Query in a Role transported to Q system, not available in BEx Q system.

Hello Everybody,
After going through number of posts, I could not find a solution to my query.
I've created a query, assigned it to a role. Collected the necessary objects into a BEx Tranport Request. Assigned it to the correct package. Now after the TR has been imported into BW QA system, I dont see the query in BEx BWQ (Quality System). Do I need to transport the role too, to the BW QA system again (Role already exists in BW QA as well as PR systems)
Regards,
Sultan

SUltan,
This has been reported in many threads...
This usually happens when some element of the query is not collected properly / does not get generated in the target system properly.
To correct this ..
go to RSRT and execute your query ( you should be able to find it there ) and then you will find the query in BEX.
Arun

Similar Messages

  • U0093BEx transport request u0091ABC3005000u0092 is not available or not suitableu0094

    Hi,
    In our development, I tried to modify an old report but got the message
    “BEx transport request ‘ABC3005000’ is not available or not suitable”
    and opened up in BEx but in a read only mode.
    My goal was to modify this report.
    I therefore spent time to create a new report just like the original report with my modifications. On the next day, I wanted to make some changes in the new report but in opening it, I got the same message as the original one:
    “BEx transport request ‘ABC3005000’ is not available or not suitable”
    What seems to be going on? What can I do to be able to make modifications in BEx
    without this massage?
    The switch “Change” mode is no available to switch.
    I assume it implies that the query has been transported already so it won’t allow additional changes, but why it the same problem with the new one just created?
    Thanks

    Hi,
    I went through the steps you suggested:
    RSA1 -> Transport Connection
    Create transport requests for Bex (BEx truck icon); I double-clicked on a package (click on “Assign/Delete”) and created a new transport request AABB555.
    The problem is that, right after that when I open BEx, select Add-Ins, Open Queries, it attempts to open but instead of bringing up the list of queries for selection to attempt to edit, BEx flashes and freezes up.
    Then from there BEx freezes up. Any  ideas?
    I went into se09 and deleted the new transport request AABB555;
    Now, BEx can open up the queries instead of the freezing up, but it gives the message:
    "BEx transport request 'AABB555' is not suitable or available. Request/task AABB555' does not exist"
    When I choose OK, it brings me into the query but still only in read only mode and can't edit.
    Any more ideas?

  • Source system not available error

    If the error message is teling as source system not available
    so what can be the reasons for that and tell me the solution also.
    data cllection is incorrect
    so what can i do i have checked trfc connections every thing but every thing is fine
    so any body help me out in this.
    your suggstions will be rewarded.
    Regards.
    Vikram.

    Hi Vikram,
    Try the below mentioned steps:
    1. Check the connections on BW sysetem and R/3 system.
    Use the tcodes: sm58 and sm59. On the context menu of the source system created, check the option for conections. If connections are not fine, contact the basis team
    2. Go to 'source systems' select you source system and right click and select 'Repicate Data Sources' , then try replicating the the infosource for that
    appilication at the top node level as a whole, the try replicating the Data source
    with in your infoarea..
    Hope it would help ..if yes..assign points.
    Regards,
    Manu.

  • Error: Qeue 2LIS_03_BF is not available in the source system

    Dear Experts,
                     While scheduling 2LIS_03_BF. It displyed following error.
    Error : Queue 2LIS_03_BF is not available in the source system
    What could be the problem,
    Please help me to resolve this issue.
    Regards,
    Khader,

    Hi Mansi & Sujatha,
    I am also facing the same problem, in RSA7 status of  2LIS_03_BF is in red.
    Please suggest how could I proceed further.
    Regards,
    Venkat.

  • If the data is not available in R/3 systems(Ex: MM), who will load the data

    Hi All,
    Can anybody tell me that if the data is not available in R/3 systems(Ex: MM), who will load the data into that?
    Need Helpful Answers....
    Regards,
    Kiran Telkar

    Hi kiran,
    The data is generated in the R/3 when the business transactions take place.
    No one loads the data into R/3 as it done with BW. R/3 is a OLTP(online transactional processing) system which aides the day to day transactions of a business & theese transactions are stored in the R/3 in there respective tables in the form of records, so one record is generated for each transaction done.
    For example there will be record generated in different modules when there is an order placed or when a material is delivered against an order.
    Hope this helps,
    regards.

  • Transport Error - Datasource not available in the target system

    Hello exports,
    -- We have a custom Inboject zvendor
    -- text master data is coming from 0vendor
    -- need to transport the datasource 80vendort of the datamart + some other objects along with it.
    -- transport from CLDEV1 to CLQLT1
    -- included: datasource 80vendort, trasnfer structure, transfer rules.
    -- error: Datasource 80vendort does not exist in the source system CLQLT1 of version A.
    -- could you please suggest me if i have missed something in here.
    Measures taken:
    -- i have tried doing generate export data source in the CLQLT1 system also.
    -- replicated the datasources for the self source system in CLQLT1.
    -- observed that the datasource 80vendort is not yet visible in datasource overview of the self source system of CLQLT1.
    Solution:
    -- create a new tranport only for the datasource 80vendort, transfer structure and transfer rules.
    Wondering if this solutions would work. Is there any thing I am missing...?
    Please suggest. Any suggestions are highly appreciated.
    Thanks,
    Sweatha.
    Message was edited by: Sweatha Mohan

    Hi Sweatha,
    When we are transporting data source, did you know that we should first transport the data source from R/3 DEV to R/3 QA (Source Systems) and replicate them to BW QA later on?
    Because if we transport BW Objects first, we will get similar errors such as what you have experienced.
    Hope it helps and if it did, award me points...
    --Jkyle

  • MCW_AA111 System not a valid BW target system for analytical applications

    Dear Gurus,
    Our project would like to use retail allocation strategy with reference to SAP BW, such as
    Quotas based on SAP BW data
    Top down (SAP BW)
    Bottom up (SAP BW)
    To retract the data from BW, we go to the configuration of Data Retraction for Retail/CP. (T-CODE: MCW_AA).
    In the Maintenance of Queries for Analytical Applications, we wanted to add a new entry in the query list. We can find the Target Sys. But when we tried the input help(F4) of the Analyt. Appl. Query., the msg: "MCW_AA111:System is not a valid BW target system for analytical applications" prompt out.
    RFC connection has already been established between SAP-retail and BW.
    Does anybody have any clue?
    Thank you.
    Alex.

    hi Kevin,
    check if helps following oss note
    Note 983449 - Termin A122 1COLUMN no valid characteristic of infoprovider
    Symptom
    Termination A 122 Brain occurs when you test and generate a query. The system does not recognise the characteristic 1COLUMN.
    Other terms
    Query, condition, COB_PRO
    Reason and Prerequisites
    This problem is caused by a program error.
    Solution
    SAP NetWeaver 2004s BI
               Import Support Package 10 for SAP NetWeaver 2004s BI (BI Patch 10 or SAPKW70010) into your BI system. The Support Package is available once Note 914304 "SAPBINews BI 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
    In urgent cases, you can implement the correction instructions.
    You must first implement Notes 932065, 935140, 948389, 964580 and 969846, which provide information about transaction SNOTE. Otherwise, problems and syntax errors may occur when you deimplement some notes.

  • System Type ERP not available while creating Buisness System For ECC in SAP Sourcing 9.0

    Hi,
    I need to import Master data in SAP Sourcing but when i am uploading master data i am getting this errror
    Business system ECQCLNT340 does not match with local SAP Sourcing System ID SOURCING.
    i have followed the steps in config guide of SAP ERP with SAP Sourcing.
    when i am creating business system in SAP Sourcing system type ERP is not available.
    i have also attached the error file, please check
    --------------Version---------------
    ECC 6.0 Ehp6
    SAP Sourcing 9.0 on NW7.3 Ehp1 on IBM DB2
    Thanks and Regards,
    Murtaza Najmi

    Thanks you Prasad,
    this issue has been resolved and i have completed the installation part of SAP Sourcing and Contract generation.
    Now , I am getting error while uploading clause document,  my functional team member are not able to upload clause document. kindly suggest.
    ----------------------Error Description---------------
    Login with buyer link into the system-> it has all authorizations
    then Goto -> Contract Management -> Clause Library -> Clause list -> Click on New button -> Click on Add button -> Browse Document
    it is showing POPUP with Error that "There is a problem with the Contract Generation web service Contact your system administrator"
    Thanks and Regards,
    Murtaza Najmi

  • Transport error: "Formula  is not available in the table RSAFORMMAP"

    Hi,
    During a transport from DEV to TESTing environment, there was a failure and most details from the transport log was:
    “Formula  is not available in the table RSAFORMMAP “
    I realized that there were 4 objects in the transport request with some lengthy alphanumeric names.
    How to I go about in identify the problem and what will be the most likely fix?
    Thanks

    Go to transport connection in RSA1 and choose your cube or DSO and choose dataflow afterwards..so that all bex reports and related formula variables are recollected into a transport request.. It is better to recollect them and transport again.

  • Technical system not available in Integration tab of Busines System SLD

    Hi ,
      I am  creating a Business System in SLD(on Solution Manager) for XI system but not able to see any technical system from Integration tab of Business system.
       I have already created a technical system in SLD.
    Please suggest  what other settings I need to check.
    Thanks
    Bhaskar

    Hi,
    Clear the cache and try again.
    Go to Environment -
    > Click on Clear SLD data cache.
    If you still din't get then In the SLD goto technical system, in the dropdown box select your Technical system type(web as Java/....) and cleck on display, if it is there then it was created other wise it wasn't created.

  • System not assigned to any business system group

    In transaction /SAPAPO/MAT1 an error occurs when I try to create a new product.
    Error message: " System SC1CLNT100 not assigned to any business system group".
    When I received this error I created business system group in SLD and assigned my system to this new business system group.
    Then I went to transaction RZ70 and executed Data Collector without Job scheduling.
    But when start transaction /SAPAPO/MAT1 again the error /SAPAPO/MAT030 still occurs.
    What should be done to make changes, which I made in SLD visible for the system?
    Thank you in advance,
    Kind regards,
    Maria Kazakova

    I assume you assigned this BSG in the IMG in APO
    "As an independent logical system, the APO System must, in addition to the SAP R/3 Systems, be assigned to a business system group (BSG)."

  • Technical System not appearing while creating Business System

    Hi
    We had already created business system and assigned a technical system and all the interfaces was working fine.
    Now we removed the technical system and created a new technical system, since we need to point to different server.
    I created a new technical system, oped the old business system and in integration tab, when i click on change technical system.
    The newly created technical system is not appearing.
    Thought of assigning the business system directly in technical system, but it is not allowing and i am getting message business system is already assigned.
    Can you pls help
    Regards
    Madhan D

    Hi Madhan,
    When you create a Business System, it will ask for the type of Technical system like Web AS ABAP, Web AS Java etc.
    So, the new TS type should match the TS type you selected for your BS so that you can see your TS in the dropdown, when you click on "Change" link.
    HTH,
    GP

  • Q10 contacts not available to BMW Bluetooth system....​..........

    I have a (roughly) four month old Q10.  When I originally paired it to my MINI Bluetooth system, it worked fine and my contacts were available in the MINI's display dialog.
    A couple weeks ago, I added a Microsoft Hosted Exchange Server email account to the Q10's account list.  From that point forward (give or take) the only data displayed in the MINI's phone book display was the corresponding phone number for the contact.  No other data.
    A couple days ago, I acquired a new BMW X5.  The MINI and BMW Bluetooth systems are very similar (both BMW systems) and I'm still experiencing the same problems.  Nothing but the phone number is displayed in the X5 dialog.
    Anyone else have a similar experience?
    Thanks

    I have made progress on my original issue, but it took some time to figure things out.
    The problem on my Q10 started while it was still connected to the MINI that I was driving at the time.  After the software update that was downloaded to the device, around early September sometime, the MINI Bluetooth display began showing only numbers, no associated names.  Since I was about to trade the car, I ignored the problem.
    I did try syncing the phone with BB Link on two different computers (one office, one home office), but only wound up with two duplicate contact lists on the device.
    When I acquired the X5 on October 1st and paired the phone, same display issues.  So I contacted RIM tech support and spent about an hour sitting in the vehicle, trying different actions, to no avail.
    Being kind of fed up with the problem, and all the time it was using up, I responded with the usual email message to the open case log with my usual "since you can't fix the problem, thanks for the brick" dialog.
    RIM responded with a detailed message advising me to do a security wipe (after backing up of course) on the Q10, then add back my Microsoft Hosted Exchange email account credentials.
    This fixed the problem.  I have not reentered some of my other email accounts, which I thought might have a negative effect.  Since most of my correspondence and calendar are on the Hosted Exchange account, I'm in pretty good shape and don't want to do anything to screw it up again.

  • New role in CUA user record not getting pushed to child system

    I added a new child system to our CUA setup.  I've confirmed that the RFC connections from both sides are working properly (test connection succeeds) and I've successfully completed the user transfer function in SCUG.  All exisitng roles assigned to the users in the child system are now appearing in the CUA central system as expected.  I added a new role to a user via SU01 in the central system to this child system, but when I go to the child system, it does not appear in the user's SU01 record.  Any ideas why this would not be syncing properly?
    Thanks,
    Michael

    Hi,
    Whenever you create a new role in child system, it has to be sync up with the central system.
    To sync up with the central system, login to central system goto su01>enter any user name>go to roles tab- click on Text comparision from chiled system. Its navigate to another screen, there you have to mention the child system and click on execute. it syncs up with child sytem. Hope it will help you out to resolve the issue.
    If still you are getting the same issue login to the central system.. goto SE38-- enter the program name as "RSCCUSND" and click on execute there mention the user name and the logical system id of the Child system name, select the parameters which you wanted to distribute to child system and execute it.
    Best Regards
    Mani

  • Bex transport request 'BWDK900073' is not available or not suitable

    Hi,
    i have transported a cube with "data flow after" option and collected in a package zbexquality.
    this request was transported to productin and i can see the queries in production too.
    now when i go to change any of the queries on this cube, it gives me the following error:
    ==========
    Diagnosis
    There are the following possible causes:
    No request has been set up as the standard transport request for BEx objects.
    The (set up) request 'BWDK900073' (for the package 'ZBEXQUALITY' ) has already been released.
    The (set up) request 'BWDK900073' (for the package 'ZBEXQUALITY' ) is not of the type 'transportable change request'.
    System response
    The request BWDK900073 can not be used to record changes to BEx objects (queries or Excel workbooks). The changes made to objects you are editing will not be logged.
    Procedure
    If you want to record changes to BEx objects, set up an open transportable change request as the transport request for BEx objects. (If the package 'ZBEXQUALITY' is not empty, set up a request for this package).
    Inform your system administrator of your actions, or enter a new, targeted transport request in the Administrator Workbench in the transport connection by using the 'BEx' pushbutton (Create Transport Requests for BEx).
    Procedure for System Administration
    ====================
    when i try to change any other queries( transported using different request and different package earlier), it gives me teh same message.
    what is the reason? what is wrong?
    thank u in advance

    hi S B,
    as mentioned in your previous thread,
    each time you released request for query to be transported for 1st time, you will need to create
    BEx request with same package as soon as the request released, otherwise you won't be able to save changes
    to the query in that request.
    rsa1->transport connection->icon truck and bex,
    assign with package ZBEXQUALITY.
    hope this helps.
    ZBEXQUALITY is not a good naming. some sample
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
    Customer Package Description
    ZBW BW Package for Custom Objects
    ZACTPAY Accounts Payable - Query-only package
    ZACTREC Accounts Receivables - Query-only package
    ZCONTROLLING Controlling - Query-only package
    ZSALES Sales and Distribution – Query-only package
    ZFIAA Fixed Assets - Query-only package
    ZPROJ_SYS Project Systems – Query-only package
    ZPURCH Purchasing - Query-only package
    ZSP_LEDGER Special Ledger - Query-only package

Maybe you are looking for