Query giving run time error.

Hi BW Experts,
Here goes my question :
There is a query which is giving runtime error as time limit exceeded. This query is based on an infoset which is based on 4 ODS's.
Is there any way we can do performance tuning for this query?
Many Thanks in advance,
Sudip.

Hi Ganesh,
Thanks for your help.
Can you please tell me which option to select for the infoset query as i'm seeing a lot of options on the left hand side of the screen like master Data, Transaction data, ODS objects,PSA tables etc for the RSRV transaction?
Also to add-on from my first post...this particular query is executing for an hour after which the error message comes an "System Failue, Time limit exceeded".
Regards,
Sudip.

Similar Messages

  • BEx Query designer : Run-time error '457'

    Hey,
    We installed the standard query's for HR.  When we try to change the query 'Average age of employees', and we try to restrict on 'Calender year/month' then we receive this error. 
    Run-time error '457' : This key is already associated with an element of this collection.
    We're using version 3.50.
    I already saw oss note 517232 but that was for version 2.0 and not intresting for my case...  Anybody any idea? 
    Kind regards,
    Tom
    PS : I also saw : https://forums.sdn.sap.com/click.jspa?searchID=1049118&messageID=1649858 & https://forums.sdn.sap.com/click.jspa?searchID=1049118&messageID=2243413

    Hi,
    Check this conditions as I haven't checked the queries ......make sure that these two conditions are not getting into picture after you make the changes to the query.
    1) When we are making restricted key figures we can’t use same variable to restrict to two different Characteristics in the same RKF.
    2)Once a Variable used to restrict a characteristic in one RKF you cannot use it to restrict it other characteristic in other key figures i.e.  You can use it to restrict that particular characteristic only in other key figures.
    Hope it helps
    Thanks

  • ALV GRID Display function module giving Run time error

    Hello Experts,
    I have ALV report, In which I am using ALV grid dispaly FM to display the report.
    But when my out table which I am passing to FM is empty that time ALV grid display shows blank ALV report. but when out table is not empty that time  I am getting the Run time error, which shows message "Field symbol has not yet been assigned".
    Can any one please help me out in this.
    Thanks

    TYPES: BEGIN OF type_out,
            col00    TYPE   ytlet-rzzyyproduct,
            col01    TYPE   ytlet-kslvt,
            col02    TYPE   ytlet-kslvt,
            col03    TYPE   ytlet-kslvt,
            col04    TYPE   ytlet-kslvt,
            col05    TYPE   ytlet-kslvt,
            col06    TYPE   ytlet-kslvt,
            col07    TYPE   ytlet-kslvt,
            col08    TYPE   ytlet-kslvt,
            col09    TYPE   ytlet-kslvt,
            col10    TYPE   ytlet-kslvt,
            col11    TYPE   ytlet-kslvt,
            col12    TYPE   ytlet-kslvt,
            col13    TYPE   ytlet-kslvt,
            col14    TYPE   ytlet-kslvt,
            col15    TYPE   ytlet-kslvt,
            col16    TYPE   ytlet-kslvt,
            col17    TYPE   ytlet-kslvt,
            col18    TYPE   ytlet-kslvt,
            col19    TYPE   ytlet-kslvt,
            col20    TYPE   ytlet-kslvt,
            col21    TYPE   ytlet-kslvt,
            col22    TYPE   ytlet-kslvt,
            col23    TYPE   ytlet-kslvt,
            col24    TYPE   ytlet-kslvt,
            col25    TYPE   ytlet-kslvt,
            col26    TYPE   ytlet-kslvt,
            col27    TYPE   ytlet-kslvt,
            col28    TYPE   ytlet-kslvt,
            col29    TYPE   ytlet-kslvt,
            col30    TYPE   ytlet-kslvt,
            col31    TYPE   ytlet-kslvt,
            col32    TYPE   ytlet-kslvt,
            col33    TYPE   ytlet-kslvt,
            col34    TYPE   ytlet-kslvt,
            col35    TYPE   ytlet-kslvt,
            col36    TYPE   ytlet-kslvt,
            col37    TYPE   ytlet-kslvt,
            col38    TYPE   ytlet-kslvt,
            col39    TYPE   ytlet-kslvt,
            col40    TYPE   ytlet-kslvt,
            col41    TYPE   ytlet-kslvt,
            col42    TYPE   ytlet-kslvt,
            col43    TYPE   ytlet-kslvt,
            col44    TYPE   ytlet-kslvt,
          END OF type_out.
    DATA: t_fieldcat   TYPE slis_t_fieldcat_alv,   "Field catelog table
          w_fieldcat   TYPE slis_fieldcat_alv,     "Field catelog Work area
          w_layout     TYPE slis_layout_alv,       "Layout structure
          w_event      TYPE slis_alv_event,        "Event structure
          t_event      TYPE slis_t_event,          "Event structure
          t_sort       TYPE STANDARD TABLE OF slis_sortinfo_alv,
          t_callback_main_user_command  TYPE  slis_formname,
          v_selfield TYPE slis_selfield.
    FIELD-SYMBOLS: <ksl>.
    FORM DISPLAY_REPORT .
    *Prepare Field Catlog
      PERFORM  creat_field_catlog.
    *Set layout
      PERFORM  set_layout.
    *Get Event
      PERFORM get_event.
    *Display Report
      PERFORM display_alv_report.
    ENDFORM.                    " DISPLAY_REPORT
    FORM creat_field_catlog .
      PERFORM add_fields_catlog USING:
           '01'    'RZZYYPRODUCT'     'IT_OUT'    'MPMs' ' ',
           '02'    'KSLVT'     'IT_OUT'    'License Fee' ' ',
           '03'    'KSLVT'     'IT_OUT'    'Ad Sales' ' ',
           '04'    'KSLVT'     'IT_OUT'    'Promo Fees' ' ',
           '05'    'KSLVT'     'IT_OUT'    'Total Ad Sales/Promo' ' ',
           '06'    'KSLVT'     'IT_OUT'    'Other' ' ',
           '07'    'KSLVT'     'IT_OUT'    'Total' ' ',
           '08'    'KSLVT'     'IT_OUT'    'Dom Station' ' ',
           '09'    'KSLVT'     'IT_OUT'    'Basic Cable/Free VOD' ' ',
           '10'    'KSLVT'     'IT_OUT'    'License Fee' ' ',
           '11'    'KSLVT'     'IT_OUT'    'Ad Sales (incl Internet)' ' ',
           '12'    'KSLVT'     'IT_OUT'    'Promo Fees' ' ',
           '13'    'KSLVT'     'IT_OUT'    'Ad Sales & Promo Fees' ' ',
           '14'    'KSLVT'     'IT_OUT'    'Foreign' ' ',
           '15'    'KSLVT'     'IT_OUT'    'Pay TV' ' ',
           '16'    'KSLVT'     'IT_OUT'    'Other' ' ',
           '17'    'KSLVT'     'IT_OUT'    'Total' ' ',
           '18'    'KSLVT'     'IT_OUT'    'Home Entertainment' ' ',
           '19'    'KSLVT'     'IT_OUT'    'SPTI' ' ',
           '20'    'KSLVT'     'IT_OUT'    'All Other Divisions' ' ',
           '21'    'KSLVT'     'IT_OUT'    'Total' ' ',
           '22'    'KSLVT'     'IT_OUT'    'Total Revenue' ' ',
           '23'    'KSLVT'     'IT_OUT'  'PV Net Down & Producers Share' '',
           '24'    'KSLVT'     'IT_OUT'    'Total Net Revenue' ' ',
           '25'    'KSLVT'     'IT_OUT'    'Development Expense' ' ',
           '26'    'KSLVT'     'IT_OUT'    'SOP Deficits' ' ',
           '27'    'KSLVT'     'IT_OUT'    'Amortization' ' ',
           '28'    'KSLVT'     'IT_OUT'    'Other COS ' ' ',
           '29'    'KSLVT'     'IT_OUT'    'Total COS' ' ',
           '30'    'KSLVT'     'IT_OUT'    'Profit Before Releasing' ' ',
           '31'    'KSLVT'     'IT_OUT'    'Gross Profit %' ' ',
           '32'    'KSLVT'     'IT_OUT'    'SPT' ' ',
           '33'    'KSLVT'     'IT_OUT'    'Home Entertainment' ' ',
           '34'    'KSLVT'     'IT_OUT'    'SPTI' ' ',
           '35'    'KSLVT'     'IT_OUT'    'All Other Divisions' ' ',
           '36'    'KSLVT'     'IT_OUT'    'Other' ' ',
           '37'    'KSLVT'     'IT_OUT'    'Total' ' ',
           '38'    'KSLVT'     'IT_OUT'    'Gross Profit' ' ',
           '39'    'KSLVT'     'IT_OUT'    'SPT' ' ',
           '40'    'KSLVT'     'IT_OUT'    'Home Entertainment' ' ',
           '41'    'KSLVT'     'IT_OUT'    'SPTI' ' ',
           '42'    'KSLVT'     'IT_OUT'    'All Other Divisions' ' ',
           '43'    'KSLVT'     'IT_OUT'    'Other' ' ',
           '44'    'KSLVT'     'IT_OUT'    'Total' ' ',
           '45'    'KSLVT'     'IT_OUT'    'Net Margin' ' '.
    ENDFORM.                    " CREAT_FIELD_CATLOG
    *&      Form  ADD_FIELDS_CATLOG
          Filling of field Catlog
    FORM add_fields_catlog  USING    p_colpos
                                     p_fildname
                                     p_tabname
                                     p_fildtext
                                     p_ndisplay.
      w_fieldcat-row_pos       = '1'.
      w_fieldcat-col_pos       = p_colpos.
      w_fieldcat-fieldname     = p_fildname.
      w_fieldcat-tabname       = p_tabname.
      w_fieldcat-reptext_ddic  = p_fildtext.
      w_fieldcat-no_out        = p_ndisplay.
      APPEND w_fieldcat TO t_fieldcat.
      CLEAR: w_fieldcat.
    ENDFORM.                    " ADD_FIELDS_CATLOG
    *&      Form  SET_LAYOUT
          Set Layout
    FORM set_layout .
      w_layout-colwidth_optimize = 'X'.
    ENDFORM.                    " SET_LAYOUT
    *&      Form  GET_EVENT
          text
    FORM get_event .
      w_event-name = 'TOP-OF-PAGE'.
      w_event-form = 'F_TOP-OF_PAGE'.
      APPEND w_event TO t_event.
    ENDFORM.                    " GET_EVENT
    *&      Form  TOP-OF-PAGE
          Top of Page
    FORM top-of-page.
      DATA : t_list_commentry   TYPE slis_t_listheader,
               w_header           TYPE slis_listheader,
               lv_text(90)        TYPE c,
               l_text(90)         TYPE c,
               lv_rundate(10)     TYPE c,
               lv_runtime(10)     TYPE c.
      CONSTANTS: c_space(2) TYPE c VALUE '  ',
                 c_space2(6) TYPE c VALUE '      '.
      w_header-typ  = 'S'.
      w_header-key  = 'Program:'.
      w_header-info = sy-repid.
      APPEND w_header TO t_list_commentry.
      WRITE: sy-datum TO lv_rundate MM/DD/YYYY.
      WRITE: sy-uzeit TO lv_runtime USING EDIT MASK '__:__:__'.
    CLEAR w_header.
    w_header-typ  = 'S'.
    w_header-key  = text-021.
    w_header-info = lv_rundate.
    APPEND w_header TO t_list_commentry.
      CLEAR: w_header.
      w_header-typ  = 'S'.
      w_header-key  = 'User Id'.
      w_header-info = sy-uname.
      APPEND w_header TO t_list_commentry.
      CLEAR: w_header.
      w_header-typ  = 'S'.
      w_header-key  = 'Run Date'.
      w_header-info = lv_rundate.
      APPEND w_header TO t_list_commentry.
      CLEAR: w_header.
      w_header-typ  = 'S'.
      w_header-key  = 'Run Time'.
      w_header-info = lv_runtime.
      APPEND w_header TO t_list_commentry.
      CLEAR: w_header.
      w_header-typ  = 'H'.
      w_header-key  = 'order'.
      w_header-info = 'MCR Report'.
      APPEND w_header TO t_list_commentry.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary = t_list_commentry.
    ENDFORM.                    "TOP-OF-PAGE
    FORM display_alv_report .
      CONSTANTS : gc_save TYPE c VALUE 'A'. "Save Layout
    t_callback_main_user_command  = c_user_command.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
      I_INTERFACE_CHECK                 = ' '
      I_BYPASSING_BUFFER                = ' '
      I_BUFFER_ACTIVE                   = ' '
         i_callback_program                = sy-repid
      I_CALLBACK_PF_STATUS_SET          = ' '
        i_callback_user_command           = t_callback_main_user_command
         i_callback_top_of_page            = 'TOP-OF-PAGE'
      I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
      I_CALLBACK_HTML_END_OF_LIST       = ' '
      I_STRUCTURE_NAME                  =
      I_BACKGROUND_ID                   = ' '
      I_GRID_TITLE                      =
      I_GRID_SETTINGS                   =
         is_layout                         = w_layout
         it_fieldcat                       = t_fieldcat
      IT_EXCLUDING                      =
      IT_SPECIAL_GROUPS                 =
      IT_SORT                           =
      IT_FILTER                         =
      IS_SEL_HIDE                       =
      I_DEFAULT                         = 'X'
         i_save                            = gc_save
      IS_VARIANT                        =
      IT_EVENTS                         =
      IT_EVENT_EXIT                     =
      IS_PRINT                          =
      IS_REPREP_ID                      =
      I_SCREEN_START_COLUMN             = 0
      I_SCREEN_START_LINE               = 0
      I_SCREEN_END_COLUMN               = 0
      I_SCREEN_END_LINE                 = 0
      I_HTML_HEIGHT_TOP                 = 0
      I_HTML_HEIGHT_END                 = 0
      IT_ALV_GRAPHICS                   =
      IT_HYPERLINK                      =
      IT_ADD_FIELDCAT                   =
      IT_EXCEPT_QINFO                   =
      IR_SALV_FULLSCREEN_ADAPTER        =
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER           =
      ES_EXIT_CAUSED_BY_USER            =
        TABLES
          t_outtab                          = it_out
    EXCEPTIONS
      PROGRAM_ERROR                     = 1
      OTHERS                            = 2
       ENDIF.

  • ZSAPMV45A copy of sapmv45A giving run time error

    Hi ABAPERs
    I copied standard program sapmv45A (trx va31) to zsapmv45A to make few changes according to user requirement. I copied all screens as well as includes . Now when I execute this zprogram it gives me a run time error : The current ABAP program "SAPMV45A" had to be terminated because it has                      
    come across a statement that unfortunately cannot be executed.          
    Error analysis                                                                               
    The system attempted to use dynpro 0000 in program "SAPMV45A".                                |
    This dynpro does not exist.     
    Help me
    Thanks in advance

    Hi
    I don't think it was a good idea to copy that program.
    All screens to be called are managed centrally (see fm SCREEN_SEQUENCE_CONTROL), the setting is done by transaction VFBS.
    So I can suppose the setting still calls the screen of SAPMV45A.
    Also you should considere if you're in release ecc 6.00 you can risk to lose all standard enhancement of SAPMV45A, because they assigned to the program, so they can't be copied in a new program.
    So probably the best solution is to create an implicit enhancement or (if you can't do it) to change the standard program.
    Max

  • ALV grid list giving run time error

    hi
       after lot of struggle , i over come by previous issue .
    but now another is coming . i.e.
    my ALV is displaying in GRID  fine . But when i am selecting a column and doing SUMMATION (Icon) . it is giving runtime error.
    same if i am clicking on PRINT PREVIEW of LIST
    please guide me.

    my ALV is displaying in GRID fine . But when i am selecting a column and doing SUMMATION (Icon) . it is giving runtime error.
    same if i am clicking on PRINT PREVIEW of LIST
    from the above issue i can see that you populated the fieldcatalog wrong . some where you made the mistake.
    fieldcat-fieldname = 'VBELN'.  "this should be caps
    fieldcat-tablename = 'IT_VBAK'. "provide the table also if you are not.
    post your field catalog part, there we can see the mistake.

  • While processing MB51 Transation system is giving run time Error.

    Dear MM Team,
    While processing T code MB51 system getting data, if i clicking detail list in MB51 system has given below dump message. 
    A RAISE statement in the program "CL_GUI_ALV_GRID===============CP" raised the
    exception
    condition "NO_VALID_DOCUMENT".
    Kindly suggest me how to rectify the above problem.
    Regards
    Venkey.

    Dear All,
    Thanks for your prompt support, this issue have been resolved by SAP.
    Regards
    Venkat

  • Run time error while closing the CRM Order using BAPI

    Hi Experts,
    Need your invaluable suggestions here.Apologies for the lengthy mail, intention is to give clear idea of the issue.
    I am facing an issue while closing the CRM orders. According to our business process, when an issue is solved we will keep the order in resolved status only. We will not directly close the order from the CRM tool, instead we have created a custom program for the same purpose.
    For the custom program we will give input as the order number and execute it, this will close the order.
    Here close the order means assigning it to Close status as well assign the reason code.
    We have created some reason codes for closed status.
    So when the program is run the Order moves from resolved status to closed status along with reason code.
    But of late we are facing some problems with this program, it is giving run time error for some CRM orders.
    Run time error message : The ABAP/4 Open SQL array insert results in duplicate database records.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught in procedure "CRM_SERVICE_OS_UPD_OST_DU" "(FUNCTION)", nor was it propagated by a RAISING clause.
    Please find my code which have used in the custom program
    Closing the resolved SOs in the system
        CALL FUNCTION 'CRM_STATUS_CHANGE_EXTERN_OW'
            EXPORTING
              objnr                     = iv_guid
              user_status          = lc_status_closed
           EXCEPTIONS
             object_not_found          = 1
             status_inconsistent       = 2
             status_not_allowed       = 3
             OTHERS                        = 4.
        IF sy-subrc <> 0.
          WRITE :  'Error at maintaining status'.
        ENDIF.
    Set reason code
    build lt_subject
        ls_subject-ref_guid = iv_guid.
        ls_subject-katalogart = 'A2'.
        ls_subject-codegruppe = 'ZR000003'.
        ls_subject-code       = 'ZR33'.                      " Reason code
        ls_subject-mode       = 'A'.
        APPEND ls_subject TO lt_subject.
    build lt_ossset
        ls_osset-ref_guid        = iv_guid.
        ls_osset-subject_profile = 'ZREASON03'.
        ls_osset-profile_type    = 'G'.
        ls_osset-subject         = lt_subject.
        APPEND ls_osset TO lt_osset.
    build lt_service_os
        ls_service_os-ref_guid  = iv_guid.
        ls_service_os-ref_kind  = 'A'.
        ls_service_os-osset     = lt_osset.
        APPEND ls_service_os TO lt_service_os.
    build lt_input_fields
        REFRESH: lt_input_fields, lt_field_names.
        CLEAR  : ls_input_fields, ls_field_names.
        ls_field_names-fieldname    = 'CODE'.
        APPEND ls_field_names TO lt_field_names.
        ls_field_names-fieldname    = 'CODEGRUPPE'.
        APPEND ls_field_names TO lt_field_names.
        ls_field_names-fieldname    = 'KATALOGART'.
        APPEND ls_field_names TO lt_field_names.
        ls_field_names-fieldname    = 'SERVICE_PROFILE'.
        APPEND ls_field_names TO lt_field_names.
        ls_input_fields-ref_guid    = iv_guid.
        ls_input_fields-ref_kind    = 'A'.
        ls_input_fields-objectname  = 'SERVICE_OS'.
        ls_input_fields-field_names = lt_field_names.
        APPEND ls_input_fields TO lt_input_fields.
         CALL FUNCTION 'CRM_ORDER_MAINTAIN'
          EXPORTING
            it_service_os     = lt_service_os
          CHANGING
            ct_input_fields   = lt_input_fields
          EXCEPTIONS
            error_occurred    = 1
            document_locked   = 2
            no_change_allowed = 3
            no_authority      = 4
            OTHERS            = 5.
        IF sy-subrc <> 0.
          WRITE :  'Error at maintaining reason'.
        ENDIF.
        CALL FUNCTION 'CRM_ORDER_SAVE'
          EXPORTING
            it_objects_to_save   = lt_header_guid
            iv_update_task_local = lv_update_task_local
          IMPORTING
            et_saved_objects     = lt_saved_objects
          EXCEPTIONS
            document_not_saved   = 1
            OTHERS               = 2.
        IF sy-subrc <> 0.
          WRITE : 'Error at saving'.
        ELSE.
          WRITE : 'Successfully Closed'.
          COMMIT WORK AND WAIT.
        ENDIF.
    Run time error is coming at COMMIT WORK AND WAIT statement.
    Please let me know any corrections are required in the above program.
    When I analyzed the run time error I have found that it trying to insert the record in CRMD_SRV_OSSET for that CRM order, but already one record is present in the table for the same CRM order number.
    For most of the CRM orders there is no entry in this table so they are closing successfully but for a few orders for which there is an entry we are getting the above run time error.
    There is nothing wrong with the orders which have an entry already in the table CRMD_SRV_OSSET, I need to close these kind of orders with out run time error.
    Kindly provide your feedback.

    Hi Dinakar,
    You posted this in APO PPDS forum. This question should go to PP forum where someone could answer it.
    Please close this thread and open a new thread in PP forum so that you could get help quickly from the relevant experts.
    Regards - Pawan

  • Run time error while activating the Transfer Rules

    Hi,
    Error when activating Transfer rules for Infosource :
    0FI_GL_1 -
    (General ledger: Transaction figures)
    Run time error : ASSERTION FAILED
    Transfer rules traffic light is in Green. But when i am trying to activate the Transfer rules, its giving Run time error.
    Thanks,
    Kishore

    Hi,
    As mentioned in the note 939383 , either Import Support Package 08 for SAP NetWeaver 2004s BI (BI Patch08 or SAPKW70008) into your BI system or do correction instructions given in the note.
    It is always better to import the latest patches avialble in service market to avoid this type of problems.
    Also see tha note 1010672 amd check whether it is applicable to your problem.
    With rgds,
    Anil Kumar Sharma .P
    Message was edited by:
            Anil Kumar Sharma

  • Run-time error in S_ALR_87013611

    Hi,
    Recently we have just upgraded to ECC6.0. One of the reports S_ALR_87013611 is giving run-time errors (unable to set linestyle property) when downloading to Excel using office integration option. We are using Excel 2003 SP3. Surprisingly, this report works on some PC but not on others. All the PCs are setup the same way and using the same application version.
    Please help. Thank you.

    Hello
    Run again S_ALR_8703611
    -> Error displayed
    -> Type SU53 in the dialogue box
    -> New screen appears
    -> Take a screen shot
    -> Send to BASIS for analysis
    They should fix this. Looks like some authorisation issue.
    Also, check for OSS notes
    Reg
    Suresh

  • Run time Error 457

    Hi,
    We upgraded to BI 7.0, after upgrade the query is executing fine but while restricting a time characteristic the query throws an error "Run Time Error 457, this key is already associated with an element of this collection". This happens only in the production server, the query is working fine on development and test servers. When i try to access the variable associated with the time characteristic thru query designer the query designer window gets blocked displaying the same above message. I guess the error is related to Visual Basic of MS Office.
    Please let me know  the procedure for resolving the issue.
    Thank you

    Hi,
    Check SAP Note - 517232.
    Also check the below thread:
    BEx Query designer : Run-time error '457'
    Hope these helps u...
    Regards,
    KK.

  • Run time error with ALV List

    Hi,
    I am Using ALV list to display data,In that when itry to display currency field it is giving run time error.
    Following is the code i am using
      lf_fcat-fieldname   = 'SALARYE'.
      lf_fcat-tabname     = 'IT_EMPLOYEE'.
      lf_fcat-col_pos     = l_cnt.
      lf_fcat-emphasize   = 'X'.
      lf_fcat-outputlen   = 15.
      lf_fcat-ref_tabname = 'PA0008'. "<--- Ref table
      lf_fcat-ref_fieldname = 'ANCUR'. "<-----ref field
      lf_fcat-decimals_out = 2.
      lf_fcat-seltext_l   = text-061.
      append lf_fcat to it_fcat.
      clear  lf_fcat.

    Hi,
    Please check in the internal table 'IT_EMPLOYEE' , the relevant currency field as it should type compatible with your reference table field.
    Thanks,
    Dhruv Kumar Malhotra

  • Unable to Create Query - Run Time Error

    Hi All,
    I'm try to create a query from a Cube .... the moment I drag 0CALMONTH and restrict it to Varaible Last Year This Month. I receive, the following error "Run Time Error 2147417848 (80010108) ....Automation Error. The Object Invoked has disconnected from its client.
    When I check with Event Viewer : The following message appear " ID: 1, Application Name: Microsoft Office Excel, Application Version: 12.0.6324.5001, Microsoft Office Version: 12.0.6215.1000. This session lasted 1784 seconds with 780 seconds of active time.  This session ended with a crash."
    I'm running Ms Vista Enterprise OS with Office 2007.
    Please advise
    TQ
    Nathan

    Hi,
         Actually this is a frontend error.
    Check the SAP Note Number: 1039191
    Download the DLL.
    Problem Description: There is a BI bug when we use BW3.5 frontend tool with BI7 datawarehouse workbench.
    Symptoms: When you try to restrict an object in Query designer, it will greayed out by giving runtime error.
    Solution: Take a backup of wdbspres.dll file which is present under C:\Program Files\SAP\FrontEnd\SAPgui. Copy the original
    file with this new file available in project filder. Problem will be resolved.
    Regards
    Karthik

  • Run-Time error '-2147417848 (80010108) in Crystal Report on SAP BW Query

    I have installed Crystal Report 2008 SP1 and the Business Objects Integration kit for 3.1 but when I try to create a report on top of an SAP BW query using the toolbar, after entering the logon parameters for SAP BW, I get a error message :
    Run-Time error '-2147417848 (80010108)
    Automation error
    The object invoked has disconnected from its clients.
    CR exits after this error message.
    I have tried uninstalling the Kit and CR, cleaning up the registry, and installing it again and still got this error message - It is the same for all my SAP BWs.
    Anyone ever had this?
    Thank you,
    R.

    Is this still an issue?

  • RUN Time error while use filter table in query generator

    Hai..
                   I have 2 Functions under "Scalar valued functions" in SQL Server,i try to call this functions in Query generator its working fine,result also display correctly, but i click filter table system showing  Error Message " Run Time Error,Abnormal program termination" then SAP is get closed,i tested this scenario in 3 Database am getting same error , Is this BUG in SAP B1?There is no error number in error message

    This is my function
    set ANSI_NULLS ON
    set QUOTED_IDENTIFIER ON
    go
    -- =============================================
    -- Author:          <Author,,Name>
    -- Create date: <Create Date, ,>
    -- Description:     <Description, ,>
    -- =============================================
    ALTER function [dbo].[Get_TransObjName](@Obj_type NUMERIC(20,5))
    returns varchar(500) as
    BEGIN
    DECLARE @Obj_type_Name varchar(100)
    select @Obj_type_Name =
    case @Obj_type
    when     -2     then     'Opening Balance'
    when     -3     then     'Closing Balance'
    when     1     then     'oChartOfAccounts'
    when     2     then     'oBusinessPartners'
    when     3     then     'oBanks'
    when     4     then     'oItems'
    when     5     then     'oVatGroups'
    when     6     then     'oPriceLists'
    when     7     then     'oSpecialPrices'
    when     8     then     'oItemProperties'
    when     12     then     'oUsers'
    when     13     then     'A/R Invoices'
    when     14     then     'A/R Credit Memo'
    when     15     then     'A/R DeliveryNotes'
    when     16     then     'A/R Returns'
    when     17     then     'oOrders'
    when     18     then     'A/P Invoice'
    when     19     then     'A/P Credit Memo'
    when     20     then     'Goods Receipt PO'
    when     21     then     'Goods Returns'
    when     22     then     'PurchaseOrders'
    when     23     then     'Quotations'
    when     24     then     'IncomingPayments'
    when     25     then     'Deposit'
    when     28     then     'oJournalVouchers'
    when     30     then     'JournalEntries'
    when     31     then     'oStockTakings'
    when     33     then     'oContacts'
    when     36     then     'oCreditCards'
    when     37     then     'oCurrencyCodes'
    when     40     then     'oPaymentTermsTypes'
    when     42     then     'oBankPages'
    when     43     then     'oManufacturers'
    when     46     then     'VendorPayments'
    when     48     then     'oLandedCostsCodes'
    when     49     then     'oShippingTypes'
    when     50     then     'oLengthMeasures'
    when     51     then     'oWeightMeasures'
    when     52     then     'oItemGroups'
    when     53     then     'oSalesPersons'
    when     56     then     'oCustomsGroups'
    when     57     then     'ChecksforPayment'
    when     58     then     'Stock List'
    when     59     then     'Goods Receipt'
    when     60     then     'Goods Issue'
    when     64     then     'oWarehouses'
    when     65     then     'oCommissionGroups'
    when     66     then     'oProductTrees'
    when     67     then     'Inventory Transfers'
    when     68     then     'oWorkOrders'
    when     69     then     'Landed Costs'
    when     70     then     'oCreditPaymentMethods'
    when     71     then     'oCreditCardPayments'
    when     73     then     'oAlternateCatNum'
    when     76     then     'Postdated Deposit'
    when     77     then     'oBudget'
    when     78     then     'oBudgetDistribution'
    when     81     then     'oMessages'
    when     91     then     'oBudgetScenarios'
    when     97     then     'oSalesOpportunities'
    when     93     then     'oUserDefaultGroups'
    when     101     then     'oSalesStages'
    when     103     then     'oActivityTypes'
    when     104     then     'oActivityLocations'
    when     112     then     'oDrafts'
    when     116     then     'oDeductionTaxHierarchies'
    when     117     then     'oDeductionTaxGroups'
    when     125     then     'oAdditionalExpenses'
    when     126     then     'oSalesTaxAuthorities'
    when     127     then     'oSalesTaxAuthoritiesTypes'
    when     128     then     'oSalesTaxCodes'
    when     134     then     'oQueryCategories'
    when     138     then     'oFactoringIndicators'
    when     140     then     'oPaymentsDrafts'
    when     142     then     'oAccountSegmentations'
    when     143     then     'oAccountSegmentationCategories'
    when     144     then     'oWarehouseLocations'
    when     145     then     'oForms1099'
    when     146     then     'oInventoryCycles'
    when     147     then     'oWizardPaymentMethods'
    when     150     then     'oBPPriorities'
    when     151     then     'oDunningLetters'
    when     152     then     'oUserFields'
    when     153     then     'oUserTables'
    when     156     then     'oPickLists'
    when     158     then     'oPaymentRunExport'
    when     160     then     'oUserQueries'
    when     162     then     'Inventory Valuation'
    when     163     then     'oCorrectionPurchaseInvoice'
    when     164     then     'oCorrectionPurchaseInvoiceReversal'
    when     165     then     'oCorrectionInvoice'
    when     166     then     'oCorrectionInvoiceReversal'
    when     170     then     'oContractTemplates'
    when     171     then     'oEmployeesInfo'
    when     176     then     'oCustomerEquipmentCards'
    when     178     then     'oWithholdingTaxCodes'
    when     182     then     'oBillOfExchangeTransactions'
    when     189     then     'oKnowledgeBaseSolutions'
    when     190     then     'oServiceContracts'
    when     191     then     'oServiceCalls'
    when     193     then     'oUserKeys'
    when     194     then     'oQueue'
    when     198     then     'oSalesForecast'
    when     200     then     'oTerritories'
    when     201     then     'oIndustries'
    when     202     then     'oProductionOrders'
    when     203     then    'A/R Down Payment'
    when     204     then    'A/P Down Payment'
    when     205     then     'oPackagesTypes'
    when     206     then     'oUserObjectsMD'
    when     211     then     'oTeams'
    when     212     then     'oRelationships'
    when     214     then     'oUserPermissionTree'
    when     217     then     'oActivityStatus'
    when     218     then     'oChooseFromList'
    when     219     then     'oFormattedSearches'
    when     221     then     'oAttachments2'
    when     223     then     'oUserLanguages'
    when     224     then     'oMultiLanguageTranslations'
    when     229     then     'oDynamicSystemStrings'
    when     231     then     'oHouseBankAccounts'
    when     247     then     'oBusinessPlaces'
    when     250     then     'oLocalEra'
    when     280     then     'oSalesTaxInvoice'
    when     281     then     'oPurchaseTaxInvoice'
    when     300     then     'BoRecordset'
    when     305     then     'BoBridge'
    when     260     then     'oNotaFiscalUsage'
    when     258     then     'oNotaFiscalCFOP'
    when     259     then     'oNotaFiscalCST'
    when     261     then     'oClosingDateProcedure'
    when     10     then     'oBusinessPartnerGroups'
    when     278     then     'oBPFiscalRegistryID'
    else cast(@Obj_type as char(20)) end
    return @Obj_type_Name
    END

  • Run-Time Error '6' Overflow within BEx Analyzer after copy/paste query

    Hi all,
    User is getting a "Run-time error '6' overflow" message which is caused after copying any query in a 'query pack' to any free row/column within the same sheet (BEx Analyzer). This "query pack" has multiple queries within one sheet and covers 1800 rows so there is enough free space left for copying one of the queries to another position in the same sheet.
    Microsoft Office Excel SP2 is used which is part of MS Office professional edition 2003. The BW version is 3.0.
    Please let me know if more details are required or above mentioned error message is recognized and can be explained.
    Thanks and kind regards,
    Raymond Flaton

    Hi VRV,
      This error is caused whenever there is memory issue. If your query is built on a cube which has a BWA index then this problem can be related to the issue with the BWA server. Check your BASIS team to check if there is memory issue presently in the BWA server.
    Sometimes the issue is temporary, where the several users accesing the reports to fetch data from BWA lead to this type of error as the BWA gets overloaded. Try exiting the report and run it after some time again.
    Alternatively you can also try restricitng the selection for fetching the data in the report as suggested.
    Thanks

Maybe you are looking for