Query gives ASSIGN_TYPE_CONFLICT error while execution.

Hi,
I am using BEX 3.5 and I get the following error when I excecute a query built on a virtual provider.
Runtime Errors         ASSIGN_TYPE_CONFLICT
Date and Time          04.02.2009 07:26:14
Short text
     Type conflict with ASSIGN in program "GP46IJU3DHHM7BMOVYK5C25VPU9".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "GP46IJU3DHHM7BMOVYK5C25VPU9" had to be terminated
      because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
    You attempted to assign a field to a typed field symbol,
    but the field does not have the required type.
Information on where terminated
    Termination occurred in the ABAP program "GP46IJU3DHHM7BMOVYK5C25VPU9" - in
     "EXECUTE".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 345
    of the (Include) program "GP46IJU3DHHM7BMOVYK5C25VPU9".
Line SourceCde
315     currrule-tranid = '0AUBIMFV5RTEC7OMK4S551BJENDOPH2N'.
316     currrule-progid = '46IJU3DHHM7BMOVYK5C25VPU9'.
317     currrule-version = '0'.
318
319     call method cl_rstran_runtime_exe=>get_suppressed_rules
320       EXPORTING
321         i_tranid             = currrule-tranid
322         i_r_data             = e_r_outbound
323       IMPORTING
324         e_s_suppressed_rules = lssupp.
325
326 *   set attributs
327     p_check_master_data_exist = i_master_data_exist.
328     p_r_request               = i_r_request.
329
330
331 * ==== Debugging ====
332 * Breakpoint after start routine
333     if i_r_trfn_cmd is bound.
334       READ TABLE i_r_trfn_cmd->n_th_bp
335            TRANSPORTING NO FIELDS
336            WITH TABLE KEY bpid    = 3
337                           datapid = i_r_inbound->n_datapakid.
338       IF sy-subrc = 0.
339         BREAK-POINT.                                       "#EC NOBREAK
340       ENDIF.
341     endif.
342
343 * ==== 2. process data package
344     i_r_log->add_substep( 'RULES' ).
>>>>     LOOP AT <_yt_SC_1> assigning <_ys_SC_1>.
346
347       CLEAR:
348         G1,
349         ltmsg_rec,
350         ltmsg.
351       currrule-record = l_recno_SC_1 = <_ys_SC_1>-record.
352       TRY.
353           CALL METHOD i_r_log->verify_record
354             EXPORTING
355               i_segid         = 0001
356               i_record        = <_ys_SC_1>-record
357             RECEIVING
358               r_skip          = _skip
359             EXCEPTIONS
360               TOO_MANY_ERRORS = 1
361               NOT_IN_CROSSTAB = 2
362               others          = 3.
363           IF sy-subrc <> 0.
364             CALL FUNCTION 'RS_SYMESSAGE_TO_EXCEPTION'
Please can someone help me with this?

Hi Anil,
I am facing same Runtime error in ST22.
Can you help me out with solution.
Thanks n Regards.
Chetna

Similar Messages

Error while execution of BPEL processes in IPM Solution

Hi All,
I am working on the IPM Imaging solution in which Invoice data is captured from OFR in XML format , pushed into IPM and then BPEL process is invoked to push the data into apps tables.
I am facing following error while invoking a procedure which is in apps schema from BPEL by giving it parameters.
actually this procedure/function will accept the payloads as parameters and will give some output parameters, but while processing i am getting following error :
Non Recoverable System Fault :
Exception occurred when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'PreImportCleanup' failed due to: Parse struct conversion error. An error occurred while parsing XML representing a Java struct. Unable to convert the XSD element P_INVOICE_REC whose user defined
type is AXF.AXF_PREIMPORT_CUSTOM_PKG_R_IN to a Java struct.
Cause: java.sql.SQLSyntaxErrorException: ORA-04044: procedure, function, package, or type is not allowed here ".
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
Any suggestion to get over this issue will be so helpful !
Thanks & Regards,
Nupur

Hi Nupur,
We had requirement for automating invoice processing, came to know we need to use ODC/ODDC,OFR,OIPM 11g and SOA 11g with EBS.
My questions are:
1. do we need OFR for this.
2. if so how to configure OFR with OIPM
3. do we need to use imaging solution in OIPM for invoice processing and not managed attaachements
4. whts the flow is it frm EBS to OIPM or OIPM to EBS(populate invoice) or viceversa
5. can we do invoice processing automated without AXF solution.
Thanks a lot in Advance,
Ra.

Reporting error while execution of query in BI?

hi friends,
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=Q001_SALES&VARIABLE_SCREEN=X&DUMMY=1
when i am executing my query in 7.0 i am getting 1 extra window with this message. ple let me know solution for this.
regards
suneel.

hi banu,
whether i need look here bex analyzer or query designer, if i open bex analyzer its showing only 3.x reporting, when i am usnig query designer its showing 7.x reporting, i know reporting well in 3.5 .
i am using there bex analyzer?
here in BI what can i use? analyzer or query designer?
if i need analyzer why its showing only 3.x reporting.
if i need 7.x reporting what can i do for my system?
and also help me that new data to activae data for dso for my demo version wher can i check my oss nores.
regards
suneel.

Query timedout expired error while removing PRIV from a Role in IDM

I am trying to remove a PRIV from a role and i am getting Query timeour error.
I tried removing this PRIV from workflow and there it takes some time to process and then i get a promt of error which is staying for a sec and then i get to home page.
I also tried removing this PRIV from Identity center and there I get error window like this:
Method: Save Identity Store Privilege
Source: Microsoft SQL Native Client
Error: 80040E31h (-2147217871)
Description: Query timedout expired.
this is the error i am getting when i try.
This is very critical role assigned to many users.
Please check this and let me know if you need any more information to understand and give a solution.
FYI: I am on SAP Netwearver 7.0 version.
This role is assigned to almost 1150 users in the system.
Since, I dint see anyone giving answer for this, may be this helps to analyse the solution for this.
Edited by: ARUN KUMAR AKUTHOTA on Apr 28, 2010 3:33 PM

Dear Sabita,
Any update if this has been fixed in SP13 or SP14. We are planning to upgrade to SP13.
We are unable to do even provisioning in multiple systems. Only in 1 system role is getting provisioned and other system its not happening. Same situation for removal of roles also.
Also, we have not upgraded the ABAP patches in A2D system to synch with GRC SP9, whereas in R1D the patches are in synch with GRC SP9. But the issue is happening with R1D system (patches are in Synch) and not in A2D system.
Thanks and Best Regards,
Srihari.K

Flashback query gives an error

We're on version 10.1.0.4, having upgraded from 10.1.0.3, and Flashback Query stopped working:
SQL> create table test_flashback (d date);
Table created.
SQL> begin
2    for i in 1 .. 10
3    loop
4      insert into test_flashback values (sysdate);
5      commit;
6      dbms_lock.sleep(60);
7    end loop;
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> select * from test_flashback;
D
12-FEB-09
12-FEB-09
12-FEB-09
12-FEB-09
12-FEB-09
12-FEB-09
12-FEB-09
12-FEB-09
12-FEB-09
12-FEB-09
10 rows selected.
SQL> alter table test_flashback enable row movement;
Table altered.
SQL> select * from test_flashback AS OF TIMESTAMP
2     TO_TIMESTAMP('2009-02-12 08:29:00', 'YYYY-MM-DD HH:MI:SS');
select * from test_flashback AS OF TIMESTAMP
ERROR at line 1:
ORA-00600: internal error code, arguments: [kdsgrp1], [], [], [], [], [], [], []I looked through METALINK, & while this particular error isn't listed, it does mention that there was a reported problem with using Flashback and "AS OF TIMESTAMP". The solution was to use Flashback with an SCN.
So, my question is, how do you know which SCN is associated with that particular time frame? When someone says, I dropped a record about an hour ago, could you get it back for me ... how do I get the SCN for "about an hour ago"?
Thanks,
Chuck

Oracle maintains a mapping of SCNs to timestamps with a granularity of a few seconds (the exact number depends on the Oracle release-- I believe in 10.2 it's +/- 3 seconds) automatically, and uses this map to find the closest SCN to the timestamp you specify. That map should be maintained (again automatically) far longer than your 25 hour window.
If you need something that goes back months or years, it may make sense to save that data off into your own table.
Justin

Query throws an error while drilldowning a particular column in production

Hello Gurus,
There is an issue in a query when I run it on portal and when I try to drill down one particular column, it throws an error. I am pasting the error message below for your reference. This query works fine when I run in Bex. It also works fine when I run it on Quality portal. It only throws an error when I run it on production portal. I have got the patches and PI checked with BASIS team, everything seems to be fine.
Please help me out with this issue.
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: System error in program SAPLRRK0 and form LRECH_01-01- (see long text)
Regards,

Hi,
There are a couple of threads on the same issue.
Refer to these, just might be handy.
Re: Uncaught_exception in Report Designer
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION in Report
Good Luck!
Sandeep Tudumu

Error while execution in background

Hi all
when iam using file download function , it is working fine in foreground but giving
error dump while executing in background
plz reply , its urgent

Hi Check this link it will solves ur problem...
http://www.sap-img.com/ab004.htm
<b>i am pasting the same information below......</b>
GUI_* WS_* Function In Background, CSV Upload
GUI_* and WS_* function modules do not work in background
When scheduling a job in the background the appropriate statement to read in your file is OPEN DATASET, and the file must be on the file system that the SAP server can see.
At anytime, a user can switch of the Personal Computers even though the job is still running in the background. Therefore GUI_* and WS_* function modules are not designed to work in that way, as they need to access your personal computer file.
To choose the correct download method to used, you can check the value of SY-BATCH in your code,
if it is 'X' use OPEN DATASET and if it is ' ' use WS_UPLOAD.
*-- Open dataset for reading
DATA:
dsn(20) VALUE '/usr/test.dat',
rec(80).
OPEN DATASET dsn FOR INPUT IN TEXT MODE.
IF sy-subrc = 0.
DO.
    READ DATASET dsn INTO rec.
    IF sy-subrc <> 0.
      EXIT.
    ELSE.
      WRITE / rec.
    ENDIF.
ENDDO.
ENDIF.
CLOSE DATASET dsn.
*-- Open dataset for writing
DATA rec(80).
OPEN DATASET dsn FOR OUTPUT IN TEXT MODE.
TRANSFER rec TO '/usr/test.dat'.
CLOSE DATASET dsn.
What is the difference when we use upload, ws_upload, gui_upload function modules?
UPLOAD, WS_UPLOAD, GUI_UPLOAD, are used in BDC concepts. ie., Batch Data Communication.
Batch Data Conversion is a concept where user can transfer the Data from non SAP to SAP R/3. So , in these various Function Modules are used.
UPLOAD--- upload a file to the presentation server (PC)
WS_UPLOAD----    Load Files from the Presentation Server to Internal ABAP Tables.
WS means Work Station.
This is used upto SAP 4.6 version.
GUI_UPLOAD-------    Replaces WS_UPLOAD. Upoad file from presentation server to the app server. From 4.7 SAP version it is replaced.
How to Upload csv file to SAP?
Common File Download Upload Questions:
How you upload the data from text file to sap internal table? From my knowledge its by upload or gui_upload.
How you download the data from sap internal table to text file?
How you upload the data from xls (excel) file to sap internal table how you download the data from sap internal table to xls(excel) file.
You can upload data from presentation server to an internal table using gui_upload. Use gui_download to download from internal table to flat file.
Use fm ALSM_EXCEL_TO_INTERNAL_TABLE to upload data frm excel.
Use function module GUI_UPLOAD
The FILETYPE refer to the type of file format you need: For e.g 'WK1' - Excel format , 'ASC' - Text Format etc.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\test.csv'
   FILETYPE                      = 'ASC'
TABLES
    DATA_TAB                      = itab
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17.
Ramesh

Application works in UAT but gives an error while deploying in Production m

Error occured while deploying MYApp.ear on production domain. but the same is working fine in UAT below error occured...
<Apr 12, 2010 3:55:50 PM IST> <Error> <Deployer> <BEA-149205> <Failed to initial
ize the application 'MYApp' due to error java.lang.NoClassDefFoundError: org/sax
path/SAXPathException.
java.lang.NoClassDefFoundError: org/saxpath/SAXPathException
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:2259)
at java.lang.Class.getDeclaredFields(Class.java:1715)
at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAn
notationProcessor.java:867)
at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAn
notationProcessor.java:860)
Truncated. see log file for complete stacktrace
java.lang.NoClassDefFoundError: org/saxpath/SAXPathException
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:2259)
at java.lang.Class.getDeclaredFields(Class.java:1715)
at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAn
notationProcessor.java:867)
<Apr 12, 2010 3:33:51 PM IST> <Warning> <Deployer> <BEA-149004> <Failures were d
etected while initiating start task for application 'MYApp'.>
<Apr 24, 2010 3:48:51 PM IST> <Warning> <Deployer> <BEA-149078> <Stack trace for
message 149004
java.lang.NoClassDefFoundError: org/saxpath/SAXPathException
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:2259)
at java.lang.Class.getDeclaredFields(Class.java:1715)
at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAn
notationProcessor.java:867)
at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAn
notationProcessor.java:860)
Truncated. see log file for complete stacktrace
java.lang

Hi,
It looks like your Production Environment doesnt have ANY of the following Jars in Either the Server Classpath or in <DOMAIN_HOME>\lib directory.
dom4j.jar
Or
jaxen.jar
Or
saxpath.jar
Please add these Jars in the ServerClasspath ... or in <DOMAIN_HOME>\lib directory.
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

Issue in ESS i.e. gives dump error while availing a leave through ESS

Hi All,
In My client place, system gives a dump error when employee is maintaining its leave in ESS system.Here TM is not integrated with payroll.
Plz help me how to resolve the issue.

com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUsage.java:348)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java:245)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:862)
     at com.sap.pcuigp.xssfpm.java.MessageManager.handleException(MessageManager.java:259)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:104)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModelInternal(BackendConnections.java:323)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.initBackend(BackendConnections.java:256)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModel(BackendConnections.java:154)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.connectModel(InternalBackendConnections.java:237)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.connectModel(FPMComponent.java:842)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.connectModel(FPMComponent.java:1072)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.init(BackendConnections.java:141)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.init(InternalBackendConnections.java:233)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:182)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:782)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:302)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:761)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:696)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1344)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:593)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:865)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:712)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

Error while execution report in background

Hi,
I am uploading the data from excel file using ALSM_EXCEL_TO_INTERNAL_TABLE function module in one of the report. If I execute the report in background its giving a error message 'Error during import of clipboard contents'.
Please help me out what should be the problem.
<REMOVED BY MODERATOR>
Thanks,
Vinay.
Edited by: Alvaro Tejada Galindo on Feb 21, 2008 11:20 AM

When a program is executed in background, the programs runs in the application server and so connection exists with the PC.
And the FM ALSM_EXCEL_TO_INTERNAL_TABLE reads the file from PC. Since the connection is already lost when the program is run in background, the program will not work and might give a short dump.
So you might have to upload the file into application server and then use OPEN DATASET, READ DATASET commands to read data from the application server file.
<REMOVED BY MODERATOR>
Thanks,
Balaji
Edited by: Alvaro Tejada Galindo on Feb 21, 2008 11:21 AM

Error while execution

Hi,
I am using Oracle 10G DB.
I am having one .sql file to do some Insert-Select , Update, and delete of the same table.... and i gave the commit after execution of that file .
It worked fine in our development database but when i execute the same in testing DB it thrown its completed successfully and when it comes to Commit "ORA- 03114 : not connected to oracle " and rollback all the new record insertion /updation and deletion ....
I have tried with commit after Insert-SELECT, Update and delete that time also when it comes to that commit its throwing the error ....
Same code is working fine in our development DB.....
Can any one help me to solve this .....................

Hi,
The count value is coming properly with out commit ... if i ad the commit it is throwing the error ....
any suggestion from any body
My code is looking like
Accept the dblink :
create or replace procedure proc1
is
begin
delete from table a
delete from table b
insert into table a select .... from table_a@dblink;
insert into table b select .... from table_a@dblink;
exception
end;
begin
proc1;
end;
commit;
If i comment this commit then i got procedure successfully completed .... if the commit it there then its end of communication chanel error is coming .....
I have tried with select count(*) from tablea after the execution its printing correctly .....
This code working fine with some server with commit and its throwing error in some servers ... no idea where is the problem is ...
any suggestion for me ....
Edited by: KBG on Mar 10, 2009 5:19 AM

Error while execution of Background step

HI all,
I have created a smart form attachment step.The step to be executed in Background.
According step is set syncronous with background execution.
However i am getting folllowing error-
The information displayed is -Execution will continue in backgroun with Status-Error
Error details are as follows-
Message Text         Error handling for work item 000000389208
Exception            630
Error Type           0
Area                 SWF_RUN
Message              630
Variable 1           000000389208
Please guide to resolve issue.

Hi Sanjay,
As Rick Suggested check the log, if still problem persists & if possible try making the step to dialog execution and check?
Regards,
Narin.

Webdynpro Program Error while Execution

Hi Experts,
Iam new to Webdypro Programing. The Pb is While Executing Web Dyn Pro Program the Broswer gets open, after authentication i am getting error.
Error is due to : The termination type was: RABAX_STATE
And second time Execute Same program, in this time directly going to error , not even asking authentication aslo....
this is error display when broswer open .
Error Message
The URL http://ecc6:8001/sap/bc/webdynpro/sap/zinfy_dynpro_bok was not called due to an error.
Note
The following error text was processed in the system I01 : Die URL enthält keine vollständige Domainangabe (ecc6 statt ecc6.<domain>.<ext>).
The error occurred on the application server ecc6_I01_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: STARTUP_CHECKS of program CL_WDR_UCF====================CP
Method: CONSTRUCTOR of program CL_WDR_UCF====================CP
Method: CREATE of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Error code: ICF-IE-http -c: 800 -u: ABAP -l: E -s: IDS -i: hufinsar_IDS_00 -w: 0 -d: 20090707 -t: 132441 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION

Hi Just put a breakpoint at WRITE src to dest+off(len) index i statement and check what values are getting populated.
This errror arises when you try to access offset length more than what is actually there .
Jus debug and see . If unable to solve reply with the values populated

Javascript gives an error while added externally or within the script tag

I have included a Javascript that will return the id of the current element that I am accessing , i am using this script along with the jsf tags.
The code looks like this :
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://myfaces.apache.org/tomahawk" prefix="t"%>
<html>
<head>
<script language="Javascript">
function focus_id()
alert(this.id);
</script>
</head>
<f:subview id="task-tree">
<t:div style="width:170px; height:500px; overflow:auto;">
<t:tree2
   ... >
   <f:facet name="root-facet">
      <h:panelGroup>
         <t:graphicImage alt="#{msgs.openFolderAlt}" value="/images/dtree/folderopen.gif" rendered="#{t.nodeExpanded}" border="0"/>
         <t:graphicImage alt="#{msgs.folderAlt}"value="/images/dtree/folder.gif" rendered="#{!t.nodeExpanded}" border="0"/>
         <h:outputText value="#{node.description}" styleClass="nodeFolder"/>
      </h:panelGroup>
   </f:facet>
   <f:facet name="node-facet">
      <h:panelGroup>
         <t:graphicImage alt="#{msgs.openFolderAlt}" value="/images/dtree/folderopen.gif" rendered="#{t.nodeExpanded}" border="0"/>
         <t:graphicImage alt="#{msgs.folderAlt}" value="/images/dtree/folder.gif" rendered="#{!t.nodeExpanded}" border="0"/>
         <h:outputText value="#{node.description}" styleClass="nodeFolder"/>
      </h:panelGroup>
   </f:facet>
   <f:facet name="node-with-action-facet">
      <h:panelGroup>
         <t:graphicImage alt="#{msgs.openFolderAlt}" value="/images/dtree/folderopen.gif" rendered="#{t.nodeExpanded}" border="0"/>
         <t:graphicImage alt="#{msgs.folderAlt}" value="/images/dtree/folder.gif" rendered="#{!t.nodeExpanded}" border="0"/>
         <h:commandLink
            immediate="true"
            actionListener="#{t.setNodeSelected}"
            action="#{node.doAction}"
            styleClass="#{t.nodeSelected ? 'rowHighlighted' : 'document'}"
            onclick="focus_id();" >
            <h:outputText value="#{node.label}"/>
         </h:commandLink>
      </h:panelGroup>
   </f:facet>
   <f:facet name="leaf-facet">
      <h:panelGroup>
         <h:commandLink
            immediate="true"
            actionListener="#{t.setNodeSelected}"
            action="#{node.doAction}"
            styleClass="#{t.nodeSelected ? 'rowHighlighted' : 'document'}"
            onclick="focus_id();" >
            <h:outputText value="#{node.label}"/>
         </h:commandLink>
      </h:panelGroup>
   </f:facet>
</t:tree2>
</t:div>
</f:subview>
</html>This code works fine and returns the element id if included inline but not
otherwise .... Any clues that you can give me as to why this happens will be great ...

Problem was solved.
It was some of illegial symbols at the beginning of xml.

Time Out Error while execution of messages

Hello All,
Our Env. is XI 3.0 , and this is related to PRD system,
This problem is relating to an Outbound service. This particular message gets executed in some times and in some cases it throws Time out Exception .
This is the following log which is from Audit log of that message :
Audit Log for Message: 2949b051-ae64-11dc-87b9-001560ad9210
Status     Description
Success     RFC adapter received sRFC for Z_UCRM_FM029_RFC_INT_SERASA from CP1/130. Attempting to send message synchronously
Success     Application attempting to send an XI message synchronously using connection AFW.
Success     Trying to put the message into the call queue.
Success     Message successfully put into the queue.
Success     The message was successfully retrieved from the call queue.
Success     The message status set to DLNG.
Error     Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Timeout.
Error     Transmitting the message using connection http://xp0ci01:8080/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Timeout.
Error     The message status set to FAIL.
Error     Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Timeout
Here CP1/130 is the CRM system which is sender in this case , and XP0 is xi production system.
Can any one help me out to fix this issue, and if any parameter value need to be adjusted...?
Best Regards
Rakesh Reddy

Hello All,
Thanks for the update,
I have checked the mentioned Blog and the oss notes mentioned in it..
I have compared all the parameters specified in it , and which seems to be fine as per recomended.
HTTP_TIMEOUT   -30000
syncMessageDeliveryTimeoutMsec --300000
xiadapter.inbound.timeout.default -180000
Few points which I am having doubt :
1>
When I login to SMICM of that system , I can find the error content in most areas and no clue about it..
[Thr 1077967200] Wed Dec 26 17:29:19 2007
[Thr 1077967200] *** WARNING => IcmReadFromConn: AppServer context already released [icxxthrio_mt 2452]
[Thr 1077967200] *** ERROR => IcmHandleNetRead(id=7/22059): IcmReadFromConn failed (rc = -1) [icxxthrio_mt 1257]
[Thr 1077967200] *** ERROR => IcmConnRollInWP: AppServer context already released [icxxthr_mt.c 2339]
2>
And when checked in trace file of dev_server0 , i can see some error messages relating to rfc logon load(SMLG) , but I have checked in SMLG and load balancing is defined over there and the status is also green.
Now one small doubt is , any way this error is relating to the existing problem ..
[Thr 1093638496] Thu Dec 27 12:09:18 2007
[Thr 1093638496] *** ERROR => JRFC> Error jrfc_lg LgGroup failed(-6) [jrfc_mt.c    707]
[Thr 1093638496] *** ERROR =>       mshost: ashb01wa06pr, msserv: sapmsXP0, r_group: PUBLIC [jrfc_mt.c    708]
3>Is my only few outbound services messages getting failed showing the reason as "Timeout error 500 " due to inconsistency in SMICM .(as outbound services uses ICM services to connect external part)..
4>And the reason for failing only some messages is due to heavy load( at same time many messages are getting executed) ?
Can any one help me to fix this issue ...
Best Regards
Rakesh Reddy

Query gives ASSIGN_TYPE_CONFLICT error while execution.

Similar Messages

Maybe you are looking for