Query filter doesnt work after switching on hierarchy

I have 0CALMONTH as a mandatory selection criteria on a Bex query. After the result output if the user switches on a virtual time hierarchy / physical hierarchy created on CALMONTH,(year-quater-month) then the query filter entered on 0CALMONTH is ignored and data for all years is displayed. Is there any way to avoid this? Since we want to use this hierarchy in multiple reports, can this problem be avoided by any hierarchy settings?

Hi Godbole Yogesh,
We can ignore the hiearchey from second level i.e. Calmonth level . In hiearchey settings, level of dispay we have is one. by this setting we will be able to see only first of of hiearchey i.e. calday node.
Pls let me know if you want any further info..
Cheers,
Maruthi

Similar Messages

Query Views on Workbook - filter doesnt work

Hi All,
I have developed a workbook using a query view, When i try to do filtering using the filter button the workbook data does'nt change. Can anyone of you advise what needs to be done.
Thanking you.

HI Rohith,
Thanks for the quick response.
I tried out what you have mentioned, it didnt work. query view is inserted into a data grid and created the workbook. Filter funtionality is available and its currently working during variable value entry. Once the report is generated filter doesnt work.
any suggestions?
Thanks.

IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.

iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus. How can I get the notifications working?

Contact your carrier - voicemail, and visual voicemail, is a carrier feature.

Why my hp mini 5101 the "7" key doesnt work after upgraded the bios?

why my hp mini 5101 the "7" key doesnt work after upgraded the bios?
The current bios version is F.07

korpx,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

How do i get my apple email to work after switching to icloud?

how do i get my apple email to work after switching to icloud?

I'm on OS 10.6.8 (Snow Leopard) with Mac Mail 4.5.
Will deleting a .mac account in Mac Mail lose all saved emails, drafts, etc? I'm afraid of losing all my stuff.
I just switched to iCloud last night and now I can access my mail only through the iCloud web interface. Mac Mail will not work with my .mac email account. But it still works for my other non-Apple addresses.

Adressbook doesnt work after update to 10.7.3 PB says your adressbook is 5.0.3. Can anyone please help?

Adressbook doesnt work after update from Snow Lepard to Lion 10.7.3 PB says your adressbook is 5.0.3.
PB says You have adressbook 10.5.3, yes, but now?
Can anyone please help?

Use the copy of AddressBook that is in your Applications folder, not the one on your Dock that's linked to a transplanted copy of the prevoius AddressBook App.

The front camera of my iPad 3 doesnt work after updated ios7

The front camera of my iPad 3 doesnt work after updated ios7

Have you tried closing the Camera app completely and seeing if it works when you re-open the app ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
If neither fix it then you could try contacting Apple.

Ios 7, camera doesnt work after updating, iphone4

My iphone 4 camera doesnt work after updating on ios 7

completely erease the ipad and reinstall the OS.
Go to settings>general>reset>erease all content and settings. Wait for the ipad to finish then see if it works.

Imessaging doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

imessaging on ipod touch doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

Short of a reset to factory settings I've found making sure iMessaging is not left minimised helps. It doesn't seem to keep its connection. So, by closing after each use this helps. I've been doing this since I logged out of iMessaging at least 1/2 doz times and even changed my apple id pw as this had ceased to be recognised. I get fewer send failures now and don't have an inactive send button so much. Having said this its all a bit of a work around as iMessaging isn't behaving as it once did. If over time not resolved will do factory reset. All the best.

SharePoint 2013 List View with query string filter stops working after editing view from browser

I have created one list definition in which I have added one list view which will filter data from query string paramater
So when I am creating list from my list definition, view with query string filter is working fine.
But when I am modifying view from UI(I am not changing any thing , just opening "Modify View" page and then click on "Save" button), view gets stop working means it's not filtering data based on query string
Any suggestion what I am missing?
Below is my list view schema
<View BaseViewID="11" Type="HTML" TabularView="FALSE" WebPartZoneID="Main" DisplayName="$Resources:OIPLBScoreCard,viewFilterTasksByTarget;" MobileView="True" MobileDefaultView="False" Url="FilteredTasks.aspx" SetupPath="pages\viewpage.aspx" DefaultView="FALSE" ImageUrl="/_layouts/15/images/issuelst.png?rev=23">
<Toolbar Type="Standard" />
<ParameterBindings>
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_DEFAULT)" />
<ParameterBinding Name="TargetId" Location="QueryString(TargetId)" />
</ParameterBindings>
<JSLink>hierarchytaskslist.js</JSLink>
<XslLink Default="TRUE">main.xsl</XslLink>
<JSLink>clienttemplates.js</JSLink>
<RowLimit Paged="TRUE">100</RowLimit>
<ViewFields>
<FieldRef Name="Body"></FieldRef>
<FieldRef Name="Title"></FieldRef>
<FieldRef Name="StartDate"></FieldRef>
<FieldRef Name="DueDate"></FieldRef>
</ViewFields>
<ViewData>
<FieldRef Name="PercentComplete" Type="StrikeThroughPercentComplete"></FieldRef>
<FieldRef Name="DueDate" Type="TimelineDueDate"></FieldRef>
</ViewData>
<Query>
<Where>
<Eq>
<FieldRef Name="oipscTargetLookup" LookupId="TRUE"/>
<Value Type="Lookup">{TargetId}</Value>
</Eq>
</Where>
</Query>
</View>
I have one lookup field from "Target List" in my source list and I want to filter data based on that lookup field.

Hi JayJT,
The Miscellaneous is located in the contact list that you used for the connection.
So , you need to edit the page, then edit the contact list that you used, in the web part properties of the contact list, you will find Miscellaneous, then expand it and select ‘Server Render’ .
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Hifi mode doesnt work after xp reboot

To get the hifi mode to work, i have to remove the power plug at the back and put it in again, after restarting windows xp. Then it works. I hate doing this
ps even the hifi button doesnt work!
any fixes for this would be appreciated!
thanks
latest updates etc installed using msi update thingy
mega 865
tdk 4x dvdrw
512 ram
ati 9800 se 128

The Hi-Fi mode switch can not be used when the computer is turned on BUT if using the MMC III you will notice that the HI-FI will light up. Can you give us some more information on this ie does it happen if you start up XP and do not use the MMCIII, what happens if you shut your computer down by holding in the PC button? Have you tried this with your CD and AGP cards installed, has this always happened, Have you tried a boot disk to see if the operating system is upseting the LCD. If it works fine off a boot up disk then I would do a fresh install of your XP.

Drag and move doesnt work after 5 mintues

Hi,
If i start my system up, i can move a window by dragging the titlebar, but then after about 5 minutes it doesnt work anymore. Also i cant copy text by clicking left and moving the cursor. I have a Lenovo T410 and i am using the touchpad. I just freshly configured my system on a new ssd from vertex. Before i didnt have this issue and i copied my old xorg files to the new system but that didnt work either. I have no idea where the problem lies.
Thanks for your help!
Cheers Felix

Hi Igoksadze,
Welcome to Lenovo Community!
As per the query we understood that you are facing the issue with the system if the system wakes up the keyboard and mouse not working.
As per the query would like to give some trouble shooting steps:
Start>C Panel> System & Security> Power Options> Change Plan settings>Change adv power settings> (and look for the sleep tab / settings along with USB, etc).
Check if the USB port is disabled or enabled.
Also check in BIOS for the wake up power options.
Hope this helps! Do post us back for further queries.
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Droid 2 global doesnt work after new update

I have a droid 2 global but it is prepaid and now after the latest update it doesnt work. Can verizon replace my prepaid phone or do I have to purchase another phone?
<post moved to the "Droid & Droid 2" space from the "My Verizon" space for more exposure.>
Message was edited by: Verizon Moderator

Currently, I am not showing a way to remove the Street View for Google Maps application from the device. If you are adamant about removing this feature, the next available option would be doing a factory reset. This can be completed through the following steps:
Factory Reset option 1
From the main screen, touch menu tab
Touch Settings
Touch Privacy
Touch Factory Data reset
Touch Reset Phone
Touch Erase Everything
Warning: This will erase all data from your phone, including:
Your Google account
System and application data and settings
Downloaded Applications
It will not erase: Current System software and bundled applications; SD Card files, such as music or Photos
Factory Reset option 2 - Warning this will reset device back to original factory settings.
Turn off the phone
Power on phone while pressing "X" key on qwerty keypad - release "X" and power key after you see Motorola batwings.
You should now see an "!" in a triangle with Android guy
Press the "Search" key on qwerty keypad to enter factory menu, this will unhide the menu and show the following options
Reboot system Now
Apply sdcard:update.zip
Wipe Data/Factory Reset
Wipe Cache Partition
Use Vol Up / Vol down to navigate to "wipe data/factory reset" and then use Camera side key or Menu key to select "wipe data/factory reset"
Use Vol Up / Vol down to navigate to "Yes delete all user data" and then use Camera key to select "Yes - delete all user data"
Wait for operation to complete (maybe 1 minute or so) and then press camera key to select "reboot system now"

Screen rotation doesnt work after upgrading to lolipop

After upgrading my phone to lolipop the auto rotation doesnt work even in the safe mode

@alahmed
Repair your phone with PCC and report back
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Query Filter not working - Lookup Community ID based on Community name

I want to lookup Community ID based on the Community name. I tried the following code to filter the results and got a PTException. I'd appreciate any insight on to what I am doing wrong or a any other pointers to better implement this.
// Build a filter for querying the community id by name
Object[][] arrFilter = newObject[3][1];
arrFilter[0][0] = newInteger(PT_PROPIDS.PT_PROPID_NAME); //Operand
arrFilter[1][0] = newInteger(PT_FILTEROPS.PT_FILTEROP_EQ_NOCASE); //Operator
arrFilter[2][0] = newXPStringBuilder(_strCommName); //Value
IPTQueryResult qrCommunities = _ptSession.GetCommunities().Query(
PT_PROPIDS.PT_PROPID_OBJECTID | PT_PROPIDS.PT_PROPID_NAME, //Props
-1, //Folder to look in, -1 for "all"
PT_PROPIDS.PT_PROPID_NAME, //Property to order by
0, //Number of rows to skip, used for pagination
-1, //Max rows to return, used for pagination. -1 means no limit
arrFilter); //Filter to apply to results
Thanks.
Vanita
Staples

Also if you dont want to use the server API you can use the code below with the SOAP interface
privatestringGetCommunityName(intiCommunityID)
stringsCommunityName = "";
//try to establish the remote session
try
if(log.IsDebugEnabled)
log.Debug("Start remote session attempt");
PortletRemoteSession = PortletContext.GetRemotePortalSession();
catch(Exception ex)
ErrorLabel.Visible = true;
ErrorLabel.Text = "Error esablishing remote session";
log.Error("Error esablishing remote session" + ex.Message);
if(log.IsDebugEnabled)
log.Debug(ex.Source);
log.Debug(ex.StackTrace);
//init the ObjectManager api to get the community name
IObjectManager oObjectManager = null;
try
if(log.IsDebugEnabled)
log.Debug("Start OBJ Man build");
//create the search request
oObjectManager = PortletRemoteSession.GetObjectManager(ObjectClass.Community);
//deine the admin folders to search
intfolderID = -1;
intstartRow = 0;
intmaxRows = -1;
//define the return result sort order a bit invalid in this case
ObjectProperty sortProperty = CommunityProperty.Name; ;//sort on the unique name
boolascending = true;
//what do we want back from this search
ObjectProperty[] propsToReturn = newObjectProperty[1];//choose to return specific properties
propsToReturn[0] = CommunityProperty.Name;
//build the query filter we only want the community name from the passed id
QueryFilter[] filters = newQueryFilter[1];//filter the results
filters[0] = newIntQueryFilter(CommunityProperty.ObjectID, Operator.Equals, iCommunityID);//filter results on community id
if(log.IsDebugEnabled)
log.Debug("Start OBJ Man query");
//do the search
IObjectQuery queryResults = oObjectManager.QueryObjects(folderID, startRow, maxRows, sortProperty, ascending, propsToReturn, filters);
if(log.IsDebugEnabled)
log.Debug("results returned = " + queryResults.GetRowCount());
//we should only ever get one result here
if(queryResults.GetRowCount() != 1)
log.Fatal("We have more than one community name result - warning Will Robinson warning");
thrownewException("We have more than one community name result");
//assign the name to the return var
IObjectQueryRow queryObject = queryResults.GetRow(0);
sCommunityName = queryObject.GetStringValue(CommunityProperty.Name);
catch(Exception ex)
if(log.IsDebugEnabled)
log.Debug("Search error - " + ex.Message);
ErrorLabel.Visible = true;
ErrorLabel.Text = ex.Message.ToString();
finally
//clean up
if(oObjectManager != null)
oObjectManager = null;
//and return the community name
returnsCommunityName;

Query filter doesnt work after switching on hierarchy

Similar Messages

Maybe you are looking for