Query display errors

Apologies for posting this again but I've made a little progressand wanted to be clear in what I was asking... I have two seemingly identical .bqy files, FileA and FileB.FileA was inherited from a colleague while FileB has been createdby myself. Both contain identical master datamodels, displaying 5 connectedtabels from a single database. Both use the same OCE file (not copies of the same one; the actualsame one). This OCE file fetches Metadata on the same connection onwhich the application data is retrieved. All data is held in a SQL Server 2000 database, configured in theOCE as ODBC/MS SQL Server. The metadata type field is a direct liftfrom syscolumns.xtype. Each contains a query that selects and displays all columns androws from a single table. In both cases the query is linked to themaster data model. The results of both queries appear to retrieve the same number ofrows (i.e. text at the bottom of the results say 48129 of 48129rows in both cases). FileA - the inherited bqy - retrieves and displays the resultscorrectly. FileB - the one I created - does not. varchar and bigint fields aredisplaying as blank (all other fields appear to display correctly:int, text, float, datetime etc). However, if I apply any relevantfunction to the varchar or bigint fields then they will display(for example, if I retrieve a varchar Addr1 field it displays asblank; if I apply lower() to the field it displays, albeit in lowercase). Also, in FileA if I right-click on the topic/table in the masterdatamodel and choose Detail View, 10 sample rows of data aredisplayed as expected. If I do the same in FileB, I get a dataformat error and the display does not change. Lastly, if I create a new query in FileA but don't link it to themaster data model, then make it identical to the query that works -it exhibits the same behaviour as that shown in FileB. One thing that I have noticed is in the dbgprint from therespective queries: it is identical except for a single line. WhenI run the query that works, all that is displayed (of interest) isthe SQL being sent to the server (essentially a single selectstatement with no joins). When I run the query that doesn't work,the exact same select statement is there with the addition of thefollowing line: ODBC Information: SQLFetch: rc = 1, SQLSTATE: 01004, Error Msg:[Microsoft][ODBC SQL Server Driver]String data, righttruncation In all other respects the dbgprint is identical. And, as statedabove, the queries all use the exact same OCE file. I'm stumped. Can anyone help?

Folks, somone on a different site answered this for me and I wanted topass on the solution in case anyone googles this in the future. I was using syscolumns.xtype for my metadata column type - thiswas incorrect. I should have been using syscolumns.type. I madethat one change and all the problems I've described so fardisappeared. Keith.

Similar Messages

Character in chart of bw query display error in web browser

our system is unicode system,default language is chiniese(ZH)
our IGS patch level is 11
system basis release is 700 patch 13,and BW patch level is 15
everything is ok
but when we execute the query in WEB browser,the chart display error like the image below:
[http://www.xhschool.com:82/yuuki/viva/zh.jpg|http://www.xhschool.com:82/yuuki/viva/zh.jpg]
the text of kpi in the chart display error as the squares.
how can i make it correct?

Hi,
you have to download and install igshelper.sar as described in note 1028690.
Regards, Kai

How to display error documents in selection screen level

Hi,
Currently Iam doing Smartforms for journal voucher. Iam taking multiple documents as input and displaying relavent item data for each.
Now, my requirement is i want to display invalid document numbers at selection screen level. For example there are 30 invalid document number i want to display them before start-of-selection.
Thanks in advance,
Regards,
Chinna..

i have a query......say i am using a selet-options s_ebeln for ekko-ebeln.
i want to display error messages for
1>lower limit cant be greater than upper limit?
2>for special cahracters given in the select-options fields.....etc...
now when i am writing the code......
if s_ebeln-low gt s_ebeln-high.
message e001.
it is showing SAP's message not mine.
but ....if my s_ebeln-high field is 0.
then my message is showing.
pls give me the codes for these?

View Display Error in OBIEE with Essbase Cubes

Hi All,
Currently we are generating the Reports from Essbase Cubes.
We have an hierarchy in OBIEE and when we are trying to drill down one hierarchy(Tech Executive) we are getting below Error.
" Error
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 96002] Essbase Error: Unknown Member [H1_Rel_TecExec_Ini_appl].[Unknown] used in query (HY000)
SQL Issued: SELECT s_0, s_1, s_2, s_3, s_4, s_5 FROM ( SELECT 0 s_0, "Defect7M"."H1_Rel_TecExec_Ini_appl"."H1 Initiative Name" s_1, "Defect7M"."H1_Rel_TecExec_Ini_appl"."H1 Tech Executive" s_2, SORTKEY("Defect7M"."H1_Rel_TecExec_Ini_appl"."H1 Initiative Name") s_3, SORTKEY("Defect7M"."H1_Rel_TecExec_Ini_appl"."H1 Tech Executive") s_4, "Defect7M"."Defect7M#1"."Defect7M - measure" s_5 FROM "Defect7M" WHERE ("Defect7M"."H1_Rel_TecExec_Ini_appl"."H1 Tech Executive" = 'Unknown') ) djm "
Can someone assist me how to resolve this error
Thanks,
SatyaB

Satya,
Have you done anything to modify the essbase drill logic within your BMM?
Remember when modeling essbase you should just try to use the defaults first to ensure that all works correctly the first time through. Then you can adjust any hiearchies, federate, etc.

How to validate VO result and display error message?

Hi,
I have created 2 pages:
Page 1: User to enter employee number and click 'Go' button to search (redirect to Page 2)
Page 2: To display employee details
In situation where employee is suspended, employee detail will be display as blank in Page 2.
At the same time, we would like to display error message which inform user to refer to HR Department for this scenario.
Need guidance on how to perform the validation and display error message.
Thanks and Regards,
Shiau Chin

Hi Shiau,
In this case instead of redirecting to next page, throw an exception on the same page.
If you want redirect it to next page then while redirecting it to next page pass some info that can indicate that employee is suspended, get this value in Process request if it has value then throw exception else query details.
Regards,
Reetesh Sharma

Dashboard Display Error

Hi Gurus,
I getting error while accessing sub dashboard.I have Dashboard Name as Sales and i have sub dashboard underneath Sales says S1,S2,S3 and each sub dashboards has dashboard pages respectively.So when i select S1 sub dashboard it throws me error as
Dashboard Display Error
Assertion failure: pRoot at line 107 of /vol1/users/anabuild/views/nightly/Tue/aruba/RH_Linux/vobs/071217.1900/analytics_web/main/project/webxml/xmldocument.cpp
Error Details
Error Codes: OQ78YWIW
and when i select S2,S3 it shows me dashboard pages fine doesn't give me any error.I restarted all my services but no luck.This error throws only if i enter with user id and password but it doesn't throw error if enter as Administrator.
Can you guys let me know what is error meant by and if any one have faced such scenario.
I really appreciate your help.

Does the user have the same read/write rights on the server as the administrator?
Is there a query limitation based on the user credentials?
regards
John
http://obiee101.blogspot.com/

Unknown Query Engine Error when doing a Verify Database

Hi there,
Using Crystal 10. Sybase Server.
Have built a report that connects to a stored procedure. The stored procedure has since been updated, and new fields have been added.
Usual process for me is to simply:
1. Go to Database > Verify Database
2. Enter login credentials for server
3. Enter parameter values (as per stored proc)
4. Report is then updated and new fields display
Currently, I am able to complete step 3. As soon as I hit ok, i get an 'Unknown Query Engine Error' - to which I can only hit OK. Doing so results in no changes - and the new fields of course do not display.
Any clues on what might be going wrong? I am guessing that it is something to do with the stored proc itself - but perhaps it is some sort of permissions issue?
Grateful for any assistance you can provide. Please let me know if you need any more info from me.
Many thanks,
Corinne

Likely due to some field type defined incorrectly or not supported. Try creating a new report off the new update connection info. If that fails also then it's the data source causing the problem.

SI_LOCALE - dashboard problem - query result error

Dear Sirs,
I have:
1. Business Objects Business Intelligence platform 4.0 with SP2 and FP 11.
2. Dashboard Design 2011
On BI launch pad I have problem with dashboard design object. When user tries to run the dashboard, it shows a error message.
Query result error:
The property with ID SI_LOCALE does not exist in the object.
On the same workstation, If I try to do the same, but using a different user, dashboard displays properly.
Let me add that the dashboard has 2 queries (from universe).
I tried to change the regional settings, but without results.
What does it mean?
Any idea how to resolve this problem?
Best regards,
Michal

I met the same issue, till now it remains.
I referred to SAP note
"1747311
Receive Error: "The property with ID SI_LOCALE does not exist in the object" when viewing "
However we already applied SP5. It seems still other factor entails this.

Getting a Page Cannot be Displayed error while uploading a Contract Document in SAP E-sourcing for size 500mb

Hi Guys,
I am getting a Page can not be displayed error while uploading a COntract Document in SAP-E-soucing 7.0.
Maximum Size set in Our SYSTEM is :9765MB.
Approx size of the Document tried is more then 300MB.
Appreciate your help on this.
Regards
Tarun

Hi Tarun,
Please check the below system properties using system user login
attachments.maxSizeKB.buyers - "Maximum size in KB of a employer-attached attachment file"
attachments.upload.enable.buyers- " Enable/Disable uploading of attachments by internal users"
Also Please check with other attachment, contracts related properties in the System.
Let me know if this helps.
Thanks,
Raj.

Display error message in batch job log

Hello
I have a batch job running and I have an error coming during some validation logic.
The problem is I need to continue the batch job when this error message comes and it should not cancel the batch job as it is doing currently but display that error message in batch job log, there are more similar error messages coming in job log and job gets finished, but when my error message comes job gets cancelled.
I cannot give it as info message as it will give wrong idea about message type.
Is there any FM by which we can add message in job log?

Sanjeev I have done that but problem is I do not want to give that as Information message but Error message only and continue processing.
If you see in screenshot 3rd message is given by me as information and you can see error messages also 6th and 7th and job continued till it is finished
Basically I want that 'I' to be displayed as 'E'.
Display error message in batch job log

Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."

Hi,
Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."
DC:windows Server 2008 R2
Domain functional level:Windows Server 2003
When Winxp join domain, have no this error message.
I checked http://support.microsoft.com/kb/2018583?wa=wsignin1.0 does't work.
There have 3 suggestion in this article:
1.The "Disable NetBIOS over TCP/IP" checkbox has been disabled in the IPv4 properties of the computer being joined.
Doesnt's work.
2.Connectivity over UDP port 137 is blocked between client and the helper DC servicing the join operation in the target domain.
On my DC, I run netstat -an, reslut as below:
UDP 192.168.20.3:137 *:*
3.The TCP/IPv4 protocol has been disabled so that the client being joined or the DC in the destination domain targeted by the LDAP BIND is running TCP/IPv6 only.
We are not using IPV6.
This server recently updated from Windows Server 2003 to Windows Server 2008 R2. Before upgrade, when Win7 and Win2008 join this domain, also have the same error message.
Please help to check this issue.
Thank you very much.
BR
Guo YingHui

Hi Guo Ying,
I have faced this critical error which makes over-writes the host names in the domain when you join.
For example: Already you had a host name called as PC.domain.com in the domain.com Domain.
When you try to add the another host name called as PC in the domain.com Domain, it doesn't give you the duplicate name error on the network it does over-write the existing host name called as PC.domain.com & it will add the new host name into the domain.
Host name which got over-written will get removed from the domain. I faced this issue in my project. My DPM host name got removed from the Domain & new host name got joined into the domain which halted my backups for one day.
Final Resolution is as follows:
You need to start the dns console on the DC & drop down the domain name.
Select the _msdcs when you click on _msdcs it will show the Name Server's list on the right hand side.
You need to add the Domain Naming Master under the _msdcs or add all the domain controllers which you had.
After you add the Name server's try joining the PC OR Laptop to the domain which is successfully joins it.
Regards
Anand S
Thanks & Regards Anand Sunka MCSA+CCNA+MCTS

See my query and error, see my query and error

hi master
sir i use inner query but not run
please see my query with error
query :==========
select accid as acccode,fstatus, case when fstatus=1 then
(select sum(drbal) from accbal where substr(accbal.accid,1,length(acccode))=acccode)
end what
from chartofacc
error :========
SQL> /
(select sum(drbal) from accbal where substr(accbal.accid,1,length(acccode))=acccode)
ERROR at line 2:
ORA-00904: "ACCCODE": invalid identifier
please sir give me any idea *

Does this column ACCCODE exist in your table accbal?
The columns in the outer query will not be visible in the inner query but the vise versa is true.

"XML page cannot be displayed" error

Using XML output on a table with more than a few rows falls over with a "XML page cannot be displayed" error. Sometimes only the error is displayed, sometimes some rows are displayed with this error at the end of the page (eg the DEMO_STATES table)
Can anyone advise if there is some sort of limiter at work here?
Thanks,
Barry

i'm pretty sure that error comes up when your browser (ie, specifically, i believe) can't render the xml data it's received. i'm also pretty sure, as the full message implies, it's because it doesn't know what style sheet to use when you go to that page. in short, it's a browser config issue. one way to bypass it (to at least prove that it's a browser issue) would be to create a link to your page, right click the link, and do a "Save Target As...". the resulting file will be your valid XML one. fwiw, i've had better luck controlling the manner in which my xml data is received when i use mozilla or netscape (but i'd imagine there's just some setting you'd toggle in IE to avoid your issue).
hope this helps,
raj

Editable alv: add custom validation and display "errors" in protocol list

Hi,
What I want to do:
PAI validation of editable alv with displaying error's in the protocol list by adding custom entries to the existing protocol object.
What is my problem:
After registering "data_changed event", the protocol list don't appear.
My understanding is, that the object "er_data_changed" is passed by the event "data_changed"
an so I thought I can add some more entries to the protocol list.
After "de-registering" the "data_changed" event, the protocol appears with the standard errros messages (e.g. "input to numeric" by enter charachters)
One more hint:
By creating a new object "er_data_changed" in the handler method the protocol list works, but I would like to append entries to the object that was passed with the event.
Probably I've misunderstand something, please help !
My coding:
PAI:
trigger event "data_changed" -> calls handler method
CALL METHOD r_myalv->check_changed_data
 IMPORTING
 e_valid = is_valid.
stop processing
IF is_valid NE 'X'.
 MESSAGE 'invalid input' TYPE 'E' .
ENDIF.
handler method:
handle_data_changed FOR EVENT data_changed OF cl_gui_alv_grid IMPORTING e_ucomm
 er_data_changed.
METHOD handle_data_changed.
 data: ls_mod_cell type lvc_s_modi.
 CALL METHOD er_data_changed->add_protocol_entry
 EXPORTING
 i_msgid = 'SU'
 i_msgty = 'E'
 i_msgno = '000'
 i_msgv1 = 'This is a test !'
 i_fieldname = ls_mod_cell-fieldname.
 er_data_changed->refresh_protocol( ).
 er_data_changed->DISPLAY_PROTOCOL( ).
ENDMETHOD. "handle_data_changed

Dear Olaf,
 If understood correctly, you want to Edit an ALV and do some data validations when some data is changed in an ALV. To do this follow the following steps:
1. Before displaying ALV, Register the edit event.
* Set cell modified to trigger data_changed
CALL METHOD go_alv_grid->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_modified.
2. Register the event DATA_CHANGED of class CL_GUI_ALV_GRID & handle the event.
SET HANDLER lo_event_receiver->handle_data_changed FOR go_alv_grid.
The event DATA_CHANGED of class CL_GUI_ALV_GRID has a parameter ER_DATA_CHANGED which is of type CL_ALV_CHANGED_DATA_PROTOCOL.
This er_data_changed has internal table MT_MOD_CELLS(contains index of records changed ) & MP_MOD_ROWS(contains the changed row), using these update your internal table accordingly.
DATA : wa_mod_cell TYPE lvc_s_modi.
FIELD-SYMBOLS: <fs> TYPE table.
LOOP AT er_data_changed->mt_mod_cells INTO wa_mod_cell.
ASSIGN er_data_changed->mp_mod_rows->* TO <fs>.
READ TABLE <fs> INTO wa_output INDEX wa_mod_cell-tabix.
MODIFY lt_output FROM wa_output INDEX wa_mod_cell-row_id.
ENDLOOP.
3. Here it self you can do the required data validations(No need of any PAI modules) as below.
IF wa_orders-zfstfirmtyp = c_9.
MESSAGE s288(zcsp).
DELETE er_data_changed->mt_mod_cells.
EXIT.
ENDIF.
Regards
Kesava

How to display error message ??

Hi,
I have a BDC program to upload data from an excel sheet. I could see that some records of data fail to pass and hence after my bdc run i would like to display error message for the failed records as follows:
costcenter:
cost element:
fiscal year:
etc etc
is it possible ?? how to do that ? please explain in detail.
for ur reference my program is pasted below.
thanks
*& Report ZBDC_BUDGET_UPLOAD
REPORT ZBDC_BUDGET_UPLOAD.
types: begin of tdata,
 rec(150) type c,
 end of tdata,
 begin of tmtgp,
 costcent LIKE CCSS-KOSTL,
 costelem LIKE CCSS-KSTAR,
 fisyear LIKE CCSS-GJAHR,
 jan(10),
 feb(10),
 mar(10),
 apr(10),
 may(10),
 jun(10),
 jul(10),
 aug(10),
 sep(10),
 oct(10),
 nov(10),
 dec(10),
 end of tmtgp.
data: idata type table of tdata with header line.
data: imtgp type table of tmtgp with header line.
Data : fieldval(10) type c.
selection-screen begin of block b1 with frame title text-001.
parameters: p_file type localfile default 'C:\budget_data_csv.csv'.
selection-screen end of block b1.
include zbdcrecx1.
at selection-screen on value-request for p_file.
call function 'KD_GET_FILENAME_ON_F4'
 exporting static = 'X'
 changing file_name = p_file.
start-of-selection.
perform upload_data.
loop at imtgp.
Write imtgp-fisyear to fieldval.
perform open_group.
perform bdc_dynpro using 'SAPLKPP0' '1000'.
perform bdc_field using 'BDC_CURSOR'
 'KPP0B-VALUE(04)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'KPP0B-VALUE(04)'
 fieldval.
Write imtgp-costcent to fieldval.
perform bdc_dynpro using 'SAPLKPP0' '1000'.
perform bdc_field using 'BDC_CURSOR'
 'KPP0B-VALUE(06)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'KPP0B-VALUE(06)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP0' '1000'.
perform bdc_field using 'BDC_CURSOR'
 'KPP0B-VALUE(09)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-costelem to fieldval.
perform bdc_field using 'KPP0B-VALUE(09)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP0' '1000'.
perform bdc_field using 'BDC_CURSOR'
 'KPP0B-VALUE(04)'.
perform bdc_field using 'BDC_OKCODE'
 '=CSPB'.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(01)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-jan to fieldval.
perform bdc_field using 'Z-BDC03(01)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(02)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-feb to fieldval.
perform bdc_field using 'Z-BDC03(02)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(03)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-mar to fieldval.
perform bdc_field using 'Z-BDC03(03)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(04)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-apr to fieldval.
perform bdc_field using 'Z-BDC03(04)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(05)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-may to fieldval.
perform bdc_field using 'Z-BDC03(05)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(06)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-jun to fieldval.
perform bdc_field using 'Z-BDC03(06)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(07)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-jul to fieldval.
perform bdc_field using 'Z-BDC03(07)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(08)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-aug to fieldval.
perform bdc_field using 'Z-BDC03(08)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(09)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-sep to fieldval.
perform bdc_field using 'Z-BDC03(09)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(10)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-oct to fieldval.
perform bdc_field using 'Z-BDC03(10)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(11)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-nov to fieldval.
perform bdc_field using 'Z-BDC03(11)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(12)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-dec to fieldval.
perform bdc_field using 'Z-BDC03(12)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(12)'.
perform bdc_field using 'BDC_OKCODE'
 '=CBUC'.
perform bdc_transaction using 'KP06'.
perform close_group.
endloop.
form upload_data.
data: filename type string.
clear idata.
refresh idata.
filename = p_file.
call function 'GUI_UPLOAD'
 exporting filename = filename
 filetype = 'ASC'
 tables data_tab = idata
 exceptions file_open_error = 1
 file_read_error = 2
 no_authority = 6
 others = 17.
 check sy-subrc = 0.
 loop at idata.
 clear imtgp.
 split idata at ',' into imtgp-costcent imtgp-costelem imtgp-fisyear
imtgp-jan imtgp-feb imtgp-mar imtgp-apr imtgp-may imtgp-jun imtgp-jul
imtgp-aug imtgp-sep imtgp-oct imtgp-nov imtgp-dec.
 append imtgp.
 endloop.
endform.

check the below code,.,
DATA : t_bdcmsgcoll TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE.
CALL TRANSACTION '<DELIVERYTRANSACTION>' USING t_bdctab
 mode 'N'
 MESSAGES INTO t_bdcmsgcoll.
DESCRIBE TABLE t_bdcmsgcoll LINES g_lines.
READ TABLE t_bdcmsgcoll INDEX g_lines.
IF t_bdcmsgcoll-msgtyp = 'S' AND
 t_bdcmsgcoll-msgid = <Msg id> AND
 t_bdcmsgcoll-msgnr = <Msg number>.
* Trap your Call Transaction messages
 t_success-deliverynumber = t_bdcmsgcoll-msgv1.
* You can format the message returned by call transaction using function 'FORMAT_MESSAGE' which will return g_mesg
 t_success-message = g_mesg.
 APPEND t_success.
 CLEAR t_success.
ELSE.
* If there an Error-Do this..
 READ TABLE t_bdcmsgcoll WITH KEY msgtyp = 'E'.
 IF sy-subrc = 0.
* Format your message using FORMAT_MESSAGE "FM
 CLEAR g_mesg.
 t_error-msg = g_mesg_incl.
 APPEND t_error.
 CLEAR t_error.
 ENDIF.
ENDIF.
* Clear for next run
CLEAR: t_bdcmsgcoll,
 t_bdctab.
REFRESH: t_bdcmsgcoll[],
 t_bdctab[].

Query display errors

Similar Messages

Maybe you are looking for