Query error OLAP BO Universe

Hello,
We are at BOXI 3.1 SP2. We have some BO universes on top of OLAP MSAS 2008 cubes.
Recently for some of our queries, we have started getting these intermittent errors - same error message all the time
"A database error occured. error text is "Failed to execute MDX query" Reason: the component Microsoft OLE DB provider for Analysis Services 2008 returned Server error( Server : the operation has been cancelled )
(WIS 10901)"
The Cube folks have run some tracing on their side - but could not isolate any explicit clues as to what causes the query to error on BO side.
Has anyone seen something like this before? Your help would be much appreciated.

Try enabling the trace as per the note below to get more info on the BOE side.
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3132363030303426

Similar Messages

Sub Query or Use Result of Query on OLAP BW Universe ?

Dear All,
Could you use in Webi report :
1 ) Sub Query ? I activate the option with Designer but button is still in grey...
2 ) Result of query on filter panel ? The button is still in grey
Regards
Cédric

Hi ,
I do it before my initial post... without success.
I already use Sub Query in relational database, but with OLAP BW universe, I can't use actually...
I am searching info, solution,...
Thanks
Cédric

Error while executing query in OLAP server

Dear all,
we are using APD to extracted sales data for the last 3 months .this APD was executed perfectly till yesterday.
in today's run APD got failed with error message as below
"@5C\QError@ Fiscal year variant Z3 is not maintained for calendar year 9999
"@5C\QError@ Error while executing query in OLAP server; redesign query.
Please suggest corrective action .
I have tried executing manually with less selections on creation date by no success..
regards,
puru

Purushotham wrote:
Hi Jeeth,
>
> in query we have selection for " currency type " and created on " .we are not using fiscal year variant.
>
> in first strep of APD design only we have a problem and also recently there are no changes to this APD .
>
> It was executed perfectly on till 4th .
>
> Edited by: Purushotham on Feb 6, 2012 12:48 PM
Dear Purushotham, You can maintain the Fiscal year Variant in OB29. 2 possibilities, #1 : Data for the FYV/Year could be wrong. #2 : Updates for Fiscal Year might not have been done. You can maintaine FY varients up to FY 2XXX in your BW system. This should fix the error. The table T009 must be the same as we get when we do OB29 TCode in BW, so via SPRO do rebuild of table again.
Edited by: Arun Bala G on Feb 6, 2012 4:05 PM

Webi error on Unx Universes only('getSessionInfosEX')API

Webi error on Unx Universes only('getSessionInfosEX')API We are on BO4.1 SP2, Oracle11g I am getting error when I try to create webi report on unx universes only. I can create report on Unv universes without any error. Here is the error I am getting ('An internal error occured while calling 'getSessionInfoEX') API. I have created unx on Oracle 11g and I can run the query in IDT and can see data without any error. Not sure what could be the issue, any ideas? Thanks in advance.

Hi,
Based on your various threads, it seems like you are having numerous issues after you update, which suggests to me that something has gone wrong during the patching.
Route 1 in such a situation would be to contact AGS support services. Have you done that?
regards.
H

Package-query: error while loading shared libraries: libcurl.so.4: can

Hi all
when i run yaourt to install any things :
package-query: error while loading shared libraries: libcurl.so.4: cannot open shared object file: No such file or directory
why?
what can i do?
I'm very newbie so help me with easy commands!
thanks

try to reinstall yahourt :
https://wiki.archlinux.org/index.php/Yaourt

SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)

SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM         ODPO AS T0 LEFT OUTER JOIN
                      VPM2 AS T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry LEFT OUTER JOIN
     OVPM AS T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
                      VPM1 AS T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate>='[%0]' and T0.DocDate<='[%1]'

Hi,
Try this:
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM         ODPO T0 LEFT OUTER JOIN
                      VPM2 T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry
LEFT OUTER JOIN
     OVPM T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
                      VPM1 T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate >= '[%0]' and T0.DocDate <='[%1]'
group by T0.DocStatus,T0.DocDate ,
T0.DocNum ,
T0.NumAtCard,
T0.TransId ,
T0.Comments ,
T0.CardCode,
T0.CardName ,
T0.WTSum ,
T3.DueDate ,
T3.CheckSum
Thanks & Regards,
Nagarajan

Invalid LOV query error

I am trying to modify a query for LOV page item but get an Invalid LOV query error when trying to Apply Changes to my page(query however works in SQL*Plus)
I am trying to change the date format of query result to MON YYYY.
Original query that works:
select distinct bill.BILLED_DATE display_value, bill.BILL_ID return_value
from BILL;
New Query that fails in APEX (but works in SQL*Plus)
select distinct to_char(bill.BILLED_DATE, 'MON YYYY') display_value,
bill.BILL_ID return_value from BILL;
Anyone have any idea what I need to do to make this work?
"1 error has occurred
LOV query is invalid, a display and a return value are needed, the column names need to be different. If your query contains an in-line query, the first FROM clause in the SQL statement must not belong to the in-line query"

Strange, this lov does work and is no different than yours:
select distinct to_char(sysdate,'MON YYYY') disp, 1 retval from dual
What are the results from the query? Can there be something wrong with that?
Regards Guido

Query erroring out with lack of temp space?

I have 2 databases. One was cloned from the other on to another server.
On one server the query takes 5 seconds to run on the other server the query errors lack with lack of disk space.
The init files are the same. The Oracle memory is the same. The temp tablespace size is the same.
I'm stuck!
What should I look for to find out what is causing the error?

On both databases the version is 9.2.0.6.
This is the view that worked in database1 and errored in database2...
CREATE OR REPLACE VIEW SAP_STAGE.MTC_STG_MEASURE_POINT_V
EQUIP_NO,
MEASUR_PNTPOS,
CHARACT_NAME,
UNIT,
MEASUR_PNT_DESC,
VALUATION_CODE,
TEXT_FIELD
AS
SELECT DISTINCT xref.equnr AS equip_no, rpmp.*
FROM sap_stage.measuring_point mp JOIN xref_sap_equi xref
ON TRIM (mp.equip_no) = TRIM (xref.groes)
JOIN stg_mtc_msf600 msf600
ON TRIM (mp.equip_no) = TRIM (msf600.equip_no)
AND TRIM (msf600.dstrct_code) in ('347','315')
JOIN rec_prodstat_code_measur_pts rpmp ON 1 = 1
If I qualify all the tables with SAP_STAGE the query runs in 5 seconds in database2.
Why does the query run in database 1 without the schema names?

Query Error (CL_RSDD_VCUBE .and SAPLRRK0)

Query Error (CL_RSDD_VCUBE .and SAPLRRK0)
Posted: Apr 19, 2007 6:01 PM Reply E-mail this post
Hi,
I'm trying yo run a query.
I check the query in the Query Designer and is OK, but when run the query a message appears "Internal error in program CL_RSDD_VCUBE and method GET_SID-8-" and "System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-".
This query is made on Remote cube Accessing data from ORACLE through UD Connect , and I don't known if this error is related number of records.We r using BW3.5
We have OPCO CODE as a infoobject in the query if we restrict that opcocode with some values and execue the query its getting the values and running without errors .But if we wont restrict with anyvalues on the opo code its getting above errors.
Can anyone help me?
Thanks in Advance
Message was edited by:
Mural

Hi Mural,
you can go in Tcode RSRT, introduce your query and then select from Environment first "Repair Read Mode" and then "Generate Queries". Then try click to Execute to see if it was only a generation problem or if the query has a real problem.
In this case you can try with "Execute + Debug" to see where the problem is.
Ciao.
Riccardo.

Generate causes SCC Query Error: Unhandled exception

Hi folks,
I have Robohelp X5, I am composing on my local machine with
saves going to an RCS server. I've pretty much figured out that RCS
has a problem with the skins in Robohelp, because if I go to create
a custom skin, I can create it in a non-controlled project. The
second I go to create a custom skin in the controlled version, I
get an infinite loop of the SCCQueryError message, Unhandled
Exception Message Boxes. I have to kill Robohelp, and reboot to get
out of the error message.
Whenever I go to generate the verson controlled project, I
get at least six of these error messages, but the project is
generated and I can open it and can't seem to find anything
missing. So, even though I get the errors in a generate, they don't
affect the ability to generate a project.
I've already checked to be sure that the RCS server is
accepting all the file extensions.. that was my first thought was
that it didn't like the .swf extensions.
Anyone else have or see this problem?
Thanks!

Thank you Eilsa... It's a touch complicated, but I am working
off my hard drive, and Robohelp is installed on my hard drive. The
webhelp file that is integrated with the project is being pushed to
the a folder on the development server where RCS resides, and my
project files are being archived in another directory on the RCS
version tracker.
I get the SCC query error (which seems to be an RCS version
tracker error) right after I generate either a local or server
webhelp, about six in all. So I'm thinking that there is some file
extension that RCS is blocking, because I don't get the errors when
I do the same thing with a non-version tracked project.
Forget about trying to create any skins.. (and this is on my
local, too) I have to switch to a non-version tracked project to
create the skins.
But just trying to see if anyone else has seen the
problem..

BEX query error---Error reading the data of InfoProvider

Hello all,
we are getting the following msg when we execute the query-
Error reading the data of InfoProvider ZEUDPR01
Errors occurred when extracting data from DataSource 9AEU_DOM
Short Text: Error for COM routine using application program (return c
Parameter: 1028533- LC kernel
Message in Source System: E102(/SAPAPO/OM) ...
Short Text: COM - error Unknown
Parameter: Unknown
Message in Source System: E001(/SAPAPO/OM) ...
Messages for DataSource 9AEU_DOM from source system PA1CLNT100
Errors occurred during parallel processing of query 4, RC: 3
Error while reading data; navigation is possible
Row: 54 Inc: WRITE_MESSAGES Prog: CL_RSDR_AT_QUERY
Found
This is the error observed for a particular selection only..for rest of the selection we get the data correctly.
Please help with the possible causes of error.
Thanks,
Pallavi

Hi Pallavi,
How did you manage the pb?
we have the same error after Stack 21 (SP23)
we could not run query.
Thanks.
John

특정 SUPPLIER SITE LEVEL의 DATA수정 시도시 RE-QUERY ERROR

제품 : FIN_AP
작성날짜 : 2004-05-19
특정 SUPPLIER SITE LEVEL의 DATA수정 시도시 RE-QUERY ERROR
=================================================
Problem Description
특정 Supplier Site level의 Data수정 시도시 아래의 Message발생
==============================================
record has been updated, re-query block to see change
==============================================
Solution Description
아래의 SQL을 실행해서 "CHK_TRAIL_SPACE"라는 Procedure를
만든 후 생성된 Procedure를 다음의 방법으로 실행하면, Input Table의
어떤 Column에 NULL문자가 들어갔는지 확인할 수 있다.
set serveroutput on
execute chk_trail_space(<table_name to check>);
i.e. (execute chk_trail_space('PO_VENDORS');)
trailspace.sql:
===============================================================================
CREATE OR REPLACE PROCEDURE CHK_TRAIL_SPACE (p_table_name in varchar)
IS
v_table_name varchar(30);
v_column_name varchar(30);
v_column_name_c char(30);
v_space_count number;
v_ret number; -- temp holder for above
v_initial_space_counter number;
dyn_cursor number;
CURSOR TABLE1 IS
SELECT table_name
FROM DBA_TABLES
WHERE table_name = p_table_name;
CURSOR COLUMN1 IS
SELECT column_name
FROM DBA_TAB_COLUMNS
WHERE table_name = v_table_name;
BEGIN
OPEN TABLE1;
LOOP
-- FOR crec1 in TABLE1 LOOP
fetch TABLE1 into v_table_name;
IF (TABLE1%NOTFOUND) THEN
exit;
END IF;
dbms_output.put_line(v_table_name);
dbms_output.put_line
v_initial_space_counter := 0;
OPEN COLUMN1;
LOOP
-- FOR crec2 in COLUMN1 LOOP
fetch COLUMN1 into v_column_name;
IF (COLUMN1%NOTFOUND) THEN
exit;
END IF;
dyn_cursor := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE
(dyn_cursor,
'SELECT COUNT(*) ' ||
'FROM ' || p_table_name ||
' WHERE ' || v_column_name || ' LIKE ''% ''',
DBMS_SQL.NATIVE);
DBMS_SQL.define_column (dyn_cursor, 1, v_space_count);
v_ret := DBMS_SQL.EXECUTE(dyn_cursor);
if DBMS_SQL.fetch_rows(dyn_cursor) > 0 then
DBMS_SQL.column_value (dyn_cursor, 1, v_space_count);
end if;
DBMS_SQL.CLOSE_CURSOR(dyn_cursor);
IF v_space_count > 0 THEN
v_initial_space_counter := v_initial_space_counter + 1;
END IF;
v_column_name_c := v_column_name;
IF v_space_count > 0 THEN
dbms_output.put_line(' ' || v_column_name_c || to_char(v_space_count))&
#059;
END IF;
end loop;
close column1;
end loop;
close table1;
END CHK_TRAIL_SPACE;
====================================================================
NULL문자가 들어간 Column이 확인되면,
update po_vendors
set vendor_name = rtrim(vendor_name);
위의 방법으로 수정하면 된다.
Reference Documents
Note :234048.1

If I delete the purchase details/line item, the supplier site can be changed.
The error appeared again after the new line item selected,click on "Shipment" button, and change the supplier site.
It's not able to change it. Any reason caused by the line item shipment? how it relate?

ADM Error processing results from query: Error: Index 0 out of range

11.1.2.1
When running quite a large book, we are getting the following error:
ADM Error processing results from query: Error: Index 0 out of range
The individual reports in the books are running fine.
PS. The report books that are giving this error run fine on 9.3.1
Could this be a time-out issue and how do we resolve it?

what is background datasource Essbase or HFM
do you have lot of data in pov please try below
>Do you have pov prompt
>increase jvm heap size for report server in reporting server
>Fr log files has some more detail

Query error - with filtering records

Hi. I have a gallery that shows 9 records at a time, which
you can then move on to subsequent pages. I added filters to narrow
down the record search, however, I am receiving query errors. This
is my code:

<cfparam name="form.ART_CATEGORY_ID" default="">
<cfparam name="form.ART_TYPE_ID" default="">
<cfparam name="form.FINE_ART_CLASS_ID" default="">
<cfparam name="form.searchfield" default="">

<cfquery name="categories" datasource="nancy">
SELECT *
FROM CATEGORIES
ORDER BY ART_CATEGORY_ID
</cfquery>

<cfquery name="types" datasource="nancy">
SELECT *
FROM TYPE
ORDER BY ART_TYPE_ID
</cfquery>

<cfquery name="class" datasource="nancy">
SELECT *
FROM CLASS
ORDER BY FINE_ART_CLASS_ID
</cfquery>

<form method="post" action="root_fineart.cfm">
<select name="ART_TYPE_ID">
<option value="" <cfif trim(form.ART_TYPE_ID) eq
"">selected
</cfif>> All </option>
<cfoutput query="types">
<option value="#ART_TYPE_ID#"
<cfif form.ART_TYPE_ID eq
types.ART_TYPE_ID>selected</cfif>>#ART_TYPE#</option>
</cfoutput>
</select>
<select name="ART_CATEGORY_ID">
<option value="" <cfif trim(form.ART_CATEGORY_ID) eq
"">selected
</cfif>> All </option>
<cfoutput query="categories">
<option value="#ART_CATEGORY_ID#"
<cfif form.ART_CATEGORY_ID eq
categories.ART_CATEGORY_ID>selected</cfif>>#ART_CATEGORY#</option>
</cfoutput>
</select>
<select name="FINE_ART_CLASS_ID">
<option value="" <cfif trim(form.FINE_ART_CLASS_ID) eq
"">selected
</cfif>> All </option>
<cfoutput query="class">
<option value="#FINE_ART_CLASS_ID#"
<cfif form.FINE_ART_CLASS_ID eq
class.FINE_ART_CLASS_ID>selected</cfif>>#FINE_ART_CLASS#</option>
</cfoutput>
</select>

<input name="searchfield" type="text" size="10"
value="#form.searchfield#" /></cfoutput> </label>
<input name="submit" type="submit" value="Submit" />

<cfparam name="start" type="numeric" default="1">
<cfparam name="step" type="numeric" default="9">

<cfquery datasource="nancy" cachedwithin=".01"
name="queryResults">
SELECT *
FROM ART
WHERE 1 = 1
<cfif val(form.ART_CATEGORY_ID) GT 0>
AND ART_CATEGORY_ID = <cfqueryparam
value="#form.ART_CATEGORY_ID#" cfsqltype="cf_sql_integer">
</cfif>
<cfif val(form.ART_TYPE_ID) GT 0>
AND r.ART_TYPE_ID = <cfqueryparam
value="#form.ART_TYPE_ID#" cfsqltype="cf_sql_integer">
</cfif>
<cfif val(form.FINE_ART_CLASS_ID) GT 0>
AND i.FINE_ART_CLASS_ID = <cfqueryparam
value="#form.FINE_ART_CLASS_ID#" cfsqltype="cf_sql_integer">
</cfif>
<cfif trim(form.searchfield) neq "">
AND ART_TITLE LIKE '%#form.searchfield#%'
</cfif>
ORDER BY ART_TITLE ASC
</cfquery>

<cfif queryResults.recordcount gt 0>
<cfoutput>
<p class="style1">

<cfif (start-step-step) gt 1>
<a href="#cgi.SCRIPT_NAME#?start=1"><img
src="images/Beginning_blue.png" alt="Beginning" width="31"
height="21" align="absbottom" /></a>
</cfif>
<cfif start gt 1>
<a href="#cgi.SCRIPT_NAME#?start=#start-step#"><img
src="images/previous_blue.png" alt="Previous" align="absbottom"
/></a>
</cfif>
<strong>#start# - #iif(start * 3 + step gt
queryResults.recordcount,queryResults.recordcount,start + step-1)#
of #queryResults.recordcount# records</strong>

<cfif (start + step) lte queryResults.recordcount>
<a href="#cgi.SCRIPT_NAME#?start=#start+step#"><img
src="images/next_blue.png" alt="Next" align="absbottom"
/></a>
</cfif>
<cfif (start+step+step) lte queryResults.recordcount>
<a
href="#cgi.SCRIPT_NAME#?start=#queryResults.recordcount-step+1#"><img
src="images/end_blue.png" alt="End" align="absbottom"
/></a>
</cfif>
</p>
</cfoutput>
</cfif>
<cfloop query="queryResults" startrow="#start#"
endrow="#start + step/3-1#">
<table width="100%" border="1" bordercolor="#FFFFFF"
cellspacing="0" cellpadding="2">
<tr> <cfoutput query="queryResults"
startrow="#start#" maxrows="3">
<td width="33%"
class="style1">#queryResults.ART_TITLE#</td>
</cfoutput>
<cfset #start# = #start# + 3>
</tr>
</table>
</cfloop>
</td>
</tr>
</table></form>
It seems that the CATEGORIES filter is the only one that does
not return a ERROR EXECUTING DATABASE QUERY error. However, it does
not filter all the records... it only seems to filter and return
the first 4 or 5 records.
Any thoughts?

your queryResults query selects only from ART table, while in
the WHERE
clause you are apparently using other tables whihc are not in
your FROM
clause...
you need to use JOIN/INNER JOIN/LEFT JOIN/RIGHT JOIN in your
FROM clause
to link the other tables. check your db manual for proper
usage of those
operators.
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com/

HOW TO FIND AND CORRECT THE SQL QUERY ERRORS ????

Sometimes I get the errors while executing the sql queries.
I just wanted to know about the various ways by which I can find the sql query errors .
Any suggestions will be deeply appreciated.

If you get the an error from SSMS and you can't comprehend it, you can google the error message and google would always lead you to the correction. Or you can post the error in this forum, people
here are always kind and ready to help :).
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

Query error OLAP BO Universe

Similar Messages

Maybe you are looking for