Query is dispalying different output in BEX and Web

Hi,
I am getting the correct output when i am running the standard query 0CQM_PCQMCCSI_Q0001 in the BEX analyzer.I am getting the wrong output if i run the same query through web.
It is displaying the different key figure and characteristic in the output which is not defined in the query.
If i copy the same query as Z query and execute it ,it is working fine in both BEX Analyzer and Web.
Kindly suggest me regarding this.
Thanks & Regards,
Sangeetha.A

Check your dataprovider assignments in your Web Query in your web items check charecteristics assignments

Similar Messages

Query output using BEX and web analyzer

Hi all,
I have an issue while designing a query in query designer.......I have a sales cube in which sales for every month is reflecting .....Now i have to design a query to show month wise sales....
But for some months if there is no sale record in the sales cube for that particular month like Feb 2006, when i execute the query on this month using BEX or web analyzer , it simply says "No data Found"..............
I want to show 0(zero) in sales quantity instead of this message.....Please guide me that how can i replace this message with zero value.
regards
Hina

Dear Hina Zakir,
<b>This is the BI 7 Query designer solution...........</b>
if u want to disply even if the value is Zero then goto the query properties not the single key figures go to the entire quer property and then click the Row/columns in that Suppres Zeros in that select Do Not Suppress + Effect on Tab is there in the Select Row or column or both ................then u can ablet to c the values as Zeros..
Regards
venu

Changes in Bex and web page when adding a new hierarchy...

Currently when we add a new hierarchy - we need to make a change to both the hier workbook in BEX as well as the web page.
can any body help me what are the new changes?..
Thanks in advance.
Bala.

Bala,
To my understanding only if you use the hierarchy then you have to make changes otherwise it is not necessary.
Run the Workbooks and Web Pages and check out whether you are getting any problem.
Regs
Gopi.

SQL Query taking the different time in Production and Development Env.

Hi All,
Following is the query which is hitting mainly two tables. SA_ORDER & AC_INVOICE.
My Production and Development both has same amount of data. But in Development env. it is just taking 5 secs. to execute but in Production Env. its handing.
I have also execution plans of both env. The difference is in development env. it is showing some view i.e. SYS.VW_NSO_1 which is not getting used in Production env.
And one more input is in Production Env, I don't have DBA privileges.
What setting will I have to make to resolve this performance problem in Production Env. ?
Here is the QUERY:------------
SELECT distinct A.GL_COMPANY_ID,
A.CUSTOMER_GROUP_ID,
A.CUSTOMER_GROUP_NAME,
A.INVOICE_ID,
A.ORDER_ID,
B.ORDER_NAME,
A.CUSTOMER_ID,
A.CUSTOMER_NAME,
c.order_name parent_order_name,
A.INVOICE_DATE,
A.DUE_DATE,
A.TOTAL_INVOICED_AMOUNT,
A.TOTAL_PAID_AMOUNT,
A.CREDITED_AMOUNT,
H.write_off
from ac_invoice a,
sa_order b,
(select parent_invoice_id, sum(total_invoiced_amount) write_off
from ac_invoice
where invoice_type_id = 3
group by parent_invoice_id) H,
(select order_id, order_name from sa_order where order_type_id in (3)) c
WHERE a.order_id = b.order_id and a.invoice_id = H.parent_invoice_id(+) and
b.parent_order_id = c.order_id(+) and
a.invoice_id NOT IN
((SELECT invoice_id
FROM ac_invoice
WHERE parent_invoice_id IS NOT NULL AND invoice_type_id != 3)
UNION
(SELECT parent_invoice_id
FROM ac_invoice
WHERE parent_invoice_id IS NOT NULL AND invoice_type_id != 3)) and
A.GL_COMPANY_ID = 1 and UPPER(A.customer_name) like upper('%KTLA%')
and
invoice_type_id in (1, 3, 4, 5, 2) and a.invoice_status_id = 1
ORDER BY A.INVOICE_ID

Please follow the advice in [url http://forums.oracle.com/forums/thread.jspa?threadID=501834&tstart=15]this thread for both your development and production environment.
Regards,
Rob.

Different output when saving and converting Word documents

Hi,
I have some issues with images when converting some Word documents to PDF and I hope someone can enlighten me :-). If I convert the Word document by simply right clicking on it and selecting the option to Convert To Adobe PDF, it will create a file that is mostly fine, with the exception of some of the images which are being split into segments, making the image text unreadable.
However, if I save the file as PDF in Microsoft Word (both 2010 or 2013), then I have no such an issue, since the image is not being split into segments and the text is perfectly readable. I have also attached some examples, see below. Ideally I would like to be able to convert several Word documents at once, and saving each documents in Microsoft Word would be too time consuming. Any help on this, will be really appreciated.
1) Converting to PDF, the image is split into segments and the text is unreadable
2) Saving as PDF in Word, does not split the image and it retains the original quality and readable text

Hi Linuxxo,
If the issue is not fixed with the option suggested by Rave.
We would need the files for investigation. Request you to share your email id for correspondence.
In addition please share which version of Acrobat are you using?
Regard’s ,
Reetika

Multiple Column Header in Report (BEx and Web Reporting)

Hi All,
        I've a requirement where my reports is having multiple column header.
   To be precise the column header is further divided into many sub-columns (upto 4 levels).
Structure cannot help in this case since we have more than 2 such columns and we are using web reporting as well.
Here is how it looks
                         <b>Header-A</b>
Header-B1   |   Header-B2   |   Header-B3    | Header-Bn
Hdr-C1 |Hdr-C2 |Hdr-D1 |Hdr-D2 |Hdr-E1 |Hdr-E2 |Hdr-Fn..
The above is a sample header structure.
This report will be a Web Based report and I need to know whether its possible to do it in BEx also.
We are not using Crystal Reports.
If there is any document related to this, please mail to
[email protected]
Thanks & Regards,
Chandran Ganesan

Hi Chandran,
I hope i am getting your problem right.
If your
Header-B1 | Header-B2 | Header-B3 | Header-Bn
Hdr-C1 |Hdr-C2 |Hdr-D1 |Hdr-D2 |Hdr-E1 |Hdr-E2 |Hdr-Fn..
are a set of key figures, then there is an option.
For example:
You drag Header-B1,Hdr-C1 |Hdr-C2
into column section.Right click on Hdr-C1, Hdr-C2 and select down under. So your Hdr-C1, Hdr-C2 will be under
Header-B1.
Like wise drag Header-B2,Hdr-D1,Hdr-D2
Right click on Hdr-D1,Hdr-D2 and say Down under and these two will fit below Header-B2.
You can repeat the above steps for Header-B3... Header-Bn
The output will be same as the one you have specified above.
Hope it helps,
Regards,
Parth.

Different order menu c/s and web

On client-server my own menu items are between View and Window.
On the web my own items are at the end after Help.
I want them at the same place as c/s.

Gerrit,
The order in which menu's are shown differs between C/S and Web deployment. You need to open the generated mmb and change the order manually.
Hope this helps,
Jacques

Web Access and Web Services

What are the different between p6 WebAccess and Web Services?

I think I realise what the problem is....
It's because the Nokia (and Opera) are *proxy* browsers, meaning that they don't use the router to make the internet calls to pages, but they let another service do the work (presumably Nokia). The penny dropped after reading another thread where content was restricted by the router, but the mobile phone was able to connect to restricted sites - and I tried that scenario out too!
This also means that this remote proxy service can not see anything on your own LAN - obviously!
This is good for viewing internet sites via your mobile provider as they compress the data, meaning less data returns to you - but I don't see why this is necessary when using Wifi.
I've tried installing other browsers too - and they seem to be the same.
I'm rather disappointed by this.

My background image isn't lining up between my design, preview, and web preview. HELP!

I'm new to using Muse and have spent the afternoon going through online tutorials etc. I understand the fundamentals of adding an image to use as a background, but when I upload the image, it lines up completely different in design, preview, and web preview screens. I've been playing around with different settings but I can't for the life of me figure how to make my preview and web preview look like my design page.
Below are design page, preview page, web preview.
I'm sure there is some fundamental piece I'm missing here as I can't seem to find any threads with the same question being posed. If I had hair, I'd be pulling it our right about now.

1) Resize your image in Photoshop to the maximum width you require for browser display (probably ~1600px, but certainly less than than 2560px) and use Save for Web to create a JPEG of it with the lowest JPEG quality rating you can stand (or your initial page load times will be slow) and import that back into Muse. (The most likely reason the Muse Preview is blank is that this image is too large, in terms of number of total number of pixels.)
2) In the Browser Fill panel in the Fitting options popup menu choose "Scale to Fill". Scale to fill will scale the image up proportionally such that none of the black background shows. If the aspect ratio of the browser window is different than the image, then a portion of the width or height of the image will be cropped. What portion is determined by how the image is aligned using the "Position:" control in the Browser Fill panel.
Because browser window sizes vary (since they're user resizable) the display of the image will be different than what is seen in Muse Design view. However, the letterboxing/pillarboxing effect in the screenshot you provided is due to the Fitting Option being set to "Scale to Fit" rather than "Scale to Fill".

Ad hoc query - Infoset, after selection it is giving two different output

Hi All,
We are facing problem in ad hoc query, after PQAH Ad hoc query, when we go to one infoset, so after making some selection and putting some output field,
When we click on refresh data button(in lower pane) so it gives only one record, which is incorrect, but when we click on u2018Start Outputu2019 button it gives 3 records those are correct.
Can anyone tell me, why this is giving different output.(first time 1 record, and second time 3 records) record 3 output is correct.
Regards,
Kumar
Edited by: kumar r12 on Mar 18, 2011 9:00 AM

Hi Kumar,
Are you looking at the "Hit List" or the output of the results in the lower pane? The hit list will only give you the number of persons who will be in your output. The refresh button should give you a preview of the output.
What persons or fields are different or not shown in the preview area vs. the output? Also, what are the dates for the data? Are you looking at current data or looking for history? The output may be showing you history and the preview only current data. Most concerns with Ad Hoc Query output are related to dates - for the selection and the output.
Paul

Different output for Sales Document and billing

Hi,
here is the scenario, eg. in the sales document there are 4 line items. Item 10 and 20 are with material pricing group A, and Item 30, 40 are material pricing group B.
In the invoice, customer would like to combine the pricing of items 10, 20 (Material Pricing Group A) into one. Which means there will be only 3 line items in invoice , first line item will be the total pricing of item 10 and 20.
The 2nd and the 3rd item in invoice will be the same ones in sales document.
how am I able to do that ?

Hi - please re review with what the customer wants - output wil always be fr the different parts being billed and not for price group combination -
ifyou still want summary at price group level, then you will need to ask your ABAP developer to see if he / she can combine like that - in such case, which part number would you show in the output?
there seems to be a lot of confusion inthe requirment -
cheers
nandu

Different Output of the template from Template Builder and Oracle Apps.

Hi,
I have created a template with a page layout of 11" X 17" this template has around 18 columns.
When i load the XML data and run it from XML Template builder 5.6.2 the output is fine but when I run it through oracle applications i get different output basically the output from oracle applications comes in 7 pages (First page has half page output , 2 nd page has 3/4th page output.....) where as from XML template builder the output comes in 6 Full pages.
Wher am i going wrong.
Thanks in Advance.

The output is in PDF format.

How To Guide : Impact of a BEx query change to universes and WebI document

Ever wondered about the impact of a BEx query change to your universes and Intelligence documents ? "If I change this, will I need to refresh the universe structure ? will my Web Intelligence documents break ?". This article aims at clarifying these questions for Web Intelligence documents that use OLAP Universe(s) based on BEx query(ies). More specifically, it clarifies which BEx query change does impact Universes and Web Intelligence documents and which one is transparent to them.
The first part of this article provides a summary table. The second part explains what to do to make the universe and Web Intelligence documents reflect the BEx query change. And finally, it covers each change scenario in details with more explanation and screen shots.
[http://wiki.sdn.sap.com/wiki/x/0wt9DQ|http://wiki.sdn.sap.com/wiki/x/0wt9DQ]

Hi Rajesh J Salecha,
What I understood is like :
You have two queries and both gives same results but one of the query having a parameter.
You have one report which is using query1. Now you want that report to be copied as Report2 and use Query2 instead of Query1.
If the this is the issue, then you copy Report1 as Report2 and go in Database and change the Data source location to Query2.
Hope this will help you. If my understanding is wrong then give us the work flow.
Thanks,
Sastry

Acrobat DC and XI different Output preview; same setting on the same machine

Hello,
I've got an question regarding Output preview
My sample PDF does have different output preview values on Acrobat DC (100% Black) and Acrobat XI (CMYK values)
Both use the same setting (Euroscale Coated v2), doc has no PDF/X output intent
Still..... it's strange that on one Mac the PDF does look different....
What's going wrong?
Kind regards

Numerous fixes went into color display on MacOS for Acrobat DC as well as in Output Preview in general. That having been said, I don't recall any changes that would have resulted in the phenomena you are seeing.
I assume you were clicking on the “black” circle to get you sample color values? And what do you believe should be the correct values? CMYK=(0,0,0,1) or CMYK=(0.8,0.64,0.67,0.75)?
If you can post a copy of this file, we can examine it to see what is going on.
- Dov

Cd c:\java gives me different output and javac doesnt work

Dear friends;
once I type cd c:\java it gives me different output and after that javac doesn't work
Like
javac filename.java
doesnt compile.
Any comments, please.
C:\Program Files>java
Usage: java [-options] class [args...]
(to execute a class)
or java [-options] -jar jarfile [args...]
(to execute a jar file)
where options include:
-client to select the "client" VM
-server to select the "server" VM
-hotspot is a synonym for the "client" VM [deprecated]
The default VM is client.
-cp <class search path of directories and zip/jar files>
-classpath <class search path of directories and zip/jar files>
A ; separated list of directories, JAR archives,
and ZIP archives to search for class files.
-D<name>=<value>
set a system property
-verbose[:class|gc|jni]
enable verbose output
-version print product version and exit
-showversion print product version and continue
-? -help print this help message
-X print help on non-standard options
-ea[:<packagename>...|:<classname>]
-enableassertions[:<packagename>...|:<classname>]
enable assertions
-da[:<packagename>...|:<classname>]
-disableassertions[:<packagename>...|:<classname>]
disable assertions
-esa | -enablesystemassertions
enable system assertions
-dsa | -disablesystemassertions
disable system assertions
C:\Program Files>

That error means that the file does not exist or you got the filename wrong (which means it does not exist)...
recheck the location of your file and verify that it actually there...
Step 2, now that we know that the J2SDK1.4.2_03 is installed in C:\j2sdk1.4.2_03\bin...
We can now set you path... If you have an Windows 2000 or XP then check this link in the forum...
http://forum.java.sun.com/thread.jsp?forum=54&thread=491703&tstart=0&trange=15
So what you do is right click on My Computer (icon) which will give you a menu...
Select Properties at which point you will see the System Properties Dialog window...
Select the Advanced Tab (called Details in Win2000) Click on the Environment Variables button...
Which will open the Environment Variable Dialog window... then in the second little window labeled System Variables, select Path and click on the edit button...
you will now see the Edit System Variable dialog window...
in Variable Value goto the the end of that line (make sure that nothing is selected/highlighted), type
";c:\j2sdk1.4.2_3\bin
make sure that you include the semicolon...
click ok to make the change, and via the ok buttons exit System Properties...
reopen DOS and now you should be able to run Javac.exe anywhere...
Hope this helps...
-MaxxDmg...
-' He who never sleeps...'

Query is dispalying different output in BEX and Web

Similar Messages

Maybe you are looking for