Query Creation directly in Production

RSA1-->Transport Connection
Choose the 'Bex Changeability' icon at the top right screen; in the popup set 'Everything changeable' for query elements.

storage bins are master data and not customizing, hence they are created in production system directly.
if you create them in development system, then you do not get any transport request.
(but it is possible to create a transport request manually and add the LAGP table entries to it)
but usually bins do not have individual names, a warehouse has a certain structure, and bins get identified by coordinates.
you can customize a schema for the naming and generate the bins.
this schema can be transported.
And then you just execute LS05 to generate the bins

Similar Messages

BIN creation directly in Production Server

Dear all,
Can we create BIN directly in Production Server without creating in Golden Server.
I mean does it will work if we directly create in production server ?
Please suggest your view.
Regards,
Rocky

storage bins are master data and not customizing, hence they are created in production system directly.
if you create them in development system, then you do not get any transport request.
(but it is possible to create a transport request manually and add the LAGP table entries to it)
but usually bins do not have individual names, a warehouse has a certain structure, and bins get identified by coordinates.
you can customize a schema for the naming and generate the bins.
this schema can be transported.
And then you just execute LS05 to generate the bins

Is construction of webi directly in production a best practice?

with bex-query and universes well consolidated and tested by a IT group,
can be considered the construction of webis directly in production without going through test and quality a Business Objects best practice?
is possible allow end-users (non IT personal) construct this webis?
Is there a document of good practices that SAP made this recommendation?.
thanks in advance by the answer.
Ramón Mediero

If universe and all has been tested and signed-off; also end user are familiar with Webi report development and they want their ad-hoc reports instead of pre-developed report set; There will be no issue to allowing end user to develop the Webi reports in production. However there we have to take care of few points like
> need to check where report creation in production's public folder is feasible or not ? If yes how? is we need to create separate folders for individual user or what else ? and if No then what will be alternative like they can create in favorite folder?
> also we need to take control on number of report that users will create. however may be users will create so many reports with huge amount of data refreshes and etc and PROD will face performance issues etc etc...
like this there can be so many considerations needs to consider
Hope this will give u some idea...
Vills

Could anyone provide the complete manual of SAP Query Creation

Hi,
Now I am learning to create SAP Query.
I viewed many questions and answers about SAP Query.
Some mentioned this,and some did that...
Could anyone provide a complete manual of SAP Query Creation for developers.
I can create SAP Queries step by step with it.

http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
use either SQ02 ans SQ01
or SQVI tr code
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
useful
http://www.erpgenie.com/abap/code/abap47.htm
regards,
Prabhu
reward if it is helpful

Site Creation directly in PROD system

The standard way to create a new site in WB01 is in DEV and transport it through to PROD and move the customer via ALE.
Are there many customers out there who have experince in creation of the site in WB01 directly in Production environment. I know it's possible in WB01 but then the configuration for site is blocked. If all configuration data is proposed correctly from the site creation reference store it should be possible without opening the client for configuration.
Only problem is if ever any of the configuration changes for an existing site, we would have to open the productive system for configuration to do it.
Does anybody have experience creating stores directly in Production in WB01, is it a workable solution?

Dear Rudy,
Yes...you can provided you copied properly from reference Sites.
Site master is vital organization unit in Retail business operation. So, entire IMG settings are depends upon this Site master. If Site master data not copied properly from reference Sites, cascading effect are enormous.
Therefore, I strongly suggest and recommend you to create Site master using transaction code WB01in Golder Master and then you can move (through ALE) to Development / Quality client for necessary testing.
After integration testing, again you can move to Production Client through ALE.
Regards - Muralidhara

Strategy 82----How to stop creation of New Production Order

Hi All,
My client is facing problem with the material which having Strategy 82- Assembly to Order, As when they make a sales order , w,.r.t that a Production order is made automatically by system,. User complete the production process and deliver this material , now when ever the Sales user change "Credit Block: in that particular sales order again a New production order created to this sales order, How to control his creation of new Production order? As if new production Order create it brakes the link between Sales order and the previous Production order which is already in delivered status.
Your Prompt response will be appreciated.

HI ,
I am closing this thread , as I know how to got a control on trhis, As of behaviour, startegy 82 says every time u change in sales order it will create a new Production order during saving, if the previous order is not been in ONLY REL status. So the only option to control this is in S.O ,change the Item category to "CN" i.e NO MRP when if required there has been any modification to S .O. In std SAP system item catageory has to be congiured , in SPRO SALES we can do the necessary settings.

Perfomance Based on Infocube creation or Bex Query creation

Hi,
I just wanted to know is there any performance is affected whether Universe is created on top of Bex query or on top of Infocube.
Out of these which is the Best practice to follow.
Regards
Gaurav

This is the best practice to follow
build your universe on top of Query not direct infocube
this will keep the row level security applied.
the performance will depend on how you design your query and the amount of data to be retrieved from the infocube.
good luck

Mass creation of warehouse products

We are about to implement our first EWM storage warehouse.
In classical WM we used to prepare the material master data in an Excel sheet and used the RMDATIND via LSMW for creation of the warehouse specific data.
In EWM however, I found nothing similar for the creation of warehouse product data. Our release is 7.01. Did I miss something?
Any help is greatley appreciated.

Refer below link this will help you
https://websmp104.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_HIER_KEY=701100035871000439550&_OBJECT=011000358700001249652011E&

Duplicate Queries and Query Components in BI Production Box

Hi:
We have a situation where we have duplicate queries and query components in our Production BI box.
The problem was caused by transports. We have a development landscape and a support landscape where both are transporting separately up to the BI Production Box.
For example, query ABC was created in the development landscape and transported up to our production box.
The same query ABC was created in our support landscape and transported up to our production box.
Now in the production box we have 2 queries ABC with the same technical name and description but with different active ELTUIDs.
We have found the program ANALYZE_RSZ_TABLES and it does show us this problem in our production box with many queries and query components.
The question is how do we get rid of the duplicate ELTUIDs in our Production box and how do we stop this from happening during transport?
any suggestions would be helpful.

Hi JC,
I think you can use Tcode RSZDELETE to delete the duplicate UIDs of elements or any query objects.
Test it in dev box / sandbox before using it in prod.
Thanks

Query Creation

Dear All ,
This is regarding Query Creation.
I want to create Query by Joinging Two tables.
I have created User Group, Created Infoset,
Now am creating Query by SQ01.
Going Step by step correctly.
I have Tick mark on Field group and selected .
Then By next screen i have marked for option for Parameter.
Then Clicked on "BasicList" Button.
Now after clicking Basic list button i am not getting screen of Basic list Line Structure
i.e Scrren with detais like with heading of type Field , Line ,Sequence, Sort Total etc. i am not getting.
Instead, After Pressing BasicList button i am getting screen like Query ...... layout Design.
So where /How cani get Scrren of Basic List Line struecture.
In which menu / option i have to check.
For Information we have SAP ECC 6. 0 with Application support Package no. 14.
PL help me for my probelm
Regards
Swati

Hello,
I got solution of my probelm.
Removed Tick Marked from Menu option Settings --> Setting -
> Here removed tick mark from Graphical Query Painter.
Thanks to all.
Regards
Swati

Maintaining Table Entries directly in production

Hi All,
I have created a Z table. This table has been moved to production. Currently table entries are transported to production from development client. But this table regularly gets changed and so this needs to be maintained day to day basis. As per the policies transport request to production is moved only at specific times. Client in the production is not modifiable (Closed Client where no change authorization). To maintain the entries in the table every time client in the production should be opened.
Can you please let me know is there any way we can maintain the entries without opening the client for changes and without moving the entries with the transport request? Is there any other way to maintain the entries?
Thanks in Advance,
Shravan G.
Moderator message: please use more descriptive subject lines from now on, changed for you this time.
Edited by: Thomas Zloch on Nov 30, 2010 2:26 PM

Dear,
Create a maintainence view on that Z table. In that Maintainence table select Maint status->Delivery class-> select "Customizing" option. If any one creates new entry in Dev, system popsup for a TR. Those new entries will be saved in to TR. You can transport that TR across landscape.
The above one general practice for customization.
If you dont want that, create a table maintainence dialog on that z table and hence create a tcode with SM30 from SE93 transaction code.
Go to SE93-> select transaction with parameter
                      Enter transaction SM30
                      check Skip initial screen
                      In default values maintain below:
                  VIEWNAME     Z table name
                  UPDATE     x
Using that tcode you can maintain values directly in production
Thanks and Regards,
Edited by: chandra madapati on Nov 30, 2010 6:17 AM

Transfer SAP Query Output directly to SharePoint

Hi,
We are running the SAP Queries in the Background. I have a requirement to transfer the SAP Query output directly to SharePoint site. Could you please share your ideas on this?
Regards,
Siva.

I don't have an answer but have the same issue. Did you ever resolve?

Basic Query Creation

Hello,
Our company is about to go live with B1 and E commerce. We are very much looking forward to getting the ball rolling: the old MOM system and Sitelink shopping cart is causing issues!
Anyway, before i go too much further i would like to get hold of some basic Query creation documentation. So far i have been unable to find any.
If i have posted this in the wrong discussion group i apologies.
I look forward to hearing your comments and becoming a regular in this group,
Thanks,
Charlie

Hi Charlie,
Beside this forum, you may also search and post here:
SAP Add-Ons
Thanks,
Gordon

SE78 - uploading graphics directly in production

Hello,
Could some of you enlighten me as to why graphics upload function is a transportable activity? I would imagine that it would be fairly straight forward to upload a graphic for use within a standard text directly in production. Any downsides of following this approach?
Much appreciated,
Mantas

The requirement is to allow users to upload graphics to standard texts that will then be used in plant maintenance work orders (POs were just an example). There may be a large number of those graphics, hence I would not be able to go through the transport procedure every time a user wants to upload a graphic.
SE78 would be a possibility but only if this uploading process could be done directly in production, however this doesn't seem to be a good idea..
Does that make sense?
Mantas

Query reads directly from aggregates? / BW statistics

Hi,
Query reads directly from aggregates? / BW statistics
1.
How do you switch on BW statistics collection for a Cube?
And what is the signification on switching this statistics on?
2.
In selecting an infoprovider for query a to read against, do we select a cube and the cube automatically reads from the cubes aggregates or
can the query be defined to read directly from the aggregates?
If the answer is to run the report against a cube, then how do we direct the query to read from the aggregate of the cube instead of the cube?
Thanks

How do you switch on BW statistics collection for a Cube?
And what is the signification on switching this statistics on?
Go to RSA1 - info provider tree and on menu - tools - BW statistics for info provider. Click that and you will get a pop up of all providers and check the boxes "OLAP or WHM" The signifinfance of this, is when you collcect statistics, and run reports out of BW statistics cubes, you can monitor load and reporting performance and also navigational patterns of reports by users.
In selecting an infoprovider for query a to read against, do we select a cube and the cube automatically reads from the cubes aggregates or
can the query be defined to read directly from the aggregates?
NO. We dont set it.The OLAP will use aggregate if it finds anything suitable.
Ravi Thothadri

Query Creation directly in Production

Similar Messages

Maybe you are looking for