Query for exact item name for CAL required

Hi,
We are e-businessoft, reseller for Microsoft softwares.
One of the customer has recently purchased windows server and now wants to purchase some user CALs. Few users will do mstsc of WinServer from within the
premises and few customers will do the mstsc from remote location, a different city. Remote user will login via internet connection into the LAN and then do mstsc
of WinServer.
Please tell me exactly what products has to be purchased to facilitate this. I have suggested the below:
1. WinSvrCAL 2012 SNGL OLP NL UsrCAL
2. WinRmtDsktpSrvcsCAL 2012 SNGL OLP NL UsrCAL
If this is correct, then please guide on how exactly this works? For example, The user doing mstsc from within premises requires item 1 only and users doing mstsc
from different city requires item 2 only, or both 1 and 2 is required in both case.
The terminal server services gives a countdown of 120 days from date of installation and ultimately expires and all connections thru mstsc stops. And then the
server is reinstalled. So one major concern is whether purchase of these CALs will stop this inconvinience for ever?
Please reply asap. CAL requirement is very urgent but can not proceed unless this clarity comes from you.

Hi,
Resellers should contact MSFT Partner Support for assistance.
In general, the scenario you describe requires both Windows Server CAL and also RDS CAL for each user/device.
This is because an RDS/TS CAL is required for correctly licensed use of RDS/TS, and in addition, because RDS/TS is used to gain access to Windows Server services/features, a Windows Server CAL is also required.
(there are different scenarios which may apply, depending upon the edition of Windows Server being used, and also, it may be less expensive, depending on the size/scale of the scenario, to instead consider CAL Suite options)
(also, note that if the Windows Server is offering MS Office, that requires Office licensing to be addressed. Also consider if the RDS/TS will allow the users/devices to consume MS Exchange or MS SharePoint or MS SQL, additional CALs for those products may
be required)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

  • Unable to find Database Item Name for Employee Category at assignment level

    Hi,
    What is the database item name for employee category at assignment level.
    I want to call employee category colomn of assignment level in fast formula.
    Thanks in advance...

    It seems that there are no seeded database items available for employee category, the only other option is to write a plsql function at the database level which will return the employee category for a given assignment_id & effective dates. Link this plsql function to a Fast formula function. You can use the newly created fast formula function in your fast formula.
    Regards,
    Senthil

  • What is the exact file name for Adobe Photoshop Elements application?

    what is the exact file name for Adobe Photoshop Elements application?
    I jsut downn laoded it and the alias does not work. in the  support folder I have an application titled Adobe photoshop Elements Editor and it lauches ok but when I got to import a photo it only asks for a frame from  a video.

    You do not import anything to the editor. You just open things there using File>Open. Import is only for frame from video and for scanning if your scanner is compatible and you install the PSE twain plug-in.
    If you wish to use PSE to keep track of your photos, launch Adobe Elements 11 Organizer instead of the editor.

  • Quality inspection for the items issued for Sales order

    Hi, How to map the qc for the items issued for sales order?

    Dear Yadav,
    -Activate insp type 10 in the Material Master-QM view insp setup (MM01)
    -Create Inspection plan (QP01) with usage as Goods issue & assign Insp characteristics
    -Create Sales order (VA01)
    -Delivery against the Sales order (VL01N) or through sales order menu. Delivery Insp lot gets created after Delivery is made.
    -Do results recording and take usage decision (QA32)
    Note:
    -This inspection is non stock relevant inspection. There will be no stock posting through Quality Management.
    -Post Goods issue in the delivery can be made only after taking the usage decision.
    Regards,
    Keerthi.

  • Additional fields for line item display for Vendor Accounts

    Hi,
    The additional fields for line item display have been defined for the vendor accounts. I am able to see the additional fields in SAP 4.7 system but not in ECC 6.0.
    Could you help me to know how the same will be displayed in ECC 6.0 system.
    Thanks

    In SPRO, Vendor Accounts -> Line Items -> Display Line Items -> Define Additional fields for Line item display, the fields for Check number from (PAYR-CHECF) and Tax Jurisdiction (BSEG-TXJCD) have been defined.
    When I am executing Vendor Line Item display (FBL1N), I am not able to select these fields for defining a layout. Could you please let me know, how I will get these fields in FBL1N.
    Thanks

  • Get old item name for renamed files using TFS API

    My current tfs will be retired in next few months.I am using tfs api to create a parallel tfs on a new server from the existing one. I have folders and solutions that have been renamed. I am iterating items and based on their changetype(add, edit, delete,
    sourcerename etc), I am checking them in destination tfs.
    I am not able to get Old filename for a file, in order to use PendRename when the item that is being iterated is Delete|SourceRename or Rename.
    I tried the mentioned solution :
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/f9c7e7b4-b05f-4d3e-b8ea-cfbd316ef737/how-to-get-previous-path-of-renamedmoved-of-file-using-tfs-api?forum=tfsgeneral
    But, my changeset has a lot of changes and hence identifying a particular file seems difficult.
    Do we have something that interraltes two items (the deleted and renamed) ones other than the changeset, because there needs to be a uniquely identifier that associated the two items so that they may appear together in TFS history?

    Hi Fabcoder,
    As Daniel mentioned, you can migrate source control files and work items to the new TFS server by using TFS integration tools.
    If the new server has the complete history, then you can view the history of the specific file to check the pervious path. Or you can do a compare between the project in new TFS where the file located with the matched project in current TFS to check
    the differences.
    Best regards, 
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • SQL query to see table names for specific columns

    hi
    i have a database containing more than 100 tables. I want to see all the tables containg a column 'Employee_id'. plz tell me SQL query some other way.
    Thanks

    Time to learn data dictionary basics
    SELECT DISTINCT table_name
    FROM all_tab_cols
    WHERE column_name ='EMPLOYEE_ID';

  • Suggestion for a new name for this place

    Using the term "Support" in Apple Support Communities makes people think they have Apple's ear here.
    ("This is the support website, right? My Mac Plus crashed after I installed all of Unsanity's Haxies. C'mon Apple!")
    And lots of people aren't providing support or receiving support, anyway (e.g., this post). In fact lots of people are just blowing off steam or ranting and raving in some form or another.
    Why not just call this joint: "Apple Communities"?
    Yes, I embrace the irony in making this suggestion to the non-Apple audience.  But feel free to trash me anyway.
    charlie

    Thanks for the Don Martin props. Glad to see someone recognized it. One of these days I'll get around to giving myself a present of the two volume "Completely Mad Don Martin." Too bad, I completely missed Captain Klutz. I don't think I was aware of Mad or Don Martin very much after the early '60's. I had all the fifties Mads, which my mother, in a fit of cleanliness, threw out when I went away to college. If I had them now, I could afford to buy that two volume set in a beat.
    His characters are absolutely wonderful. I think the ony one who comes anywhere now to expressing that complete sense of lostness, derangement (the body gone totally awry) and befuddlement is Roz Chast in the New Yorker. (See the Ungooglable Man, below.) But Don Martin is still the gold standard in that department.
    (I like your suggestons for names. Maybe we can use them all.)

  • BADI For Commitment Item Change for Service PO

    Hi All,
    I want to change the commitment item in the PR on change of Material Group . I used the BADI ME_PROCESS_REQ_CUST for changing the commitment item and its working fine for all types of PR except Service PR .
    In service PR , its changing the commitment item only on clicking the Account Assigment button because at this instant only the BADI is getting trigger .
    I want to change the commitment item without clicking the Account Assigment button (on pressing enter or at saving time ) .
    Is there any way ?
    Thanks
    Manik L Dhakate

    We are using User Exit MEREQ  EXIT_SAPLMEREQ_010
    In our PR creation for ME51n, we are validating the Person through HR Org structure at the Point of Key in his Cost Center, whether he belong to his Department cost center, we use this User Exit MEREQ  EXIT_SAPLMEREQ_010. If he doesnu2019t not belong, the message pop up as u201C Please use your department cost centeru201D. This works very good in case of NB Document Type (Non stock & Materials).
    We have customized ZCPR (Service PRs), but for service PRs, the place where we enter Account Assignment is Different screen, either it is planned or unplanned service, the system take you to another separate screen to key in Cost Center & GL, here the validation is not happening,
    Please suggest & advice us, we tried in this BADI : ME_PROCESS_REQ_CUST, we can fix it. Any User Exit or BADI for Service PRu2019

  • Table for line item relevancy for due list

    Hi all
    i have taken the list of orders from VF04 ,but is there any table where i can check which line item is relavant for Due list for each order?
    Regars
    Phani

    hi Rhani,
    that would be the billing index VKDFS.
    Balazs

  • Searching for script form name for tcode j1ip

    dear friends,
    I have to change one code in form.but i am unable to find the form name that is used in j1ip tcode.
    can you tell me the way to find it out?is there any table in which if i will enter tcode or program name it will give the form name.
    regards
    ansuman

    TNAPR is one table, where ur driver program and form names are mapped to the output types, but this is not applicable only when output is called through message control (TCODE -NACE).
    but there is one structure RSTXC, in which u get ur form name in TDFORM.
    this is updated in write_form FM so in debugging u can mark a "breakpoint at fm" on write_form and hit execute and when u reach inside the fm u can check this structure.
    i dont think u'll get a table where u'll get this info directly.
    кu03B1ятu03B9к

  • No sound for some items, sound for others

    my powerbook can play sound in terms of a DVD or CD or MP3, but cannot play sounds (ends up muted) embedded on webpages or in a video game.
    suggestions?

    pixelinpink,
    No sound from some applications, but system alert sounds play (Mac OS X 10.3, 10.4) may be helpful.
    ;~)

  • Query to get batch GLBATCH name for the invoices of AP and AR

    Please provide a query to get GLBatch name for an invoice of AR and AR.
    From one cursor iam getting invoice number and invoiceID of AP and AR.
    I have written query but it is taking much time
    select distinct gjb.NAME
    from gl_je_headers gjh,
    gl_je_lines gjl,
    gl_je_batches gjb
    where gjl.REFERENCE_2=to_char(:p_invoiceid)
    and gjh.JE_HEADER_ID=gjl.JE_HEADER_ID
    and gjh.JE_BATCH_ID=gjb.JE_BATCH_ID
    so iam getting performance problem.
    Please suggest if iam wrong.
    Waiting for your valuable suggestion.
    Thanks
    ganesh

    Hi,
    the version of Oracle E-Business Suite is R12
    and ORacle Database IS 11I
    Thanks & Regards
    ganesh

  • Actual Column Name for Index when Function is used?

    Hi,
    We have some indeces where the column in oracle is actually a function in the form UPPER('column-name'). When I query user_ind_columns I get something like SYS_NC0012$ for the column name. Where would I be able to actually query the actual column it's using in the index? So that I can query the exact column name if need be. Don't ask why cause this is a developer asking me this and they are doing some sort of a comparison between indexes between two application.
    Here is the SQL for the Index and the Table associated with it
    create table BATCH_HEADER2
    PAYMENT_TYPE VARCHAR2(17),
    BATCH_TYPE VARCHAR2(40) not null,
    BATCHNUM NUMBER not null,
    BRANCH VARCHAR2(16),
    BATCH_TIME NUMBER,
    USER_LOB VARCHAR2(16),
    PAYEE_TYPE VARCHAR2(40),
    PROGRESS_RECID NUMBER,
    CHEQUE_TYPE VARCHAR2(60),
    SCANNERBATCHNO NUMBER,
    RECEIPTCOUNT NUMBER
    alter table BATCH_HEADER2
    add constraint PK_BATCH_HEADER2 primary key (BATCH_TYPE, BATCHNUM)
    using index
    tablespace FT1_DATA;
    --Inxes
    create unique index FT1DSTINT.BATCH_HEADER2##BYNUM on FT1DSTINT.BATCH_HEADER2 (UPPER(BATCH_TYPE), BATCHNUM)
    tablespace FT1_DATA
    pctfree 10
    initrans 2
    maxtrans 255
    storage (initial 64K
    minextents 1
    maxextents unlimited);

    From Oracle's standpoint, though, it isn't indexing BATCH_TYPE. It's indexing an arbitrary function that happens to take BATCH_TYPE as an input. As far as Oracle is concerned, you might just as easily be indexing an expression that took a dozen column names as parameters, so it doesn't really make sense for Oracle to try to break down anything beyond the function.
    Of course, you could always parse the expression and extract the column name, but I would be dubious that's the right answer... If a developer is comparing indexes between columns, there is a heck of a lot of difference between an index on BATCH_TYPE, and index on UPPER(BATCH_TYPE) and an index on SOME_OTHER_FUNCTION( BATCH_TYPE ).
    Justin

  • How To create Library Functions for Validate Items

    Hi all,
    My form Consists data block blk_user with two items
    username and password
    Both user name and Password are required Fields.
    When user left these items Empty To show Alert
    I Created Below Procedure and Called in Form_Level ON-ERROR Trigger.
    PROCEDURE pcd_io_alert IS
         itm_name VARCHAR2(20);
    BEGIN
         IF Error_type ='FRM' AND Error_code = 40202 THEN
         Message(get_item_property(NAME_IN('SYSTEM.CURSOR_item'), PROMPT_TEXT )||' Should
    Not Be Empty');
         SET_ALERT_PROPERTY('ALT_IO',ALERT_MESSAGE_TEXT,
              (get_item_property(NAME_IN('SYSTEM.CURSOR_item'), PROMPT_TEXT ))||' Should Not
    Be Empty');
         itm_name := Show_alert('ALT_IO');               
    RAISE FORM_TRIGGER_FAILURE;
         END IF;
    END;
    It working fine.
    Could You Tell how to call or create this procedure as Library functions and call the created library in form To SHow Alert. Actually I want to create library functions to Validate and Show Alert Mesages.
    Regards
    R.MaheshBabu.

    Hello,
    Could you give Some examples or links related to how To create and call library functions For validate Items..For creation you already created one procedure and you called on error. So for creation and call it is clear. Now you are talking about validation for items. It depends on your requirement. As you check validation in items's triggers you can also check validation in function/procedure of library. You can use parameter to pass values and check the validations. And you can create the procedure/function in library like this...
    PROCEDURE My_Proc(Parameter_Name IN DATATYPE) IS
      Variables Declarations...
    BEGIN
      -- Here check the validation on the passed value.
    EXCEPTION
      -- Exception Handling part...
    END;
    FUNCTION My_Proc(Parameter_Name IN DATATYPE) RETURN DATATYPE IS
      Variables Declarations...
    BEGIN
      -- Here check the validation on the passed value.
      RETURN <ANY VALUE>;
    EXCEPTION
      -- Exception Handling part...
    END;
    Is it Possible to use system variable ':system.cursor_value' while creating PL/sql library functions?Yes, because it is clear as you used for CURRENT_ITEM like NAME_IN('SYSTEM.CURSOR_item') so you can use SYSTEM VARIABLES.
    -Ammad

Maybe you are looking for