Query: how to use structure and selection and what's the difference between

Query: how to use structure and selection and what's the difference between these two?
Would be appreciated if some experts here give examples to demenstrate on how to use structure and selection in query and what's the difference between these two?
Thanks in advance!

Hi Kevin,
1. Well by default all the KF that you include in your query go into a Key Figure Structure. You can additionally have another structure for defining how your chars are laid out. A common example is a Calmonth structure where you have selections for 12 months, quarers and YTD values. This would be a char structure with different selections (for each month, qtr etc)
2. Yes, a selection with a KF is the same as restricting a KF. You can use am RKF is you have one on the left hand side, or if you need to do this locally in the query, right click the structure and choose New Selection, then proceed to choose your KF and reqd char values.
Hope this helps...

Similar Messages

What is the difference between the model Apple MacBook Pro MD313BZ / A and MD313LL / A, what is the difference between the model Apple MacBook Pro MD313BZ / A and MD313LL / A

what is the difference between the model Apple MacBook Pro MD313BZ / A and MD313LL / A, what is the difference between the model Apple MacBook Pro MD313BZ / A and MD313LL / A

Look at this support page regarding the identification of MBPs.:
http://support.apple.com/kb/HT4132
Note that the two letter before the '/' represent the country that they have been manufactured for.
Ciao.

When to use Infotype 0014 & 0015? what is the differences between them?

When to use Infotype 0014 & 0015? what is the differences between them?

Hello
Infotype 14 is used for recuring payment and deductions
The wagetype to be used for IT0014 is maintained in VV_52D7_B_0014_AL0 ,against the country grouping.
IT0014 is always entered with a start date and end date along with the wagetype and amount /unit relevent for payment/deduction
Say you want to make a special allowance payment to some employee for a period of 6 months only.
So in IT0014,you will enter the wagetype that is maintained for special allowance with a start date of say 01.10.2011 to 31.03.2012 with amont as Rs.1000.
So when you run payroll for the period october 2011 until march 2012,this amount of Rs.1000 will be paid to the employee
Infotype 15 is used for one time payment or deductions.
The wagetype to be used for IT0015 is maintained in VV_52D7_B_0015_AL0,against the country grouping
IT0015 is always entered with an effective date along with the wagetype and amount/unit relevent for payment deduction.
You want to make performance award pay to employees in the month of march 2012.
You will enter the amount in IT0015 with the effective date as 31.03.2012 for the wagetype as maintained for performance award ,amount say rs.50000.This amount will be caluclated and paid to the employee as a one time payment in march 2012 payroll
Thanks and Kind Regards
Ramana

I plan on buying the Early 2013 15inch Macbook Pro Retina and was wondering what's the difference between the Early 2013 and Mid 2012

Really need a good laptop for editing, and don't get me wrong I love macs.

Retina units cannot upgrade RAM after purchase (non-Retina units can upgrade storage and RAM after purchase).
My humble opinion is to buy the 16 GB now while you can. Unless 16 Gb pushes an already "too much" budget into impossible. If the 16 Gb pushes too far, you can consider a non-Retina 15 in and buy the default RAM to upgrade later.

What is the difference between SAP NW PI7.1 and PI7.1 EHP1

We have a customer using SAP PI7.1 EHP1. The application to be deployed
isdeveloped on SAP Netweaver PI 7.1 SP06.
We need to know if application developed and transported from PI7.1 is
compatible with EHP1?
Below are the Components used by the application .
1) SSL communication using SOAP adapter
2) Java mapping , Graphical mapping , XSLT mapping
3) Customised EJB modules
4) Adapter framework
5) ALE layer for IDoc communication from ERP to PI
6) RFC lookups to PI system and ERP system.
Questions
1)Will PI EHP1 be able to communicate with PI7.1 using SOAP adapter ?
2) What is the difference between SAP NW PI7.1 and PI7.1 EHP1 ?
Regards,
Sneha

Hi,
EHP Pi7.1 new
IPv6 Support in SAP Systems (new)
Async/Sync and Sync/Async Bridge in the JMS Adapter (New)
High Availability (New) Locate the document in its SAP Library structure
Use
A new concept is available for setting up a high availability environment for SAP NetWeaver Process Integration (PI). To do this, you need SAP Web Dispatcher for load balancing, and you must reconfigure your HTTP, RFC, and RMI connections so that they can be used for load balancing. You must also make various configuration steps in other components of your PI environment.
[Level 4: Document: XML to Text Conversion Module (New)] XML to Text Conversion Module (New)
Message Packaging (New)
Monitoring Milestones (New) Locate the document in its SAP Library structure
Use
You can use the new scenario variant Monitoring Milestones of the Business Process Management scenario to define a monitoring process that can monitor events from different applications. A monitoring process can subscribe to events from SAP or non-SAP systems.
check given Link
http://help.sap.com/saphelp_nwpi711/helpdata/en/61/8c3842bb58f83ae10000000a1550b0/frameset.htm
Regards,
Amit

What's the difference between Transferred Records and Added Records?

When right click an ODS or a cube to select Manage, then under the 3rd tab called Requests, there are two columns called Transferred Records and Added Records, what's the difference between these two?
Thanks

Hello KeLviN,
How r u ?
Consider a realtime example.
Assume a transfer of Transactional Data from R/3(with PSA) which is having Unit values in it.
Now, I found in RSA3 2844168 of records. In BW I saw one Data Packet with 306 error records(because of a UNIT value is not available in BW T006 table, Eg. YDD) which are automatically collected in PSA. Now in the Monitor screen you could see 2 Monitor status with GREEN Signals for 2 set of data.
1. with 2843862 records
2. with 306 records
Now, if u manage the Data Target you will get 2844168 in the Transferred Records & 2843862 in the Added Records. and the 306 error records are in the PSA.
Hope this is clear.
Best Regards....
Sankar Kumar
+91 98403 47141

Attestation Process: what's the difference between reject and decline?

While viewing an attestation request in Administrative Console, I can see 4 possible actions for each entitlement: Certify, Reject, Decline and delegate.
It's all clear with Certify and delegate, but what's the difference between options 'reject' and 'decline'?

I just can't believe that no one had used the feature described here
http://download.oracle.com/docs/cd/B32479_01/doc.903/b32450/todolist.htm#CHDIGGCI
Or used without knowing the difference?

What is the difference between OCIEnvCreate and OCIEnvNlsCreate with utf16

because i find a oci sample code cdemouni.c,in this sample,use OCIEnvCreate with mode set OCI_UTF16,but OCIEnvNlsCreate also can set charset and ncharset OCI_UTF16ID,what is the difference between OCIEnvCreate and OCIEnvNlsCreate with UTF16?

First, OCIEnvNlsCreate() is recommended way of switching to UTF-16 mode.
Second, OCIEnvNlsCreate() uses new semantics for bind and define buffer lengths. With new semantics all lengths are in bytes. With old semantics,
UTF-16 string lengths are in codepoints, while other character sets use bytes.
You can get new length semantics with OCIEnvCreate() as well, by
adding OCI_NEW_LENGTH_SEMANTICS to the 'mode' flags.
-- Sergiusz

What is the difference between OCIEnvCreate and OCIEnvNlsCreate?

because i find a oci sample code cdemouni.c,in this sample,use OCIEnvCreate with mode set OCI_UTF16,but OCIEnvNlsCreate also can set charset and ncharset OCI_UTF16ID,what is the difference between OCIEnvCreate and OCIEnvNlsCreate with UTF16?

First, OCIEnvNlsCreate() is recommended way of switching to UTF-16 mode.
Second, OCIEnvNlsCreate() uses new semantics for bind and define buffer lengths. With new semantics all lengths are in bytes. With old semantics,
UTF-16 string lengths are in codepoints, while other character sets use bytes.
You can get new length semantics with OCIEnvCreate() as well, by
adding OCI_NEW_LENGTH_SEMANTICS to the 'mode' flags.
-- Sergiusz

What is the differences between İphone 4s MD235AE/A and İphone 4s MD235AE-STC

I am going to purchase İphone 4s from Saudi Arabia, but there are two model md235ae/a and md235ae-stc
what is the differences between these two ?
thanks
merve

Here's the 4S Spec:
iPhone 4S - Technical Specifications
... and here's the iPhone 4 Spec:
iPhone 4 - Technical Specifications
Basically, the 4S is faster and has a better camera.

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC? 2) What is the difference between 6 and CC vercion? 3) When I used lightromm 3, I could see inEXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is ve

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
2) What is the difference between 6 and CC version?
3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad I am stiil waiting and hope that it would be possibble in the new versions. Or this indication may possible by setting?

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
Purchase the standalone upgrade from here: Products
Download CC version from here: Explore Adobe desktop apps | Adobe Creative Cloud
2) What is the difference between 6 and CC version?
See this comparison chart: Compare Lightroom versions | Adobe Photoshop Lightroom CC
3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad I am stiil waiting and hope that it would be possibble in the new versions. Or this indication may possible by setting?
Rob Cole's ExifMeta plugin displays the Subject Distance field (and much more). Unfortunately, his Web site appears to be down again. He used to be very active here, but he hasn't posted in several months.

What is the difference between (SEPA Structured) and (SEPA Unstructured)?

Hi,
Could you please teach me about "Format Payments (SEPA Structured)"
and "Format Payments (SEPA Unstructured)"?
1.What is Format Payments (SEPA Structured)?
Is (SEPA Structured) used with which case?
2.What is Format Payments (SEPA Unstructured)?
Is (SEPA Unstructured) used with which case?
3.What is the difference between (SEPA Structured) and (SEPA Unstructured)?
The customer is checking Note.791226.1.
However, he says that he cannot understand these two differences.
Please teach me.
Thanks.

From the European Payments Council website:
Remittance information: structure the unstructured
The SEPA Credit Transfer Scheme permits the end-to-end carrying of remittance data on a structured or unstructured basis appropriate to the nature of the payment (the remittance information usually contains details of the contract underlying the transaction such as an invoice number, for example). The length of the remittance information in the SCT Scheme is fixed at a standard length of 140 characters and banks are obliged to pass on the full remittance information.
The EPC supports a proposal developed by the European Association of Corporate Treasurers (EACT), which allows companies to agree on a structure for the remittance information. The EACT suggestion on how to structure the "unstructured" remittance fields allows companies exchanging a credit transfer to agree, among other, on information to be transmitted in a specific manner. Banks will carry remittance information structured in such an agreed way unaltered throughout the process chain.

What is the difference between Wine, Wineskin, Winery and Wine Bottler, and how do I get Wine to *ACTUALLY* work in Mountain Lion?

Ok, so this is my first post here and I am admittedly terrible at forums. Someone might say, "This was addressed in the ___________ thread by __________! Go read it!" --- that may be so but I've spent enough hours trying to google this problem into submission to no avail based on what is apparently working for others, so I would like a chance to get specific answers to specific questions that aren't from Mar 2011, etc.
So first of all, I'm confused by all the various Wine programs/apps/whatevers. I've seen Wine, Wineskin, Winery, Wine Bottler, and at this point I wouldn't be surprised if there are even more than that. What's the difference between all of these and how do they work with one another? What do I actually need to get windows programs working?
All of my google searches have led me to people giving out fish, but no one giving out fishing lessons. I'm not a pro at mac and windows and all that, but I'm a fairly bright individual who gets VERY frustrated, very quickly, when I don't understand the why and how of something I'm attempting.
I've also found "answers" where the person attempting to help starts off helpful enough, but degrades into the most archaic of techno-babble after about 5-6 sentences. On the other hand, I've watched tutorials on youtube where the poster decides to skip (apparently crucial) sections of the tutorial, and mutters such gems as: "... you might wanna have to run Wine first before you can do anything, cuz I think it has to configure it and set up a bunch of stuff"
O.o
A happy medium between techno-babble and the most basic of explanations would be ideal for me, and I'd imagine for others as well.
Here is a summarized history of my relationship with Wine:
Diablo II - I downloaded this awesome thing which ended up being... uh... I guess Diablo II in a Wineskin "wrapper". I'm not sure, all I know is that it's a D2 icon, and if I go to 'show package contents', it's got C drive, Program Files, et cetera inside of it. I double click it, it launches D2, and it works like a dream. <3
'Vanilla Install' - That's what I heard someone call it. It was the command/terminal style install using xquartz and xcode found at http://www.davidbaumgold.com/tutorials/wine-mac/. I followed every instruction to the letter, and got all the way to '$ sudo port install wine', at which point it started going smoothly, free from the possible error he described regarding the installation of xcode, and then just failed after I left the room to use the restroom and came back. Please don't ask me to repeat what the error was, because honestly, after reading more things on the interwebs, I'm confused as to why it's even necessary to go through all of that, so I'd rather not try that route again anyways, rendering the error message quite possibly irrelevant.
Wine + Wine Bottler - So I decided to try to seek out an easier method, as I know that one must exist that doesn't involve command lines. I found a video tutorial at http://www.youtube.com/watch?v=m0BBkISOcEA, and oh man would it be great if that method had actually worked. Again, I followed all instructions provided to procure my free fish, and at the point in the video where he declares that "xquarts or x11 will open" - it doesn't open. Nothing opens. I was trying to install Star Sonata, btw.
So here I am, thoroughly worn out, frustrated at all the random places Wine is installed on my mac now, and just want someone to explain it all, from top down, without getting toooooooo technical on me. I know that might be asking a lot...

## I know that the poster has already found a solution, but the following is a possible answer for others that have similar issues.
For Winebottler, just go to their website and download it. Run the program. Choose .wine as your prefix (best choice) or whatever suits you best. You'll need a functional X11. If you can't use the one that comes with your mac, download the latest one from the website.
If your issue is one with Winebottler's Wine not running correctly due to X11, then you have a pretty ugly problem, although a simple upgrade is the best solution (Upgrade XQuartz.app).
http://www.davidbaumgold.com/tutorials/wine-mac/#part-1
The above website is the easiest way to get REAL wine on your computer. First of all, Wineskin WInery, etc. are NOT WINE. They are 3rd party apps that may use Wine or may have originally part of Wine, but they are no longer up to date with Wine. WineBottler is currently up to date with the stable releases of Wine (but not the maintenence releases).
For the website tutorial and to run Wine on your mac without using a thrid party app, you will need to know a few things.
First, you will need to know basic control of the command line. That means, sudo (you must know the administrator password to your computer), and the forms of cd (change directory).
Second, you will need Xcode. Download 4.2 (stable) or whatever other versions you want, but beware: It is over 1 GB, and you will need time for it to work.
Third, you will need to get MacPorts and configure it. The tutorial should have this data.
When you download wine (use sudo port install wine-devel for the latest development release of wine), it will first download a lot of dependencies. This will take a while. After that, it will download wine itself.
After obtaining wine, to run a program, open the terminal.app window.
cd desktop/XYZ/ZYZ\ WRQ
The above will first enter the desktop, then folder XYZ, then folder ZYZ WRQ. From here,
wine th11e.exe
Or whatever executable you are trying to open. (Using Subterranean Animism as my example).
It should, in theory, run the program. Watch the terminal for errors. If there is an X11 problem, then it's not wine acting up. If the app crashes or has other issues, check the Wine Application Database to see if your app is compatible with wine.
If you have any further questions or other things, feel free to reply; I may or may not get back to you, but there's a good chance that someone will come in eventually. Otherwise, the Wine Wiki should have some information.

What is the difference between Firefox 7.0.1 and Firefox Desktop? I like what I see in Desktop. How do I get it.

How do I go about getting Firefox Desktop. I have Firefox 7.0.1 now as my browser. Do I have to download Desktop or do an add-on?

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
Purchase the standalone upgrade from here: Products
Download CC version from here: Explore Adobe desktop apps | Adobe Creative Cloud
2) What is the difference between 6 and CC version?
See this comparison chart: Compare Lightroom versions | Adobe Photoshop Lightroom CC
3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad I am stiil waiting and hope that it would be possibble in the new versions. Or this indication may possible by setting?
Rob Cole's ExifMeta plugin displays the Subject Distance field (and much more). Unfortunately, his Web site appears to be down again. He used to be very active here, but he hasn't posted in several months.

What is the difference between action and workflow? How do I decide that I need an action in a transaction and not a workflow and vice versa?

Dear Experts,
I have few doubts and request your expert inputs to clarify my doubts.
What is the difference between action and workflow? How do I decide that I need an action in a transaction and not a workflow and vice versa?
Your earliest response is highly appreciated.
Thanks,
SMTP

Hi SMTP,
First of all, as I mentioned action is nothing but an executable work item which is designed in the workflow itself. In other words, Workflow is like your OOPS class. At run time, workflow instances are created just like objects of classes. Now, the steps designed in the workflow are called TASKS and the instances of tasks are called WORKITEMS. Now, the work items where any user action is required are called executable work items. ANd the work items where no user action is required (for example, sending an email in background) are called non-executable work items.
Whether to go with development of workflow or not depends upon your business scenario. If your requirement is only to send an email and you find any BAdi or exit where in you can write your logic then there is no need of creating a workflow. If there is a defined business process with defined users and time lines, then you can go with the development of workflows.
Rest, the below link will help you in understanding basic concepts of workflow :
Why use SAP Workflow? | Insight Consulting Partners
Regards,
Richa

Query: how to use structure and selection and what's the difference between

Similar Messages

Maybe you are looking for