Query Capitalization date

Dear Sir,
We implemented SAP in May 2009.
We have capitalized assets thruout the year (2009-10) - some with date Mar 2010.
We have not run the depreciation at all.
Is it that, if i now have to create an asset with capitalization date - Feb 2010 - system won't allow?
Do i need to captitalize it in chronological order? if so why?
Thanks
Sanjay

Dear,
Sanjay.
March 2010 date range falls within fiscal year 2009. So you can capitalize assets in same year. Following best practices user has to take up the values as on date, delay may create the chaotic situation at end of fiscal year.
Running the depreciation is one of the period closing activity. If you run the depreciation and then capitalize any assets run it again. System will not post again the depreciation to all assets it will consider only planned depreciation values in the run for that particular period.
But folllowing such ways is not at all recommended it will nothing but shuffle the account books.
I hope you understand. If you have any doubts please share.
Regards,
Pankaj A Bhalerao.

Similar Messages

How to compare result from sql query with data writen in html input tag?

how to compare result
from sql query with data
writen in html input tag?
I need to compare
user and password in html form
with all user and password in database
how to do this?
or put the resulr from sql query
in array
please help me?

Hi dejani
first get the user name and password enter by the user
using
String sUsername=request.getParameter("name of the textfield");
String sPassword=request.getParameter("name of the textfield");
after executeQuery() statement
int exist=0;
while(rs.next())
String sUserId= rs.getString("username");
String sPass_wd= rs.getString("password");
if(sUserId.equals(sUsername) && sPass_wd.equals(sPassword))
exist=1;
if(exist==1)
out.println("user exist");
else
out.println("not exist");

How can I do for a row of a query be data provider for a variable?

Hi friends, I have a problem !
How can I do for a row of a query be data provider for a variable?
I need that a value of variable be stored when the user select a row in a query. At the BPS we can do this configuring the variable selector in WIB, and in a WAB how I can do this ?
Best regards,
Gustavo Liberado

In this case when I press the key to call other forms I need to wait for the response in the secondary form and then process the result.That is exactly what a "modal JDialog" (or JOptionPane) are used for.
Try it. Create a short demo program. All you need is a JFrame with a single button to show the modal dialog. All you modal dialog needs is a single button to close the dialog. After you show the modal dialog add a System.out.println(...) statement in your code and you will see that it is not executed until the dialog is closed.
Then once you understand the basics you add the code to your real program.
If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html], that demonstrates the incorrect behaviour.
Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.

An error occurred querying a data source - with REST services

Hi,
I have a SharePoint 2013 form library library with an info-path form. I need to get the logged in user's 'Display Name' on my form load automatically.
I used REST service to fetch the current user details. In the preview mode of the form, its showing the right name. But when I publish this form to library I am getting the following error.
REST Service --> http://site url/_api/SP.UserProfiles.PeopleManager/GetMyProperties
Please help me to resolve this issue.
Thanks in advance for your time and reply :)

Hi,
According to your post, my understanding is that an error occurred querying a data source with REST services.
It is defiantly permission issue with GetUserProfileByName service
and could be many reasons of this problem. You first try with UDCX file and make sure that UPS is running.
Here are some similar threads for your reference:
http://social.technet.microsoft.com/Forums/en-US/b8c668ea-7511-4657-a1a8-08fb4a6bd53d/info-path-an-error-occurred-querying-a-data-source?forum=sharepointcustomizationprevious
http://social.technet.microsoft.com/Forums/en-US/46866ac2-da09-4340-a86a-af72cbb2c8d7/info-path-an-error-occurred-querying-a-data-source-?forum=sharepointcustomization
http://blogs.msdn.com/b/russmax/archive/2012/08/17/want-to-call-sharepoint-2010-web-services-within-browser-based-infopath-2010-forms.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Error occurred querying a data source in office 365.

I have created a simple infopath form and in one of my dropdown box i am receiving the REST services.
when i run the infopath form 2013 in preview it was running good but when i upload it on to office 365 cloud it's showing me error. i had converted the services into UDL and save it on Data connection Library and it's approved.
Warning
Click OK to resume filling out the form. You may want to check your form data for errors.
The entry has been added to the Windows event log of the server.
log ID:5566
Correlation ID:feb08a9c-9d47-30f5-5d89-60340242d6d1.

Hi,
According to your post, my understanding is that you got error when querying a data source in office 365.
Per my knowleadge, we cannot connect to SharePoint Web Services from InfoPath Forms within SharePoint Online.
Loopback protection is enabled on the SharePoint Online environment and will block calls to SOAP and REST from InfoPath Form Services.
For more information, you can refer to:
Error message when you connect an InfoPath form to a SharePoint Online web service: "An error occurred while connecting to a Web Service"
As a workaround, to look up data for some dropdowns from several external REST Web Services, we need to have a Data Connection library in your Site Collection in which to store the UDCX files.
The steps seem to be:
Create a Data Connection Library in your Site Collection
In the InfoPath ribbon, go to Data, then Data Connections. Your existing data connections should be listed.
Choose the data connection which is hosted on a different domain.
Clink the
Convert to Connection File… button
In the location selector, specify the path to the Data Connection Library you created above.
Leave the
Relative to site collection (recommended) radio button selected.
Click OK
Here is a great blog for your reference:
InfoPath 2013 Forms on Office365 with External REST DataSources
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Query xml data from a CLOB datatye

All,
I read in an oracle white paper that is is possible to query XML data from CLOB datatype using oracle text index using operators HASPATH() and INPATH(). I am not able to find any example on how to do this. Can someone please post a simple example here.
Thank You very much!

SCOTT@10gXE> CREATE TABLE your_table (id NUMBER, xml_data CLOB)
2 /
Table created.
SCOTT@10gXE> INSERT INTO your_table (id, xml_data)
2 SELECT t.deptno,
3          DBMS_XMLGEN.GETXML
4            ('SELECT d.dname,
5                  CURSOR (SELECT e.ename, e.job
6                       FROM   emp e
7                       WHERE e.deptno = d.deptno) emp_data
8           FROM   dept d
9           WHERE d.deptno = ' || t.deptno)
10 FROM   dept t
11 /
5 rows created.
SCOTT@10gXE> COMMIT
2 /
Commit complete.
SCOTT@10gXE> begin
2    ctx_ddl.create_section_group('xmlpathgroup', 'PATH_SECTION_GROUP');
3 end;
4 /
PL/SQL procedure successfully completed.
SCOTT@10gXE> CREATE INDEX myindex
2 ON your_table(xml_data)
3 INDEXTYPE IS ctxsys.context
4 PARAMETERS ('datastore ctxsys.default_datastore
5             filter ctxsys.null_filter
6             section group xmlpathgroup'
7           )
8 /
Index created.
SCOTT@10gXE> SELECT * FROM your_table
2 WHERE CONTAINS (xml_data, 'PERSONNEL INPATH (//DNAME)') > 0
3 /
        ID XML_DATA
        50 <?xml version="1.0"?>
           <ROWSET>
            <ROW>
             <DNAME>PERSONNEL</DNAME>
             <EMP_DATA>
             </EMP_DATA>
            </ROW>
           </ROWSET>
SCOTT@10gXE> SELECT * FROM your_table
2 WHERE CONTAINS (xml_data, 'HASPATH (//DNAME="PERSONNEL")') > 0
3 /
        ID XML_DATA
        50 <?xml version="1.0"?>
           <ROWSET>
            <ROW>
             <DNAME>PERSONNEL</DNAME>
             <EMP_DATA>
             </EMP_DATA>
            </ROW>
           </ROWSET>
SCOTT@10gXE> SELECT * FROM your_table
2 WHERE CONTAINS (xml_data, 'CLARK INPATH (//ENAME)') > 0
3 /
        ID XML_DATA
        10 <?xml version="1.0"?>
           <ROWSET>
            <ROW>
             <DNAME>ACCOUNTING</DNAME>
             <EMP_DATA>
              <EMP_DATA_ROW>
               <ENAME>CLARK</ENAME>
               <JOB>MANAGER</JOB>
              </EMP_DATA_ROW>
              <EMP_DATA_ROW>
               <ENAME>KING</ENAME>
               <JOB>PRESIDENT</JOB>
              </EMP_DATA_ROW>
              <EMP_DATA_ROW>
               <ENAME>MILLER</ENAME>
               <JOB>CLERK</JOB>
              </EMP_DATA_ROW>
             </EMP_DATA>
            </ROW>
           </ROWSET>
SCOTT@10gXE> SELECT * FROM your_table
2 WHERE CONTAINS (xml_data, 'HASPATH (//ENAME="CLARK")') > 0
3 /
        ID XML_DATA
        10 <?xml version="1.0"?>
           <ROWSET>
            <ROW>
             <DNAME>ACCOUNTING</DNAME>
             <EMP_DATA>
              <EMP_DATA_ROW>
               <ENAME>CLARK</ENAME>
               <JOB>MANAGER</JOB>
              </EMP_DATA_ROW>
              <EMP_DATA_ROW>
               <ENAME>KING</ENAME>
               <JOB>PRESIDENT</JOB>
              </EMP_DATA_ROW>
              <EMP_DATA_ROW>
               <ENAME>MILLER</ENAME>
               <JOB>CLERK</JOB>
              </EMP_DATA_ROW>
             </EMP_DATA>
            </ROW>
           </ROWSET>
SCOTT@10gXE>

5200: Error executing query: The data form grid is invalid.

Hi,
I am getting this error " 5200: Error executing query: The data form grid is invalid. Verify that all members selected are in Essbase. Check log for details.
com.hyperion.planning.HspException;hasPovDims=1;povXML=<?xml version="1.0"?><datasources><datasource name="Profit " dsid="228af2c3_129ca3dd85c_-77b1" allowEdit="1"><dim name="Period" dimIndex="1" dsName="Profit " keyDimName="Period" memberName="Apr" displayName="Period: Apr"/><dim name="Year" dimIndex="2" dsName="Profit " keyDimName="Year" memberName="FY10" displayName="Year: FY10"/><dim name="Entity" dimIndex="5" dsName="Profit " keyDimName="Entity" memberName="9999" displayName="Entity: 9999"/></datasource></datasources>"
I have checked that both the systems essbase and planning are same. nothing's different. still i cannot find the exact reason why the report is not working.
can any please help me.
btw, i am using Hyperion Planning 9.3.1
Thanks,
BIMS

Hi
You probably deleted some members from outline that are used by report
I would recommend you to open you report/grid via rep.client and try to find which elements are abcent
Regards
Alexander
Edited by: Softperson on 19/8/2010 17:38

Error when querying OLAP data with BI answers

Have been doing all the Lessons in "Using Oracle OLAP With Oracle BI Enterprise Edition 10g Release 3". Got till lesson 3 where I'm supposed to query the data with Answers but If I add any of the facts to the report, I get the following error:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17003] Oracle gateway error: Unsupported data type 101. (HY000)
SQL Issued: SELECT Customer."Ship To" saw_0, Measures.COST saw_1 FROM Global ORDER BY saw_0
So I was wondering if anyone knows what the catch could be.
Thanks in advance!

Yes. Me too. I have the same issue and I don't find any information about it. Could anyone help ?

I need to pass a query in form of string to DBMS_XMLQUERY.GETXML package...the parameters to the query are date and varchar ..please help me..

I need to pass a query in form of string to DBMS_XMLQUERY.GETXML package...the parameters to the query are date and varchar ..please help me build the string .Below is the query and the out put. ( the string is building fine except the parameters are with out quotes)
here is the procedure
create or replace
procedure temp(
    P_MTR_ID VARCHAR2,
    P_FROM_DATE    IN DATE ,
    P_THROUGH_DATE IN DATE ) AS
    L_XML CLOB;
    l_query VARCHAR2(2000);
BEGIN
l_query:= 'SELECT
    a.s_datetime DATETIME,
    a.downdate Ending_date,
    a.downtime Ending_time,
    TO_CHAR(ROUND(a.downusage,3),''9999999.000'') kWh_Usage,
    TO_CHAR(ROUND(a.downcost,2),''$9,999,999.00'') kWh_cost,
    TO_CHAR(ROUND(B.DOWNUSAGE,3),''9999999.000'') KVARH
FROM
    (SELECT s_datetime + .000011574 s_datetime,
      TO_CHAR(S_DATETIME ,''mm/dd/yyyy'') DOWNDATE,
      DECODE(TO_CHAR(s_datetime+.000011574 ,''hh24:'
      ||'mi''), ''00:'
      ||'00'',''24:'
      ||'00'', TO_CHAR(s_datetime+.000011574,''hh24:'
      ||'mi'')) downtime,
      s_usage downusage,
      s_cost downcost
    FROM summary_qtrhour
    WHERE s_mtrid = '
    ||P_MTR_ID||
   ' AND s_mtrch   = ''1''
    AND s_datetime BETWEEN TO_DATE('
    ||P_FROM_DATE||
    ',''DD-MON-YY'') AND (TO_DATE('
    ||P_THROUGH_DATE||
    ',''DD-MON-YY'') + 1)
    ) a,
    (SELECT s_datetime + .000011574 s_datetime,
      s_usage downusage
    FROM summary_qtrhour
    WHERE s_mtrid = '
    ||P_MTR_ID||
    ' AND s_mtrch   = ''2''
    AND s_datetime BETWEEN TO_DATE('
    ||P_FROM_DATE||
    ',''DD-MON-YY'') AND (TO_DATE('
    ||P_THROUGH_DATE||
    ','' DD-MON-YY'') + 1)
    ) B
where a.S_DATETIME = B.S_DATETIME(+)';
SELECT DBMS_XMLQUERY.GETXML('L_QUERY') INTO L_XML   FROM DUAL;
INSERT INTO NK VALUES (L_XML);
DBMS_OUTPUT.PUT_LINE('L_QUERY IS :'||L_QUERY);
END;
OUTPUT parameters are in bold (the issue is they are coming without single quotes otherwise th equery is fine
L_QUERY IS :SELECT
    a.s_datetime DATETIME,
    a.downdate Ending_date,
    a.downtime Ending_time,
    TO_CHAR(ROUND(a.downusage,3),'9999999.000') kWh_Usage,
    TO_CHAR(ROUND(a.downcost,2),'$9,999,999.00') kWh_cost,
    TO_CHAR(ROUND(B.DOWNUSAGE,3),'9999999.000') KVARH
FROM
    (SELECT s_datetime + .000011574 s_datetime,
      TO_CHAR(S_DATETIME ,'mm/dd/yyyy') DOWNDATE,
      DECODE(TO_CHAR(s_datetime+.000011574 ,'hh24:mi'), '00:00','24:00', TO_CHAR(s_datetime+.000011574,'hh24:mi')) downtime,
      s_usage downusage,
      s_cost downcost
    FROM summary_qtrhour
    WHERE s_mtrid = N3165 AND s_mtrch   = '1'
    AND s_datetime BETWEEN TO_DATE(01-JAN-13,'DD-MON-YY') AND (TO_DATE(31-JAN-13,'DD-MON-YY') + 1)
    ) a,
    (SELECT s_datetime + .000011574 s_datetime,
      s_usage downusage
    FROM summary_qtrhour
    WHERE s_mtrid = N3165 AND s_mtrch   = '2'
    AND s_datetime BETWEEN TO_DATE(01-JAN-13,'DD-MON-YY') AND (TO_DATE(31-JAN-13,' DD-MON-YY') + 1)
    ) B
where a.S_DATETIME = B.S_DATETIME(+)

The correct way to handle this is to use bind variables.
And use DBMS_XMLGEN instead of DBMS_XMLQUERY :
create or replace procedure temp (
p_mtr_id       in varchar2
, p_from_date    in date
, p_through_date in date
is
l_xml   CLOB;
l_query VARCHAR2(2000);
l_ctx   dbms_xmlgen.ctxHandle;
begin
l_query:= 'SELECT
    a.s_datetime DATETIME,
    a.downdate Ending_date,
    a.downtime Ending_time,
    TO_CHAR(ROUND(a.downusage,3),''9999999.000'') kWh_Usage,
    TO_CHAR(ROUND(a.downcost,2),''$9,999,999.00'') kWh_cost,
    TO_CHAR(ROUND(B.DOWNUSAGE,3),''9999999.000'') KVARH
FROM
    (SELECT s_datetime + .000011574 s_datetime,
      TO_CHAR(S_DATETIME ,''mm/dd/yyyy'') DOWNDATE,
      DECODE(TO_CHAR(s_datetime+.000011574 ,''hh24:'
      ||'mi''), ''00:'
      ||'00'',''24:'
      ||'00'', TO_CHAR(s_datetime+.000011574,''hh24:'
      ||'mi'')) downtime,
      s_usage downusage,
      s_cost downcost
    FROM summary_qtrhour
    WHERE s_mtrid = :P_MTR_ID
    AND s_mtrch   = ''1''
    AND s_datetime BETWEEN TO_DATE(:P_FROM_DATE,''DD-MON-YY'')
                       AND (TO_DATE(:P_THROUGH_DATE,''DD-MON-YY'') + 1)
    ) a,
    (SELECT s_datetime + .000011574 s_datetime,
      s_usage downusage
    FROM summary_qtrhour
    WHERE s_mtrid = :P_MTR_ID
    AND s_mtrch   = ''2''
    AND s_datetime BETWEEN TO_DATE(:P_FROM_DATE,''DD-MON-YY'')
                       AND (TO_DATE(:P_THROUGH_DATE,'' DD-MON-YY'') + 1)
    ) B
where a.S_DATETIME = B.S_DATETIME(+)';
l_ctx := dbms_xmlgen.newContext(l_query);
dbms_xmlgen.setBindValue(l_ctx, 'P_MTR_ID', p_mtr_id);
dbms_xmlgen.setBindValue(l_ctx, 'P_FROM_DATE', to_char(p_from_date, 'DD-MON-YY'));
dbms_xmlgen.setBindValue(l_ctx, 'P_THROUGH_DATE', to_char(p_through_date, 'DD-MON-YY'));
l_xml := dbms_xmlgen.getXML(l_ctx);
dbms_xmlgen.closeContext(l_ctx);
insert into nk values (l_xml);
end;

"An error occured querying a data source" - Web Service connecting to GetUserCollectionFromGroupSupport

I have an infopath form that is getting the error when opening an existing form or creating a new form:-
Warning
An error occurred querying a data source.
Click OK to resume filling out the form. You may want to check your form data for errors.
Hide error details
An error occurred while trying to connect to a Web service.
Correlation ID:7ab6be2c-60e1-4025-be1e-1a2fbe00acd3
So I know its a permission issue because full control users have no problem. I have found a suggestion here suggesting making sure the group has "Who can View Membership to the Group" but that didn't work for me - and
my test user is only a member of one group -
http://sharepoint.stackexchange.com/questions/109488/usergroup-asmx-returns-unauthorized-for-some-groups
How can I get around this without provding users Full Control?

So I fixed this with exactly what I mentioned above by adding "everyone" "Who can View Membership to the Group" permission. My error initially was that I was looking at the incorrect security group.

Asset capitalization date

Dear Experts,
I am buying asset by PO. As far as I know, when we check goods receipt field in PO, system must use MIGO ( goods receipt ) date as capitalization date of asset. but when I try to do MIGO for such an asset, system shows me following error:
- Asset 1111 111000010-0 is incomplete, check the asset Message no. AAPO184
Diagnosis
The 'incomplete' indicator was set for asset 1001 111000010-0 because required entries were not made.
After investigating I see in asset master data, that asset does not have capitalization date and system consider that asset incomplete. ( I created asset at the time of creating PO ). please tell me why this happens and system needs capitalization date while capitalization date for that asset must be MIGO date. and system must not stop me and show error.
Regards,

Hi rakesh
Capitalization date were system will calculate the actual depreciation and how it can be GRN date ??
When you create assets in master data system you have to give capitalization date not as GRN date

Asset Capitalization Date change

Dear SAP Gurus,
We uploaded the opening assets in 2006 and the cpitalization date updated as 31.03.2006. Now our asset accounts team
wants to update the actual capitalization date .
Shall we change the capitalization date now? what is the impat ?
Is there any SAP notes available is this regard?
urg please...
Tamilselvan

Hi Tamilselvan,
it can have impact on the derpeciation calculation.
Perhaps it have impact on reporting (for example RAGITT_ALV01 if some transactions are posted bevore the capitalization date.
perhaps the following notes will help you.
50970   When and with which date is an asset capitalized?
548899 FAQ depreciation asset accounting
Generally this should not be really critically.
Regards Bernhard
Edited by: Bernhard Kirchner on Apr 21, 2010 2:31 PM

Asset capitalization date not appropriate

Hi,,
Please tell me while I run Asset settlement through KO88 in period 7 ie, 22October 2010 asset capitalization and first acquisition date become 31.10.2010 instead of 22.10.2010. Because I executed asset settlement through KO88 on 22.10.2010 which is appearing 31.10.2010. What is the actual logic of taking advance value date instead of taking current date? Is it taking entire month and value is stamped on asset master as last day of month.....
Regards,
Samrat

Dear Samrat,
when you enter the capitalization date manually the system uses this date as the default asset value
date when you post the first acquisition to the asset. If you do not enter a capitalization date in the asset master record, the system   automatically adopts the asset value date of the first acquisition   posting as the capitalization date. The system inserts the asset value    date of the first acquisition posting in the capitalization date field   (Capitalized on...) in the asset master record, when a capitalizing   transaction type is used.
Please check your customizing in IMG: Asset Accounting > Transactions > Specify How Default Asset Value Date is Determined
The System logic with Asset capitilisation date is as follows:
When no capitalization date is entered in the asset master record the posting date of the first posting will be taken as the      capitalization date not the asset value date.
Documentation:
R/3 Library:
Asser Accounting > Basic functions for transactions > Dates in Asset accounting
Default Values for Asset Value Date:
- Initial acquisition > Capitalization date from master record (if in
   same FY, otherwise posting date)
- Settlement of AuC > Posting date
Set 'Prime Rule' and 'Alt.Rule' for each transaction (in your case it is
for transaction 'Settlement of AuC')
Regards Bernhard

Problem inserting and querying XML data with a recursive XML schema

Hello,
I'm facing a problem with querying XML data that is valid against a recursive XML Schema. I have got a table category that stores data as binary XML using Oracle 11g Rel 2 on Windows XP. The XML Schema is the following:
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:complexType name="bold_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="keyword_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
               <xs:element name="plain_text" type="xs:string"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="emph_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="text_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="parlist_type">
          <xs:sequence>
               <xs:element name="listitem" minOccurs="0" maxOccurs="unbounded" type="listitem_type"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="listitem_type">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="parlist" type="parlist_type"/>
               <xs:element name="text" type="text_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:element name="category">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="name"/>
                    <xs:element name="description">
                              <xs:complexType>
                                        <xs:choice>
                                                       <xs:element name="text" type="text_type"/>
                                                       <xs:element name="parlist" type="parlist_type"/>
                                        </xs:choice>
                              </xs:complexType>
                    </xs:element>
                                                            </xs:sequence>
                                                            <xs:attribute name="id"/>
                                        </xs:complexType>
                    </xs:element>
</xs:schema>I registered this schema and created the category table. Then I inserted a new row using the code below:
insert into category_a values
(XMlElement("category",
      xmlattributes('categoryAAA' as "id"),
      xmlforest ('ma categ' as "name"),
      (xmlelement("description", (xmlelement("text", 'find doors blest now whiles favours carriage tailor spacious senses defect threat ope willow please exeunt truest assembly <keyword> staring travels <bold> balthasar parts attach </bold> enshelter two <emph> inconsiderate ways preventions </emph> preventions clasps better affections comes perish </keyword> lucretia permit street full meddle yond general nature whipp <emph> lowness </emph> grievous pedro')))
The row is successfully inserted as witnessed by the results of row counting. However, I cannot extract data from the table. First, I tried using SqlPlus* which hangs up and quits after a while. I then tried to use SQL Developer, but haven't got any result. Here follow some examples of queries and their results in SQL Developer:
Query 1
select * from category
Result : the whole row is returned
Query 2
select xmlquery('$p/category/description' passing object_value as "p" returning content) from category
Result: "SYS.XMLTYPE"
now I tried to fully respect the nested structure of description element in order to extract the text portion of <bold> using this query
Query 3
select xmlquery('$p/category/description/text/keyword/bold/text()' passing object_value as "p" returning content) from category_a
Result: null
and also tried to extract the text portion of element <text> using this query
Query 4
select xmlquery('$p/category/description/text/text()' passing object_value as "p" returning content) from category_a
Result: "SYS.XMLTYPE".
On the other hand, I noticed, from the result of query 1, that the opening tags of elements keyword and bold are encoded as the less than operator "<". This explains why query 3 returns NULL. However, query 4 should display the text content of <text>, which is not the case.
My questions are about
1. How to properly insert the XML data while preserving the tags (especially the opening tag).
2. How to display the data (the text portion of the main Element or of the nested elements).
The problem about question 1 is that it is quite unfeasible to write a unique insert statement because the structure of <description> is recursive. In other words, if the structure of <description> was not recursive, it would be possible to embed the elements using the xmlelement function during the insertion.
In fact, I need to insert the content of <description> from a source table (called category_a) into a target table (+category_b+) automatically .
I filled category_a using the Saxloader utility from an flat XML file that I have generated from a benchmark. The content of <description> is different from one row to another but it is always valid with regards to the XML Schema. The data is properly inserted as witnessed by the "select * from category_a" instruction (500 row inserted). Besides, the opening tags of the nested elements under <description> are preserved (no "<"). Then I wrote a PL/SQL procedure in which a cursor extracts the category id and category name into varchar2 variables and description into an XMLtype variable from category_a. When I try to insert the values into a category_b, I get the follwing error:
LSX-00213: only 0 occurrences of particle "text", minimum is 1which tells that the <text> element is absent (actually it is present in the source table).
So, my third question is why are not the tags recognized during the insertion?
Can anyone help please?

Hello,
indded, I was using an old version of Sqlplus* (8.0.60.0.0) because I had a previous installation (oracle 10g XE). Instead, I used the Sqlplus* shipped with the 11g2database (version 11.2.0.1.0). All the queries that I wrote work fine and display the data correctly.
I also used the XMLSERIALIZE function and can now display the description content in SQL Developer.
Thank you very much.
To answer your question Marco, I registered the XML Schema using the following code
declare
doc varchar2(4000) := '<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:complexType name="bold_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="keyword_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
               <xs:element name="plain_text" type="xs:string"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="emph_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="text_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="parlist_type">
          <xs:sequence>
               <xs:element name="listitem" minOccurs="0" maxOccurs="unbounded" type="listitem_type"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="listitem_type">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="parlist" type="parlist_type"/>
               <xs:element name="text" type="text_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:element name="category">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="name"/>
                    <xs:element name="description">
                              <xs:complexType>
                                        <xs:choice>
                                                       <xs:element name="text" type="text_type"/>
                                                       <xs:element name="parlist" type="parlist_type"/>
                                        </xs:choice>
                              </xs:complexType>
                    </xs:element>
                                                            </xs:sequence>
                                                            <xs:attribute name="id"/>
                                        </xs:complexType>
                    </xs:element>
</xs:schema>';
begin
dbms_xmlschema.registerSchema('/xmldb/category_auction.xsd', doc,     LOCAL      => FALSE,
        GENTYPES   => FALSE, GENBEAN    => FALSE,   GENTABLES => FALSE,
         FORCE      => FALSE,
         OPTIONS    => DBMS_XMLSCHEMA.REGISTER_BINARYXML,
         OWNER      => USER);
end;then, I created the Category table as follows:
CREATE TABLE category_a of XMLType XMLTYPE store AS BINARY XML
    XMLSCHEMA "xmldb/category_auction.xsd" ELEMENT "category";Now, there still remains a problem of how to insert the "description" content which I serialized as a CLOB data into another table as XML. To this purpose, I wrote a view over the Category_a table as follows:
CREATE OR REPLACE FORCE VIEW "AUCTION_XWH"."CATEGORY_V" ("CATEGORY_ID", "CNAME", "DESCRIPTION") AS
select category_v."CATEGORY_ID",category_v."CNAME",
XMLSerialize(content ( xmlquery('$p/category/description/*' passing object_value as "p" returning content)) as clob) as "DESCRIPTION"
from auction.category_a p,
xmltable ('$a/category' passing p.Object_Value as "a"
columns category_id varchar2(15) path '@id',
          cname varchar2(20) path 'name') category_v;Then, I wrote a procedure to insert data into the Category_xwh table (the source and target tables are slightly different: the common elements are just copied wereas new elements are created in the target table). The code of the procedure is the following:
create or replace PROCEDURE I_CATEGORY AS
v_cname VARCHAR2(30);
v_description clob ;
v_category_id VARCHAR2(15);
cursor mycursor is select category_id, cname, description from category_v;
BEGIN
open mycursor;
loop
/*retrieving the columns*/
fetch mycursor into v_category_id, v_cname, v_description ;
exit when mycursor%notfound;
insert into category_xwh values
(XMlElement("category",
      xmlattributes(v_category_id as "category_id"),
      xmlelement("Hierarchies", xmlelement("ObjHierarchy", xmlelement ("H_Cat"),
                                                           xmlelement ("Rollsup",
                                                                              (xmlelement("all_categories",
                                                                               xmlattributes('allcategories' as "all_category_id")))
    xmlforest (
              v_cname as "cat_name",
              v_description as "description")
end loop;
commit;
close mycursor;
END I_CATEGORY;When I execute the procedure, I get the following error:
LSX-00201: contents of "description" should be elements onlyso, I just wonder if this is because v_description is considered as plain text and not as XML text, even if its content is XML. Do I need to use a special function to cast the CLOB as XML?
Thanks for your help.
Doulkifli

How can I make a query by date with several TDMS files?

Hi,
I have a project that can write and read TDMS files everyday (a file for each day with date and time). There, I can import those files to excel (I choose a file and load it). But, I have a question: How can I make a query by date with those TDMS files? I'd like make a time stamp for start date and stop date, where I could compare the TDMS file dates and sum the values that are in the channels where these files are similar. For example, I save a file with "02/01/2013" name, in other day "03/01/2013", in other day "04/01/2013"... so, i'd like put in time stamp for start date "02/01/2013" file and to stop date "04/01/2013" file, than, sum all values that range with my TDMS files existing. How can I make that?
Thanks all,
Val

Hello Val_Auto.
You're Brazilian, no? Me too. = ^ - ^ =
I converted VI to version of your LabVIEW (8.5). Is attached in this reply.
This VI search all your TDMS in a range of dates and join them in a single TDMS. I hope this is what you wanted.
Query TDMS is the main VI. The TDMS VI Search changes the date format that out from calendar control (which is DD / MM / YYYY) to DD-MM-YYYY. This is because you can't name files using "/". I chose "-" but, if necessary, you should change to keep the same format of your TDMS files.
If you have any doubt as to its operation or how to make changes to adapt VI for your application, keep at your disposal.
Thank you for your contact; I hope have helped you and succeed in your application.
Wesley Rocha
Application Engineer
National Instruments Brazil
Visite a nossa comunidade em PORTUGUÊS!!!
Attachments:
Query TDMS.vi ‏62 KB
tdms search.vi ‏24 KB

Query Capitalization date

Similar Messages

Maybe you are looking for