Query Description not displaying in Bex Template

Hi all,
I have created a Template in Bex Analyser in the Design mode of a Workbook. I have assigned this workbook template as the Default Template for all the Queries by selecting it in Global Settings. I closed this workbook template and opened a query. I am getting the template embedded in the query as i designed but the problem is the Query Description is not displaying correctly. In the Query, it is showing the Workbook Description in the header instead of Query Description.
Where should i change it? Help me in fixing this. Thanks.
Regards,
Murali

Hi,
you should use an Info Field WebItem to display the query name or description in your Webtemplate.
Parameter in InfoField: General Text Elements for a Data Provider (GENERIC_TEXT_ELEMENT).
You use this parameter to choose the generic text element that is to be displayed:
● Query Name (QUERY)
● Query Description (QUERY_DESCRIPTION)
http://help.sap.com/saphelp_nw04s/helpdata/en/47/96784226d1d242e10000000a1550b0/frameset.htm
Regards
Andreas

Similar Messages

Query description not displaying in Workbook after upgrade

Hi,
I have saved my existing 3.5 workbook in 7.0 format. The query is also saved in 7.0 format. But after the upgrade the workbook on refresh is not populating the Description and Filter details of the query.
Appreciate your valuable inputs.
Thanks in advance.
Prakash C

Hii
The workbook is work as an Excel sheet & also in the same format & restrictions that u have made while executing the query.And it shows the description as the name u give to the workbook
but shows the same Query name inside the workbook.
If description is not displayed then just disconnect the analyzer and connect it again.U will get the description also.
Thanks
Neha

GL Account description not display..

Hello Friends,
    In Account Assignment Frame .. GL account Description and Assigned to description not display.. any one facing this problem?
   Thanks,
   John.

Hi John,
Can u elaborate on your problem.
There is a BADI which is used to change the document.
BBP_DOC_CHANGE_BADI,This BADI can be used .
To get the GL account details.
You can use FM 's can be looked at.
META_GLACCOUNT_GETDETAIL       Get Details from G/L Account
META_GLACCOUNT_GETLIST         List of G/L Accounts
Incase this does not solve your issue,please write your problem in details.
Your statement does not make your problem clear whether it is appreaing in SC or PO and what scenario you are implementation and what is your support pack level.
regards,nishant
please reward if this helps

KF value is not Displayed in BEx Report ..where as cube, mpro end ok..!!

Hello Experts,
I ran a bex report. In that report KF some NetsSalesValue has not displayed in the BI Report for all the Sales Organiations where as other KFs has displayed the value for all the Sales Organizations.
For that i checked my end. BI report is pulling data from Cube --> Multiprovider --> Bex Report.
I myself checked KF value into Cube level, multiprovider KF level value is avaialable.
And also i checked, in the query properties is there any filters, RKF, CKF, but...i found the KF is a basic KF.
And also..i checked the whether the rollup has happened..properly or not and ran the query but no use.
For your info upto 3 days..back KF value has presented in the report. After that only this issue has encounterred.
I am in confusion where the exact issue will be.
If any body faced this kind of scenario is your project, kindly reply me.
For any more clarifications i will respond you immediately.
Thanks,
SN

Hi,
check aggregates,index etc for cube
check key figure selection as well in Multiprovider for respective Infoprovider
just create test query on Infoprovider and then on Multiprovider and see..
Check RSRT - regenerate the query
also see there are various options like execute+debug has ....just check them
Thanks and regards
Kiran

Description not displayed when loged in with different language

Hi
We have created some queries Loging in english language . When we use a different language for logon say Portugese 'PT' the discription of the query is not dispalyed instead the technical name is displayed. This issue is same for all objects ( Infoproviders , Infoobjects etc .) .Is there any setting that should be maintained so that the object's description created in one language can be seen by login in with a different language .
Thanks in advance,
Biyaz

yes I also working fro dutch clients
and they have develped everything in Dutch language
so whn I log on in En language I don't see desccription in English.
there is no setting by which u can see description of custom object. but for standard object we are able ti see description in English language
assign points if useful

Key figure description not show in BEx and WAD sometimes

Hi experts!
I have a big problem. Sometimes we have the effect that a report shows no key figures. I mean I see the numbers but no key figure description is shown.
Example (correct)
Country |    Hierarchy   |        Banking      |         ATM       |      ....
Germany |   Key figure 1 |           1.000     |         500       |      ....
        |   Key figure 2 |                27   |           9       |      ....
        |   Key figure 3 |                27   |           9       |      ....
        |   Key figure 4 |                27   |           9       |      ....
Example (wrong)
Country |    Hierarchy   |        Banking      |         ATM       |      ....
Germany |                |           1.000     |         500       |      ....
        |                |                27   |           9       |      ....
        |                |                27   |           9       |      ....
        |                |                27   |           9       |      ....
We can solve the problem if so we deleted the query from the cache but that is not really a good solution.
Any suggestions?
Regards, Thomas

Hi Thomas,
I have a similar problem in WAD. After applying Patch 19, the Key Figures descriptions do not display in certain reports.
From Query Designer, everything is OK.
Could you fix the issue?
Jean-Luc T.

Workbook with changed query does not display the changes...

Hi,
I have a problem with a workbook with one query in - the query has been changed, but the new added keyfigures are not displayed in the existing WB.
I know from Bex 3.5 there is the option on WB settings "return to global definitions" - I miss this functionality in BI 7.0.
My installed sap gui is version 710
Please let me know where I can switch on this feature...
regards
chris

If you use "Return to Global Definition on refresh" option, all the users would have to have it turned on in their workbooks. In that case won't they lose any settings/navigation the user did, specific to their need. All the workbooks end up being the same in that case.
We are still running on 30B and starting the upgrade to BI70. We just went through training on the new BEx analyzer, and I have to agree with you that some of the useful features of BEx 3X will be missed. Specially in the area of Workbook support, things like Copy query, insert query etc are missing as well.
Thanks
Vineet

Dynamic page in region as a portlet not displaying in portal template

As the title suggests I have a portal template that contains a region at the top . within this region i have included 2 portlets, first is a dynamic page (a simple banner title ) then a navigation page beneath them .
when I am logged in as a specific user it displays correctly , when I log onto the page without logging in - the dynamic page does not display ,yet the navigation page does . I have clicked on every display to public check box , assigned public user with view privilege and everything else along those lines . Any ideas ??
thanks in advance , Chris

Hi Chris: Just to be specific, did you go to the providers tab in Navigator, the locally built providers link then the provider which contains your dynamic page and check the access set directly on that page? You can either set the dynamic page to have its own access (overriding that of the provider) or set the provider itself to be public.
Rgds/Mark M.

G/L Account Description not displaying in the report

Hi Friends,
G/L account description was not found in the report, after loading g/l text and attribuites. Please help me what might be the problem in this regard.
Regards,
Raju..

Is G/L Account depends on Chart of Accounts. Is their any way that G/L acount and description is displayed in report. G/L Account is appearing but not descrition. Master data attr & text loaded fine.
Raju

Roles not displayed in BEx Analyzer for NW2004s

We are evaluating a technical upgrade only from BW 3.5 to Netweaver2004s. Under this plan, the 3.5 security will not be migrated to 7.0. We are using SAPGui Frontend 6.40 for BI. The existing BW 3.5 roles are not display in the Role Menu of SAP NetWeaver BEx.
Any ideas on this?
Isbell

Got the following response from SAP and this resolved the issue
please add the parameter
DELETE_DOUBLE_TCODES with PATH = 'NO'
into the table: ssm_cust (via tx: se16)
The settings in SSM_CUST defines a compress mechanism for the user menu
known as "Redundancy avoidance" and described in notes 357877 and 357693
Redundancy avoidance deletes easy access menu entries for doubled
transaction codes whenever SSM_CUST contains
1. an entry CONDENSE_MENU with PATH = 'YES' and
2. either an entry DELETE_DOUBLE_TCODE with PATH = 'YES' or no entry
DELETE_DOUBLE_TCODES, at all.
If you don't want doubled transaction codes to be deleted, then simply
add an entry DELETE_DOUBLE_TCODES with PATH = 'NO' into table SSM_CUST.
Suresh

Query does not display the code.

Hi Experts,
I created a query joining SKA1 and SKB1 with the following requirements:
Query of the chart of accounts total for each company code with the following additional information:
- reconciliation list: yes or no / for which sub-ledger (cutomer, accounts payable, assets or others)
- binding on interim transaction: yes or no.
I have successfully created a query but instead of displaying the code (for example AA01-company code) the name of the company was displayed.(example: ABS Company) this is also the same with other fields like the GL account, instead of displaying the numerical value, the text description was displayed even if I have selected the correct field assignment (SKB1-BUKRS).
Your inputs are very much appreciated. thanks in advance!

Hi,
Are you creating this query under SQVI TCode?
Because when i am doing the same thing... its working. i can see he company code coming up as AA01.
SKB1-BUKRS is for Company code number... then how it can display Company code Description.
Best Regards
Guneetinder

SQL*Developer 'Query Results' Not Displaying

I have just recently installed SQL*Developer v3.2.2 and after I run a SQL query the tab 'Query Result' tab is not displayed. I have tried to show this tab and to use the arrow keys at the bottom of the screen to display this screen but I cannot view the query results. I have used v1.5.1 in the past and know that it should display when after running a query and can be resized if required but I cannot seem to show it is v3.2.2

Hi,
Yes, I did install to a clean directory. I have even deleted all contents of the directory and re downloaded
the software again to the same directory but this did not work either it still remembered the original settings.Keep in mind there are two locations that an installation updates:
1. The SQL Developer installation directory (which you deleted).
2. The User-Related Information (in your "user home" directory), which is updated by the settings migration
Perhaps Jim meant you should also remove the user settings for the last SQL Developer version installed and possibly even avoid migrating the old 1.5.x settings when you first start SQL Developer after that. See the following forum thread, probably unrelated to your situation, but containing where to find the location of user-related information in the Help:
Re: IDE issue - Query Result grid is not selectable or scrollable
Hope this helps,
Gary
SQL Developer Team

BEx Query: Attribute not display Unit of Measure (UOM)

In a BEx I am trying to create a query that displays attributes to 0EMPLOYEE. One of the custom attributes is the employee's rate of pay. We have the hourly rate, nightly rate, etc. This attribute is a numeric attribute with currency assigned as the Unit of Measure. I am trying to create a query displaying the pay rates from the attributes of 0EMPLOYEE but remove the unit of measure in the output. I am aware this can be done on key figures using the NODIM formula. How can I remove on an attribute?
Example: Output is $10.25 UOM. I want it to display as $10.25.
Thanks.

Hi,
Create a Formula Variable with Replacement Path for this Attribute.
Use NODIM function for the Formula Variable.
Let me know if it works according to your requirement.
Regards,
Geeta

Using 2 BEx query structures - Not displaying as a hierarchy

Gurus,
I have CR2008, and I am using a BEx 7.0 query that has 2 structures. One structure is key figures, the other is a layout that I turn on and display as a hierarchy. There is cell definition behind the query.
How can I get this second structure to view as a hierarchy in Crystal? The cell definition is calculating correctly in Crystal, however all of the Profit Centers show on the same line, without indentation.
If I create a Profit Center hierarchy in BW and bring it into Crystal, then I cannot use the cell definition, which is needed to calculate the correct results.
Thanks in advance for responses.
Scott Friery

Help please!! I really need some guidance for this problem? Can I manually modify how the structure looks once I bring it into Crystal and drop into the "Details" section of the designer?
The structure from the BEx query looks like this in Crystal:
Global Sales
Western Region Sales
Location 1
Location 2
Location 3
Eastern Region Sales
Location 4
Location 5
Location 6
I want the structure to look like this (and it does in the BEx 7.0 query designer)
(No Indent) Global Sales
       (Indent 1 Space )Western Region Sales
          (Indent 2 spaces) Location 1
          (Indent 2 Spaces) Location 2
          (Indent 2 Spaces) Location 3
       (Indent 1 Space) Eastern Region Sales
            (Indent 2 spaces) Location 4
            (Indent 2 spaces) Location 5
            (Indent 2 spaces) Location 6
Any help is appreciated.
Scott
Edited by: Scott Friery on Feb 24, 2011 8:07 PM

Variable Screen Does Not Display in Bex Web Analyzer after first time

We recently upgraded from BW 3.1 to BW 7.0 (without upgrading specifically to 3.5). We are having a problem with our Web Bex Analyzer not showing the variable screen although the variable screen is displayed successfully when running the same query from the Bex Analyzer. Based on feedback from other posts regarding similar topics, we modified the 0analysis_pattern template to ensure that Display Variable Screen was checked on. We are finding that when we open the Web Bex Analyzer and do a New Analysis, the first query we try to run will always have the variable screen displayed successfully. Any susbsequent queries we try to run by clicking on New Analysis in that same open window will not show the variable screen and will start executing open ended. This is occurring regardless of whether the query has mandatory or optional variables and we have confirmed that there is no personalization set for the variables being used. We have tried it with several different queries and the results are consistent. The first query you run shows the variable screen successfully and any queries run after that do not. Any help in resolving this would be greatly appreciated as we have exhausted our resources researching and troubleshooting this problem.

We did open an OSS note and heard back from SAP. We made the recommended setting, see their response below, but as they stated, it will only show variable screens for queries that have at least one mandatory variable entry after the first query is opened.
Response from SAP:
Please check if the following setting is made within your template --
In the 'Standard Actions' of the Web Template, do you have the setting
'Action Before First Display' set to OPEN_VARIABLE_DIALOG
The behaviour of the variable screen is different if you use mandatory
variables and optional variables. If you have only optional variables,
the Display Variable does not force the variable screen.
Also, using the parameter VARIABLE_SCREEN=X only influences the
web application at STARTUP. This would not come into affect when you
use the 'New Analysis' button. This button resets the dataprovider so
this would not affect the variable screen and would not redisplay the
variable screen as you require.

Query Description not displaying in Bex Template

Similar Messages

Maybe you are looking for