Query for Balance Sheet comparison Actual/Plan

Hello,
I try to create a query in the BEx using the cube 0FIGL_V10 to display the balance sheet and p/l statement in BI. It works fine with comparison actual/actual but I don't know how to make a comparison between actual and plan figures.
I am using as filter criteria the dimensions value type ([0VTYPE 10 which is actual and 0VTYPE 20 which is plan). But how is it possible to display it in the right line and columns.
I need to fix this be the end of next week. So please answer as soon as you can.
Thanks a lot for your help.
Regards
Robert

Hello Sam,
thanks a lot for you pretty good answer. It works perfectly but there is one thing left, maybe you can answer that too:
I want to display 3 actual periods but only one plan period. How can I realize this?
Thanks again for your prompt help.
Regards
Robert

Similar Messages

  • BEST Practice for Balance sheet and Investment Planning

    hi all
       I need the Best Practice guides for Balance sheet and Investment Planning
    where can i get it ?
    if someone has them please could you mail them to [email protected]
       also if someone has documentation regarding these please forward them also
    Points assured
    Thanks in advance
    Nidhi

    Hi Nidhi,
    Refer to the below link for the available scenarios
    http://help.sap.com/bp_biv335/BI_EN/html/Bw.htm

  • Setting up Balance Account for Balance Sheet in Hyperion Planning

    We are using version 11.1.2.1.0.83 of Hyperion Planning. What is the best way to setup a balancing account for the balance sheet? Should it be store, or dynamic calc? Should a Member formula be used or should it be done via a calc script? What would the member formula look like?

    Hmm, I give you the answer, you mark it as answered but don't give me any points, and now you ask another question? I only do this for the points. <grin>
    I am still curious as to whether this can be accomplished by embedding a member formula in the balancing account and, if so, what the embeded formula script might look like. ^^^The formulas I illustrated and you implemented could be put into a dynamically calculated member. So long as the account to be balanced is first (I am thinking calculation order) the dynamic calc should be just fine. I've used that approach in Planning apps in the past.
    Regards,
    Cameron Lackpour

  • How To Query for Balance Sheet Report

    dear experts,
    I have no experience in accounting. I want to create Balance Sheet Crystal Report like B1. If u have any idea, pls let me know.
    best regards,
    zzymt

    Hi,
    From the JDT1 table you need to sum the amounts of debit and credit fields to get the value based on the refdate field. Taking a total before a refdate will be the opening balance and during the reporting period with the current balance.
    Check if you get the desired result.
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • Function types for Balance Sheet Planning missing in SEM-BPS 6.0

    Hi BPS experts,
    After upgrading our BI-system from SEM 4.0 to SEM 6.0 (level 10) as part of the upgrade from BW 3.5 to BI 7.0 (level 15), the BPS function types for balance sheet planning are not available in the planning environment (Transaction code BPS0).
    According to the SAP Library the balance sheet planning functions in SEM-BPS comprises of 6 standard function types - one of them is "Depreciation":
    <a href="http://help.sap.com/saphelp_sem60/helpdata/en/0a/242537cedf2056e10000009b38f936/frameset.htm">help.sap.com -> Business Planning and Simulation (BW-BPS)</a>   
    Menu path: Business Planning Functions -> Functions for Balance Sheet Planning
    In our existing SEM 4.0 we are using "Depreciation" and the functions based on this function type are of course short dumping when executed in our upgraded system (SEM 6.0) as the function type does not exist here.
    Odd though - we do have the function type "Allocation" available in SEM 6.0, which should be delivered with SEM together with the Balance Sheet Planning function types (It is listed directly under "Business Planning Functions" in the SAP Library) .
    I have tried to figure out whether we missed out on activating something during or after the system installation, but our basis consultant has not found anything in the installation guides related to this issue. Also I was wondering whether it could be a simple matter of activating some Business Content but without any luck.
    Does anybody know why the Balance Sheet Function Types are not available in SEM-BPS 6.0?
    Kind regards,
    Lars
    PS: Our system status is:
    SAP_ABA     700     0013     SAPKA70013     Cross-Application Component
    SAP_BASIS     700     0013     SAPKB70013     SAP Basis Component
    PI_BASIS     2005_1_700     0013     SAPKIPYJ7D     PI_BASIS 2005_1_700
    ST-PI     2005_1_700     0005     SAPKITLQI5     SAP Solution Tools Plug-In
    SAP_BW     700     0015     SAPKW70015     SAP NetWeaver BI 7.0
    FINBASIS     600     0010     SAPK-60010INFINBASIS     FINBASIS 600 : Add-On Supplement
    SEM-BW     600     0010     SAPKGS6010     SEM-BW 600 : Add-On Supplement
    BI_CONT     703     0007     SAPKIBIIP7     Business Intelligence Content
    Message was edited by:
            Lars B Rasmussen

    Hi Lars,
    It seems not all the planning function from SEM BPS are available in BW BPS. Please check the links below: -
    what is the difference between BW 3.5 BPS and SEM BPS 4.0
    BW- BPS and SEM- BPS
    SEM-BPS VS BW-BPS
    BCS Doc
    Regards,
    SK

  • Upload plan data for balance sheet accounts

    Hi Experts,
    Is there a way to upload plan data for balance sheet accounts? I can upload revenue/cos and expenses through the profit center and cost center uploading but need to upload balance sheet accounts as well. Any  help would be much appreciated. Thank you.

    Loading balance sheet accounts using the Excel load to profit center tells me that I selected balance sheet accounts that cannot be entered manually. Not sure what this means... if I have an accounts receivable account, how would I find another equivalent account?

  • Balance Sheet * Cash Flow Planning

    Hi
    Did any body did the balance sheet and cash flow planning along with cost center planning and integrated with balance sheet in the BCS ? If yes, please provide the information on the approach to create these plans like how the data model should be and what are the various challenges that are encounter ?
    Any insight or documentation on the approach is highly appreciated. I know we have delivered cube for Balance sheet and cash flow but there is very little documentation available for that cube.

    Hello Raj,
    I have worked on Balance Sheet Planning and relied on BW query for Cash Flow statement using Profit Center Planning. Also we used BCS actuals data in BPS for the purpose of rolling Forecasting.  In this way we had actual Balance Sheet numbers as well as forecasted numbers based on current forecast version in BPS cube.
    For the purpose of Balance Sheet calculation (SEM-BPS 3.5 version) standard delivered balance sheet functions were used, such as Cumulative balance, Offset function, Timelag, Depreciation etc.  We are live based on this functionality and things are working as expected.
    I hope this helps.
    Sachin

  • Profit center Document is not created for Balance sheet items

    < MODERATOR:  Message locked.  Please post this message in the [Controlling forum|SAP ERP Financials - Controlling;. >
    Dear all,
    Profit center document is not created for balance sheet accounts , where i specified in 3KEH (default profit center for balance sheet a/c's) , i did n't do any changes , if i do any changes in dev , then i will transport to quality  there is no pending requests
               Same entry In quality environment profit center is updating and creating profit center document  for balance sheet accounts . I compared with actual posting settings like  Maintain Document Types and Define Number Ranges for Local Documents but it is same as development
    regards
    Govind
    Edited by: Govind Yadav on Sep 24, 2008 8:33 PM

    Is any body find the solution of this problem
    I am also facing the same problem Profit center document is not getting created from any MM document
    3KEH configuration is there but still the system not generating the Profit center document for those materials where there is no profit center assigned in the material master data and in 3KEH i have configured that it should post to dummy if there is no profit center in the material master data
    Please tell me if some one have the solution to this problem
    Bilal

  • Function module in BW for Balance Sheet

    Dear all,
    i have a request to create a FM for BW module.I'm new at abap in BW so i want kindly to ask you to help me with some material or knowledge that you have.
    The specific request is for Balance Sheet. It is done in BW with routine but i have to add this routines in one functional modul.The misunderstanding for me is that this routine use some standard form (like compute_data_field which is call dynamically ) for input parameter and i'm not sure in my FM how to take the same input parameter.
    If someone have some expirience with this i will rewards with points
    Thank you.

    In the BeX, when you are creating the query, you need to create a variable to the object by doing the following:
    1 Select the object in the leftside
    2 create new variable
    3 in the variable select the eleboration with customer exit
    4 after creating the variable, go into transaction CMOD
    5 Select the project for BW, if you don't have one, just create it. (You need to include it into the data packet for BW, if you don't have you must create it otherwise you'll get the data packet tmp and you cannot transport it)and select the Henancement Assignment RSAP0001.
    3 In the components area you'll get 4 functional exit:
    EXIT_SAPLRSAP_001
    EXIT_SAPLRSAP_002
    EXIT_SAPLRSAP_003
    EXIT_SAPLRSAP_004
    click on the first exit and than click on INCLUDE ZXRSAU01
    in this include you go in the change mode and input this kind of code:
    WHEN 'name of the variable'.
    PERFORM and input your code.
    Rgs
    Antonino

  • Budgeting for balance sheet accounts

    Hi Expert,
    I have activated the profit center accounting for my company. Now the users can use the PCA functions. They are planning to do budget process in SAP. There is no problem to enter budget for P&L accts. But they want to enter budget for balance sheet acct as well.
    how to set the configurations to allow entering of budget for balance sheet accts ? Please advise the stepo by step procedure. After done with the configurations, any additional month end closing steps to be performed ? Do I stuill need to create cost element accts for the balance sheet GL accts, like the cost element for P&L accts ?
    Thanks.
    Angel.

    Hi,
    I assume by referring to Budgeting, you require Availabiility control as well.
    Budgeting and availability control for Balance sheet and P&L accounts is available in Funds Management  under Public sector Management functionality.
    Njoy
    Siva

  • Default profit centers Plant wise for Balance Sheet tax relevant Items.

    Dear All,
    We have an issue in profit center acccounting.
    In balance sheet accounts, Vat input tax payable, TDS payable, Cenvat clearing etc are picking profit center from 3KEH. When Exicse is getting captured cenvat clearing account having the profit center but while doing the MIRO cenvat clearing do not have profit center & plant.
    Why it is so?
    Basically we are doing the following steps.
    1. Purchase order creation ME21N.
    2.Goods received via migo
    3. invoice receipt via miro.
    At the time of miro posting, system creates automatically accounting document, with default profit center maintained in 3KEH, which are assigned to Vat input tax payable, TDS payable, other tax accounts. For GR/IR clearing account right profit center is picking without any mistake, while doing MIGO & MIRO.
    We need to extract the Balance Sheet profit center wise at plant level.
    Derivation rule is created for this balance sheet account along with Valuation area condition to post to correct profit center maintained under Tcode: 3KEI . But system is taking only default profit center (3KEH).
    I have checked configuration and the following areas like Material master costing view, tax code areas, and account group but did not find any mistake.
    Please advice and Guide us, how to get correct profit center at plant level for these balance sheet accounts instead of default. (I want to make default profit centers plant wise).
    It is urgent.
    Thanks,
    Shailendra Gupta.

    Hi!
    You can use following report :
    S_ALR_87013336 (Report for Balance sheet at Profit Center and Group Level).
    Hope this will help.
    Thanks & Regards,
    Taral Patel

  • Business Area is not  pulling for Balance Sheet Accounts

    Hi,
    For few Balance Sheet GL Accounts (From MM side), Business area is not pulling while doing MM Cycle. For other Balance Sheet GL Accounts (From MM side), system is pulling the Business area by default.
    I have checked all the Field Status Group configuration and all. Still could not find the route cause for this. Can any one help me why it is not pulling Business area for Balance sheet accounts when doing MM cycle.
    what should i do if system has to pull Business area for Inventory Related Balance sheet GL Accounts?
    Kindly Help me..
    Thanks
    Sunil

    Hi,
    in OMJ7, assignement were there properly. Still why i am not able to pull Business area for  Balance Sheet Accounts.
    I Can give one Clue: For Inventory Finished Goods, system is pulling Business area and for Inventory Raw material and Inventory Semi-Finished Goods system is not pulling the Business area.
    This is my problem...
    Thanks
    Sunil

  • Cost center empty in general ledger view for balance sheet accounts

    Hi !
    We are implementing ECC6 with new GL functionalities. We activated differents scenarii: cost center, profit center and segment.
    Using FB03 (display document) we noticed that in the entry view, everything is fine: cost center, profit center and segment are filled successfully.
    However, in the New GL view, the cost center is not filled for balance sheet accounts.
    Any solution?
    Regards,
    Julien

    HI,
    Cost center will never be filled for the Balance Sheet account. For Balance sheet account Profit Center is required to be filled.
    Don't be afraid this is the fundamental practice across the globe. Cost centers will be filled in only Expense account.
    Exception to above rule is Asset master will recieve cost center because this will help in determining asset per department.
    Regards,
    Chintan Joshi.

  • Tables for Balance sheet Items.

    Dear All,
    I want to know the tables for Balance Sheet items like Current Assets Current Liabilities etc like where the
    cumulative amounts of there  accounts goes ?
    If not so given in SAP please suggest me the procedure for How to get there amounts in respective tables.
    Regards,
    Pankaj.

    Hi
    Michael.
    The balances given over here in GLT0 and there respective fields are as on date balance as per Trial balance ?
    My basic requirement is that the table should show the balances as per updated Trial Balance.
    Please Help.
    Regards,
    Pankaj.

  • JVA: CutBack for Balance Sheet Accounts

    Hi all,
    We have some business requirements where for some specific processes we need to cuback the amounts regarding Pre-Payments or depreciation amounts of non-production assets (moveable assets like cars).
    The problem seems that those amounts are in Balance Sheet accounts (of course, for the depreciation amounts the P/L side can be cutbacked without issues).
    So, my question is; How can we cutback the amounts posted to the Balance Sheet GL accounts since these don't require any cost object.
    Br,

    Hi there,
    GJ49 and GJ83 will not help in this case.
    you have to use substitution rule in FI and JV to default recovery indicator for balance sheet cutback
    kindly note based on the billing indicator you have chosen at company code recovery indicator derivation will work, you can however overwrite using substitution
    I hope this helps
    Thanks & Regards
    Kalpesh Chavda

Maybe you are looking for