Query Designer / Analyzer

I want to create a worksheet pulling data from different hierarchy points and different key figures.
Can I have several preselected profit centers within one query for different structures?
Can I have several queries embedded into one worksheet in BEx Analyzer?

Hi
Can I have several preselected profit centers within one query for different structures?
Yes you can restrict the required Profit centers
Can I have several queries embedded into one worksheet in BEx Analyzer?
In the way of Work book you can save more than one report on the same sheet but not more than one query in one work sheet.
Regards
M.A

Similar Messages

Unable to open query designer while able to access BI system

Hi Experts,
   I have problem while opening query designer, analyzer , WAD . I get the below error. But when i access the relevant BI system i am able to access it well , i dont get any RFC Error. Will there any port setting for query designer separately. This is problem faced at offshore which connects to client servers at onsite. Onsite guys are not facing any issues openning query designer or analyser. Please guide as i am not good in basis ..
RFC_ERROR_COMMUNICATION
Message
CMALLC : rc=27 > Connect from SAP gateway to RFC server failed
Connect_PM GWHOST=163.164.XX.XXX, GWSERV=sapgw00, SYSNR=00
LOCATION    SAP-Gateway on host XXXXXXX/ sapgw00
ERROR       timeout during allocate
TIME        Mon Sep 12 14:20:38 201
RELEASE     700
COMPONENT   SAP-Gateway
VERSION     2
RC          242
MODULE      gwr3cpic.c
LINE        2066
DETAIL      no connect of TP sapdp00 from host 163.164.XX.XXX, after 20 sec
Thanks
Vamsi
Edited by: vamsi talluri on Sep 14, 2011 6:57 PM

Hi Experts,
   I have checked with basis team , my issue is resolved, please find the solution .
1) Add corresponding system server names in host files of the offshore desktops.
2) After that basis has added offshore natted ips in sap gatewat parameter/alternate hostnames in system profile (rz10 tcode).
Then offshore are able to access query deisgner etc....
Regards
vamsi

BEx Variable defined in BI 7.0 Query Designer and using in BW 3.5 Analyzer

Hi,
I have defined a variable in BI 7.0 Query designer for a characteristic which is present in characteristic restrictions area to restrict it . Ideally when that query is executed a pop up box should be opened to enter a value of the variable. But when that query is opened in BW 3.5 BEx Analyzer, instead of pop up box the error message " Error specify a value for the Variable ' Variable Name ' " has been displayed. Please help me to resolve this problem
<i><b>Details of Variable:</b></i>
Type: Characteristic Value
Processed by: Manual Entry/Default Value
Variable is : Mandatory
and Ready for input
No default values are defined for this variable.
Thanks
Hari Prasad.

Hi,
Once a query opened and changed in the BI7.0 query designer u can not use the same query in lower version.
Thats the reason the error message coming.
If u need the 3.5 query just keep as it is , and copy the same query in different name and open it in the BI7.0 and do the changes.
Thanks,
Debasish

Cell definition in Query Design within Bex Analyzer

Hello,
I would like to use special cell definition to visualizing the difference row definition between 2 columns (last year and actual year). With "Cell Definition" function in Query Design within Bex Analyzer there's a option to select a new restricted key figure for a related cell. But as a result I just can see a star (*) against a result number in that field. Do you have an idea, how can I solve this problem?
Thanks and Regards,
Nuran

Hi again Dirk,
there's not a unit problem. We use 2 different restricted key figure definition for a same row. The first restricted (or can be decribed as calculated key figure) key figure must be used in the first column to represent the value of the last year. And at the same row with usage of same text (for example: cost of goods sold)the second restricted key figure should be used to show the value of actual year (B2:costs in euro). The problem is the key figure definitions are totaly different; they're using different account groups etc. Cause of, I wanted to use cell definition function. In the first value field (B1) should be shown first key figure but I just get star (*) and a wrong value in the formula field of excel (between the toolbars and the result area).
Thanks for your reply.
Nuran

Quantity is Showing Blank : Bex Analyzer, Source - Bex Query Designer

Hello Expert SAP BI,
I Extracting Data from Flat File,
Till then Cube My Transaction data Loaded Perfectly ,
i want to create Report in Bex Analyzer, fetching fields from Bex Query Designer.
Characteristics are showing in Rows , that showing in Report , but in Columns added Key Figure , its not showing in Report .
Can any one Suggest , what will be issue and how i have resolve it.
- Thank you.

Datasource -> Transformation -> InfoSource
Infosource -> Transformation -> DSO
DSO -> Transformation -> Cube

Execute button for BEx Analyzer in the Query Designer

Hello,
My current BEx Query Designer 7.1 and we are using Excel 2003. Currently, I can execute query through BEx Web but I am also looking for green check button of BEx Analyzer also. Could you please tell me how can I incorporate/add this BEx Analyzer check box in Query Designer so that I can execute query both in BEx Web as well as BEx Analyzer.
Thanks very much in advance.
Regards,
Md

Hello Hyma/Prasanna,
Thanks for your reply and it's solved my problem.
If I logon BEx Analyzer and open or changed query through it, I can see green check box in Query Designer. Now I can run query both in BEx Analyzer as well as BEx Web.
Regards,
Md

Bex Query Designer and Bex Analyzer not working

Hi All,
While Login to Bex Analyzer, It is giving an error "An error occured while communicating with the BI Server"
While Login to Bex Query Designer, It is giving an error "Login Aborted".
Please help me to resolve this issue
Thanks
Irshad

Hello Irshad
Not sure if it helps but can try suggestion mentioned in this note.
https://service.sap.com/sap/support/notes/1434630
If problem persists you can upgrade your SAP GUI Patch level.
Still facing problem, please contact SAP .
Regards
Anindya

BEx QUERY DESIGNER AND QUERY ANALYZER

HI!!!
I want to learn to use the BEx Query Designer and the Query Analyzer, someone can help me with link, manuals, tutorials, cookbooks, everything about this?
Thanks and regards

Hi,
Please check the links below which may help you.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/a8cd1f71-0a01-0010-4783-f119b6132d25
https://www.sdn.sap.com/irj/sdn/bi-elearning
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/ba95531a-0e01-0010-5e9b-891fc040a66c
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/27388d45-0c01-0010-9ebf-9b3dd7bd4ce6?prtmode=navigate
http://help.sap.com/saphelp_nw04s/helpdata/en/05/4b583cf7388362e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92a25985-0a01-0010-5ea0-99ff9e0a244a
http://help.sap.com/saphelp_nw04s/helpdata/en/42/d21c1f46076bb2e10000000a1553f6/frameset.htm
Regards,
®

Launching BeX Analyzer from BeX Query Designer

Hi,
We are using BeX Frontend version 7.x.
In the Query Designer, when you presss the 'Execute' button, it generally opens the report on the web (calls the portal). Is there any way to change this so that when you press 'Execute', it runs the report on the BeX Analyzer?
Best Regards,
Rajib

Hello...
I regret to inform you, there is no way to do such a thing.
You cannot call via "Query Designer" the "BEx Analyzer".
I don't thing my suggestion is very helpful, but as workaround, you can call via SAPGUI, with transaction RMMX.
I personally suggest you to install and use the BI Java stack, since the BI 7.0 addons was designed to work together with an BI Java Portal.
Thanks...
Best regards,
Edward John

Infoareas do not at Query Designer and Analyzer

Dear frieds,
We are do not see the infoareas at Query designer and analyzer ( BW Quality ), in DEV is all right, what's happening ?
OBS: The user autority is equal in all clients.
Thanks.
Fabrício

Hi,
Are you not able to see any of the info areas or only some specific infoareas?
Regards
Akhan

User profiles for analyzer and query designer

Hello,
I have one short question about user-profiles.
Which user-profile should I best use for a user, who should just use the BEx Analyzer and which profile does a user need for using BEx Analyzer + BEx Query Designer.
Thanks

I just need the SAP-Roles which allows a user to use Analyzer and Query Designer.

Errors in BeX Analyzer and Query Designer NW2004S

Hi All, these are the problems -
1) We have installed the FrontEnd and applied SP 1. But when I am trying to
use the Analyzer, the Menu Options are not working. Please give us a
solution to this problem.
2) In Query Designer, when we do drag and drop, the query designer hangs and we need to close the query designer .
3) In Query Designer, if we try to make some changes to an existing query and try to save
we have the following error message -
'Terminate - The system tried to insert a data record, even though a
data record with the same primary key already exists.
Terminate - Program error is class SAPMSSY1 method: UNCAUGHT_EXCEPTION'
Any help will be appreciated.
Best Regards,
Rajib

Hi
The Frontend version is 7.1. So far as I know, only SP 1 is available for version 7.1.
I have got answer for Question 1 - Answer is in SAP Note 1025122.
Still the other questions are unaswered.
Thanks, Rajib

Different in viewing the query in query designer and bex analyzer in BW Prd

hello...i transported the query from bw dev into bw prod successfully. when i view the query using query designer in prod, the query is the same copy of query in bw dev and QA but when i view the same query under the bex analyzer in prod, the query is not the same.
the correct query should be able to see 3 mandatory variable input but when i view it under the bex analyzer, only 1 mandatory variable can be seen here. Whereas when i view it under query designer, i can see the 3 mandatory variable being define there. And this query is assigned in one of the role as well.
any idea on this? thanks!!!

i checked in rsrt in sap, the personalization of the variable is not in yellow color, i can see the 3 variable in bex analyzer but the other 2 variable which is a mandatory field input for that query appear as optional variable input instead of the mandatory field input...

Link to Web Analyzer from rsrt or query designer does not work.

If I start with the transaction RSRT a query in the Java Web would get the following error message:
Java Runtime Error
But if I had started earlier browser, the portal there is no problem. Is this a SSO problem?
The same problem I have when I would run in the Bex Query Designer the query.
Greetings
Kerim

Hi,
Do you have all the parameters correct in SPRO? Take a look at this, under the BW Customizing -> REporting relevant settings or BW Customizing -> SAP Web Application Server.
I dont remember the right place where you have to configure this, but it should be there.
The error is just "Java Runtime Error"? Try to talk with your Basis team, maybe there is a log to help you.
Regards, Federico

Error while trying to Open and Delete a BEx Query in Query Designer.

Hi Experts,
I have been facing this issue with BEx Query in Designer mode for a couple of days now in Development Environment in BI 7.0.
I would like to Delete an unwanted BEx Query because I need to give it's name to another BEx Query.
Whenever I try to Open this Query in BEx Query Designer to Delete, it gives out an error saying:
"An error occurred while communicating with the BI server.
As a result of this error, the system has been
disconnected from the BI server.
Detailed Description:
STOP: Program error is class SAPMSSY1 method : UNCAUGHT_EXCEPTION
STOP: System eror in program CL_RSR and form GET_CHANMID-01 - (see long text)"
Details text is as below:
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
I have tried with SAP Note 899572, but still it's the same.
Has anyone faced similar issue? Could you please let me know if you have better ideas or solution?
Your time is much appreciated.
Thanks,
Chandu

Arun - Thanks a million. You saved me Nine. It worked.
Could you also please tell me how to rename (Technical) a Query or is it still "Save the Query As" the only way...?
Points already assigned.
Thanks,
Chandu

Query Designer / Analyzer

Similar Messages

Maybe you are looking for