Query is not picking up right data from the cube

Hi Bi expert,
I added one infoobject (0cust_group) on the cube and when I display data through manage option on RSA1 transaction, I can see that the infoobject nicely populated. But when running query, its coming under Not assigned customer group (s). Could you please help me on this matter? I have activated cube and update rule and even generated the query using transaction RSRT.
Thanks for your help.

How do you fill the customer group char in your rules?
1 - using master data of customer or 2 -datasource sending it from R3?
case 1:
check that 0customer attributes are filled and active ( objvers = A)
case 2: check it in r3 using RSA3 transaction, to see if it is extracting it?
derya

Similar Messages

Deleting Data from the cube

Is there any function module which drops all the data from the cube?
Or is there a function module which deletes all the requests from the cube?
Thanks.

Hello,
Check one of the foll:
RSAPO_DELETE_CUBE
RSAPOADM_CLEANUP_CUBE
RSAR_DELETE_ICUBE
RSAU_INFOCUBE_CONTENT_DELETE
RSDG_CUBE_DELETE
RSDPC_DROP_CUBE
RSDPM_DB_CLEANUP_CUBE
RSDPTEST_MOLAP_CUBE_CLEANUP
RSDPW_INFOCUBE_DELETE_ALL_DATA
RSDPW_INFOCUBE_DELETE_DATA
RSDPW_INFOCUBE_DROP
RSDP_MDMETA_ICUBE_DROP
Regds,
Shashank

Infospke not pulling data from the cube

Hi,
Though there is data in the cube ,when I say start extraction the infospoke is pulling zero records .But I see a file created but I am not able to see the data.In the monitor it says 0 record extracted.
I have done this first time in the new upgrade system where I changed the server name.
Thanks

Hi,
Check out the layout definition(Data column) for the corresponding planning level and also you can check the <b>planning area</b> value whether it corresponds to your cube name ..
Also make a cross check with the <b>listcube</b> for your corresponding restriction which you have made in planning level..
Regards,
Siva.

Customer Exit Variable to fetch the data from the cube..

Hello Gurus,
I am having a requirement to select the latest changed record from the cube while executing the query. where we are having the Calday as the date with a variable .
I suggested my client we can filter it at the DSO leve or Data loading level but my client dont want to distrurb the existing design so he want to perfrom the changes at the Query level only.
For Example we are having below records in the cube.
PO             Material     Calday       Qty         Price
101            ABC          1/12           100         10
101            ABC          2/12            100         10
101            ABC          3/12            100         11
I am having Calday in the selection screen as the variable.
Now from the above example i need to show the record which has been changed on 3/12.
For this i am planning to write the customer exit variable on the calday , when the user enter the range of Calday then i will fetch the whole records which fall in between the range and i will sort each PO with respect to the date and i will pick those which are the latest records.
My Concerns:
!. Kindly let me know if it is possible and what are the other things that i need to consider.
2. Did it will impact the performance.
Waiting for your quick replies
Thanks & Regards
KK

Hi Mate,
Sorry for late reply.
By d way in your word.
initially when the user enter the date range as the vairable input. suppose 1/12 to 31/12 then i will pick all those records which fall in this range.
suppose the records are
PO Date
P1 01/12
P1 02/12
P2 02/12
P2 03/12
P3 03/12
P3 04/12
In the customer exit variable Now for each PO i will sort the date in ascending order and i will pick the last record to display it in the Report.
The ouput will be
PO Date
P1 02/12
P2 03/12
P3 04/12
Now hope you are aware about exit variable concept.
so what value will pass in the calday filter.
here after sorting on each PO , you will get 3 different dates, 02/12 for P1
03/12 for P2
and 04/12 for P3
Now if you are aware about exit variable concept, then you will pass this three date to CALDAY(I_t_VAR_Range-low = ...)
but how query will understand that for P1 calday filter value is 02/12, for P2 calday filter value is 03/12.... and so on...
actually i have also experienced this kind of issue 1-2 years before, i have tried same thing at that time without thinking and stuck with this problem..
By d way you can also learn from your mistake.. so just try ur logic and then you will understand what is the problem?
By d way this will not work, parallel you can work on other solution.

Deletion of data from the cube

Hi,
In our sales cube i want to delete the raws from the cube where there is no data for invoice quantity.
Likewise in my material master i want to delete the raws without division.
Is there any permenant solution. I suppose we can write routine.Where should i write the routine ? i mean at update rule level or transfer rule level or start routine will be the best option.Which one will be faster and why ?
Regards,
Viren.

Hi,
I understood, that the records are already in the cube.
Selective deletion will not work because you can't select on keyfigure values.
So create records with RECORDMODE = R (Reverse Image) for these records you want to dissappear. Get the relevant records into a flatfile, upload these records with recordmode R with all keyfigures inverted. The incorrect values will the vanish.
A Deletion with recordmode = D is not possible for cubes.
For the Material-Records:
Within the updaterules, get the relevant Materialrecords into an internal table.
(SELECT * FROM /BI0/PMAT_SALES into itab_mat_del WHERE DIVISION is inital.)
For these MasterDatarecords: check in the sid-Table, if the relevant materialnumbers are in use already (Check Flags in the sid-Table).
loop at itab_mat_del into wa_mat_del.
select single * from /BIC/SMAT_SALES where
MATERIAL = wa_mat_del-material.
if CHCKFL is initial.
if DATAFL is initial.
if INCFL is initial.
If they are not used, the can be deleted by using the function module RSDMD_DEL_MASTER_DATA.
endif.
endif.
endif.
This should be implemented within the updaterules. (Didn't I said that already??)
hth
cheers
Sven
Message was edited by: Sven Muntermann

Show only logged in User Data from the cube

Hi,
Suppose I have couple of customers' data in the cube. And these customers are some BW users. Now, i wish my query should display data only for the customer/user who has logged in. The query could be created by any user.
Is this possible in a web report?
regards,
Sam

Hi
Refer this thread
Re: query execution statistics
The query execution statistics can be fetched from the relevant table that acts as source for your query
Regards
N Ganesh

Photosmart C4180 does not pick up 10x15 photopaper from the photo paper cassette

What can I do to get the printer to pick up 10x15 photo paper from the photo paper cassette? It wil only print when feeding one piece of photo paper at a time. This is tedious and annoying. No problems with ordinary paper.

Hello Mr. Wilks,
I am sorry to read about the issue you are having with your new Photosmart 6520 not picking up 4x6 paper. I understand you have cleaned the rollers and that did not resolve the problem. I have researched this and have found a couple of documents that I recommend you look at to ensure all of the print settings are correct when printing on a 4x6 or any other size you wish to print on.
I am unsure if you have a Windows or a Mac computer, therefore I will post 2 different links for you to look at depending on which operating system you have.
Here is the document for troubleshooting on Windows: Printing Photos Saved on Your Windows Computer
Here is the document for troubleshooting on a Mac: Print Photos Saved on Your Computer (Mac)
I really hope this helps you, feel free to respond if there is anything else I can help with!
Regards,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

SSRS pulls data from ESSBASE cube, data not showing

Dear Experts,
We are connecting SSRS 2012 to Essbase 11.1.3 to pull data from the cube, and having some issues with some members data not showing in the query designer and report, while some have no problem. And we couldn't find a pattern on which members won't show. We are wondering if this is a known issue and if there is a way to solve the problem.
Thanks very much.
Grace

Hi ,
Check the following:-
1 Check whether you have made the joins properly.
2 Check data at multiprovider level .
3 is data available for reporting in both the cubes
Regards
Rahul

I am not getting the data in Bex from the cube

Hi Experts,
i am not getting the data from the cube to Bex,
cube having the data, but i am not able to see this data in the Bex result area.
Can any one help me.
Best regards,
Bhaskar

Hi
In the manage cube, is reporting symbol is there for your requests
If you have any red requests delete them and refresh
If all requests having reporting symbols you may check the BEx without any filters or selection criterions
Regards
N Ganesh

ADF 11g can not select and copy data from cell of readonly table in IE

hi,
In ADF 11g, when render view object as readonly table with Single RowsSelection, using IE browser can not select and copy data from the cell, but it work in firefox.
is it a bug?
Edited by: kent2066 on 2009-5-18 上午8:46

Hi Timo,
Sorry forgot to mention versions.
We are using 11.1.1.7 and IE 9.
I tried in Google but could not get the solution.
Kindly let me know solution for this.
PavanKumar

Deleting data from a cube

Hi,
I added a info object to a dimension in a cube. now i want to delete the info object from the cube. But since the cube has data in it, i cannot do it unless i delete all the data from the cube. When i select 'delete data', i'm given 2 options, delete fact table only and 2nd option delete fact table and dimension table. what is the difference between the two and what option should i select.
i then need to load the cube back from ODS. the cude right now is setup in the proce4ss chain to do a delta load every day. would this be affected after i delete the data and load it again from the ODS?
Thanks
Sameer

The way I understand your question is...
1) You have data in the cube from which you have to remove an infoobject
Ans: To acheive this, you have to delete the data from the cube
2) You have deleted the data and then deleted the IO, activated the cube and the update rules from the ODS which feeds this cube
3) Now you have to reload the deleted data from the ODS. But you already did an init and you are loading delta's from this ODS to the cube through process chain.
Ans: As you've already deleted the whole data from the cube, do a full load from the ODS (you can do this even when delta initialization is done) to your cube by creating a new infopackage under the export datasource of the ODS. This will capture all the records from the ODS. Then to be on the safe side so as not to load any duplicate records...go the infopackage that you've used to do the full load (you can even create a new Info package)...SCHEDULER -> Initilization options for source system -> Delete the existing INIT -> Then do Init again...
Leave the delta infopackage as is and let the process chain take care of the deltas from now on...
Hope this helps. Let me know I am missing something here...

Deleting Data from SSAS CUBE

Hello Everyone,
I have a question, we developed a Basic Cube by building dimensions & Fact from the Source table(Everything in DSV, no Physical DIM and Fact Tables). Now everything goes well. The Source table will only have CUrrent day data.
My Question is: Need to delete particular day data from the cube without disturbing the Existing Data.
Eg: When I process the data on 31st of March, cube will have only 31st. But when I process 1st , 2nd data CUbe should have 31st +2nd data. 1st Dated data should be deleted from cube,when ever I process the data I just need month end data need to be stored
with current day data. all the other stuff should be deleted from the cube.
if I process the Cube on 1st of May, I should only have 31st March, April 30th and May 1st data.
Hope the Question is clear, please let me know.
Any help/suggestions would be appreciated.
Thanks In Advance.
Thanks, Please Help People When they need..!!! Mark as answered if your problem is solved.

Hi BKomm,
I Guess the only way to handle this scenario is by using partitions.
Create partitions for every last day of months + One additional partition for current_date.
your where clause for current_date partition should be somewhat like this
Where Date = current_date And Date <> Last_Day_of_current_Month
so that it does not duplicate data for the last day of current month.
Saurabh Kamath
Hello Kamat, I was looking for something else inorder to delete the existing data from a cube. But your Approach is far better than making it complex, it did not strike to my mind. Thanks will implement practically and check.
Thanks Again.
Thanks, Please Help People When they need..!!! Mark as answered if your problem is solved.

How to Fetch the Data from a Cube

Dear All,
We created a cube containing dimensions
Customer, Product, Branch, Activity, Time dimensions
using Oracle Analytical WorkSpace Manager.
Once Cube is created,
How can I see the Data existing in the Cube using normal SQL Queries ??? Through Analytical Workspace Manager Toll we r able to see the data. But our requirement is to see the data from the Cube using SQL Queries.
Regards,
S.Vamsi Krishna

Hey I got the Solution. It follows in this way :
A Cube is nothing but a Data Storage. Based on the Mapping we given it considers the data.
To fetch the data from the Cube -> we have to write the SQl Query as below :
     SELECT dealer_name,model_name,sales
     FROM TABLE(OLAP_TABLE('MDB.FINAL_AW DURATION SESSION',
     'DIMENSION dealer_name AS varchar2(30) FROM FINALDEAL
     DIMENSION model_name AS varchar2(30) FROM FINALMODEL'));
We can create View for the above statement o
we can apply group by ,rollup, etc etc clauses
and even we can write where clauses for the above select statement.
But now my doubt is :
can we apply any calculations while mapping the Level to an Dimension.
Generally we will map Level toa dimension as DBUSER.TABLENAME.COLUMN NAME
can we apply any calculation like :
MIS.PROPKEY020MB.MATURITY_DATE+2
Please help for the above.
If any wrong is there please let me know
Regards,
S.Vamsi Krishna
can we apply

Please Help - How to Fetch the Data from a Cube

Dear All,
We created a cube containing dimensions
Customer, Product, Branch, Activity, Time dimensions
using Oracle Analytical WorkSpace Manager.
Once Cube is created,
How can I see the Data existing in the Cube using normal SQL Queries ??? Through Analytical Workspace Manager Toll we r able to see the data. But our requirement is to see the data from the Cube using SQL Queries.
Regards,
S.Vamsi Krishna

You appear to have the wrong forum. This forum is for the Oracle Workspaces application, which is a component of Oracle Collaboration Suite.
Perhaps one of the forums in the database section will be more relevant:
http://forums.oracle.com/forums/category.jspa?categoryID=18
regards,
-Neil.

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt ‏2 KB
read_array.vi ‏21 KB

The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

Query is not picking up right data from the cube

Similar Messages

Maybe you are looking for