you.
also, how do i avoid typing the server login and password evertime I
start the webserver?In the startWebLogic shell script (.cmd or .sh) add:
set WLS_USER=weblogic
set WLS_PW=password
(Replace "password" with whatever your password is.)
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com/coherence.jsp
Tangosol Coherence: Clustered Replicated Cache for Weblogic
"winston" <[email protected]> wrote in message
news:3fe42d33$[email protected]..
>

Oracle BI 11g: Error at the step - "Creating BI Server System Components"

I am attempting to install Oracle BI 11g on a Windows VM. The installation process completes successfully. However, the configuration process errors out at the step - Creating BI Server System Components. The last entry in the install log is as below:
[2010-09-24T18:26:12.107+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 26] [ecid: 0000Ih3l5E00vlx6wBedMG1Cb79200000H,0] Install handler params :-componentName coreapplication_obis1 -componentType OracleBIServerComponent -biApplicationName coreapplication -fmwConfigPath C:\Middleware\user_projects\domains\bifoundation_domain\config\fmwconfig -appServerUsername <Secure value. Cannot be logged> -appServerPassword <Secure value. Cannot be logged> -appServerAdminPort 7001 -appServerManagedPort 9704 -systemAdministratorUsername <Secure value. Cannot be logged> -systemAdministratorPassword <Secure value. Cannot be logged> -repositoryPassword <Secure value. Cannot be logged> -biServerRepositoryFile SampleAppLite.rpd -biPresentationServicesCatalogName SampleAppLite -biPresentationServicesCatalogZipFileName SampleAppLiteCatalog.zip -biSchedulerSchemaUser <Secure value. Cannot be logged> -biSchedulerSchemaPassword <Secure value. Cannot be logged> -actionFrameworkWorkflowServer http://host-name:7001 -actionFrameworkWorkflowService ANALYTICS -actionFrameworkWorkflowSystem obiaftests -databaseType Microsoft SQL Server -connectString sqlservername:port:db -autoCreatePorts -biServerPort 9703 -biServerMonitorPort 9701 -biPresentationServerPort 9710 -biClusterControllerPort 9706 -biClusterControllerMonitorPort 9700 -biJavaHostPort 9810 -biSchedulerPort 9705 -biSchedulerMonitorPort 9708 -biSchedulerScriptRPCPort 9707 -portRangeStart 9700 -portRangeEnd 10000 -skipDomainProvisioning true
The resource utilization seems to be normal. Netstat confirms that all of the above ports are free. Since there is no explicit error message in the log, we are unable to decipher the exact source for this error.
Virtual Machine details: Intel Xeon @ 2.67 GHz, Windows Server 2003 SP2, 4GB RAM, 50GB HDD, Static IP
Oracle BI Schema DB: MS SQL Server
Any inputs on this error will be greatly appreciated.
Edited by: OBIGuy on Sep 27, 2010 2:37 PM

Hi,
I recenty started instaling OBIEE 11g and got the same error : "Creating BI server system components". I read your solution and would like to know that if this patch is okay to install on a Windows VM (win server 2003 EE, SP2). If yes, after rebooting, do we reinstall ?
I am also getting the following errors:
-Executing: opmnctl start coreapplication_obiccs1
-Executing: opmnctl start coreapplication_obis1
-Executing: opmnctl start coreapplication_obips1
-Executing: opmnctl start coreapplication_obisch1
Thanks in advance.
HG

Query about the steps for Weblogic Server Upgrade from 8.1 to 10.3

Similar Messages

Maybe you are looking for