Query Customization Not Reflecting in POWL WD ABAP

Hello All,
We are customizing Powl in MSS for CATS and Leave Management. Changes done in POWL_QUERY are not reflecting in POWL Application.
In MSS we have done following customization in POWL:
We are using query MSS_POWL_CATS_APPROVAL_1 for CATS approval and we are enabling search criteria through query parameters by
ticking search checkbox. We have also cleared powl cache by running POWL_D01.
2. Changes done in Powl_Query transaction are not getting reflected in Powl Application.
We have changed the Admin layout in leave approval query MSS_POWL_LEA_APPROVAL using configuration mode ( sap-config-mode
= config ) in layout variant and assigned a new layout to leave approval and cleared cache (POWL_D01 report) but still changes are not reflected in POWL.
Looking forward for your support. Any help will be highly appreciated
Regards,
Nishant Gaur

Hi.
Please try.
SQ01
Input query ID.
menu-Query-More functions-Generate program

Similar Messages

Date Customer Exit in the query is not reflecting in the workbook

Hello.
We have a BI 7.0 Query where we have a restriction for req del date and billing date to show the month of current date - 2.
We have written 2 customer exit variables and we have restricted the same. The query is working well.
For Broadcasting, we have created a workbook for this query and saved it under a role.
The workbook is fine running for the current month., But if the month changes to the next, the workbook is not reflecting the same.
Still only Old dates are available in the workbook.
Please let me know if i am doing any mistake

Hi Karthik,
If the customer exit variable is of type i_step = 1, ie if it is a manual entry variable as well, then this will not get updated based on teh month of execution.
Kindly check the article below for info.
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/enterprise-data-warehousing/how%20to%20update%20variable%20values%20in%20broadcast%20settings%20dynamically.pdf
Regards.
Shafi.

Query condition not reflected in VC model

Hello,
I have a query that has a condition that allows the user to view the Top N of a key figure by entering the desired "N" amount. When I run the query on its own, it works as expected. If I enter 5, I see the top 5 results.
I have put this query into VC with an input form that allows the user to designated the desired number of results, but now the results do not reflect the condition and just show all the results for that key figure. Any suggestions?

Hi Ravi,
Can you please share how did you resolve this as we are facing same problem.
Really appriciate your help.
Regards,
Dipesh.

RPM Portal - not reflecting - change in WD Abap structure

Hello,
I am Abap developer and know very few things about portal.
Recently changed a struture(enlarged two fields from INT1 to INT2) in WD ABAP.
The problem is change is not reflected in RPM Portal.
My questions :
1.How to find from which struture the portal fetches the value ?
2.New error is displayed on an other field in the same structure which was modified.
Type conversion error, field ZZRPM_INV_MAK,complex type class
com.sap.xapps.cprxrpm.model__Rpm_Ts_Item_D_Api.
Solution is quite urgent.
Thank you

It was resolved after restart of Portal server.

Webdynpro iview Customization not reflecting to all users

Hi Forum,
In Webdynpro ivew, from Content Administration >> preview >> done some customization by CTRL+Right Click. But when we access that page assigned to a role, customization is reflecting to only that user but not for other users. But we want this customization to be reflected to all users who is accessing that role associated with that webdynpro ivew.
Please help us to resolve this issue
Regards
Sudhir

closing the thread

Heading style customizations not reflected in HTML Help file

I wanted to share a solution I found for a problem with heading styles. I am using RoboHelp 9 for Word with Office 2010 and generating an HTMLHelp .chm file. When I migrated from Office 2003 to 2010 and RoboHelp 8 to 9, I customized the RoboHelp.docm template file to change the heading styles to have an orange border line over the header. (I had made the customizations in RH 8 for Word, but couldn't transfer the customization to the new template, so I did it by hand). The border line came out black in the header file in most of my topics in the .chm help file. I found one Word doc had topics with the orange line displayed correctly in the help and discovered that that heading style had Style Type = Linked, so I went to each of my Word docs and changed my Heading 1 style to use that style type and it fixed it for all my heading styles.
In Word 2010, you can change this from the Home tab, Styles ribbon. Rt-click on the Heading 1 style and choose Modify. In the Modify Style dialog set Style type to Linked (paragraph and character).

Thanks for sharing!
Greet,
Willam

Customizations not reflected in 11.5.10

Hi All
We have upgrated our Oracle Apps from 11.5.5 to 11.5.10. but the customizations that are done in 11.5.5 are missing in 11.5.10.
Actully along with five tabs( Home,Orders,Shipments,Planning,Account,Product) , three more tabs are added. But when we migrated our Application from 11.5.5 to 11.5.10 , these all customizations are missing.
Can any one help me out what would be the reason for these.
Regards
Vikram

You can use the migrate script oracle.jrad.migration.Ak2Jrad and the following are the usage parameters.
java oracle.jrad.migration.Ak2Jrad
applicationId
top level regionName
username
password
dbconnection
outputdir
This will migrate the AK data in to JRAD xml files. You should remember to provide the specific regionName you want to migrate, otherwise it will migrate everything.
Once you are done with the migration it will generate some additional files like regionMap which you can ignore. The migrated files will be under outputdir/oracle/apps/<prod name>/<pages/regions> folder. You should then rearrange them in any package structure which makes sense to you but you need to keep the /oracle/apps/<prod name> intact. Once you have done that move them to the db using import script, change the function web html calls to point to OA.jsp?page=.... the new package structure of the pages, bounce and you are done.
Sounds easy isn't it, try and let me know the problems :).

Workbook is not reflecting changes

Hi Friends,
I have done some changes in existing structure at1 existing query and same structure are using in different query also, that also reflected and working fine, but these 2 queries are already added in 1 workbook as in 2 worksheets, the problem is, the changes which I did in query is not reflecting in workbook ( 2 worksheets in workbook ), how do get reflect those queries in workbook. Pls suggest. Thanks.
Regards,
CS.
Edited by: csr_03 on Jul 22, 2010 3:07 PM

Hi,
You have made changes to query but those changes do not refelct in workbook automatically.
Either you need to create new work book by using the modfied query or use the existing workbook and include the modified query again after removing the existing one.
Workbook is just an excel save file of any exitisng query so you need to save or creat that file again.
I hope it will help.
Thanks,
S

Entries are not reflecting to the database in ABAP Dictionary....

Hi Friends,
i had maintained Table Maintenance Generator for a Custom Table in the ABAP data dictionary.
Inserted an extra button in the screen of SM30 for the same. i had written the logic for the extra button also.
the desired functionality is achieved but after clicking the custom button on the application bar of the SM30 the values are reflected on the screen table but not reflected or saved those entries into the Data Dictionary.
what might be the problem in this scenario....?
can you pls suggest me your experiences which had you come across this type of requirements.......?

Hello venkat,
Please check this link, It might be helpful to you. I believe you have written the code for custom button in the events.
http://help-abap.blogspot.com/2008/09/add-custom-button-on-maintianence-view.html
try to use insert statement in the event for the custom button. Let me know the peice of code you have written for this custom button.
Thanks & Regards,
Nagaraj Kalbavi

Query changes are not reflecting

Hi All,
Scenario: We have changed in Query from Query Designer in BED system and moved to Quality system but the changes are not reflecting. After checking tables RSRREPDIR and RSZCOMPDIR, we found out the information as below:
Note: Production System - BEP
Quality - BEQ
Development - BED
We have 2 issues with Queries in different systems as below:
Issue 1: Query name: T01
Issue 2: Query name: T02
Issue1:
Table - RSRREPDIR
BEP -
COMPUID : 4U2P65LLZVYUZLGQFYPVZ1R2M   (also present in table - RSZCOMPDIR)
GENUNID : 4U2QC61SREY9HKJFVEHM894CU
BEQ -
COMPUID : 4T6BTKW1X3RYN7H2UO4WMLWLQ   (also present in table - RSZCOMPDIR)
GENUNID : 4T6BUM0LKCPAO5H71ZG983P72
COMPUID : 4U2P65LLZVYUZLGQFYPVZ1R2M   (also present in table - RSZCOMPDIR)
GENUNID : 4U2QC61SREY9HKJFVEHM894CU
BED -
COMPUID : 4T6BTKW1X3RYN7H2UO4WMLWLQ   (also present in table - RSZCOMPDIR)
GENUNID : 4T6BUM0LKCPAO5H71ZG983P72
COMPUID : 4U2P65LLZVYUZLGQFYPVZ1R2M   (not present in table - RSZCOMPDIR)
GENUNID : 4U2QC61SREY9HKJFVEHM894CU
Issue2:
Table - RSRREPDIR
BEP -
COMPUID : 4U18JA5FD2PB9ZB1RS0PWS5E6   (also present in table - RSZCOMPDIR)
GENUNID : 4U188U6N2623QPCTMC43MFOZY
BEQ -
COMPUID : 4T6MDKABLUBC46HOKZMC0K6KU   (also present in table - RSZCOMPDIR)
GENUNID : 4T6MEWPZ6178KB4LDKDREY34E
COMPUID : 4U18JA5FD2PB9ZB1RS0PWS5E6   (also present in table - RSZCOMPDIR)
GENUNID : 4U188U6N2623QPCTMC43MFOZY
BED -
COMPUID : 4U18JA5FD2PB9ZB1RS0PWS5E6   (not present in table - RSZCOMPDIR)
GENUNID : 4U188U6N2623QPCTMC43MFOZY
but in Table - RSZCOMPDIR
BED -
COMPUID : 4T6MDKABLUBC46HOKZMC0K6KU
GENUNID : 4T6MEWPZ6178KB4LDKDREY34E.
Please suggest which query element and from which table we should remove to have a sync with all systems.
Thanks in advance!!
Regards,
Niranjan Chechani

If possible can u Compare Bex queries in All 3 systems Using RSRTQ tcode, Either they are matching or not?
How to compare using RSRTQ u can Refer Below :
Compare Bex Queries in Different Client /System.
Regards,
Seshu.P

Changes to the infoobject are not reflecting in the query Desinger level.

Hi All,
We removed some Attributes to one characteristic and transported into QA.
The removed attributes are not getting in BEx query designer in Dev, But we are getting those removed attributes in the context menu of that particular Char in BEx Designer in QA.
We checked in the Characteristic level, those removed Attributes are not there in Info object level but still those Attributes are displaying in BEx designer level in QA.
And info object showing as gray color even though we activated the info object, We think this may be the cause to not reflect the changes to BEx Designer level.
Can any one suggest us to resolve the issue.
Thanks & Regards,
Raju. E

Hi Raju
Go to transation RSRT enter one of the reports and click to Generate Report. If this solves your problem then you can go to Environment\generate queries directly to regenerate the impacted queries.
Cheers
Tansu

Query changes are not reflecting in the Workbook.

Hi All,
I have modified the query by adding attributes. But the changes are not reflecting in the workbook.
Do i need to insert the query again in the workbook or is there any option that will reflect the changes in the workbook
Thanks in Advance,
Suneel.

Hello Suneel,
if you insert the query again, it will work, but it is not the best way to delegate the query changes to the workbook.
Just open your query from within your workbook (BEx menu 'change global definition') and use the green button at the top left in order to transfer the new query structure to the workbook. The query will be executed and you should see the changes.
Don't forget to save the workbook afterwards.
Regards,
Kirill

Query in MSS does not reflect selection on period

Hi group,
I have made a query in global area. In MSS I am calling the generated program from the query. This works fine. However, the selection on period in MSS does not reflect on the report. No matter what I choose, the report gives me the date period that I have set up in my variant in the background.
The selection screen for the report is the standard delivered with LDB PNPCE.
I have tried different date setup in my variant, but no matter what I do, I am not able to choose dynamically period from MSS.
Any help is appreciated
Kirsten

Solved this by saving the variant without passing values.

Changes to Query not reflected in views

We want to use various views off of a 'master' query to publish in our portal. I was working on the assumption that an advantage of the views was that if a change needed to be made it could be made in the query and then all the views off of that query would reflect the change. However I have discovered that some changes made in the query do not get reflected in the views. For example if I change the scaling on a key figure, this change does not get reflected in the views. In one case, as a test, I modified a formula in the query and also changed the scaling. The view reflected the modified calculation but did not reflect the new scale.
Does anyone know how to force these type of changes or is there documentation that at least list those changes made to the query that will not get reflected in the views?
Any help would be appreciated.
Stan Pickford

Hi Stan,
in general: Everything which belongs to the query view object won't be overwritten by query changes.
What belongs to the query view object? Basically everything you can change during execution of a query (Dynamic filters, Drill-Down-State, Properties of characteristics, structure elements (keyfigures) and Query-View).
What does not belong the query-view object: Definition of structure elements, Navigation space (characteristics available during runtime), Static filters.
Heike

Regarding Conditions not reflecting in Herarchy query

Hi Gurus,
I have a scenario where i have created query on a multiprovider. In the query designer i have selected infoobjects like region code, Director ... and in columns i have selected mileage, .....i have also selected in the Rows as Expand as Hierarchy.
The query is working fine. But the Conditions i have specified for mileage < 0 or anyother condition reflects only for region level. But it is not reflecting for Director level and subsequent lower level like manager..... In the condition i have selected for all characteristics.
Kindly guide me to reslove the issues.
Regards,
Mano

Mano,
Depending on the characteristics you have in your report you will need to change the Conditions to look at the mixture of individual characteristics rather than All characteristics in the drill down independently.
Open up the conditions dialogue box and make the relevant section in the "Evaluate the conditions displayed below for:"
Regards
Gill

Query Customization Not Reflecting in POWL WD ABAP

Similar Messages

Maybe you are looking for