Query Designer: Error-msg: Please enter a valid value for charact 1FORMULA

Hello BI friends,
when I open a query in the Query Designer (or change query from BEx Analyzer) I get this message. There is no detail description for the message. After pressing the OK-button in the message I get an u201Demptyu201D Query Designer (to create a new or open a query).
The query contains some formulas, I know. I have checked the query by starting it via RSRT and debugging. There is only a warning (exception contains a non-numeric value).
But how can I check the formulas, exceptions or something else if the Query Designer doesnu2019t show the query definition?
Thanks in advance!

Hello Karen,
thanks for your answer.
Unfortunately I didn't mention yet that we have BI 7.0, but I'm using a 3.x query and 3.x QD. The query has not been transfered to 7.0 level (I hope it, since other colleagues work in the system too). How can I check the level (3.x / 7.0) of the query?
I have checked the table RSZRANGE, but I didn't find any row for the char. 1FORMULA, I have checked the fields IOBJNM, FACIOBJNM and ATTRINM. I also didn't find a row for RSRREPDIR-COMPUID = RSZRANGE-ELTUID. Did I search in a wrong way?
I have also checked the program COMPONENT_RESTORE, but I didn't start it for the IProv, comp type = REP and the special query, because I'm not sure what I'm doing there exactly (the program has no documentation).
Is it still the same way as you have described under these conditions?
Best wishes
Britta

Similar Messages

Error in MDDataSetBW.GetCellData.Please enter a valid value for character

Hi All,
We have a mandotory prompt on 0FISCPER for Web I Report . The promt is present in the universe.
The query works fine in Dev , but in Quality it shows the following error
A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. Please enter a valid value for characteristic 0FISCPER.. (WIS 10901)
The universe is on BW Query and the BW Query works fine.
Can someone please help on this

Thanks Sathish for your input.
We have created report level prompts and facing this issue because we were selecting multiple values for prompts.
Its working fine for single selection. Is there any way to enable multi selection for the particular object at the BW end ?
Or else we have to create the prompts (Single selection) at the universe level.
Regards,
Pranay

Cannot create RFQ : Please enter a valid value

Hi all,
Kindly help me in my problem. I was trying to create a RFQ from my RFI. However, upon clicking on the "Create Follow-on Document", the error message "Please enter a valid value" appears. This message also appears when I tried changing the RFI. Please help me. Thanks!
Thanks and Regards,
Happy

Hi All,
This was resolved after our patching
Thanks and regards,
Happy

ERROR BRAIN (599): for characteristic 0FISCPER Please enter a valid value

Hi,
Weve an BI 7.0 System with Patch Level SP12 which is previously connected to an NW 7.0 Portal System + BI Java that has SP13 installed.
Were able to create Queries and Web Templates via Query Builder and WAD for BI 7.0 and publish to portal.
Recently, weve installed a new NW 7.0 Portal + BI Java with same package level. We made the configurations for Bex via Template Installer and everything is ok.
Our reports has a 0FISCPER characteristics and when we run the reports in new portal, it displays the report. But when we want to change period and click the button created to set period, a popup opens and errors like "for characteristic 0FISCPER Please enter a valid value " displayed on popup.
#1.5#005056915E48007200000013000016D000044A7EAFACF8B0#1207807880509#com.sap.ip.bi.base.application.message.impl.MessageBase#sap.com/irj#com.sap.ip.bi.base.application.message.impl.MessageBase#bcepik#2422##sapportal_TFP_5354550#bcepik#96c2d31006c411ddae48005056915e48#SAPEngine_Application_Thread[impl:3]_31##0#0#Error#1#/Applications/BI#Plain###A message was generated:
ERROR BRAIN (599): for characteristic 0FISCPER Please enter a valid value
MSGV1: 0FISCPER
MSGV2: 200.001.#
When we change BIs Portal back to old one by changing the RSPOR_T_PORTAL table (default portal), it still works there.
What may be cause this situation as it works on one portal and not works on another?
Best Regards

Hi,
Pls chk the Note 770174 - Values for 0FISCVARNT not correct - BRAIN E 599
Symptom
In case of web templates the value help for 0FISCYEAR doesnot work
correctly. Error message
For characteristic 0FISCVARNT, enter value in permitted format
comes up
Other terms
OLAP: F4 - 0FISCYEAR, 0FISCVARNT ,
0fiscyearvalues_generate, master data read class , value help , F4
Reason and Prerequisites
Program error
The selection option sent to the method 0fiscyearvalues_generate
based on 0FISCVARNT are not porcessed and hence as null row is
inserted in the resultset that cause the problem .
Solution
BW3.0B
           Import Support Package 24 for Release 3.0B (BW3.0B Patch 24 or SAPKW30B24) into your BW system. The Support Package will be available when note 0723193 with the short text "SAPBWNews BW 3.0B Support Package 24", describing this Support Package in more detail, is released for customers.
BW3.1C (Content)
           Import Support Package 18 for Release 3.1C (BW3.1C Patch 18 or SAPKW31C18) into your BW system. The Support Package will be available when note 0723260 with the short text "SAPBWNews BW 3.1C Support Package 18", describing this Support Package in more detail, is released for customers.
BW 3.50
           Import Support Package 9 for Release 3.50 (BW3.50 Patch 09 or SAPKW35009) into your BW system. The Support Package will be available when note 0763335 with the short text "SAPBWNews BW SP09 NetWeaver'04 Stack 09", describing this Support Package in more detail, is released for customers.
This note may already be available before the Support Package is released. However, the short text will still contain the words "preliminary version" in this case.
Hope this helps,
Regards
CSM Reddy

Error messege- Please enter a valid date in Background Job

Hi all,
background job which is scheduled in sm37 is giving error for dated 01.01.2009 to 30.01.2009.
But before 31.12.2008 it was working fine
error messege-
This is happening in Production and developement client.
While running the report it showing the error messege- Please enter a valid date
One function module is used in the report for geting fiscal year from date.
it is showing the following error messege for perticular date range- 01.01.2009 to 30.01.2009.
GM_GET_FISCAL_YEAR
Error
Fiscal year variant V3 not defined or maintained for date 01.01.2009
Thanks
Susanta

Hi,
Did you put the date fields to be dynamic in your variant? i.e if in your variant you specified date range of last year, this will not work for this year and eventually give you an error message that the date is not valid...
Dev.

Encountering Error in webadi : "&Value is invalid. Enter a valid value for the Mapping column &Column"

We are having a custom WebADI, containing a field (Employee Name) which is a LOV.
The LOV has ID : Person ID, Meaning : Employee name, Description : Position Name.
There are multiple records with same Employee name but different Person ID.
If I select an Employee in the LOV which has multiple records (through different IDs), I am getting an error in WebADI:
"Enter a valid EMPLOYEE_NAME.
XX is invalid. Enter a valid value for the Mapping column EMPLOYEE_NAME"
The Query for the LOV is correct and is returning correct records.
Any pointers on this issue highly appreciated.

Hi,
The problem could be with HR security profile attached to the responsibility from where you are launching the spreadsheet. Check it once.
Thanks.

Error message - KD199 Enter a valid value when Closing the Project at CJ20N

Hi All,
As I am trying to close a Project at CJ20N I have faced an error "Enter a valid value for the settlement type Message no. KD199"
I have tried to remove the settlement rules to one of its WBS element, but I could not. System shows the same message - KD1999.
Could you pls let me know how to resolve this to close the Project.
Thank you
Chandu

Hi Chandu,
I hope you have already setlted the project, since the system will not allow you to close the project unless there is Zero balance in the project. In this case, you can live without removing the settlement rule from any of the WBS element.
If there is any need to have this settlement rule removed, I suggest to change the settlemet profile to " Do not settle" and check once again. ( If there is any cost already posted, then repost the same to any other receiver.)
Hope this helps,
Srinivas Potluri

Error in LSMW : Enter a Valid Value

Dear All,
I am Creating a LSMW for MM01 Transaction using Direct Batch Input Method
I got an error in LSMW while I start uploading saying "Enter a Valid Value" .
I am selecting 14 Views in a single LSMW.
Basic Data1 / Data2 , Purchasing , Foreign Trade : Import Data, MRP1,2,3 , General Plant 1/2 , Accounting 1 & 2 , Costing 1 & 2.
Can anybody tell me why I am getting that error.
Thanks in Advance.
Tulasi

Perform theses steps
- In LSMW read and convert only one entry from file
- go to SM35 -> select your session with that one entry
- select process , option process/foreground
- choose process
You will have that batch input run in the foreground, so you can see all the values entered to certain input fields and all the actions which take place in that screens. This way you should see which step excatly creates the error.
Regards
Marcin

MSA - creating/changing activity for bp error : enter a valid value for bp

Hello experts,
while using msa with activites, on one client for one bp
I cannot create/change an activity: error:
insert a valid value for bp
This happens only for one bp on this client,
on other clients this bp works fine.
When I look in old activites for this bp, there in activity -> detail
the field bp (hyper link) is not filled.
I think there is a problem with the incorrect bp, but in which tables
can search for this ?
Best regards
Gerd

Hi,
I assume that the BP is present in table smokna1 but not available in smokna1sht (anymore).
When creating an activity the BP selection is based on smokna1, but the field/property validation is based on smokna1sht (see error message).
But unfortunately I don't have any idea for now how to download this particular record to this site...
Regards,
Wolfhard

Error messege in Background Job(SM37) - Please enter a valid date

Hi all,
background job which is scheduled in sm37 is giving error for dated 01.01.2009 to 30.01.2009.
But before 31.12.2008 it was working fine
error messege-
This is happening in Production and developement client.
While running the report it showing the error messege- Please enter a valid date
One function module is used in the report for geting fiscal year from date.
it is showing the following error messege for perticular date range- 01.01.2009 to 30.01.2009.
GM_GET_FISCAL_YEAR
Error
Fiscal year variant V3 not defined or maintained for date 01.01.2009
Thanks
Susanta

Hi,Because this datein the past

Error Message during PO GR - Please enter a valid transaction Type

During the goods receipt movement 1010 of a Purchase Order, I am getting following error Message:
"Please enter a valid transaction Type"
I am not a Purchasing expert. Could please help?
Thanks and regards.

Hi,
Pl do below 2 things:
1 ) Go to Transaction code = OMBA , Click on Goods receipt Documen type button and check whether MIGO_GR is assigned to DOC Type = WE
2 ) Go to Transaction code = OMJJ , Tick Movement type and select 101 Movement type .
Then You need to click on "Allowed Transaction option ( Left pane ) and see whether transaction code MIGO is mentioned for Movement type 101.
it should solve ur problem.

Please enter a valid serial number error

Hi, I have tried to register Adobe Photoshop Extended cs6 Windows using the Serial Number that came with the product. Every time I tried enter the serial number I received an error message "Please enter a valid Serial Number". How come Adobe does not recognise their own serial number?

Hi Ashutosh,
I am talking about registering the product in MyAdobe not the application. The application accepts the serial number, however, online registration is not accepted. The myAdobe ID is [email protected] and the serial number is [serial number removed]. I have 2 adobe IDs how can I transfer the applications from one ID to my preferred ID and have the [email protected] ID removed? Sorry for the two questions.
[Mod note - serial number removed.]

Error message PLEASE ENTER BUSINESS AREA

Hi experts,
Facing problem while doing 531 movement for by product generation by MB1A.
Getting error message PLEASE ENTER BUSINESS AREA.
and for same material accounting document not heat.
experts suggestion need to resolve issue.
Waiting
Bhupendra

Business area is Pulled based on Division assignment
Assign the division for that material in basic data view
and then post

Please enter valid value for characteristics

Hi,
One of our user got this error when opening a query Please enter valid value for characteristics.
How do I fix this since I couldn't see any errors in SU53 and authourization logs.
thanks

Hi Bhat,
Check SAP notes : 1077144
Thanks,
Vijay.

Enter a valid value error

Hi,
Can anyone pls. help us figure out the problem with the newly created business partner master records? We get an "Enter a valid value" error message when the agent (user) tries to confirm the business partner in CIC. The user got the same error after she created another bp master record.
I created a third bp master record for the same customer but in another application server. I didn't get an error so I asked the agent to use this bp master record instead of the first 2. Unfortunately, the user got the abovementioned error again after editing the bp master record that I created in the original application server.
Hope you can help us.
Thanks in advance,
Theresa

Perform theses steps
- In LSMW read and convert only one entry from file
- go to SM35 -> select your session with that one entry
- select process , option process/foreground
- choose process
You will have that batch input run in the foreground, so you can see all the values entered to certain input fields and all the actions which take place in that screens. This way you should see which step excatly creates the error.
Regards
Marcin

Query Designer: Error-msg: Please enter a valid value for charact 1FORMULA

Similar Messages

Maybe you are looking for