Query definition could not be read BRAIN252

Hi All,
I have faced below issue in staging system after transport. The query is running fine on dev & quality. I can't even find the element in error in the RSZ* tables. Please share if any solution.
Note: I have collected and transport the query again, still I face the error.
During run in RSRT
During query generation in RSRT
Thanks,
Angavai Elangovan

I had quite a similar problem.
The reason was that the records in RSRREPDIR table were duplicated i.e. records for dev, quality and production were not identical.
The solution I found was:
1) SE38 run ANALYZE_RSZ_TABLES
•Select database table: RSRREPDIR
•Object Version: A
Then execute the report
2) On the check report find section Table RSRREPDIR
•View details of this section
•The detail list will contain the queries which are incorrect, and probably your query among them as well.
Then execute: Performing a rep air
You can find more information about ANALYZE_RSZ_TABLES in SAP Note 792779 - Report ANALYZE_RSZ_TABLES

Similar Messages

Error Msgs: iPhone cannot be synced..disk could not be read from or written

PLEASE PLEASE PLEASE - pass the word. If you have issues at all trying to sync your iPhone to your Mac please make sure you connect the cable directly to its USB port. DO NOT connect the sync cable to your keyboard. And in a huge revelation to myself - DO NOT connect your sync cable to a USB hub which in turn is connect to your Mac, even if the hub is powered by A/C. I thought for sure my two week old iPhone was defective by getting errors from iTunes saying "iPhone . . . cannot be synced. The disk could not be read or written to", "Attempting to copy to disk failed". The best one was when I thought I might need to restore my iPhone and getting "Could not be restored unknown error occured (OXE800006B). I would suggest to Mac to place a suggestion in the error messages to check if your cable is directly connected to your Mac. It might save some headaches. My phone works fine now!
Message was edited by: mtsellers

Good to hear of your success, and a good post. Using Mac keyboard usb ports and hubs is definitely not to be advised.
Phil

Service Desk: Pricing data for partner could not be read

Hi all,
I am trying to configure the Service Desk functionality for Service Providers (on EHP1).
I follow the SAP Documentation (SAP Solution Manager: Service Desk for Service Providers) and SLA's made easy in SAP Solution Manager. Also some discussion threads helped me with some steps (I applied e.g. the recommendation from Pricing data for partner 106 could not be read. , but it didn't help).
I am facing some errors related to the CRM part of the configuration.
When I create Service Desk Contract (SLFV) in CRMD_ORDER, the error appears Pricing data for partner xxx could not be read. I checked the setting of BP and I am not able to find the reason, for customer's (sold-to-party) BP the sold-to-party > Sales Area Data the Sales Organization/Distribution Channel/Division are maintained. Which information for pricing is needed and where can it be configured?
Another error - I am sure it is related to the first one - the service contract cannot be determined in the service message (in Item details view under product). The error messages are about sales area/organization, so I suppose there is something wrong with the link Service Contract -> Business Partner definition.
Could you please help me what can cause the error?
Thanks in advance,
Vaclav

Hi Balaji.S,
my problem was solved when I double checked the settings of org structure. That means there must be a consistent setting for sales organization / distribution channel / division in businness partner (tcode BP), organizational model (PPOMA_CRM), product workbench (COMMPR01). The setting must be same for both the sales department of the service provider and the customer's company (I am sorry I am not CRM, so I am following just this simple logic)
In the long text of the error (in CRMD_ORDER) I could see "expected" combination for sales organization / distribution channel / division (message e.g. The access was carried out with sales organization 'O 50000613', distribution channel '01' and division '') -> when the org model was set up everywhere in this way, the contract was automatically filled by the organization data and in the next step the contract could be determined in the service desk message.
Anyway it took some time to find out the correct combination. Deeper CRM knowledge would help me much.
Vaclav

ERROR - disk could not be read or written to

I have reinstall software, updated IPOD to 2006 software, restored Ipod shuffle and when I try and Autofill using my own list of songs I get this message: The Ipod cannot be updated. The disk could not be read from or written to.

I've gone right of iShuffles. Mine refused to play ball a couple of months ago so my wife kindly got me a new Video iPod - which I recommend) and my son's shuffle decided to shuffle off this mortal coild too. I used the online Apple service to get both replaced - really excelent service, replacements to my door and return service too. Full marks Apple.
My replacement Shuffle worked just fine. My son's - zero marks Apple. disk could not be read or written.
No kidding, I've been removing, re-installing, plugging, unplugging... for six hours straight now! I've definitely read all that Apple have to say, which isn't much.
I've definitely stripped out all iPod and iTunes mentions and gone from the original install CD to latest versions - same result. Then just straight to latest versions after removing everything, same result.
When I plug this same shuffle into my HP Laptop - it just works fine, no problem at all. This is what's kept me going all these hours - it MUST be a software issue on our shared home computer. I virus and shareware checked and cleaned, but no issues there. Some mentions on other forums showed users who's startup drive letter was not C: cured the problem by changing to C: but mine already is.
So I'm completely at a loss now. What I am curious about is that the posts on this subject are all in the past few days - could it be an issue with the latest iTunes or Shuffle updater? My laptop on which it runs is has iTunes 6.0.2.23, but that was on the problem machine before I updated in the first attempt to cure the problem. So it isn't the iTunes version. And my HP has the latest iPod updater on it too, so can't be that simple either. And the Shuffle fails on one machine while working on the other with the same firmware in the Shuffle, so it can't be just that either.
There's a story about Thomas Edison being positive in his search inventing a working lightbulb - along the lines that it took him 10,000 failures before he found a solution. At each point he celebrated having identified another way that did NOT work, bringing him one step closer to the answer. So in that vein... I can celebrate about 20 ways I have identified to NOT solve this problem. If it were left to me, we wouldn't have electric light - I'd have given up;-)
Rob.

Could not be saved because the source file could not be read.

I tried to download and after a while, this error message: ''[filename] could not be saved because the source file could not be read.'' I've been on google searching but I could not find the answer can someone PLEASE help me. it happened when downloading a game and I've already seen a few times before but it was less important.
sorry for the bad english I used a translator.

This problem isn't only happening with Firefox 4, for windows, as the System Details, and Tags indicate.
I'm using a Mac laptop (OS X 10.5.8 -- Leopard), using Firefox 6, and have been having this problem with large files for quite a while ... possibly since FF 4, but definitely with FF 5. The large files I've had the problem with are in the 500 - 900 MB range, and from commercial sites as well as most recently with a zip file containing photos from a friend which he uploaded to dl.dropbox.com ... attempted it numerous times, after trying the various suggested "fixes", and each time at around 255 MB, the download quits, with the error that file cannot be read from the server.
The various proposed solutions I've found on the web -- resetting the user configured options connected to downloads in FF config (about:config); deleting the compreg.dat file in the FF profile folder, don't pause the download (never have done this) etc.
Others have opined that the problem is flaky intermittent WiFi, or Security/Anti Virus software interfering with FF's accessibility to the file during the download; or a caching problem at one's ISP -- HOWEVER Safari doesn't experience this problem at all. Each time that I've experienced it in FF, I launch Safari, and can download the file completely without any errors.
Would really like to see someone from Mozilla respond to this ... lots of us are experiencing it.
Whatever happened to Netscape's ability to recover from download interruptions and resume a download at the point where it had been interrupted (like when a dial up modem dropped the line in the middle of the download) -- sure would be useful to see that feature come back in FF.
Thanks,
Muiz

Log-Entry: 'Warning: LDAP: query accept could not be found'

I found many entries like this:
Thu Mar 13 12:45:30 2008 Warning: LDAP: query accept could not be foundin our log 'mail.current'.
We don't use LDAP (anymore). Where do I have to check if we have missed something what should be de-activated?
In the GUI 'System Administration', 'LDAP' I have the following entry:
Server Profile Host Name Port Queries
Profilename 1.2.3.4.,1.2.3.5 389 None configured
How can we prevent this warning-entries in the logfile?

On the GUI interface, go to "Network > Listeners".
Select the inbound listener. At the bottom, make sure the LDAP queries are all set to None. You may also want to delete your ldap profiles if you're not using them anymore. "System Administration > LDAP"
If that doesn't address the warnings, contact Technical Support so they can further investigate it.
I found many entries like this:Thu Mar 13 12:45:30 2008 Warning: LDAP: query accept could not be foundin our log 'mail.current'.
We don't use LDAP (anymore). Where do I have to check if we have missed something what should be de-activated?
In the GUI 'System Administration', 'LDAP' I have the following entry:
Server Profile Host Name Port Queries
Profilename 1.2.3.4.,1.2.3.5 389 None configured
How can we prevent this warning-entries in the logfile?

SQL 2005 v9.0.2047 (SP1) - The query processor could not produce a query plan

Hi Everyone:
*Before* I actually call up Microsoft SQL Customer Support Services and ask them, I wanted to ping other people to see if you have ever ran into this exact error
"Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I would have searched the forums myself, but at this moment in time, search is broken :(
If anyone has run into this error before, what conditions would exist that this could happen? That is, if I can sniff this out with suggestions from the community, I would be happy to do so.
It is an oddity because if I alter a couple subqueries in the where clause [ i.e., where tab.Col = (select val from tab2 where id='122') ]to not have subqueries [hand coded values], then the t-sql result is fine. It's not as if subqueries are oddities... I've used them when appropriate.
fwiw - Not a newbie t-sql guy. ISV working almost daily with t-sql since MS SQL 2000. I have never seen this message before...at least I don't recall ever seeing it.
Thanks in advance for other suggested examination paths.

This code also produces the error... the text is from an incident a while ago that I reported to microsoft.
--I just found a way to break the query engine. Looks like the SQL Server team missed something. I was generating phony data for test cases, by the way.
--Bad code:
DECLARE @t_Asset TABLE
(Asset_Id INT)
INSERT INTO @t_Asset (Asset_Id) VALUES (1)
INSERT INTO @t_Asset (Asset_Id) VALUES (2)
INSERT INTO @t_Asset (Asset_Id) VALUES (3)
DECLARE @Record_id INT
,@File_id NVARCHAR(MAX)
,@SKP_Cust_id NVARCHAR(MAX)
,@Unique_Barcode NVARCHAR(MAX)
SELECT @Record_Id = (SELECT TOP 1 Asset_Id FROM @t_Asset)
, @file_id = (SELECT LEFT(REPLACE(CAST(NEWID() AS NVARCHAR(50)), '-', ''), 10))
,@Unique_Barcode=(SELECT LEFT(REPLACE(CAST(NEWID() AS NVARCHAR(50)), '-', ''), 15))
go
--Msg 8624, Level 16, State 116, Line 12
--Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services.
--Code that doesn’t fry the optimizing engine:
DECLARE @t_Asset TABLE
(Asset_Id INT)
INSERT INTO @t_Asset (Asset_Id) VALUES (1)
INSERT INTO @t_Asset (Asset_Id) VALUES (2)
INSERT INTO @t_Asset (Asset_Id) VALUES (3)
DECLARE @Record_id INT
,@File_id NVARCHAR(MAX)
,@SKP_Cust_id NVARCHAR(MAX)
,@Unique_Barcode NVARCHAR(MAX)
SELECT @Record_Id = (SELECT TOP 1 Asset_Id FROM @t_Asset)
SELECT @file_id = (SELECT LEFT(REPLACE(CAST(NEWID() AS NVARCHAR(50)), '-', ''), 10))
SELECT @Unique_Barcode=(SELECT LEFT(REPLACE(CAST(NEWID() AS NVARCHAR(50)), '-', ''), 15))

ORA-00600: internal error code, arguments: kkqctmdcq: Query Block Could Not

Hi,
I found a error in my alert log file:
Problem Description: problem found on node 1 and node 3 : Alerts ORA-00600: internal error code, arguments: [kkqctmdcq: Query Block Could Not], [], [], [], [], [], [], []
database details:
OS : Linux x86-64
DB: Oracle 10g 2.0.1.0 Production
Please give me your suggestions.
Regards,

Hi,
I would suggest to open a SR with OSS.
From MOS see Note 153788.1 .
Usually patching will suffice.
Regards,

Error Master Type definition could not be found : FPGA

I am having similar/exact error condition as in the below post..
http://forums.ni.com/t5/LabVIEW/Error-Master-Copy-for-Type-Definition-Could-Not-Be-Found/m-p/1496866...
The *.lvbit file i am using was compiled in Labview 8.2.1 and I am now using 2009 version of Labview. Unlike the suggested solution, recompilation of *.lvbit file is ruled out due to lack of source code access.
Any help towards troubleshooting is appreciated...

Because I am a bad scientist, I do not know exactly what fixed my problem because I changed more than one variable at once.
Here's what I did:
Removed auto-populating folder from project (doubt this mattered, still broken after this)
Changed my open FPGA VI reference from using a bitfile to using a VI, selected my FPGA VI, NO MORE BROKEN RUN ARROW! YAY.
The above finding led me to go look at my FPGA bitfiles on disk -- I had two of them (weird). Usually a compilation just overwrites the older file.
Just in case the names give any insight, they are:
Older: NASATTRControlCo_FPGATarget_FPGAMain_25B3817B.lvbitx
Newer: NASATTRControlCo_FPGATarget_FPGAMain_25AF817B.lvbitx
I went back to my open FPGA VI reference, and selected the most recent bitfile that I compile this morning -- No more broken run arrow.
I have a feeling this may be due to selecting an old bitfile, but usually if the bitfile doesn't include the control, it won't show up in the read/write control node. If anyone from NI would like to comment on this I'd appreciate the insight on what may have happened.
I am wondering if it's because I installed 2010 SP 1? Who knows but it's fixed now.
CLA, LabVIEW Versions 2010-2013

Ipod could not be read from or written to but charges? Please help!

My 1st gen ipod nano is about a year old and have had no problems. Now when I connect my ipod it immediately states, "Attempting to copy to disk 'Mary's Ipod' failed. The disk could not be read from or written to." But it still charges my ipod. Please help!

Did anyone help u out or did you figure out the problem I am havin the same problem. The songs that were already on my computer transfered fine but disc i try to import and songs I buy will not go on and i get the same message if you know how to fix this please help if not I will definitly contact u when i figure it out if i ever do......

The query processor could not produce a query plan

I'm getting this message:
Msg 8624, Level 16, State 17, Line 1
Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services.
This is what I run
;WITH TableA AS
SELECT 101 as A_ID
,TableB AS
SELECT 1 as B_ID, 101 as B_A_ID , 'xxx' as B_Courses
UNION ALL
SELECT 2 , 101 , 'YYY'
UNION ALL
SELECT 3 , 101 , 'ZZZ'
UNION ALL
SELECT 4 , 102 , 'AAA'
SELECT
A_id
,x.x.value('(./text())[1]','varchar(500)') AS fieldX
FROM
TableA AS A
OUTER APPLY
-- CROSS APPLY
(SELECT
',' + B_Courses
FROM
TableB AS B
WHERE
1=1
AND B.B_A_ID = A.A_ID
FOR XML PATH(''),TYPE
) x(x)
With OUTER
APPLY, I get the message shown above.
With CROSS
APPLY, everything works nicely.
I resolve by adding in select this :
STUFF((SELECT ','+B_Courses
FROM
TableB AS B
WHERE
B.B_A_ID = A.A_ID
FOR XML PATH(''),TYPE).value('(./text())[1]' ,'VARCHAR(500)'),1,1,'')
Tested on:
Edition ProductVersion ProductLevel
Express Edition 9.00.3042.00 SP2
and
Edition ProductVersion ProductLevel
Developer Edition (64-bit) 11.0.2100.60 RTM
Any idea way is this happening?
Thanks

Is the below working for you?
;WITH TableA AS
SELECT 101 as A_ID
,TableB AS
SELECT 1 as B_ID, 101 as B_A_ID , 'xxx' as B_Courses
UNION ALL
SELECT 2 , 101 , 'YYY'
UNION ALL
SELECT 3 , 101 , 'ZZZ'
UNION ALL
SELECT 4 , 102 , 'AAA'
SELECT
A_id
-- ,x.x.value('(./text())[1]','varchar(500)') AS fieldX --Commented this part
FROM
TableA AS A
OUTER APPLY
-- CROSS APPLY
(SELECT
',' + B_Courses
FROM
TableB AS B
WHERE
1=1
AND B.B_A_ID = A.A_ID
FOR XML PATH(''),TYPE
) x(x)

Data Driven Subscriptions Error - the query processor could not start the necessary thread resources for parallel query execution

Hi,
We are getting the following error when certain data driven subscriptions are fired off: "the query processor could not start the necessary thread resources for parallel query execution". I've read other posts that have the same error, and
the solution usually involves adjusting MaxDOP to limit the number of queries that are fired off in parallel.
Unfortunately, we cannot change this setting on our server for performance reasons (outside of data driven subscriptions, it negatively impacts our ETL processing times). We tried putting query hints like "OPTION (MAXDOP 2);" in the reports
that are causing the error, but it did not resolve the problem.
Are there any settings within Reporting Services that can be adjusted to limit the number of subscriptions that get fired off in parallel?
Any help is appreciated - thanks!

Yes, that is correct. It's a painful problem, because you don't know which specific subscription failed. For example, we have a data driven subscription that sends out about 800 emails. Lately, we've been having a handful of them fail. You don't know
which ones out of the 800 failed though, even from the RS log files - all it tells you is that "the
query processor could not start the necessary thread resources for parallel query execution".
Thanks, I'll try changing <MaxQueueThreads> and will let you know if it works.
On a side note: I've noticed that it is only reports with cascading parameters (ex. where parameter 2 is dependent on the selection from parameter 1) that get this error message...

Cannot sync, error message "could not be read" for an iPod no longer in use

I have two problems. I upgraded iTunes to 7.2 and the very next morning my iPod died. It is completely unresponsive. Maybe it's coincidental. So I bought a new 80 gig iPod and gave it a different name than the old dead iPod. Now when I try to sync the new iPod, it goes for about 10 minutes, then it fails with this message:
Attempting to copy to the disk "old iPod name" failed. The disk could not be read from or written to.
It is complaining that it can not read the old dead iPod that is NOT hooked up to the computer! Somehow, minutes into syncing, iTunes has forgotten which iPod it is looking at. I have seen the article about the "cannont be read" message and it is not relevant. I need to make iTunes forget about the old dead iPod so it will stop looking for it. I've tried removing the files from "Documents and Settings" but iTunes still remembers the old unit. Where else does it store information? Any recommendations?
Windows XP

Attempting to copy to the disk "old iPod name" failed. The disk could not be read from or written to.
It is complaining that it can not read the old dead iPod that is NOT hooked up to the computer!
Okay, that can sometimes be caused by a Windows drive letter confusion. For troubleshooting advice on that possibility, see the following document:
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear

IPod Error Message: "The disk could not be read from or written to."

Hello!
I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
Any help would be greatly appreciated. Thank you in advance. ^_^
PowerBook G4 Mac OS X (10.4.3) 15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 Generation

Okay I went thru that entire list and here's what I got...
(1) My OS is XP and is running fine.
(2) I've updated my windows
(3) I don't know of any software that might be interfering.
(4) There are no damaged files.
(5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
(6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
(7) The USB cord is firmly connected into my USB port and my iPod
(8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
(9) I will try another USB cord to see if that works.
Is there anything else that I can do? Can Apple fix this?
Please let me know.

IPod cannot be synced because external hard drive could not be read

I moved my music folder to an external hard drive to create space on my laptop, and changed the location under Preferences / Advanced. Since I did this, my iPod trys to automatically sync but gives the error message "The iPoD "[name]" cannot be synced. The disk could not be read from or written to." The external hard drive is on and working. Is there some reason that the iPod will not sync with this external hard drive? What do I need to do to fix it? Thanks, Bill

First question, since you made
the change, can you still play your music from within
iTunes?
Patrick
Sorry for the delay in answering as I have been traveling. Yes, I can play music from iTunes. The music is located on my external hard drive. iTunes software is on my laptop, and the music library points to the music folder on my external hard drive.
Thanks, Bill
Dell Laptop Windows XP

Query definition could not be read BRAIN252

Similar Messages

Maybe you are looking for