Query in line with Enterprise Repository

Hi All,
We are working on the integration with SAP and MOSS.
We didn't yet installed the Duet Enterprise software yet.
I am trying to understand the components and the landscape to proceed further. My SAP Component version is SAP ECC 6.0.
Here is my question.
I have executed transaction SPROXY and then clicked on Enterprise Sevices Browser. Here I could see that No connection to ESR.
I understand that to connect to ESR I need to maintian the RFC connection.
However I want to understand how the ESR is installed/activated ?
Does it comes along with the Duet Enterprise SAP components or Do I need to install it separately.
By going through the forms I understand that the ESR comes with the SCL layer when we install Duet Enterprise SAP components.
Please correct me if I am wrong.
Thanks & Regards,
Ravi Ganji

Hi,
the ESR is not part of the SCL. It just has to be connected from the SCL(see the developers guide at http://www.sdn.sap.com/irj/sdn/duet-enterprise?rid=/library/uuid/302608bd-840e-2e10-c2ba-8480e0cf5da7).
ESR is for example part of NetWeaver CE 7.2. -- so you have to install it from there. Instructions to install CE can be found here:
https://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000727134& -> 3 u2013 Installing the CE Server (64-Bit) -> Installation Guides u2013 SAP NetWeaver CE 7.2
In order to configure the ESR follow the 7.1 guide at Enterprise Services Repository&Registry
Regards,
Holger.

Similar Messages

Query 0: Runtime error There is already a line with the same key. with para

Dear all,
I have a query with several variables. One of the variables is Version. When I use certain values e.g. 1,2 or 3, I can generate the query without any problem. However, when I use the other values e,g, 4, 5, or 6, the query gives me with the following error messages :
1. Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
2. Error while reading data; navigation is possible
3. >> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
Error 1
Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
Message no. DBMAN428
Error 2
Error while reading data; navigation is possible
Message no. BRAIN289
Diagnosis
An error occurred while reading the data. The query result is therefore empty or inconsistent and is not buffered in the OLAP cache.
Procedure
You can continue to navigate or return to the last navigation step.
Error 3
>> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
Message no. RS_EXCEPTION301
Diagnosis
En error has been triggered. This message specifies where in the coding the error occurred. This helps you to localize the error quickly.
May I know what causes this error and how to troubleshoot it?
Thank you.

Venkat,
You are either a genius or working for SAP.
In any case, your solution solved my problem.
Thanks heaps!

Error In Oracle Enterprise Repository in IBM AIX 5.3

Hello,
I'm have installed:
Oracle Weblogic Server 11g (10.3.3)
Oracle Enterprise Repository 11g (11.1.1.3)
The installation is succefully but when i try access to http://10.1.1.218:7111/oer is empty !!
in the log apper:
$ tail -f nohup.out
JIT - r9_20091123_13891
GC - 20091111_AA)
JCL - 20091202_01
Starting WLS with line:
/usr/java6_64/bin/java -Xms128m -Xmx512m -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=oer_server1 -Djava.security.policy=/oracle/app/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true -server -da -Dplatform.home=/oracle/app/Middleware/wlserver_10.3 -Dwls.home=/oracle/app/Middleware/wlserver_10.3/server -Dweblogic.home=/oracle/app/Middleware/wlserver_10.3/server -Dweblogic.management.discover=false -Dweblogic.management.server=http://snode938:7115 -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/oracle/app/Middleware/patch_wls1033/profiles/default/sysext_manifest_classpath:/oracle/app/Middleware/patch_ocp353/profiles/default/sysext_manifest_classpath weblogic.Server
<Oct 28, 2011 7:06:22 PM GMT-04:30> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with IBM J9 VM Version 2.4 from IBM Corporation>
<Oct 28, 2011 7:06:22 PM GMT-04:30> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
<Oct 28, 2011 7:06:23 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Oct 28, 2011 7:06:23 PM GMT-04:30> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Oct 28, 2011 7:06:24 PM GMT-04:30> <Notice> <Log Management> <BEA-170019> <The server log file /oracle/app/Middleware/user_projects/domains/oer_domain/servers/oer_server1/logs/oer_server1.log is opened. All server side log events will be written to this file.>
<Oct 28, 2011 7:06:26 PM GMT-04:30> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Oct 28, 2011 7:06:28 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Oct 28, 2011 7:06:28 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Oct 28, 2011 7:06:31 PM GMT-04:30> <Warning> <HTTP> <BEA-101369> <ServletContext@766848437[app:oer module:/oer path:/oer spec-version:null]: The encoding jsp-descriptor param has been deprecated. Consider declaring the encoding in the jsp-config element (web.xml) or as a page directive (pageEncoding) instead.>
INITIALIZING EXTERNAL EVENTING
running in single server mode
Intializing Thinkmap Server. Version: 2.6.051122173836X
Thinkmap Server initialized.
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.1.1.218:7111 for protocols iiop, t3, ldap, snmp, http.>
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "oer_server1" for domain "oer_domain" running in Production Mode>
OER: Asset Preload completed: 4982ms
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
snode938:/oracle/app/Middleware/user_projects/domains/oer_domain/bin $
snode938:/oracle/app/Middleware/user_projects/domains/oer_domain/bin $
snode938:/oracle/app/Middleware/user_projects/domains/oer_domain/bin $
snode938:/oracle/app/Middleware/user_projects/domains/oer_domain/bin $ tail -f nohup.out
Intializing Thinkmap Server. Version: 2.6.051122173836X
Thinkmap Server initialized.
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.1.1.218:7111 for protocols iiop, t3, ldap, snmp, http.>
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "oer_server1" for domain "oer_domain" running in Production Mode>
OER: Asset Preload completed: 4982ms
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Oct 28, 2011 7:16:07 PM GMT-04:30> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=WebAppModuleOverviewPage&WebAppModuleOverviewPortlethandle=com.bea.console.handles.ModuleHandle%28%22com.bea%3AName%3Doer%2CType%3DAppDeployment%3Boer-web%3B%2Foer-web%3B%3Cnone%3E%3BWEBAPP%22%29.>
java.lang.Exception: Provider named 'SUN' not found
at com.flashline.crypto.EncryptedPassword.constructor(EncryptedPassword.java:125)
at com.flashline.crypto.EncryptedPassword.<init>(EncryptedPassword.java:74)
at com.flashline.crypto.EncryptedPassword.<init>(EncryptedPassword.java:38)
at com.flashline.enterprise.authentication.servlet.Login.service(Login.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:529)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
at com.flashline.enterprise.authentication.EnterpriseSession.checkLogin(EnterpriseSession.java:441)
at com.flashline.cmee.jsp.CMEESession.checkLogin(CMEESession.java:254)
at com.flashline.cmee.jsp.CMEESession.checkLogin(CMEESession.java:250)
at com.flashline.cmee.jsp.CMEESession.checkLogin(CMEESession.java:249)
at jsp_servlet.__index._jspService(__index.java:130)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3686)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Any idea ?
Thank.-
Post Data: I search any solution in My Oracle Support, and apply the only solution found here. But the issue persist...

if you see the log file it tells about saposcolSAPCAR: could not open for writing /usr/sap/IND/SYS/exe/run/saposcol (error 28). Text file busy
could you please check is there any SAPOSCOL process running?
that is why you are getting error as unpack was executed with status ERROR
cheers,
-Sunil

Oracle Enterprise Repository

Hi All,
We are installing OER on weblogic. we successlly installed it, but we are unable to create Domain
weare facing below issue
2010-08-05 18:05:54,128 INFO [WizardController] com.oracle.cie.domain.template.catalog.impl.ComponentsXMLConverter - /apps/erikas3/aerikas3/u01/app/oracle/product/fmw/wlserver_10.3/common/lib/components.xml does not contain component elements and will be skipped
2010-08-05 18:05:54,254 INFO [WizardController] com.oracle.cie.wizard.domain.gui.tasks.MultipleTemplateSelectionGUITask - Selected required template: Basic WebLogic Server Domain:10.3.3.0 [apps/erikas3/aerikas3/u01/app/oracle/product/fmw/wlserver_10.3/common/templates/domains/wls.jar]
2010-08-05 18:06:54,682 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No config-groups.xml found in template
2010-08-05 18:06:54,691 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2010-08-05 18:06:58,319 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Adding top-level component reference: WebLogic Server version 10.3.3.0
2010-08-05 18:06:58,339 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Setting symbol for component WebLogic Server version 10.3.3.0 to WebLogic_Server_10.3.3.0_wlserver_10.3_ORACLE_HOME
2010-08-05 18:06:59,229 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2010-08-05 18:06:59,611 WARN [WizardController] com.oracle.cie.domain.AbstractTemplate - Could not find component name 'Oracle Enterprise Repository' version 'null'
2010-08-05 18:06:59,612 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Replacing component reference Oracle Enterprise Repository version null with top-level component reference: WebLogic Server version 10.3.3.0
2010-08-05 18:06:59,612 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Setting symbol for component WebLogic Server version 10.3.3.0 to WebLogic_Server_10.3.3.0_wlserver_10.3_ORACLE_HOME
2010-08-05 18:06:59,813 WARN [WizardController] com.oracle.cie.domain.aspect.XBeanConfigAspect - Unable to locate property:Target on type:class com.oracle.cie.domain.xml.configxb.impl.MachineTypeImpl
2010-08-05 18:06:59,864 WARN [WizardController] com.oracle.cie.domain.aspect.XBeanConfigAspect - Unable to locate property:Target on type:class com.oracle.cie.domain.xml.configxb.impl.ServerTypeImpl
2010-08-05 18:07:52,628 ERROR [WizardController] com.oracle.cie.common.util.JdkVersion - JDK version is null.
2010-08-05 18:10:26,218 INFO [WizardController] com.oracle.cie.domain.assignment.ServerMachineAssignment - ListenPort internal Validation result= [null]
2010-08-05 18:10:51,639 INFO [WizardController] com.oracle.cie.domain.assignment.ServerMachineAssignment - ListenPort internal Validation result= [null]
2010-08-05 18:10:55,139 INFO [WizardController] com.oracle.cie.domain.DomainChecker - ListenPort external Validation result= [null]
2010-08-05 18:11:32,465 ERROR [create_gui] com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask - Generation Error!!
Traceback (innermost last):
(no code object) at line 0
SyntaxError: ('Lexical error at line 6, column 11. Encountered: "@" (64), after : ""', ('<iostream>', 6, 11, 'oerPort = @DOMAIN_LISTEN_PORT@'))
     at org.python.core.parser.fixParseError(Unknown Source)
     at org.python.core.parser.parse(Unknown Source)
     at org.python.core.Py.compile_flags(Unknown Source)
     at org.python.util.PythonInterpreter.execfile(Unknown Source)
     at org.python.util.PythonInterpreter.execfile(Unknown Source)
     at com.oracle.cie.domain.script.ScriptHelper.executeEmbeddedTemplateScript(ScriptHelper.java:1571)
     at com.oracle.cie.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:1322)
     at com.oracle.cie.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:1305)
     at com.oracle.cie.domain.DomainChecker.preprocessOutput(DomainChecker.java:143)
     at com.oracle.cie.domain.DomainGenerator.generate(DomainGenerator.java:269)
     at com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:216)

Hi,
Once before you install OER u need to create some Table spaces for OER and some default OER user for Installation and that from the log i understood tat you are trying to create the Domain from an existing WLS Template.
Once u run the scripts for OER User schemas and Tablespaces and OER user then reinstall OER and then try to create the DOmian with SOA and OER.
Correct me if i m wrong..
Thanks and Regards,
Ramnath

Oracle Enterprise Repository post installation steps failed.

Hi,
I was able to install Oracle 11g Express and Weblogic 10.3.6.0 and 11.1.1.6.0 and when try to follow post installation steps to extend a domain installation fails with following steps. Could you please assist me
what could i have done wrong or suggest me hints to locate the error.
2013-01-30 23:08:04,768 INFO [WizardController] com.oracle.cie.domain.template.catalog.impl.ComponentsXMLConverter - C:\Oracle\Middleware\wlserver_10.3\common\lib\components.xml does not contain component elements and will be skipped
2013-01-30 23:08:11,830 INFO [WizardController] com.oracle.cie.wizard.domain.gui.tasks.MultipleTemplateSelectionGUITask - Selected required template: Basic WebLogic Server Domain:10.3.6.0 [C:\Oracle\Middleware\wlserver_10.3\common\templates\domains\wls.jar]
2013-01-30 23:08:15,362 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2013-01-30 23:08:15,471 WARN [WizardController] com.oracle.cie.domain.AbstractTemplate - Could not find component name 'Oracle Enterprise Repository' version 'null'
2013-01-30 23:08:15,471 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Replacing component reference Oracle Enterprise Repository version null with top-level component reference: WebLogic Server version 10.3.6.0
2013-01-30 23:08:15,471 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Setting symbol for component WebLogic Server version 10.3.6.0 to WebLogic_Server_10.3.6.0_wlserver_10.3_ORACLE_HOME
2013-01-30 23:08:27,096 INFO [WizardController] com.oracle.cie.domain.assignment.ServerMachineAssignment - ListenPort internal Validation result= [null]
2013-01-30 23:08:28,737 INFO [WizardController] com.oracle.cie.domain.DomainChecker - ListenPort external Validation result= [null]
2013-01-30 23:08:32,580 ERROR [create_gui] com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask - Generation Error!!
Traceback (innermost last):
(no code object) at line 0
SyntaxError: ('Lexical error at line 6, column 11. Encountered: "@" (64), after : ""', ('<iostream>', 6, 11, 'oerPort = @DOMAIN_LISTEN_PORT@'))
     at org.python.core.parser.fixParseError(Unknown Source)
     at org.python.core.parser.parse(Unknown Source)
     at org.python.core.Py.compile_flags(Unknown Source)
     at org.python.util.PythonInterpreter.execfile(Unknown Source)
     at org.python.util.PythonInterpreter.execfile(Unknown Source)
     at com.oracle.cie.domain.script.ScriptHelper.executeEmbeddedTemplateScript(ScriptHelper.java:1574)
     at com.oracle.cie.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:1322)
     at com.oracle.cie.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:1305)
     at com.oracle.cie.domain.DomainChecker.preprocessOutput(DomainChecker.java:143)
     at com.oracle.cie.domain.TemplateImporter.generate(TemplateImporter.java:274)
     at com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:216)
Thanks
Edited by: 985275 on Jan 31, 2013 12:13 AM

Hi,
After installing Oracle DB, did you Install RCU setup succesfully??
If not, Install RCU and then procced.
-Santosh

Upgrade of database with GC repository resides

I have GC 10.2.0.3 running with the repository stored in a 9.2.0.8 database.
I would like to upgrade the database to 10.2.0.3 using dbua if possible. When the dbua sees an upgrade to 10.2 it creates a new SYSMAN schema, but I already have one that the Grid Control install created when I used the option "install into an existing database."
I've searched MetaLink on how to do this, and created a SR but am having trouble getting support to understand what I'm attempting.
I'm open to anything, create a new database, etc. The only thing I want to be sure of is to not loose the information that I've already established in Grid, and I'm assuming it's stored in the SYSMAN schema.

Totally fresh clean 10gR2 database on a different host and platform.
2.3 Export/Import
If the source and destination database is non-10g, then export/import is the only option for cross platform database migration.
For performance improvement of export/import, set higher value for BUFFER and RECORDLENGTH . Do not export to NFS as it will slow down the process considerably.
Direct path can be used to increase performance. Note – As EM uses VPD, conventional mode will only be used by Oracle on tables where policy is defined.
Also User running export should have EXEMPT ACCESS POLICY privilege to export all rows as that user is then exempt from VPD policy enforcement. SYS is always exempted from VPD or Oracle Label Security policy enforcement, regardless of the export mode, application, or utility that is used to extract data from the database.
2.3.1 Prepare for Export/Import
* Mgmt_metrics_raw partitions check
select table_name,partitioning_type type,
partition_count count, subpartitioning_type subtype from
dba_part_tables where table_name = 'MGMT_METRICS_RAW'
If MGMT_METRICS_RAW has more than 3276 partitions please see Bug 4376351 – This bug is fixed in 10.2. Old partitions should be dropped before export/import to avoid this issue – This will also speed up the export/import process.
To drop old partitions - run exec emd_maintenance.partition_maintenance
(This needs shutdown of OMS and set job_queue_processes to 0 during the time drop partitions is run) – Please refer to EM Performance Best practices document for more details on usage.
Workaround to avoid bug 4376351 is to export mgmt_metrics_raw in conventional mode – This is needed only if drop partition is not run. Note - drop old partitions run is highly recommended.
* Shutdown OMS instances and prepare for migration
Shutdown OMS, set job queue_processes to 0 and remove dbms jobs using commands
connect /as sysdba
alter system set job_queue_processes=0;
connect sysman/<password>
@ORACLE_HOME/sysman/admin/emdrep/sql/core/latest/admin/admin_remove_dbms_jobs.sql
2.3.2 Export
Before running export make sure that NLS_LANG variable is same as database characterset. For example after running this query
SQL> select value from nls_database_parameters where PARAMETER='NLS_CHARACTERSET';
VALUE
WE8ISO8859P1
Then NLS_LANG environment variable should be set to AMERICAN_ AMERICA. WE8ISO8859P1
* Export data
exp full=y constraints=n indexes=n compress=y file=fullem102_1.dmp log=fullem102exp_1.log
Provide system username and password when prompted.
Verify the log file and make sure that no characterset conversion happens (this line should not be present in log file “possible charset conversion”)
* Export without data and with constraints
exp full=y constraints=y indexes=y rows=n file=fullem102_2.dmp log=fullem102exp_2.log
Provide system username and password when prompted
2.3.3 Import
Before running import make sure that NLS_LANG variable is same as database characterset.
* Run RepManager to drop target repository (if target database has EM repository installed)
cd ORACLE_HOME/ sysman/admin/emdrep/bin
RepManager repository_host repository_port repository_SID -sys_password password_for_sys_account -action drop
* Pre-create the tablespaces and the users in target database
@ORACLE_HOME/sysman/admin/emdrep/sql/core/latest/admin/admin_create_tablespaces.sql
@ORACLE_HOME/sysman/admin/emdrep/sql/core/latest/admin/admin_create_repos_user.sql
@ORACLE_HOME/sysman/admin/emdrep/sql/core/latest/admin/admin_pre_import.sql
For first 2 scripts, we need to provide input arguments when prompted or you can provide them on command line for example
@ORACLE_HOME/sysman/admin/emdrep/sql/core/latest/admin/admin_create_tablespaces.sql MGMT_TABLESPACE <path>/mgmt.dbf <size of mgmt.dbf> <aotoextend size> MGMT_ECM_DEPOT_TS <path>/mgmt_ecm_depot1.dbf <size of mgmt_ecm_depot1.dbf> <aotoextend size> MGMT_TABLESPACE <path>/mgmt.dbf <size of mgmt.dbf> <aotoextend size>
@/scratch/nagrawal/OracleHomes/oms10g/sysman/admin/emdrep/sql/core/latest/admin/admin_create_repos_user.sql sysman <sysman password> MGMT_TABLESPACE TEMP CENTRAL ON
* Import data -
imp constraints=n indexes=n FROMUSER=sysman TOUSER=sysman buffer=2097152 file=fullem102_1.dmp log=fullem102imp_1.log
* Import without data and with constraints -
imp constraints=y indexes=y FROMUSER=sysman TOUSER=sysman buffer=2097152 rows=n ignore=y file=fullem102_2.dmp log=fullem102imp_2.log
Verify the log file and make sure that no characterset conversion happens (this line should not be present in log file “possible charset conversion”)
2.3.4 Post Import EM Steps
* Please refer to Section 3.1 for Post Migration EM Specific Steps
3 Post Repository Migration Activities
3.1 Post Migration EM Steps
Following EM specific Steps should be carried out post migration -
* Recompile all invalid objects in sysman schema using
connect sysman/<password>
@ORACLE_HOME/sysman/admin/emdrep/sql/core/latest/admin/admin_recompile_invalid.sql
* Run post plugin steps to recompile any invalids, create public synonyms, create other users, enable VPD policy, repin packages-
connect sysman/<password>
@ORACLE_HOME/sysman/admin/emdrep/sql/core/latest/admin/admin_create_synonyms.sql
@ORACLE_HOME/sysman/admin/emdrep/sql/core/latest/admin/admin_post_import.sql
Provide <ORACLE_HOME/sysman/admin/emdrep/sql for em_sql_root
SYSMAN for em_repos_user
MGMT_TABLESPACE for em_tablespace_name
TEMP for em_temp_tablespace_name
Note – The users created by admin_post_import will have same passwords as username.
Check for invalid objects – compare source and destination schemas for any discrepancy in counts and invalids.
* Following queues are not enabled after running admin_post_import.sql as per EM bug 6439035, enable them manually by running
connect sysman/<password>
exec DBMS_AQADM.START_QUEUE( queue_name=> 'MGMT_TASK_Q');
exec DBMS_AQADM.START_QUEUE( queue_name=> 'MGMT_PAF_RESPONSE_Q');
exec DBMS_AQADM.START_QUEUE( queue_name=> 'MGMT_PAF_REQUEST_Q');
exec DBMS_AQADM.START_QUEUE( queue_name=> 'MGMT_LOADER_Q');
* Please check for context using following query
connect sysman/<password>
select * from dba_context where SCHEMA='SYSMAN';
If any of following context is missing create them using
connect sysman/<password>
create or replace context storage_context sing storage_ui_util_pkg;
create or replace context em_user_context sing setemusercontext;
* Partition management
Check if necessary partitions are created so that OMS does not run into problems for loading into non-existent partitions (This problem can come only if there are gap of days between export and import) –
exec emd_maintenance.analyze_emd_schema('SYSMAN');
This will create all necessary partitions up to date.
* Submit EM dbms jobs
Reset back job_queue_processes to original value and resubmit EM dbms jobs
connect /as sysdba
alter system set job_queue_processes=10;
connect sysman/<password>
@ORACLE_HOME/sysman/admin/emdrep/sql/core/latest/admin/admin_submit_dbms_jobs.sql
* Update OMS properties and startup OMS
Update emoms.properties to reflect the migrated repository - oracle.sysman.eml.mntr.emdRepConnectDescriptor
Update host name, port with the correct value and start the OMS.
* Relocate “Management Services and Repository” target
If “Management Services and repository” target needs to be migrated to the destination host, delete the old "Management Services and Repository" target. Add it again with same name "Management Services and Repository" on agent running on new machine.
* Run following sql to verify the repository collections are enabled for emrep target
SELECT
target_name,
metric_name,
task.task_id,
task.interval,
task.error_message,
trunc((mgmt_global.sysdate_utc-next_collection_timestamp )/1440) delay
from mgmt_collection_metric_tasks mtask,
mgmt_collection_tasks task,
mgmt_metrics met,
mgmt_targets tgt
where met.metric_guid = mtask.metric_guid AND
tgt.target_guid = mtask.target_guid AND
mtask.task_id = task.task_id(+) AND
met.source_type > 0 AND
met.source != ' '
AND tgt.target_type='oracle_emrep'
ORDER BY mtask.task_id;
This query should result same records in both source and destination database. If you find any of collections missing in destination database, run following to schedule them in destination database
DECLARE
traw RAW(16);
tname VARCHAR2(256);
ttype VARCHAR2(64);
BEGIN
SELECT target_name, target_type, target_guid
INTO tname, ttype, traw
FROM mgmt_targets
WHERE target_type = 'oracle_emrep';
mgmt_admin_data.add_emrep_collections(tname,ttype,traw);
END;
* Discover/relocate Database and database Listener targets
Delete the old repository database target and listener and rediscover the target database and listener in EM

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

Line with same key

Hello everybody, Im facing a problem when trying to run a query
Im getting an error that says: There is already a line with th same key.
I ran the program ANALYZE_RSZ_TABLES and I found the query that Im trying to run under the error: Selections or RKFs with incomplete defeinition. Im not sure if Im in the right track, or if there is something else that I have to check.
Can somebody help please?

yes I already went there too but found anything important. I did search the oss nothes but nothing worked, I´ll keep trying and see if I can solve it, but if somebody has any idea, please tell me

JCO3: NullPointerException unregistering server with custom repository

Hello,
I have a JCO 2 project running on a J2EE server that we ported over to JCO3, and the ultimate issue is that when I
stop the JCoServer in the application, it's throwing a null pointer exception. Seemingly because the JCoServers
are in a higher classloader, they are still there on restart, and then I get the NullPointerException trying to
recreate the server as well. I very well may be doing something totally wrong here...
I'm creating the Data Provider, Repository, and Server as follows:
========================================================
// This is a simple implementation of ServerDataProvider
markviewDataProvider = new MarkviewServerDataProvider();
if (!Environment.isServerDataProviderRegistered()){
log.debug("Registering data provider");
Environment.registerServerDataProvider(markviewDataProvider);
else{
log.error("Data provider already registered.");
throw new IllegalStateException("Data provider already registered. Please restart application server.");
// Create the neccessary properties and assign to data provider
// Their values are being read from a database
serverProperties.setProperty(ServerDataProvider.JCO_GWSERV, rfcServerInfo.getGatewayServer());
serverProperties.setProperty(ServerDataProvider.JCO_GWHOST, rfcServerInfo.getGatewayHost());
serverProperties.setProperty(ServerDataProvider.JCO_PROGID, rfcServerInfo.getProgramId());
serverProperties.setProperty(ServerDataProvider.JCO_CONNECTION_COUNT, maxConnections.toString());
//XXX: We have to get this to work or else the server will not restart correctly
//More on this later.
//serverProperties.setProperty(ServerDataProvider.JCO_REP_DEST, "custom destination");
markviewDataProvider.setServerProperties(serverName, serverProperties);
// Get back the configured server from the factory.
JCoServer server;
try
server = JCoServerFactory.getServer(serverName);
catch(JCoException ex)
throw new RuntimeException("Unable to create the server " + serverName
+ ", because of " + ex.getMessage(), ex);
// rfcRepository is a singleton that contains
// repository = JCo.createCustomRepository(name);
// and methods to add structures to the repository
server.setRepository(rfcRepository.exposeRepository());
// add in the handlers, start the server
========================================================
So...the first issue is this: if I set ServerDataProvider.JCO_REP_DEST to anything, the program won't run because
it looks for the repository host connection info in a text file with that name, just like the example code does.
According to the javadoc, custom repositories don't have a destination, so it seems this property should be NULL.
Yet if I leave that property null, it works fine...until I need to stop the server (or, I get the same error when
the above code runs again on restart, as the JCoServerFactory.getServer code runs in both places - tries to refresh
a server that survived the restart as it failed to shut down due to the error).
For completeness, the shutdown code essentially reads:
=========================================================
JCoServer server = JCoServerFactory.getServer(serverName);
server.stop();
=========================================================
Then what happens is this:
java.lang.NullPointerException
        at com.sap.conn.jco.rt.StandaloneServerFactory.compareServerCfg(StandaloneServerFactory.java:91)
        at com.sap.conn.jco.rt.StandaloneServerFactory.getServerInstance(StandaloneServerFactory.java:116)
        at com.sap.conn.jco.server.JCoServerFactory.getServer(JCoServerFactory.java:56)
        at com.markview.integrations.sap.gateway.sap2mv.JCoServerController.destroy(JCoServerController.java:310)
I decompiled and debugged StandaloneServerFactory and I'm seeing this in compareServerCfg:
=========================================================
        key = "jco.server.repository_destination";
        if(!current.getProperty(key).equals(updated.getProperty(key)))
            return CompareResult.CHANGED_RESTART;
        } else
            return CompareResult.CHANGED_UPDATE;
=========================================================
Clearly, if getProperty() returns null, the .equals is going to raise NullPointerException, so this appears to be
the cause of that error. In other words, if this code runs, I'm going to have this problem because the property
needs to (seemingly) be null for my program to run at all.
Any insights on how to fix this / work around this would be greatly appreciated!
Thanks in advance,
Corey

<div style="width:58em;text-align:left">
Whoa, a long posting and I'm not sure I read it thoroughly enough to fully understand your problem - so please be patient with me if any comments are silly...
Your RFC server program provides an implementation for your own ServerDataProvider. If you reference a repository destination the default DestinationDataProvider implemented will look for a file name with the repository and extension .jcoDestination. If you don't like this behavior you simply need to provide your own implementation and register it, same as you did for the server data.
According to the javadoc, custom repositories don't have a destination, so it seems this property should be NULL.
Not sure where you found this. I'm assuming that you're talking about com.sap.conn.jco.JCoCustomRepository, which can of course be backed by a destination, i.e. see the comments in method setDestination:
<div style="text-align:left">Set the destination for the remote queries.
If the requested meta data objects are not available in the repository cache, i.e. not set by the application, the remote query to the specified destination will be started. Default value is null meaning the remote queries are not allowed.
Note: As soon the destination is provided, the repository can contain mixed meta data - set statically by the application and requested dynamically from the ABAP backend.</div>
I usually prefer using a connection to a backend providing the meta data instead of hard coding the meta data insertion into a custom repository. As the data is cached this introduces an acceptable overhead for retrieving meta data for long running server programs.
Anyhow, when you create your custom repository via JCo.createCustomRepository(java.lang.String name) you obviously must give it a name. That's the name I'd expect in the server data as a reference for your repository (property ServerDataProvider.JCO_REP_DEST). However, if your custom repository is not backed by a complete online repository you obviously have to ensure that all meta data is already provided.
So for testing it might be interesting to see if adding a JCoDestination to your custom repository helps. Another option might be to enable tracing and see what goes wrong...
Cheers, harald
</div>

Error when querying OLAP data with BI answers

Have been doing all the Lessons in "Using Oracle OLAP With Oracle BI Enterprise Edition 10g Release 3". Got till lesson 3 where I'm supposed to query the data with Answers but If I add any of the facts to the report, I get the following error:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17003] Oracle gateway error: Unsupported data type 101. (HY000)
SQL Issued: SELECT Customer."Ship To" saw_0, Measures.COST saw_1 FROM Global ORDER BY saw_0
So I was wondering if anyone knows what the catch could be.
Thanks in advance!

Yes. Me too. I have the same issue and I don't find any information about it. Could anyone help ?

Best Practice for Enterprise Repository Layout

We recently moved to 6i R2 non-versioned from 2.1.2. We have several projects that use the repository for development in various business areas of the agency. We have 100+ application containers and only 5 active projects at this time. Many of the containser were built to hold subject area entity objects and not designed for a project application. As a result we now have a web of shares back and forth between all of these applications.
My goal is to "clean up" this layout and move the repository in the direction of a limited number of application containers for subject area "enterprise" objects and individual application containers for each project development task.
One of my main concerns is how best to move several application objects to one application container and then what impact will this limited container structure have on application projects once we turn versioning on later this year. (I would really like to limit or end the use of shares/shortcuts if possible....)
Any advice for configuring an enterprise repository structure would be very helpful! Also, what impacts or gotcha's I need to be aware of once we have the structure in place and turn on versioning...
Sorry this is a long winded question :-}
Thanks ;)
Laurie

Laurie,
There is some good news for you: in Designer 6i, shares are no longer needed to be able to have references between objects ni different folders/application systems.
Previously in Designer 2.1 and 6.0 you could only have references from Object X to objects in other application systems if these objects were shared into the application system that owned the object X. If you moved Object X to a different Application System Y, all objects that X had references to were shared to Y.
All of this no longer exists. Object X in Application System A can have references to objects in any other Application System, without having to create shares or short-cuts as I call them in the context of 6i. Existing short-cuts (created by the migration for example) may be removed, especially if the only reason for their existence is to support a reference across application systems. Short-cuts are now only needed for reasons listed in the paper (Interior Designer) you referred to (e.g. quick navigation or clear insight in dependencies).
Moving objects between application systems will not create Short Cuts in Designer 6i. You also do not have to generate forms again if you moved the module definition or one of the objects used by the module. Moving has no effect whatsoever on the actual contents of objects or values of properties. It only affects the repository structure, the composition of folders and potentially the access users have to objects, since that is organized by folder.
One thing you do need to be aware of: if you are in the context of a workarea that contains an object X with a reference to object Y, and object Y is not in the workarea, you have a so called External Reference (also known as Dangling Reference). The consequence is that your object X is almost invalid: you can look at it, but you cannot generate it; you may also have a problem updating the object as long as it has these dangling references. In general, only update and generate objects that do not have dangling references. Note: the RON has the External References tool to find out about dangling references. This tool also allows you to include objects into the workarea, to resolve dangling references.
best regards,
Lucas

Error In Query Level export with multiple conditions

When i am running the following Query for Export with i am getting the result.
C:\Documents and Settings\ITL>exp scott/tiger@orcl tables=(emp) QUERY='"WHERE deptno > 10 and sal !=2850"' LOG=log011.log FILE=exp.dmp
Export: Release 10.2.0.1.0 - Production on Wed Jan 30 10:01:27 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
. . exporting table EMP 10 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.
But When I run with The following condition then it shows the following error...
C:\Documents and Settings\ITL>exp scott/tiger@orcl tables=(emp) QUERY='"WHERE deptno > 10 and job!='CLERK' "' LOG=log011.log FILE=Exp01.dmp
LRM-00111: no closing quote for value ' LOG=log01'
EXP-00019: failed to process parameters, type 'EXP HELP=Y' for help
EXP-00000: Export terminated unsuccessfully
C:\Documents and Settings\ITL>exp scott/tiger@orcl tables=(emp) QUERY="WHERE deptno > 10 and job!='CLERK'" LOG=log5.log FILE=exp01.dmp
LRM-00112: multiple values not allowed for parameter 'query'
EXP-00019: failed to process parameters, type 'EXP HELP=Y' for help
EXP-00000: Export terminated unsuccessfully
Please suggest a solution for it.

966523 wrote:
Padma.... wrote:
Hi,
The single quotes used for CLERK are causing the issue most probably.
C:\Documents and Settings\ITL>exp scott/tiger@orcl tables=(emp) QUERY='"WHERE deptno > 10 and job!='CLERK' "' LOG=log011.log FILE=Exp01.dmp
try replacing with this
C:\Documents and Settings\ITL>exp scott/tiger@orcl tables=(emp) QUERY='"WHERE deptno > 10 and job!=''CLERK'' "' LOG=log011.log FILE=Exp01.dmp
Two single quotes(not double quotes) in the place of one single quote for CLERK.
Thanks
Padma...Thanks A Lot...if/when you place all inside control file, then you do not have to worry about such complications

Service Bus(OSB) not harvesting Endpoint to Enterprise Repository(OER)

Hi,
I am harvesting a WSDL-based HTTP Proxy Service from Oracle Service Bus (OSB) to Oracle Enterprise Repository (OER) but the Endpoint is not harvested. The other artifacts are harvested successfully.
Can someone please help
Thanks,
Umar

Hi Anuj,
Here is the info you requested:
*1. Exactly which version of OSB and OER are you using?*
OSB version: Oracle Service Bus 11.1 Sun Dec 18 03:49:34 PST 2011 1447174
OER version: Oracle® Enterprise Repository 11.1.1.6.0 (v11.1.1.6.0-111103_0001-1437995)
*2. What type of proxy services are you publishing?*
Proxy Type: Web Service - SOAP 1.1 (WSDL:OSB_PR_POC/OpenAccount, port="OpenAccountServicePort")
My proxy service routes to business service.
*3. If it is a WSDL based proxy then are you able to see enpoint URL in exported WSDL from proxy?*
OSB shows the Endpoint information(Endpoint URI /OSB_PR_POC/PS_OpenAccount)
I don't exactly understand what you mean by 'exported WSDL'
*4. Did you harvested the configuration from OSB machine itself?*
The OSB and OER are on the same machine. Used the OSB command line harvester to harvest the project. So, Yes, harvested the configuration from OSB machine.
*5. Can you provide the harvesting log?*
Please find below the logs:
E:\Oracle\Middleware\Oracle_OSB1\harvester>"C:\PROGRA~1\Java\JDK17~1.0_0\bin\java" -Dweblogic.home="E:\Oracle\MIDDLE~1\WLSERV~1.3" -Dosb.home="E:\
Oracle\MIDDLE~1\ORACLE~2" com.oracle.oer.sync.framework.Introspector -harvester_home "E:\Oracle\MIDDLE~1\ORACLE~2\harvester"
log4j:WARN No appenders could be found for logger (org.apache.axis.i18n.ProjectResourceBundle).
log4j:WARN Please initialize the log4j system properly.
+0 [main] INFO com.oracle.oer.sync.framework.MetadataManager - Oracle Enterprise_Repository_Harvester version: v11.1.1.6.0-111020_0001-1434818+
+250 [main] INFO com.bea.alsb.harvester.container.OSBInstance - OSB Harvester created a temporary directory (C:\Users\c74945\AppData\Local\Temp\3\OS+
B11gConfig) for the configuration framework data. This directory will not be automatically deleted.
+<Aug 29, 2012 12:03:21 PM AST> <Info> <OSB Offline> <BEA-000000> <Initialing ALSB in offline mode. Install dir: E:\Oracle\MIDDLE~1\ORACLE~2 config dir+
+: C:\Users\c74945\AppData\Local\Temp\3\OSB11gConfig>+
+<Aug 29, 2012 12:03:23 PM AST> <Alert> <OSB Security> <BEA-387042> <There is no user password credential mapper provider configured in your security r+
ealm. Oracle Service Bus service account management will be disabled. Configure a user password credential mapper provider if you need OSB service acc
ount support.>
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "Resource SDK".>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "Resource SDK" initialized.>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "Custom Resource SDK".>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "Custom Resource SDK" initialized.>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "XSLT Resource".>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "XSLT Resource" initialized.>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "XML Schema Resource".>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "XML Schema Resource" initialized.>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "MFL Resource".>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "MFL Resource" initialized.>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "WS-Policy Resource".>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "WS-Policy Resource" initialized.>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "WSDL Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "WSDL Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "XQuery Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "XQuery Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "JCA Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "JCA Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "XML Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "XML Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "Archive Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "Archive Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "JNDI Provider Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "JNDI Provider Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "SMTP Server Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "SMTP Server Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "Proxy Server Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "Proxy Server Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "Global Settings Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "Global Settings Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "UDDI Registry Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "UDDI Registry Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397037> <Initializing Proxy Service Repository>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397038> <Proxy Service Repository Intialized>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397039> <Initializing Business Service Repository>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397040> <Business Service Repository Intialized>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "FLOW Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "FLOW Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "Resource SDK".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "Resource SDK" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "Custom Resource SDK".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "Custom Resource SDK" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "XSLT Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "XSLT Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "XML Schema Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "XML Schema Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "MFL Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "MFL Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "WS-Policy Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "WS-Policy Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "WSDL Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "WSDL Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "XQuery Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "XQuery Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "JCA Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "JCA Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "XML Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "XML Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "Archive Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "Archive Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "JNDI Provider Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "JNDI Provider Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "SMTP Server Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "SMTP Server Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "Proxy Server Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "Proxy Server Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "Global Settings Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "Global Settings Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "UDDI Registry Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "UDDI Registry Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <Monitoring> <BEA-000000> <New Metadata version is 0>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "FLOW Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "FLOW Resource" started.>+
+<Aug 29, 2012 12:03:28 PM AST> <Info> <ConfigFwk> <BEA-390020> <Config Service is initializing for the first time>+
+<Aug 29, 2012 12:03:28 PM AST> <Info> <ConfigFwk> <BEA-390021> <Creating out-of-the-box location: Project System>+
+<Aug 29, 2012 12:03:28 PM AST> <Info> <ConfigFwk> <BEA-390021> <Creating out-of-the-box location: Project _static>+
+<Aug 29, 2012 12:03:28 PM AST> <Info> <ConfigFwk> <BEA-390021> <Creating out-of-the-box location: Project default>+
+<Aug 29, 2012 12:03:28 PM AST> <Info> <ConfigFwk> <BEA-390021> <Creating out-of-the-box location: Folder System/JNDI Providers>+
+<Aug 29, 2012 12:03:28 PM AST> <Info> <ConfigFwk> <BEA-390021> <Creating out-of-the-box location: Folder System/Operator Settings>+
+<Aug 29, 2012 12:03:28 PM AST> <Info> <ConfigFwk> <BEA-390021> <Creating out-of-the-box location: Folder System/Proxy Servers>+
+<Aug 29, 2012 12:03:28 PM AST> <Info> <ConfigFwk> <BEA-390021> <Creating out-of-the-box location: Folder System/SMTP Servers>+
+<Aug 29, 2012 12:03:28 PM AST> <Info> <ConfigFwk> <BEA-390021> <Creating out-of-the-box location: Folder System/UDDI>+
+<Aug 29, 2012 12:03:28 PM AST> <Info> <ConfigFwk> <BEA-390022> <Creating out-of-the-box resource: Operations System/Operator Settings/GlobalOperationa+
lSettings>
+8393 [main] INFO com.bea.alsb.harvester.plugin.reader.OSBReader - OSB Config Jar Import / Validation starting.+
+10452 [main] INFO com.bea.alsb.harvester.plugin.reader.OSBReader - OSB Config Jar Import / Validation complete.+
+61402 [main] INFO com.oracle.oer.sync.framework.MetadataManager - Successfully completed the harvest+
Starting OERWriter Shutdown and Clean up...
Let me know if you need anymore info.
Thanks.

No Enterprise Repository View

I'm new to the Eclipse platform and I'm trying to publish a Crystal Report to our Enterprise Repository. As I understand from the documentation for Crystal Reports for Eclipse, I should be able to go to Window>Show View> Other, expand the Crystal Reports folder and click on Enterprise Repository. However, I see no sign of it.
I'm running:
Windows XP SP3
Eclipse 3.5.0 build I20090611-1540
Crystal Reports for Eclipse v. 2.0.6.r916
I tried doing this with no project open, with a Crystal Reports Java project open (but no report), and with a report open.
Thanks!

Thanks, Ted.
I located that documentation from within Eclipse by going to Help and clicking on Help Contents. That opened the help window with all of the documentation listed. Here's the path down the document tree I took to get to page I was talking about:
Crystal Reports for Eclipse Designer Guide>Printing, Exporting, and Viewing Reports>Distributing Reports>Working with Enterprise folders>Editing managed Crystal reports>To open a managed report from an Enterprise folder
Here's what that page says (just in case you have trouble finding it):
To open a managed report from an Enterprise folder
1. On the Window menu, point to Show View and click Other.
2. In the Show View dialog box, expand Crystal Reports and click Enterprise Repository View.
If you have not already logged on to BusinessObjects Enterprise, the Log On to BusinessObjects Enterprise dialog box appears.
3. In the Systemfield, enter or select the name of the BusinessObjects Enterprise system that you want to connect to.
4. Enter your user name and password.
5. Click OK.
The Enterprise Repository View folders appear.
6. Double-click a report name to open it in the Crystal Reports Designer.
Tip: You can also right-click a report name and from the context menu, click Open or Open With.
7. Make changes to the report.
8. On the File menu, click Save to save the report back to the Enterprise Repository View.
Thanks for the help

Converting strings with line feeds to a single line with identifying chars

Hi, I dont want to re invent the wheel if there is something out there that does this already. I want to take some string with multiple
line feeds and convert it to a single line. For example:
"I want this string
to be changed to
a single line"
to this...
"I want this string\r\n to be changed tor\\n a single line"

vsekvsek wrote:
OK, Hope this will make better sense. So right now a I have a routine that loads files like below:
"TEST\r\n TEST1\R\n TEST2"It's not clear to me at this point what you mean by that string.
After the initial word TEST, does that string have a backslash character followed by an r followed by another backslash followed by an n? Or does it have a carriage return followed by a line feed. (\r followed by \n)
We format it when loading in a way that it will look like this when queriing from the DB
"TEST
TEST1
TEST2"It doesn't look like anything "when querying from the DB." That part doesn't make any sense.
Either the string has a backslash followed by an r, in which case when you render in in a text editor or on a console it will look like a single line with a visible backslash character followed by an r, or it has a carriage return (\r) in which case it will look like multiple lines when rendered in a text editor or on a console.
Later I re-extract it to a file from the DB and What confuses me is when I inspect the string it looks like this
"TEST\r\n TEST1\R\n TEST2"How are you inspecting it? If it's in a debugger or similar tool, it's not uncommon for it to be showing a carriage return character (\r) as a visible backslash followed by an r, rather than interpreting it and rendering a new line. This is so that you can see exactly what characters are in there, rather than wondering about the specific whitespace.
>
but it extracts to my file like
"TEST
TEST1
TEST2"
So I guess there are some hidden cr's or something messing it up that I need to manipulate but not sure how to apprach it?I still don't know what you're trying to do, or if you even have an actual problem with your data or are simply not understanding what you're seeing.

Query in line with Enterprise Repository

Similar Messages

Maybe you are looking for