Query Builder access for end users
Hi,
I have a group of users who would like to have 'Query Builder' access.
Is it possible to directly access query builder without actually login-in into application builder.
Thanks in advance
Aali
No, but you could build a form to mimic it... Check out this thread from a few days ago: Query Builder functionality
Thank you,
Tony Miller
Webster, TX
On the road of life...There are 'windshields', and there are 'bugs'
(splat!)
"Squeegees Wanted"
If this question is answered, please mark the thread as closed and assign points where earned..
Similar Messages
-
I am using a Mac and have installed Adobe Reader for Mac, latest version. I cannot access the End User Licensing Agreement. I clicked on it and it gives me a message that I must launch Adobe, check that I agree, close and reopen. The problem is I can't find any way to launch Adobe because it appears nowhere on my launch pad, nor in my document files or on the control panel. Because of this, I cannot print bank statements nor can I get into my insurance companies billing department to make a payment. HELP!
How about in your Applications folder?
-
Is there an API for querying UCM v8.x End Users?
I am trying to find out what APIs might be available for an IVR application to query the list of end users configured on the UCM.
This would be for an auto-attendant type app which would be trying to route calls to specific users, so it would need at minimum a destination phone number to transfer the caller to.
Any pointers to documentation would be appreciated.
Thanks,
Bob Kmak
ConvergysHi Bob
You'd be looking at AXL. Documentation is at developer.cisco.com, log in and from the 'select an API/SDK' box selected Cisco Unified CM Administration XML.
You can use the API to pull specific XML objects containing all user properties (or lists of XML objects in newer CUCMs), or just do quick DB reads (for example 'select * from enduser') and then do what you will with the results.
Regards
Aaron
Please rate helpful posts.. -
BI Webtemplate access to End user.
Dear All,
My BI team asked me the answer for this scenario. They have to give the webtemplate (created/executed by BI) URL to end user access. Please advise me what are all the access need for end user. What kind of the access we have to give to the end user and tell me about configuration part of the BASIS consultant.
Thanks for your help.
Regards,
Senthil Kumar.CPrabodh wrote:
You should always state the Apex version. And this case, because this is related to authentication, the Authentication scheme you are using.
Assuming that you are using the Apex Built-in Auth scheme, you can achieve this by using User Groups feature and the APEX_UTIL.CURRENT_USER_IN_GROUP API.
Here are the high level steps:
a. Apex Builder > Administration > Manage Users and Groups
b. Create 2 users UAT1 and UAT2
c. Create 2 Groups UAT1Group and UAT2 Group
d. Assign UAT1 user to UAT1Group and UAT2 to UAT2Group
e. On the Home page of both the applications create a "Before Page Header" Branch that goes back to the Login Page. Make this branch conditional.This does not work, because in APEX you can go into any page after login bypassing the home page (like this http://apex.oracle.com/pls/apex/f?p=46417:9 where 9 is not home page)
So this branch will not run.
f. In "A" application you want only UAT1 to access , so use PL/SQL Expression type of condition in the above created branch that has the following code
return NOT APEX_UTIL.CURRENT_USER_IN_GROUP('UAT1Group')So the user UAT1 will return False and the branch will not execute, but for others it will return True and send the user to Login page, which is access denied.
Similarly, make the branch in B application condition for UAT2Group.
Regards, -
Page customization for end user
is it possible to use other mechanism for end users to customize their own pages instead using the portal features since it's a little complicated cause each user needs to create new pages, add portlet, etc.
Can we use the mechanism like my cnn, my yahoo,excite and how to do that in a simple way?
thanks for helpingHi,
I have the same question, but I would like to have a seperate page or application, showing only predetermined portlets, for users to choose from and place on their page. I do not want the end user to ever see the customization process Oracle uses. Can this be done???
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Karthika Siva ([email protected]):
A simple way to do this:
1. Create a page that will become the default page for end users. This page will have your branded look & feel (style) and contain a default set of portlets. These are portlets that you think your typical user will find useful.
2. Create portal user.
3. Grant one of the following privileges on the page to the user. Grant 'Full Customization' or 'Add Only Customization' depending on how much control you want to give the end user. Keep in mind that both of these privileges allow the end user to only customize their PRIVATE VERSION of the page. Others will see the default, or their own version if they have also personalized it. See the online help on the Access tab of the Customize Page screen for a description of the privileges.
4. Once that is done, set this page as the default home page for the user. You can do this using the Preferences tab on the edit user screen.
Now the portal user can log into the portal, and personalize his/her page by customizing portlets on the page, hiding/showing default portlets, and even adding other portlets to the page.<HR></BLOCKQUOTE>
null -
Utilizing the Workspace for end users
Trying to see how can I utilize the existing workspace for "end users" who are supposed to access the application, I have two questions:
1- How to remove the extra regions, logos and etc.
2- How to add link to the application
Thanks,
MehrI'm not clear on your question, but I'm going to take a wild stab in the dark and think you would like to customise the workspace login
http://www.grassroots-oracle.com/2013/02/modifying-apex-workspace-login-page.html
Why not provide them the appropriate URL in the first place? -
I have a requirement to restrict the access of "InPlaceRecordsListSettings.aspx" and "InPlaceRecordsSettings.aspx" pages for some of the users and allow the access for some of the users.
I have applied the below code on the web.config file but this modification impacting only on the web application level not on the site collection and sub site level.
<location path="_layouts/15/InPlaceRecordsSettings.aspx">
<system.web>
<authorization>
<deny users="*" />
</authorization>
</system.web>
</location>
<location path="_layouts/15/InPlaceRecordsListSettings.aspx">
<system.web>
<authorization>
<deny users="*" />
</authorization>
</system.web>
</location>
When I tried the access on
:<portno>/sites/<scname>/_layouts/15/InPlaceRecordsSettings.aspx">http://<servername>:<portno>/sites/<scname>/_layouts/15/InPlaceRecordsSettings.aspx page allowed the access for all users.
Please suggest the possible solution to restrict the access of "InPlaceRecordsListSettings.aspx" and "InPlaceRecordsSettings.aspx" pages on SharePoint2013.
Thanks
RamasubbuYou can't do it from OOTB.
_layout folder is accessible to the users if they have read access in any of the site even subsite.
You can modify *.aspx file, add your custom control which will check user.
[custom.development] -
HELP needed on Remote Management set to allow access for all users
my mac mini snow leopard server runs in a data center and i use screen sharing to interact with it. i played with the sharing settings remotely yesterday and changed "allow access for" to all users. i was disconnected immediately and i couldn't logon again. i have no luck changing to other users. i don't want to make a special trip to the center to change it back to whatever it used to be. i can still use afp to connect but the screen sharing option is no longer available. what does "allow access for all users" mean anyway?
thanks!As its name implies, allow access for all should allow any valid user account to access the server. I'm not sure why it's no longer working. It almost sounds like the ARDAgent crashed.
Either way there's a command-line interface to the ARD preferences:
/System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/ki ckstart
man kickstart discusses the options, including examples of how to enable access for specific users. -
After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.
We've had several instances where we have had to run chkdsk on arrays with over 1m files. Average completion time is approximately 72 hours. The maximum downtime window they have available is the 64 hour weekend window. File sizes and number of files were
much smaller then than they are now.
The idea, in theory, was to use VHDs to compartmentalize the data into smaller volumes which could be more easily managed. It would also improve performance when transferring these compartments of data as they would use sequential read/write rather than
fragmented/random. This idea was never fleshed out in entirety, they don't split data up into little containers, but simply into big ones per project. Hence the 11m files in one container that I am currently trying to diagnose.
Some other important facts: The VHD in question is mounted in B:/project/ as this server also allows remote workers to log in, but they are restricted to see only data in E:. Disks A-D are hidden via group policy.
Update: icacls is failing on a large number of files within this dataset. I counted the path characters to ensure it wasn't the 255 character limit I was encountering and verified that the paths being blocked are only about 150 characters long. Once it finishes,
I'll have to try taking ownership and then re-running it. At this point I still have no idea how long to expect. I'm running out of time as the environment will be in use again at 9AM tomorrow morning. -
Giving Access for an User On One Schema.
Hi all,
I want to give read,write and execute access for an user in one schema and only read access to another two users.
How can I give..Please suggest.Hi,
Well in that case you may have to give the select privilege to a particular user for all tables.
Or
You may like to create two roles, and give select privilege to a particular role for all tables. And give write i.e. insert/update privilege to the other role. Then assign this role to the user whom you like to give the access.
Regards
Anurag Tibrewal. -
Recording NWBC scripts for End User Experience
Hi Experts,
I am recording NWBC scripts using the Netweaver Business Client GUI for loading and running it through Robots for End User Experience Monitoring. I don't see an option to "LogOff" in NWBC client while recording the script. We only have option to "Close all session and LogOff" in NWBC client .
When I am using this option, it closes all the sessions including the EEM Recorder also without saving the recording .
I need to include "LogOff" as the last step so that it doesn't leave any active sessions for each run by different robots.
I have a Solution Manager 7.1 SP10 and NWBC client 3.5 Patch 13.
Please help me achieve this.
Regards,
Manish KHi,
for a browser the recommendation is to open a new, empty tab to keep the browser alive while closing the tab with the session. All that with the hope that the backend will use the triggered event of collapsing tab to close session.
Maybe a similar strategy works for NWBC.. but I don't know the UI in detail. -
Reset passwork for end user using XE version 2.1.0.00.39
Hi All,
I would like to create a link "Change Password" for end users to able to change their password anytime. I've followed the link below
Self Reset Password
but it still require the admin login before end users can change their password.
The following steps that I did:
1. Under "Shared Components", create a Navigation Bar entry name "Change Password".
2. On page 1, click on the "Change Password" link under Navigation Bar and entered
Target Type = URL
URL Target = javascript:popupURL('f?p=4350:53:&SESSION.:::53.F4350_P53_USER_NAME::APP_USER');
How do i make the "Change password" link go directly to reset password page after end users clicked on it without admin login require? I'm using a default authentication and all end users assigned to user group.
Thanks in advance,
KevinKevin,
You want the users to go to popup page 58 (in application 4350). See this thread: Re: Pop Up Change Password Window . But I don't know if that will work in 2.1.
In general, you're better off using other types of account management tools such as LDAP.
Scott -
Afternoon all, i've recently installed cProjects as a add on to a WEBAS system, i'm after some useful links/information about how to use the product at all, as i've no real experience of it.
Any help would be much appreciated, the SAP guides don't seem to be suited for end users thats all....Hello James,
From your post I cannot make out which release of cProjects have you installed (3.1 or 4.0). Any way pl find below the links to the help.sap.com portal which is a detailed guide to cProjects Suite.
cProjects Suite 3.1
http://help.sap.com/saphelp_cpro31/helpdata/en/home.htm
cProjects Suite 4.0
http://help.sap.com/saphelp_ppm400/helpdata/en/index.htm
Hope this helps.
Rgds
Deepak -
SCSM 2012 SSP Permission for End users
Hello Experts,
I have an issues with SSP - SCSM 2012 SP1.
As an admin user, I can see theOfferings, see the pending requests, can see the requests I have submitted, Approve them etc. But when I am an end user, browsing from my laptop, I see a blank Home page. I dont see the Service offerings in the
homepage..even I dont see the Need Help? text. What is the issue? FYI : Silver light is already installed on my laptop.
Interestingly, I see the Need Help? text with the same end user credential when I am opening the browser inside the server wher SSP is installed.
But, in both the cases, whether I browse in the server or from my laptop, I dont see the service offerings anywhere when i am an end user. I followed the below article..but no success.. :(
http://systemcentertech.com/2012/06/28/scsm-2012-portal-service-catalog-empty-for-end-users/
Please help...
Thanks!
ThanksHi,
Did you add the Service Offerings and Request Offerings to the Catalog Group? Here is another good blog on this you can reference:
http://www.concurrency.com/blog/scsmportalpermisions/
My Blog | www.buchatech.com | www.systemcenterportal.com
If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion
in a test environment before implementing! -
Restricting Access for SQ01 User Group
Hi ,
Please let me how to Restrict Access for a User Group to only some of the specific users?
Thank you
Edited by: Vibhor Arora on Apr 12, 2010 7:29 AMHi,
Can you please clarify what exactly you want to know, your request can be interpreted in a few different ways.
If you are concerned that people have access to all user groups, then you need to remove access to S_QUERY activity 02 and I think activity 23. They will lose access to all user groups that they are not assigned to via SQ03.
Maybe you are looking for
-
should have typed in here...
-
My ipod touch 3rd gen is disabled how do I restore it
I have an Ipod touch 3rd generation and its disabled and it says try again in 23 million mins how do i fix it?
-
How to save and download json to make use of a app in offline mode
how to download and save a json file from url to make use of a app in offline mode and if internet is available it should take data from url only and display it in tableview..but for the second time it should make use of the saved json data to displ
-
11.2.0.3 RAC ASM Pri with Normal FileSys Active Standby Post Failover
The architecture consist of two node rac asm primary and one normal filesystem active standby all on Oracle 11gR2 11.2.0.3. With basic Broker Configuration. Performed a managed broker switchover and not the Normal Filesystem has the primary role and
-
Setting up iPad accounts for school teachers
I am working on rolling out iPads for 30 teachers at my school. Note that while I am my elementary school's instructional tech, I am not in any way a tech guru. Just the guy that was put in the position In a nutshell; we acquired 30 iPad 2 devices f