Query about vWLC's limitation of not supporting Local mode APs

Hi,
I was reading about virtual WLCs and came to know about the limitation that vWLCs don't support APs in local mode. I have few queries about the limitation,
Is this limitation to ensure that all the traffic is not tunneled back to the vWLC and in effect, the ESXi host and not to create a bottleneck?
I was wondering if I can use a vWLC (installed at local site) for our smaller branch offices, say with 10-15 APs, with central switching and central auth rather than having a hardware WLC? Is it supported? Will it logically behave as local mode or would it choke the network by tunneling all the traffic back to the ESxi host? Would there be any impact for the end users? Or should I use vWLC with local switching central auth?
Thanks,
Utkarsh

Hi,
FlexConnect Mode: Central and Local Switching. Only FlexConnect Central and Local Switching APs are supported, Local Mode AP will only join the controller but will not associate the clients.
So once AP joins the controller we can change the mode from Local mode to Flexconnect mode.

Similar Messages

  • Error : Your CPU does not support long mode. Use a 32bit distribution

    Hi
    I was trying to Install Oracle Enterprise Linux on VM ware version 6.
    My hardware is Intel 32 bit.
    However while booting from the DVD im getting an error as "Your CPU does not support long mode. Use a 32bit distribution."
    Please Advise
    Thanks

    I had learned that the free DVD sets that Oracle ships are always for 64-bit systems. Owners of 32-bit systems will have to either download from http://edelivery.oracle.com or copy a distribution DVD from a friend. The 32-bit media can also be ordered from the http://oraclestore.oracle.com site for about $20USD.
    Sorry for any confusion this may have caused.

  • Hostapd rt2800pci «Hardware does not support configured mode»

    Hello
    I am trying to use my fit-pc as a wifi access point. Here is wat lspci says about my wireless card:
    lspci |grep Wireless
    03:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe
    It seems to be possible through with the mac80211 driver ( http://wireless.kernel.org/en/users/Drivers/rt2800pci )
    In my hostapd.conf tell hostapd.conf to use nl80211.
    Still when I do : #hostapd /etc/hostapd/hostapd.conf
    I've got this message :
    "Configuration file: /etc/hostapd/hostapd.conf
    Hardware does not support configured mode
    wlan0: IEEE 802.11 Hardware does not support configured mode (2)
    Could not select hw_mode and channel. (-1)
    wlan0: Unable to setup interface.
    rmdir[ctrl_interface]: No such file or directory
    zsh: exit 1     hostapd /etc/hostapd/hostapd.conf
    Someone know if there is a particual configuration to use rt2800pci?

    I had learned that the free DVD sets that Oracle ships are always for 64-bit systems. Owners of 32-bit systems will have to either download from http://edelivery.oracle.com or copy a distribution DVD from a friend. The 32-bit media can also be ordered from the http://oraclestore.oracle.com site for about $20USD.
    Sorry for any confusion this may have caused.

  • X does not support locale

    Hellow, i setup SGD 4.2, but when i start an application or object manager via ttwebtop locally on the server. I get this error messages everytime after starting:
    /opt/tarantella/bin/ttwebtop -url http://localhost/tarantella.
    bash-2.05# /opt/tarantella/bin/ttwebtop
    X does not support locale
    Cannot set input modifiers
    Warning: locale not supported by Xlib, locale set to C
    Warning: X locale modifiers not supported, using default
    Warning: Cannot convert string "-dt-interface system-medium-r-normal-m*-*-*-*-*-*-*-*-*" to type FontSet
    Warning: Unable to load any usable fontset
    Warning: Cannot convert string "-dt-interface system-medium-r-normal-m*-*-*-*-*-*-*-*-*" to type FontList
    Warning: Cannot convert string "-dt-interface system-medium-r-normal-m*-*-*-*-*-*-*-*-*:" to type FontList
    Warning: Cannot convert string "-dt-interface user-medium-r-normal-m*-*-*-*-*-*-*-*-*" to type FontSet
    Warning: Unable to load any usable fontset
    Warning: Cannot convert string "-dt-interface user-medium-r-normal-m*-*-*-*-*-*-*-*-*" to type FontList
    Warning: Cannot convert string "-dt-interface user-medium-r-normal-m*-*-*-*-*-*-*-*-*:" to type FontList
    bash-2.05#
    Can anyone help me.
    Extra input:
    Solaris 9/05 SPARC
    THX

    Did you ever get this working?

  • Getting error:- Your CPU does not support long mode. Use a 32bit distribution--? on OEL 64 bit host for OEL 64 bitguest

    Getting error:- Your CPU does not support long mode. Use a 32bit distribution--?
    I am using entire Oracle Stack..OEL, ORACLE VBOX
    Trying to install guest OEL 5.6 x86-64 bit on virtualbox 4.3 on a (Dell 2950 Server with host OS OEL 5.6  x86-64 bit) .
    and it complains of -->Your CPU does not support long mode. Use a 32bit distribution
    I am struck and unsure how to proceed . I appreciate any help regarding this.
    I enabled the VT (Virtualization Technology) option in the BIOS and then gave it a try. Does not work?

    Hi
    Looks like the 64 Bit operating system is not supported. Enable the VT (Virtualization Technology) option in the BIOS and then give a try again.
    Edited by: 891882 on Oct 28, 2011 1:21 PM

  • Mac mini on a LCD TV which does not support interlace mode

    Dear all,
    I am going to buy a new Mac mini and I wish to connect it to a Samsung LCD TV 37A656A1F (serie 6.
    The TV manual says that it does not support the interlace mode. I then deduce that it supports progressive mode only.
    My question: Does it mean that this LCD TV model cannot be used as a monitor for a Mac mini?
    Please give a help to me

    All computer monitors are progressive mode displays. Therefore all computers, including the mini, are very comfortable running progressive mode. It is their natural state. It is more a problem when a computer has to run interlace mode in order to support a display. That is when there is trouble. So I think you have nothing to worry about if your Samsung runs in progressive mode.

  • Oracle supporter tell me JSF not support edit mode

    so I use jsf build a portlet ,I want to add a edit mode when I click edit button from portlet title bar ,but if I click the button then error show me,about can't get jsfcontext and so on
    oracle's supporter tell me the JSF can't support edit mode,you can use jpf or jsp instead jsf
    so if you want use the edit mode ,you can use jpf or jsp,I have been used jpf replace jsf, is run ok

    I don't know that you'll find any that support 7. Here's where the other versions can be found. Looking quickly at the guides, Oracle DBs' supported started at 9i. I thought some had used 1.54 with 8 but I can't remember where I saw that.
    http://www.oracle.com/technology/software/products/sql/index.html
    Evita

  • My iPhone 4 does not support local SIM like STC or Mobily in Saudi Arabia?

    My iPhone 4 does not support STC or Mobily SIM in Saudi Arabia. I bougt it from USA. After inserting SIM it does not show up network signal bars.
    i mean it does not work. Is it Lock and unlock issues?  Mobile Details: Version 4.3.3.(8J2) Carrier: AT&T 10.0 Model: MC319LL  
    Answer email me pl [email protected]

    did you 3 finger zoom it?
    http://www.everythingicafe.com/forum/threads/help-my-3gs-is-stuck-on-zoom.46739/

  • Bridge mode not supported for lap1261N

    Hello,
    I have a WLC2504 and 2 LAP1261N (converted from autonomous to lightweight) with release 7.0.116.0 and I want to create a point-to-point mesh link between the 2 APs. When trying to change the APs mode from local to bridge I receive the message "This AP does not support bridge mode" even if the release notes say that mesh is supported on AP1261N. I tried to change the mode from gui and also from CLI. Any suggestion?
    Thanks,
    Paolo

    in aIOS you can tell it to bridge on the 2.4GHz Radio, it's not ideal but it can be done.
    for WLC based:
    The Cisco 1130 and 1240 ( all indoor AP ) are equipped with the following two simultaneously operating radios:
    •2.4-GHz radio used for client access
    •5-GHz radio used for data backhaul
    The 5-GHz radio supports the 5.15 GHz, 5.25 GHz, 5.47, and 5.8 GHz bands.
    http://www.cisco.com/en/US/docs/wireless/technology/mesh/7.0/design/guide/MeshAP_70.html
    HTH,
    Steve
    Please remember to rate useful posts, and mark questions as answered

  • OC4J support local ejb?

    It seems OC4J does not support local ELB, as it complains the local-home tag with session tag.

    Hi Patrick,
    As far as I know, OC4J only partially implements EJB 2.0 -- it
    doesn't implement local interfaces. However, there are several,
    different versions available. Which version are you using?
    If you haven't already found it, there is a version of the pet
    store application available for download from:
    http://technet.oracle.com/sample_code/tech/java/oc4j/content.html
    but it's an implementation of the 1.1.2 version.
    Hope this helps,
    Avi.

  • Workflow manager 1.0 : runtime error 400 running Add-WFHost "The api-version in the query string is not supported"

    Installing Workflow Manager 1.0 for SharePoint Server 2013 SP1 everything is fine until the last step of the configuration and last powershell command : 
    Add-WFHost -WFFarmDBConnectionString 'myconnectionstring' -RunAsPassword $WFRunAsPassword -EnableFirewallRules $true -SBClientConfiguration $SBClientConfiguration -CertificateAutoGenerationKey $WFCertAutoGenerationKey -Verbose;
    gives me the following error : 
    Add-WFHost : The remote server returned an error: (400) Bad Request. The api-version in the query string is not supported. Either remove it from the Uri or use one of '2012-03'..TrackingId:412684e3-3539-468e-91e6-17838c6eaa55_GS
    P,TimeStamp:04/04/2014 12:54:11
    At line:1 char:1
    Can't find anything about this subject except this
    thread which does not help me that much in SharePoint dev env ...
    Removing workflow manager 1.0 and service bus (leave the farm using wizzard, remove binaries and databases) does not help.
    Who already faces this issue and how can I try to resolve it ?
    Best regards !
    Alexandre DAVID

    The API version is hardcoded in Microsoft.ServiceBus.dll, which ships as part of the Service Bus. Each version of this lib has a different string.
    If you install workflow manager 1.0, here are the pre-requisites:
    .NET Framework 4 Platform Update 3 or .NET Framework 4.5
    Service Bus 1.0
    Workflow Client 1.0
    PowerShell 3.0
    The following are the pre-requisites to configure Workflow Manager 1.0
    Instance of SQL Server 2008 R2 SP1, SQL Server Express 2008 R2 SP1, or SQL Server 2012.
    TCP/IP connections or named pipes must be configured in SQL Server.
    Windows Firewall must be enabled. [Windows Firewall is Off on target server]
    Ports 12290 and 12291 must be available.
    Here are the reference for installing and configuring Workflow Manager 1.0:
    http://lennytech.wordpress.com/2013/06/02/installing-workflow-manager-1-0/
    http://lennytech.wordpress.com/2013/06/02/configuring-workflow-manager-1-0/
    http://social.technet.microsoft.com/Forums/en-US/c74507fb-ac2d-405f-b19c-2712b1055708/workflow-manager-10-configuration-service-bus-for-windows-server-the-api-version-is-not?forum=sharepointadmin

  • In Bex Query designer - Flat is not supported

    Hi all,
    In Bex query designer,
    While execution of the query, the following error is coming .
    Failed to process request; contact your system administrator
    Error Summary
    Exception occured while processing the current request; this exception cannot be handled by the application or framework
    If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
    To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
    Root Cause
    The initial exception that caused the request to fail was:
    Flat mode is not supported!
    java.lang.UnsupportedOperationException: Flat mode is not supported!
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.Characteristic.setHierarchy(Characteristic.java:330)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.Characteristic.readStateFromDomNode(Characteristic.java:542)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QvCharacteristic.readStateFromDomNode(QvCharacteristic.java:379)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QvStructure.readStateFromDomNode(QvStructure.java:106)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.AttributeContainer.readStateFromDom(AttributeContainer.java:297)
    Details: Full Exception Chain
    Most important error.
    regards
    Selvan

    Hello,
    I have the same problem with Flat mode is not supported! at ... Characteristic.setHierarchy(Characteristic.java:335):
    Open, close, reload of the query does not help.
    Other SDN-thread "500 Internal Sever - Flat Mode is not Supported!" related to transaction RSRT.
    Execution of query via RSRT works, but the problem still persists in the BEx Web Analyzer.
    Could be related to a BEx Web Analyzer "bookmark" ("Personalize Web Application").
    I have not deleted any item. We use SAP BW 7.0 with a patch level approx. 09.2009.
    The "flat-mode" seems to be the  "BEx table mode".
    SAP hints do not seem to fit here:
    - 715820 BW 3.x Front-End Patch 14 (we use BW 7.0)
    - 874825 SAPBWNews for BW 3.x Front-End Support Package 19
    - 874827 SAPBWNews for BW 3.5 Front-End Patch 08 (we use BW 7.0)
    - 905229 update to SAPTableTree
    - 909824 Termination in flat mode when an object is deleted (old?)
    - 909827 Incorrect InfoProvider-dependent characteristic values
    - 910602 Condition includes too many characteristics (usage of deleted elements)
    - 915215 Termination when a query definition is changed (old? visibility of elements?)
    - 968273 Cache with flat files: Exception is not caught (does not apply to given error)
    Any new solutions?
    Best regards
    Thomas

  • Datatype : 25 not supported error while saving Logical Query in BIP Dataset

    Hi All,
    I have created a nested logical Query in OBIEE Publisher Datamodel using parameters.
    Here is the simple query :
    Select name, revenue, date from
    select "SubjectAreaName"."TableName"."Name" name,
    case when :Date > date '2012-01-01' then "SubjectAreaName"."TableName"."Revenue" else NULL end Revenue,
    date date
    from
    "SubjectAreaName"
    where
    date = :Date
    ) T1
    Note - :Date is the parameter. When I try saving this dataset as-is, it throws me Datatype : 25 not supported error. But, when i replace the parameter :Date with actual date, then the query works. Also, the inner query works with or without parameters. The issue arises when I use the outer query and the parameters.
    Please let me know if you have come across such a problem ?
    Any help on this regard would be highly appreciated.
    Thanks
    Swarna

    ya i can understand we wont do the sql logic at the data model part as some time performance issue may come when comparaed to sql run in package and sql running in data model . so i have mostly done using package and i will just do select * from table in the data set of data model so i didn't face any issue's like this .
    once check this tutorial may be you already
    i use to create parameters like this i didn't face any issue
    SELECT * from TEST where ID=:p_id
    http://st-curriculum.oracle.com/obe/fmw/bi/bip/bip11g/gettingstarted/gettingstarted.htm

  • I just got a notice to update my firefox to 4.0 and when I downloaded the new software it indicated: that I can't open the application "Firefox" because it is not supported on this architecture. Any ideas about what might be wrong and how to fix it?

    I just got a notice to update my firefox to 4.0 and when I downloaded the new software it indicated: that I can't open the application "Firefox" because it is not supported on this architecture. Any ideas about what might be wrong and how to fix it?

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

  • When I try to connect the Air with my iPhone to create an Hotspot, it drops the connection and gives an error message in the iPhone saying that the device (MacBook Air) is not supported. What can i do about it?

    When I try to connect the Air with my iPhone to create an Hotspot, it drops the connection and gives an error message in the iPhone saying that the device (MacBook Air) is not supported. What can i do about it?

    The problem has been fixed with the most recent OS X software update.

Maybe you are looking for