Query for Closing Stock goes beyond a particular value.

Hi,
The query for the following requirement:
The Closing Stock goes beyond a particular value. The Closing Value of items crosses the pre-defined value.

Hi,
Yes it is related to the user selected date and stock level. Not answered Closing the thread.
Edited by: Neela M B on Aug 28, 2010 3:08 PM

Similar Messages

Closing stock as off a particular date

How to write a query for closing stock (in quantity) for all items by group by warehouse for a particular date?
Thank you.

the standard stock count in SAP B1 (Inventory>> Inventory Transaction >> Initital Quantity, Inventory Tracking, Stock Posting) is "real time" and not back-dated and the screen will display all items irrespective whether there is stock balance in the system. Anyone has a query where able to have the stock balance generated at any cut-off date, i.e. the stock count can be back-dated and only display those items with quantity (in the system) as at that cut-off date .
Thank you.

Z table for Closing Stock

Hi ,
My requirement is to make Z table for closing stock.
As ours is a pharma firm and we have implemented SAP in Aug 2008.
Now for closing stk we are using S033 and MSEG table to get opening stk
SELECT SUM( mzubb ) SUM( magbb ) INTO (w_dr_menge , w_cr_menge)
        FROM s033
       WHERE sptag < so_fkdat-low
         AND werks = werks
         AND matnr = matnr.
w_opening_balance = w_dr_menge - w_cr_menge.
and for closing stk = opening stk - sale + receive.
Now the problem is when we want to retrieve data for closing stk for last month ,it is checking all the records since Aug 2008 for opening stk and it is taking too much time to retrieve data.
Can anyone plz suggest any alternative for thsi problem.
I will really appriciate your help.
Regards,
Archana

Hi
done this before. for sure you will experience an performance problem in your current setup. what we did is we create a program that calculates the ending inventory of the month then beginning inventory of the following month we are executing this in every end of the month. In that case when we need to access the previous month the ztable must be use. make sure that your program can do rerun of the ending and beginning of stock because there are chances of previous posting of reversals.
Thanks,
Best regards,
Etrafanob

Functon module for closing stock

Hi All,
Is there any function module is there to findout closing stock by taking opening stock .
Thanks&regds,
Sree.

I have one report for closing and opening stock go through it
*& Report Z_OPEN_CLOSE                                                *
REPORT Z_OPEN_CLOSE MESSAGE-ID YW2 LINE-SIZE 231 LINE-COUNT 45
NO STANDARD PAGE HEADING.
Type Declaration *
TYPE-POOLS SLIS.
Tables *
TABLES: MKPF, " Material Document: Header Data
        MSEG, " Material Document: Item Data
        MARA,
        MARD,
        S031,
        EKKO,
        EKPO,
        LIKP,
        MAKT,
        J_1IWRKCUS,
        T001W,
        WB2_V_MKPF_MSEG2,
        MMIM_REP_PRINT,
        YW2_STKMOVEMENTS,
        YPLNT,
        MARDH.
Internal Tables *
DATA: I_WERKS LIKE J_1IWRKCUS OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_YPLNT OCCURS 0,
         PPLNT LIKE YPLNT-PPLNT,
         WPLNT LIKE YPLNT-WPLNT,
      END OF I_YPLNT.
DATA: BEGIN OF I_MKPF OCCURS 0,
        MBLNR LIKE MKPF-MBLNR,
        MJAHR LIKE MKPF-MJAHR,
        BUDAT LIKE MKPF-BUDAT,
        VGART LIKE MKPF-VGART,
        BWART LIKE MSEG-BWART,
        MATNR LIKE MSEG-MATNR,
        WERKS LIKE MSEG-WERKS,
        LGORT LIKE MSEG-LGORT,
        MENGE LIKE MSEG-MENGE,
        MEINS LIKE MSEG-MEINS,
        KUNNR LIKE MSEG-KUNNR,
        ZEILE LIKE MSEG-ZEILE,
        XAUTO LIKE MSEG-XAUTO,
        SHKZG LIKE MSEG-SHKZG,
        MATNR1 LIKE MSEG-MATNR,
      END OF I_MKPF.
DATA: BEGIN OF I_MARDH OCCURS 0,
       WERKS LIKE MARDH-WERKS,
       MEINS LIKE MARA-MEINS,
       MATNR LIKE MARDH-MATNR,
       LGORT LIKE MARDH-LGORT,
       LABST LIKE MARDH-LABST,
       LFGJA LIKE MARDH-LFGJA, "Added -MB
       LFMON LIKE MARDH-LFMON, "Added -MB
       PERIO(6),
       INSME LIKE MARDH-LABST,
       EINME LIKE MARDH-LABST,
       SPEME LIKE MARDH-LABST,
       RETME LIKE MARDH-LABST,
       O_STK LIKE MARDH-LABST, " Opening Stock
       C_STK LIKE MARDH-LABST, " Closing Stock
      END OF I_MARDH.
DATA: BEGIN OF I_MARD OCCURS 0,
       WERKS LIKE MARD-WERKS,
       MATNR LIKE MARD-MATNR,
       LGORT LIKE MARD-LGORT,
       LABST LIKE MARD-LABST,
       INSME LIKE MARD-LABST,
       MEINS LIKE MARA-MEINS,
       EINME LIKE MARD-LABST,
       SPEME LIKE MARD-LABST,
       RETME LIKE MARD-LABST,
      END OF I_MARD.
DATA: I_MARD1 LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: I_MARDH1 LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_MKPF1 OCCURS 0,
        MBLNR LIKE MKPF-MBLNR,
        WERKS LIKE MSEG-WERKS,
        MATNR LIKE MSEG-MATNR,
        BUDAT LIKE MKPF-BUDAT,
        BWART LIKE MSEG-BWART,
        MJAHR LIKE MKPF-MJAHR,
        VGART LIKE MKPF-VGART,
        LGORT LIKE MSEG-LGORT,
        MENGE LIKE MSEG-MENGE,
        MEINS LIKE MSEG-MEINS,
        XAUTO LIKE MSEG-XAUTO,
        SHKZG LIKE MSEG-SHKZG,
      END OF I_MKPF1.
DATA: BEGIN OF I_MKPF2 OCCURS 0,
       WERKS LIKE MSEG-WERKS,
       MATNR LIKE MSEG-MATNR,
       BUDAT LIKE MKPF-BUDAT,
       BWART LIKE MSEG-BWART,
       MJAHR LIKE MKPF-MJAHR,
       VGART LIKE MKPF-VGART,
       LGORT LIKE MSEG-LGORT,
       MENGE LIKE MSEG-MENGE,
       MEINS LIKE MSEG-MEINS,
       XAUTO LIKE MSEG-XAUTO,
     END OF I_MKPF2.
DATA: BEGIN OF I_FINAL5 OCCURS 0,
       WERKS LIKE MSEG-WERKS, " Plant
       MATNR LIKE MSEG-MATNR, " Material
       LGORT LIKE MSEG-LGORT, " Storage Location
       BUDAT LIKE MKPF-BUDAT, " Posting Date
       MTART LIKE MARA-MTART, " Material Type
       SPMON LIKE S031-SPMON, " Month
       MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
        MEINS LIKE MSEG-MEINS,
        O_STK LIKE MARDH-LABST, " opening stock
        TRECEP LIKE MARDH-LABST, " total receipts
        PRODU LIKE MARDH-LABST, " Net Receipts - Production
        RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
        SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
        TDISP LIKE MARDH-LABST, " total dispatches
        CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
        OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
        TLOSS LIKE MARDH-LABST, " Total Loss
        TRLOSS LIKE MARDH-LABST, " Transit Loss
        WHLOSS LIKE MARDH-LABST, " Warehouse Loss
        C_STK LIKE MARDH-LABST, " Closing Stock
        TRFSTK LIKE MARDH-LABST, "Transfer stock
        MENGE LIKE MSEG-MENGE,
        OTHADJ LIKE MARDH-LABST,
      END OF I_FINAL5.
DATA: BEGIN OF I_FINAL OCCURS 0,
        WERKS LIKE MSEG-WERKS, " Plant
        MATNR LIKE MSEG-MATNR, " Material
        BUDAT LIKE MKPF-BUDAT, " Posting Date
        MTART LIKE MARA-MTART, " Material Type
        SPMON LIKE S031-SPMON, " Month
        MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
        MEINS LIKE MSEG-MEINS,
        O_STK LIKE MARDH-LABST, " opening stock
        TRECEP LIKE MARDH-LABST, " total receipts
        PRODU LIKE MARDH-LABST, " Net Receipts - Production
        RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
        SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
        TDISP LIKE MARDH-LABST, " total dispatches
        CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
        OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
        TRFSTK LIKE MARDH-LABST, "Material Transfer stock
        TRLOSS LIKE MARDH-LABST, " Transit Loss
        WHLOSS LIKE MARDH-LABST, " Warehouse Loss
        TLOSS LIKE MARDH-LABST, " Total Loss
        C_STK LIKE MARDH-LABST, " Closing Stock
        OTHADJ LIKE MARDH-LABST,
       END OF I_FINAL.
DATA: I_FINAL1 LIKE I_FINAL OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_FINAL_TEMP OCCURS 0,
        WERKS LIKE MSEG-WERKS, " Plant
        MATNR LIKE MSEG-MATNR, " Material
        MTART LIKE MARA-MTART, " Material Type
        MAKTX LIKE MAKT-MAKTX, " Description
        MEINS LIKE MSEG-MEINS,
        O_STK LIKE MARDH-LABST, " opening stock
        TRECEP LIKE MARDH-LABST, " total receipts
        PRODU LIKE MARDH-LABST, " Net Receipts - Production
        RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
        SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
        TDISP LIKE MARDH-LABST, " total dispatches
        CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
        OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
        TRFSTK LIKE MARDH-LABST, "Material Transfer stock
        TRLOSS LIKE MARDH-LABST, " Transit Loss
        WHLOSS LIKE MARDH-LABST, " Warehouse Loss
        TLOSS LIKE MARDH-LABST, " Total Loss
        C_STK LIKE MARDH-LABST, " Closing Stock
        OTHADJ LIKE MARDH-LABST,
      END OF I_FINAL_TEMP.
For Materials
DATA: BEGIN OF I_MARA OCCURS 0,
       MATNR TYPE MARA-MATNR,
       MTART TYPE MARA-MTART,
       MEINS LIKE MARA-MEINS,
       LABST TYPE MARD-LABST,
       MAKTX LIKE MAKT-MAKTX,
      END OF I_MARA.
DATA: BEGIN OF I_STKMVMNTS OCCURS 0,
       BWART LIKE MSEG-BWART,
       SHKZG LIKE MSEG-SHKZG,
       VZBEW LIKE YW2_STKMOVEMENTS-VZBEW,
      END OF I_STKMVMNTS.
DATA: BEGIN OF I_FINALT OCCURS 0,
       WERKS LIKE MSEG-WERKS, " Plant
       MATNR LIKE MSEG-MATNR, " Material
       BUDAT LIKE MKPF-BUDAT, " Posting Date
       MTART LIKE MARA-MTART, " Material Type
       SPMON LIKE S031-SPMON, " Month
       MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
       MEINS LIKE MSEG-MEINS,
       O_STK LIKE MARDH-LABST, " opening stock
       TRECEP LIKE MARDH-LABST, " total receipts
       PRODU LIKE MARDH-LABST, " Net Receipts - Production
       RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
       SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
       TDISP LIKE MARDH-LABST, " total dispatches
       CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
       OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
       TRFSTK LIKE MARDH-LABST, "Material Transfer stock
       TRLOSS LIKE MARDH-LABST, " Transit Loss
       WHLOSS LIKE MARDH-LABST, " Warehouse Loss
       TLOSS LIKE MARDH-LABST, " Total Loss
       C_STK LIKE MARDH-LABST, " Closing Stock
       OTHADJ LIKE MARDH-LABST,
       MONTH(8) ,
      END OF I_FINALT.
DATA: IMKPFT LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT1 LIKE I_MKPF1 OCCURS 0 WITH HEADER LINE.
DATA: IMARDT LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: IMARDHT LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: T_FINAL LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT2 LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
FCAT is used for the field catalog
DATA: FCAT TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
                  WITH HEADER LINE INITIAL SIZE 0,
for excluding the ICONs from the application toolbar
      FEXC TYPE TABLE OF SLIS_EXTAB WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO is used for Grid Layout
      FS_LAYO TYPE SLIS_LAYOUT_ALV,
FEVENTS to handle the events TOP OF PAGE & USER_COMMAND
      FEVENTS TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
FHEADER is used for List header
      FHEADER TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
sort is used for sorting
      FSORT TYPE TABLE OF SLIS_SORTINFO_ALV WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
      FCAT1 TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
                WITH HEADER LINE INITIAL SIZE 0,
      FS_LAYO1 TYPE SLIS_LAYOUT_ALV,
      GT_LIST_TOP_OF_PAGE1 TYPE SLIS_T_LISTHEADER,
      FEVENTS1 TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
             WITH HEADER LINE INITIAL SIZE 0,
       FHEADER1 TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT
              KEY WITH HEADER LINE INITIAL SIZE 0,
       G_STATU_071 TYPE SLIS_FORMNAME VALUE 'Z_PFSTATUS',
       ALV_VARIANT1 LIKE DISVARIANT.
Variable Declaration *
TYPES: TRFF_TYPE_DEC_6_5(6) TYPE P DECIMALS 5.
DATA: FYEAR(4),
      MON(2),
      FYEAR1(4),
      MON1(2),
      OBAL LIKE MARD-LABST,
      CBAL LIKE MARD-LABST,
      INDEX TYPE I,
      COUNT,
      COUNT1 TYPE I,
      O_STK TYPE P DECIMALS 3,
      C_STK TYPE P DECIMALS 3,
      V_MJAHR LIKE MKPF-MJAHR,
      MONTHS TYPE TRFF_TYPE_DEC_6_5,
      MONTH TYPE I.
Global variables for handling ALV functionality
DATA: ALV_KEYINFO TYPE SLIS_KEYINFO_ALV,
      ALV_VARIANT LIKE DISVARIANT,
      ALV_LAYOUT TYPE SLIS_LAYOUT_ALV,
      ALV_REPID LIKE SY-REPID,
      ALV_PRINT TYPE SLIS_PRINT_ALV,
      ALV_DETAIL_FUNC(30),
      ALV_DEFAULT_VARIANT LIKE DISVARIANT-VARIANT,
      ALV_COLOURIZE_FIELDS LIKE MMIM_REP_PRINT-COLOR.
RANGES: R_BUDAT FOR MKPF-BUDAT.
*Added by Prabhu for year on 26.4.05.
DATA: IDATE LIKE R_BUDAT OCCURS 0 WITH HEADER LINE.
Selection Screen Elements *
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_WERKS FOR MARD-WERKS OBLIGATORY NO INTERVALS.
PARAMETER: P_SPMON LIKE S031-SPMON NO-DISPLAY .
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY,
                  S_LGORT FOR MSEG-LGORT NO-EXTENSION NO INTERVALS,
                  S_MBLNR FOR MKPF-MBLNR,
                  S_BUDAT FOR MKPF-BUDAT OBLIGATORY .
SELECTION-SCREEN END OF BLOCK BLK.
SELECTION-SCREEN BEGIN OF BLOCK BLK3 WITH FRAME TITLE TEXT-004.
      PARAMETER : MTART LIKE MARA-MTART DEFAULT 'FERT' NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK BLK3.
SELECTION-SCREEN BEGIN OF BLOCK BLK2 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN END OF BLOCK BLK2.
ADDED BY PRABHU FOR DAY-WISE REPORT.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-007.
PARAMETERS: D1 RADIOBUTTON GROUP P1 DEFAULT 'X',
              M1 RADIOBUTTON GROUP P1,
              Y1 RADIOBUTTON GROUP P1.
SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-006.
PARAMETERS: ALV_DEF LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF BLOCK B2.
DATA: S_BUDAT1 LIKE S_BUDAT OCCURS 0 WITH HEADER LINE."prabhu
Initialization *
INITIALIZATION.
PERFORM ALV_INIT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ALV_DEF.
PERFORM ALV_F4.
At Selection Screen
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_spmon.
PERFORM monat_f4.
At Selection Screen *
AT SELECTION-SCREEN.
checking for the layout
PERFORM ALV_CHECK.
authorisation check for the Plant
PERFORM auth_check.
Validation for the Plant
PERFORM VALIDITY_CHECK.
IF MTART NE 'FERT'.
    MESSAGE E041 WITH 'Material Type must be FERT Only...'.
ENDIF.
IF D1 = 'X'." On 26.4.05.
    P_SPMON0(4) = S_BUDAT-LOW0(4).
    P_SPMON4(2) = S_BUDAT-LOW4(2).
ELSE.
    P_SPMON0(4) = S_BUDAT-LOW0(4).
    P_SPMON4(2) = S_BUDAT-LOW4(2).
ENDIF.
LOOP AT S_BUDAT.
    IF S_BUDAT-HIGH IS INITIAL.
      S_BUDAT-HIGH = S_BUDAT-LOW.
      MODIFY S_BUDAT.
    ENDIF.
ENDLOOP.
IDATE-LOW = S_BUDAT-LOW.
IDATE-HIGH = S_BUDAT-HIGH.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
    EXPORTING
       I_DATE_FROM = IDATE-LOW
       I_DATE_TO = IDATE-HIGH
   IMPORTING
E_DAYS =
      E_MONTHS = MONTH
E_YEARS =
DATA: I(3) TYPE C.
I = S_BUDAT-LOW+4(2).
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*added by Prabhu for Only for Oneday.on 18.5.5
IF MONTH EQ '0'.
    MONTH = MONTH + 1.
ENDIF.
*added by Prabhu for Only for Oneday.on 18.5.5
DO MONTH TIMES.
    R_BUDAT-LOW = S_BUDAT-LOW.
    APPEND R_BUDAT.
ENDDO.
I = 0.
LOOP AT R_BUDAT.
    R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2) + I.
    I = I + 1.
    R_BUDAT-LOW+6(2) = '01'.
    MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
    CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
       EXPORTING
         DAY_IN = R_BUDAT-LOW
       IMPORTING
         LAST_DAY_OF_MONTH = R_BUDAT-HIGH
      EXCEPTIONS
        DAY_IN_NO_DATE = 1
        OTHERS = 2
    MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
    IF R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2).
      R_BUDAT-LOW = S_BUDAT-LOW.
      MODIFY R_BUDAT.
    ENDIF.
    IF R_BUDAT-HIGH4(2) = S_BUDAT-HIGH4(2).
      R_BUDAT-HIGH = S_BUDAT-HIGH.
      MODIFY R_BUDAT.
    ENDIF.
For Summary on 26.4.05.
    IF Y1 = 'X'.
      CLEAR R_BUDAT.
      REFRESH R_BUDAT.
      R_BUDAT-LOW = S_BUDAT-LOW.
      R_BUDAT-HIGH = S_BUDAT-HIGH.
      APPEND R_BUDAT.
      CLEAR R_BUDAT.
    ENDIF.
ENDLOOP.
At Selection Screen *
AT SELECTION-SCREEN OUTPUT.
Start of Selection *
START-OF-SELECTION.
V_MJAHR = P_SPMON+0(4).
Get plant distinction warehouse/production
PERFORM GET_PLANT_DISTINCTION.
Collect the data from various tables
PERFORM GETDATA_FG_STOCK.
here the number of rows in the output table is found
PERFORM OUTPUT_TABLE_CHECK.
here the top of the page code is written, that is to be displayed
in the output
PERFORM Z_TOP_OF_PAGE.
here ALV layout properties are set
PERFORM Z_LAYOUT_SETTINGS.
ALV EVENTS for TOP OF PAGE and for USER COMMAND
PERFORM Z_ALV_EVENTS.
The field catalog is defined for the Primary List is defined in
the subroutine CREATE_FIELD_CATALOG include program ZPRRDOCR_FCAT
PERFORM Z_CREATE_FIELD_CATALOG.
This is for displaying the output
PERFORM Z_REUSE_ALV_GRID_DISPLAY.
*& Form getdata_fg_stock
Getting data from standard tables
FORM GETDATA_FG_STOCK.
For getting the Start date & end date of the month
PERFORM get_month_dates.
Getting the Opening Stock from MARDH table
IF MON EQ '01'.
    MON1 = MON.
    FYEAR1 = FYEAR.
    MON = '12'.
    FYEAR = FYEAR - 1.
ELSE.
    MON1 = MON.
    FYEAR1 = FYEAR.
    MON = MON - 1.
    FYEAR = FYEAR.
ENDIF.
PERFORM GET_RECORDS_FROM_DB.
*added for Month Summary on 26.4.05.
LOOP AT R_BUDAT.
    S_BUDAT-LOW = R_BUDAT-LOW.
    S_BUDAT-HIGH = R_BUDAT-HIGH.
*for Month
    P_SPMON0(4) = S_BUDAT-LOW0(4).
    P_SPMON4(2) = S_BUDAT-LOW4(2).
*for summary.
    IF Y1 = 'X'.
      LOOP AT S_BUDAT.
        S_BUDAT1-SIGN = 'I'.
        S_BUDAT1-OPTION = 'NB'.
        S_BUDAT1-LOW = S_BUDAT-LOW.
        S_BUDAT1-HIGH = S_BUDAT-HIGH.
        APPEND S_BUDAT1.
        CLEAR S_BUDAT1.
      ENDLOOP.
    ENDIF.
    IMKPFT[] = I_MKPF[].
    IMKPFT2[] = I_MKPF[].
    IMARDT[] = I_MARD[].
    IMARDHT[] = I_MARDH[].
    PERFORM MONTH_WISE.
    PERFORM PROCESS_MOVEMENTS.
    PERFORM CALCULATE_OPENING_STOCK.
    PERFORM UPDATE_NON_TRANSACTION_ITMS.
    PERFORM DELETE_EMPTY_RECORDS.
    CLEAR: IMARDHT,IMARDT,IMKPFT1,IMKPFT,I_FINAL,I_FINAL5.
    REFRESH: IMARDHT,IMARDT,IMKPFT1,I_FINAL,I_FINAL5,IMKPFT.
ENDLOOP.
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*end of changes for month.
ENDFORM. " getdata_fg_stock
FORM MONAT_F4 *
F4-Hilfe für Monat *
FORM MONAT_F4.
DATA: BEGIN OF MF_DYNPFIELDS OCCURS 1.
          INCLUDE STRUCTURE DYNPREAD.
DATA: END OF MF_DYNPFIELDS.
DATA: MF_RETURNCODE LIKE SY-SUBRC,
         MF_MONAT LIKE ISELLIST-MONTH,
         MF_HLP_REPID LIKE SY-REPID.
FIELD-SYMBOLS: .
Wert von Dynpro lesen
GET CURSOR FIELD MF_DYNPFIELDS-FIELDNAME.
APPEND MF_DYNPFIELDS.
MF_HLP_REPID = SY-REPID.
DO 2 TIMES.
    CALL FUNCTION 'DYNP_VALUES_READ'
      EXPORTING
        DYNAME               = MF_HLP_REPID
        DYNUMB               = SY-DYNNR
      TABLES
        DYNPFIELDS           = MF_DYNPFIELDS
      EXCEPTIONS
        INVALID_ABAPWORKAREA = 01
        INVALID_DYNPROFIELD = 02
        INVALID_DYNPRONAME   = 03
        INVALID_DYNPRONUMMER = 04
        INVALID_REQUEST      = 05
        NO_FIELDDESCRIPTION = 06
        UNDEFIND_ERROR       = 07.
    IF SY-SUBRC = 3.
Aktuelles Dynpro ist Wertemengenbild
      MF_HLP_REPID = 'SAPLALDB'.
    ELSE.
      READ TABLE MF_DYNPFIELDS INDEX 1.
Unterstriche durch Blanks ersetzen
      TRANSLATE MF_DYNPFIELDS-FIELDVALUE USING '_ '.
      EXIT.
    ENDIF.
ENDDO.
IF SY-SUBRC = 0.
Konvertierung ins interne Format
    CALL FUNCTION 'CONVERSION_EXIT_PERI_INPUT'
      EXPORTING
        INPUT         = MF_DYNPFIELDS-FIELDVALUE
      IMPORTING
        OUTPUT        = MF_MONAT
      EXCEPTIONS
        ERROR_MESSAGE = 1.
    IF MF_MONAT IS INITIAL.
Monat ist initial => Vorschlagswert aus akt. Datum ableiten
      MF_MONAT = SY-DATLO(6).
    ENDIF.
    CALL FUNCTION 'POPUP_TO_SELECT_MONTH'
      EXPORTING
        ACTUAL_MONTH               = MF_MONAT
      IMPORTING
        SELECTED_MONTH             = MF_MONAT
        RETURN_CODE                = MF_RETURNCODE
      EXCEPTIONS
        FACTORY_CALENDAR_NOT_FOUND = 01
        HOLIDAY_CALENDAR_NOT_FOUND = 02
        MONTH_NOT_FOUND            = 03.
    IF SY-SUBRC = 0 AND MF_RETURNCODE = 0.
ASSIGN (MF_DYNPFIELDS-FIELDNAME) TO <MF_FELD>. " ==>> note 148804
<MF_FELD> = MF_MONAT.
      CALL FUNCTION 'CONVERSION_EXIT_PERI_OUTPUT'
        EXPORTING
          INPUT = MF_MONAT
        IMPORTING
          OUTPUT = MF_DYNPFIELDS-FIELDVALUE.
      COLLECT MF_DYNPFIELDS.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          DYNAME               = MF_HLP_REPID
          DYNUMB               = SY-DYNNR
        TABLES
          DYNPFIELDS           = MF_DYNPFIELDS
        EXCEPTIONS
          INVALID_ABAPWORKAREA = 01
          INVALID_DYNPROFIELD = 02
          INVALID_DYNPRONAME   = 03
          INVALID_DYNPRONUMMER = 04
          INVALID_REQUEST      = 05
          NO_FIELDDESCRIPTION = 06
          UNDEFIND_ERROR       = 07. "<<== note 148804
    ENDIF.
ENDIF.
ENDFORM.                                                    "MONAT_F4
*& Form get_month_dates
Calculating the Month Start & End Date
FORM GET_MONTH_DATES.
IF M1 = 'X'.
    FYEAR = P_SPMON+0(4).
    MON = P_SPMON+4(2).
    CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
    R_BUDAT-SIGN = 'I'.
    R_BUDAT-OPTION = 'BT'.
    CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
      EXPORTING
        I_DATE = R_BUDAT-LOW
      IMPORTING
        E_DATE = R_BUDAT-HIGH.
    APPEND R_BUDAT.
    CLEAR S_BUDAT.
    REFRESH S_BUDAT.
    S_BUDAT-SIGN = 'I'.
    S_BUDAT-OPTION = 'BT'.
    S_BUDAT-LOW = R_BUDAT-LOW.
    S_BUDAT-HIGH = R_BUDAT-HIGH.
    APPEND S_BUDAT.
ELSE.
    FYEAR = P_SPMON+0(4).
    MON = P_SPMON+4(2).
    CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
    R_BUDAT-SIGN = 'I'.
    R_BUDAT-OPTION = 'BT'.
    CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
      EXPORTING
        I_DATE = R_BUDAT-LOW
      IMPORTING
        E_DATE = R_BUDAT-HIGH.
    APPEND R_BUDAT.
ENDIF.
ENDFORM. " get_month_dates
*& Form output_table_Check
checking for records for output
FORM OUTPUT_TABLE_CHECK .
DESCRIBE TABLE I_FINALT LINES INDEX.
IF INDEX EQ 0.
    MESSAGE I041 WITH TEXT-005.
    LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. "OUTPUT_TABLE_CHECK
*& Form Z_TOP_OF_PAGE
for setting the details in the top of page *
has no formal paramters *
FORM Z_TOP_OF_PAGE.
DATA: V_MON(2),
V_YR(40),
V_FIN(18),
V_FIN1(48),
LOW(10),
HIGH(10).
V_MON = P_SPMON+4(2).
V_YR = P_SPMON+0(4).
FHEADER-TYP = 'H'.
FHEADER-INFO = 'Stock Register Report (FG Stock)'.
APPEND FHEADER.
CLEAR FHEADER.
*if m1 = 'X'.
CONCATENATE 'Month = ' v_mon '.' v_yr INTO v_fin.
fheader-typ = 'H'.
fheader-info = v_fin.
APPEND fheader.
CLEAR fheader.
*endif."prabhu on 18.5.5
IF D1 = 'X'.
    CLEAR S_BUDAT.
    LOOP AT S_BUDAT.
      CONCATENATE S_BUDAT-LOW6(2) '/' S_BUDAT-LOW4(2) '/'
      S_BUDAT-LOW+0(4) INTO LOW.
      CONCATENATE S_BUDAT-HIGH6(2) '/' S_BUDAT-HIGH4(2) '/'
      S_BUDAT-HIGH+0(4) INTO HIGH.
      CONCATENATE 'Date = ' LOW ' - ' HIGH INTO V_FIN1.
      FHEADER-TYP = 'H'.
      FHEADER-INFO = V_FIN1.
      APPEND FHEADER.
      CLEAR FHEADER.
    ENDLOOP.
ENDIF.
ENDFORM. " Z_TOP_OF_PAGE
*& Form Z_LAYOUT_SETTINGS
this is done for setting the properties for the layout of the *
grid *
has no formal paramters *
FORM Z_LAYOUT_SETTINGS.
FS_LAYO-ZEBRA = 'X'. " Output in Zebra pattern
FS_LAYO-DETAIL_POPUP = 'X'. " A popup window appears to give
FS_LAYO-DETAIL_TITLEBAR = TEXT-022.
FS_LAYO-COLWIDTH_OPTIMIZE = 'X'.
ENDFORM. " Z_LAYOUT_SETTINGS
*& Form Z_ALV_EVENTS
This is used for handling the events TOP OF PAGE and the USER *
COMMAND event *
has no formal paramters *
FORM Z_ALV_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      I_LIST_TYPE = 0
    IMPORTING
      ET_EVENTS   = FEVENTS[].
READ TABLE FEVENTS WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC = 0.
    FEVENTS-FORM = 'Z_TOPOFPAGE'.
    MODIFY FEVENTS INDEX SY-TABIX.
    CLEAR FEVENTS.
ENDIF.
READ TABLE FEVENTS WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC = 0.
    FEVENTS-FORM = 'Z_USER_COMMAND'.
    MODIFY FEVENTS INDEX SY-TABIX.
    CLEAR FEVENTS.
ENDIF.
ENDFORM. "Z_ALV_EVENTS
*& Form Z_CREATE_FIELD_CATALOG
here the field catalog is created for the primary list *
no formal parameters *
FORM Z_CREATE_FIELD_CATALOG.
for the Plant
FCAT-FIELDNAME = 'WERKS'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000005'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Plant'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Type
FCAT-FIELDNAME = 'MTART'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000006'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MatTyp'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material No.
FCAT-FIELDNAME = 'MATNR'.
FCAT-KEY = 'X'.
fcat-hotspot = 'X'.
FCAT-OUTPUTLEN = '000018'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Material'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Description
FCAT-FIELDNAME = 'MAKTX'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '000040'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Description'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Unit of Measure
FCAT-FIELDNAME = 'MEINS'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '03'.
FCAT-JUST = 'C'.
FCAT-SELTEXT_M = 'UOM'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'UNIT'.
APPEND FCAT.
CLEAR FCAT.
for the Plant
FCAT-FIELDNAME = 'MONTH'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '08'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MONTH'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Opening Stock
FCAT-FIELDNAME = 'C_STK'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Opening Stock'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
fcat-do_sum = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Total Receipts
FCAT-FIELDNAME = 'TRECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Receipts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Production
FCAT-FIELDNAME = 'PRODU'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Production'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Other Plant Receipts
FCAT-FIELDNAME = 'RECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Othr Plnt Recpts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Sales Return
FCAT-FIELDNAME = 'SAL_RET'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Sales Return'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Total Dispatches
FCAT-FIELDNAME = 'TDISP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Dispatches'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.

Function module/BAPI for closing stock

Hi,
is there is any function module or BAPI available for calculating closing stock & openign stock of
material that should be match with MB5B transaction.
Thanks & Regards,
Anagha Deshmukh

Hi Anagha,
Did you get any solution for this ?
If you do please let me know becaues I am also having the same rquirement.
Thanks,
kalikonda.

Customer support html (html service) - how can i query for 'closed' SRs

hi,
11.5.10.2
in customer support html (html service - CSZ), is there any facility to query for SRs that are in 'closed' status?
currently, a SR in 'closed' status can only be queried if agent knows the exact SR number. on Advanced Search page, even though the application allows 'closed' status to be selected, it does not return any record.
help is appreciated, as this is critical to our business.
regards.

You can search for Closed SRs. Ensure that the search criteria 'Active' is set to 'No'. This will return back closed SRs.
Who is the customer? Can you provide some more details on the implementation? (you can send me an email to [email protected])
Thanks.
Edited by: dejoseph on Mar 31, 2010 12:00 PM

Query for Opening Stock + Purchase Qty + Sales Qty

Hi ,
Can anyboday help me by how to develop a query for the following requirement. If any custom query is available please provide me .We are working on SBO 2007B PL 8. The required report structure is
ItemNo ***OpeningStock**** Purchase ********* Sales****
(Batchwise)** Qty*** Value ****Qty** Value ***Qty***Value
Thanks & Regards
Srini

Hi Srini,
I found this on the forum, see if it helps you;
select b.Itemcode,b.Item_Description,b.UOM, b.rate as Rate,b.Opening_Stock,b.Receipt,b.Issue, b.Material_Revalue,b.Closing_Stock,b.Closing_Value from (select *,(case closing_stock when 0 then 0 else(Closing_Value/Closing_Stock)end) as Rate from( SELECT T0.Itemcode as 'Itemcode' ,min(T0.Dscription) as 'Item_Description', max(T1.InvntryUom) as UOM, (isnull((Select sum(isnull(inqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate<'[%0]' and O1.transtype in (58,59,20,16,67,-2)),0) - isnull((Select sum(isnull(outqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate<'[%0]' and O1.transtype in (58,21,19,60,15,67,-2,13)),0)+ (isnull((Select sum(isnull(inqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate>='[%0]' and O1.docdate<='[%1]' and O1.transtype in (-2)),0) - isnull((Select sum(isnull(outqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate>='[%0]' and O1.docdate<='[%1]' and O1.transtype in (-2)),0)))as Opening_Stock, (isnull((Select sum(isnull(inqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate>='[%0]' and O1.docdate<='[%1]' and O1.inqty>0 and O1.transtype in (20,18)),0) + isnull((Select sum(isnull(inqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate>='[%0]' and O1.docdate<='[%1]' and O1.inqty>0 and O1.transtype in (67)),0) + isnull((Select sum(isnull(inqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate>='[%0]' and O1.docdate<='[%1]' and O1.inqty>0 and O1.transtype in (58,59,16,14)),0)) as Receipt, (isnull((Select sum(isnull(outqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate>='[%0]' and O1.docdate<='[%1]' and O1.outqty>0 and O1.transtype in (13,15)),0) + isnull((Select sum(isnull(outqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate>='[%0]' and O1.docdate<='[%1]' and O1.outqty>0 and O1.transtype in (67)),0)+ isnull((Select sum(isnull(outqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate>='[%0]' and O1.docdate<='[%1]' and O1.outqty>0 and O1.transtype in (58,60,21,19)),0)) as Issue, isnull((select sum(Transvalue) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate<='[%1]' and O1.transtype in (162)),0) as Material_Revalue, (isnull((Select sum(isnull(inqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate<='[%1]' and O1.transtype in (58,59,20,16,14,19,67,-2)),0) - isnull((Select sum(isnull(outqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate<='[%1]' and O1.transtype in (58,21,19,60,15,67,-2,13)),0))as Closing_Stock, isnull((select sum(Transvalue) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate<='[%1]' and O1.transtype in (58,18,-2,67,59,20,16,14,15,13,21,19,60,69,162)),0) as Closing_Value FROM OINM T0 INNER JOIN OITM T1 ON T0.ItemCode = T1.ItemCode INNER JOIN OITW T2 ON T1.ItemCode = T2.ItemCode INNER JOIN OITB B1 ON T1.ItmsGrpCod=B1.ItmsGrpCod where ((B1.ItmsGrpNam>='[%2]' and B1.ItmsGrpNam<='[%3]') or ('[%2]'='' and '[%3]'='')) GROUP BY T1.itemcode,T0.Itemcode )a Where (a.Opening_Stock + a.Receipt + a.Issue + a.Material_Revalue + a.Closing_Stock + a.Closing_Value) <> 0 )b
Thanks,
Joseph

Tables / tcodes for closing stock of everyday

Dear Experts,
from which tables (if i get tables name it would be more useful) / transaction can i get the closing stock of everyday?
Kind Regards
Sajid

Sir,
Pl use following tables
Material Stock Balances MARD Material stock
MBEW Material stock with Valuations

Query for BOM Stock

Hi Experts,
I need a report in which i hit BOM Code and it returns BOM + Child Item Inventory Status.
i.e.
BOM Code = ABC
Child Code = A, B, C
When I select ABC in selection criteria then I can able to see BOM Code(ABC) + Child codes(A, B, C) inventory status.
Any help will be appreciated.
Regards,
Ravi

Hi Ravi,
try this:
Declare @Item As Nvarchar(20)
Set @Item = (Select MAX(Code) from OITT I0 Where I0.Code = '[%0]')
Select
T1.Father as [Parent Code],
(Select MAX(ItemName) from OITM Where ItemCode=T1.Father ) [Parent Name],
T1.Code Child,
(Select MAX(ItemName) from OITM Where ItemCode=T1.Code ) [Child Name],
(Select Sum(onHand) from OITM Where ItemCode=T1.Code) [OnHand Qty]
from ITT1 T1, OITT T0
Where
T0.Code = T1.Father and
T0.Code=@Item For Browse
Thanks,
Neetu

How to fire a query for every record in a table, pass values in a loop

Hi,
For each record in a table, I want to loop through each record and then fire a query by passing acct, product and date from this table to the where clause of the query. I would have to create a pl/sql block..The output of the query I want to spool from sql developer.
I need the exact syntax please for doing this.. since i am new to Oracle. Just the template will be enough. I will fill in the query.
Any help is appreciated as always..
Regards,
hena

904385 wrote:
Hi,
For each record in a table, I want to loop through each record and then fire a query by passing acct, product and date from this table to the where clause of the query. I would have to create a pl/sql block..The output of the query I want to spool from sql developer.
I need the exact syntax please for doing this.. since i am new to Oracle. Just the template will be enough. I will fill in the query.
Any help is appreciated as always..
Regards,
henaHave you ever considered using a JOIN ? It does the same thing as looping through a table and applying that to the where clause of a select on a query, only much, much, much faster and without the need to write any code. SQL is a declarative language, so you specify what you want and not how to do it. It can be bit of a journey to change your thought process if you come from a procedural or object world, but once you get there it's a beautiful view.

Query for one row of each distinct column value

lets say theres table employee with columns name, id, and title. How do you get one row for each distinct title. Whatever row it is doesnt matter as long as your result set covers every possible employee title. How can I do this? thanks

Hi,
I think you're asking about a Top-N Query .
Since you didn't post a version of your table, I'll use scott.emp to illustrate.
The following query shows exactly one row of output for each distinct job:
WITH        got_r_num         AS
     SELECT     empno, ename, job
     ,     ROW_NUMBER () OVER ( PARTITION BY job
                               ORDER BY         ename
                             ) AS r_num
     FROM    scott.emp
SELECT     empno, ename, job
FROM     got_r_num
WHERE     r_num     = 1
;Output:
`    EMPNO ENAME      JOB
      7902 FORD       ANALYST
      7876 ADAMS      CLERK
      7698 BLAKE      MANAGER
      7839 KING       PRESIDENT
      7499 ALLEN      SALESMANThe rows you see are actual rows from the table, not aggregates. That is, you can be certain that there is a row in the table with empno=7902, ename='FORD' and job='ANALYST'.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only), and also post the results you want from that data.
If the desired results are not unique, that is, if you'd be equally satisfied with a number of different result sets, then post a couple of examples from the same sample data.

How to search for a text node with a particular value in an xml document with labview

supposing i have the following xml document:
<head>
<book>
<bookname>zio</bookname>
<author>dan</author>
</book>
<book>
<bookname>the spear warrior</bookname>
<author>britney</author>
</book>
<book>
<bookname>the beard</bookname>
<author>derrick</author>
</book>
</head>
i want to search for the author of the book "the beard" using for example the V.I Get first match of labview to access the the node with value "the beard" and then use Get next sibling V.I and Get node text content to get get the author of this book..so my question is how do i write the xpath expression for Get first match so as to access the node with bookname "the beard" instantyly? am trying to minimise the use of loops because they increase the time duration,..thank you (NB:i dont want to use Get all Matched V.I because it obliges me to use a loop in order to access the name derrick and this increases the time duration for my v.i)
Solved!
Go to Solution.

Since it's all text, why not use a real quick Match Pattern (or Regular Expression, but you don't need that much power here), see attached.
Cameron
To err is human, but to really foul it up requires a computer.
The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
Profanity is the one language all programmers know best.
An expert is someone who has made all the possible mistakes.
To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
LabVIEW Unit 1 - Getting Started
Learn to Use LabVIEW with MyDAQ
Attachments:
Two-stage match demo.vi ‏8 KB

Closing Stock on Particular Date(MB5B Tcode)

Hi Experts,
I need closing stock as on some particular date. For e.g. closing stock as on 28.02.2014.
In my requirement i have to use that closing stock value for further calculations in a new customized report.I can see closing stock value by using MB5B tcode.
Please suggest some way to get closing stock as on some date so that i can use that in my Report.
Can i directly call MB5B transaction in my Report and get closing stock value?
Thanks & Regards,
Pankaj

Hello Pankaj,
In your Customised Report use MKPF and MSEG table
MKPF -----> Material and date range as the input
Then Pass Material document number from MKPF to MSEG table
MSEG -----> based on material document number from mkpf
Create Temporary variable
values comes from the mseg where have credit and debit entries
if debit entry "S" then subtract the values of the Mseg table from the temporary variable1
if credit entry "H" then Add the values of the mseg table to the temporary variable2
finally Add the temporary variable1 and temporary variable 2 and get the total stock.

Closing Stock of a particular date:Function Module

Hello Experts,
I m developig a report in which I want Closing Stock amount of a particular date.
Is there any funtion module for this, as in tables S031, mard I m getting Closing Stock as on date.
Pls suggest
Priyanka

Hi Priyanka,
I didnt find any function module for this purpose.
You can create your FM for this purpose.
You can refer following thread for the reference:
Re: closing stock of a particular date
Closing Stock of a Material
Re: Stock on a particulare date
Hope this will help.
Regards,
Nitin.

Closing Stock Query

Hi Members,
We Want a report for closing stock according to the following parameters,
1-Date from
2-Date to
3-Warehouse
4-Document Series
Query Report should contain with,
Item Code - Item Description - Inventory UOM - Quantity - Item cost(FIFO Value) - Value
(Inventory Audit Report can not use with document Series)
Thank You
Saman

Hi Rahul,
thank you for reply. You are correct. but in our company we use only 10 document series. under this 10 series all type of
documents are available . so when we select a one series it is containing all of SAP B1 document type.
Example-
Series A- (Delivery , GRN, Return, A/P invoice,A/R Invoice, Payment .....ect)
Series B- (Delivery , GRN, Return, A/P invoice,A/R Invoice, Payment .....ect)
Series C- (Delivery , GRN, Return, A/P invoice,A/R Invoice, Paymet .....ect)
So Results of this Query will be a meaning full One.
Can You Suggest a Query for my requirement. I Hope Your Idea.
Saman

Query for Closing Stock goes beyond a particular value.

Similar Messages

Maybe you are looking for