Query is not showing the values - authentication error

Hi,
After running a query it is not showing the values and showing <b>"You do not have the authorization for the selected component."</b>
Diagnosis
You do not have the authorization for the selected component.
System response
The selected component cannot be edited.
Procedure
lease speak to the person responsible for authorization, if you require authorization for the editing of this component. The function is protected by the object "Business Explorer - components" with the following fields:
InfoCube ZPLAYOPPT
Type of a component REP
Component PLAYBOOK_OPPT_1
Activity 16
  Notification Number BRAIN 800 
<b>Can u pls tell me the solution.</b>Thanks and Regards,
Giri.

Go to SU01, look at your authorization profile for which roles you are given. Then, go to PFCG and check out the roles and how they are defined. It is possible that you are not authorized to view application area, infocube, certain characteritics etc.
Hope this helps,
Regards,
Petter

Similar Messages

  • ME23n , Does not shows the values correctly in print preview

    Hi,
    When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
    For example;
    This is the vendor & its address.  (check attached image img1.jpg)
    ZERANDIB BUSINESS APPLIANCES
    Number-122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO-04
    When displaying the print preview, it shows only some parts of the above address
    Shows only; (check attached image img2.jpg)
    ZERANDIB BUSINESS APPLIANCES
    PO BOX 41,112,REID AVENUE
    These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
    I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
    In the above example, it is not showing Number-122/A and  COLOMBO-04 (Its a single word. No spaces there)
    If its like --> Number - 122/A   &  COLOMBO - 04 ,  then it will display in the print preview correctly (where there are spaces after - mark)
    check img3.jpg
    If its having more than one word, then it will display correctly in the print preview.  As below;
    ZERANDIB BUSINESS APPLIANCES
    Number - 122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO - 04
    If its 2 or more words, it shows correctly.
    If its 1 word, then its not showing!
    Why it is happening like that? Any ideas how to resolve this issue?
    regards.
    zerandib

    It turns out that this problem went away after the program crashed.  Everything seems to be working well now.

  • Why this query does not show the result?

    Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
    SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
    select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
    ERROR at line 1:
    ORA-00933: SQL command not properly ended
    SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
    no rows selected
    SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
    DATA_OBJECT_ID     OWNER                          OBJECT_TYPE
    69662              HR                                 TABLE
                       OE                                 SYNONYM
    SQL> SELECT USER FROM DUAL;
    USER
    SYS

    Hi,
    the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
    Herald ten Dam
    Superconsult.nl

  • Do not show the # values should be replaced with blank at report

    Dear All,
    There is a requirement do not show the null (#) values at report level for characterstics fro example for onedocument there is no notification type in report for that document it is coming with null value but i do not want that null value in report it should be blank
    any suggestions  please,mostly provide the information at report level,but at cube level any options at the time loading( through start routine)
    Thanks & Regards
    sathish

    Hi Satish,
      There is one tcode where u can keep ur symbol defined say blank  to show in report when null values occur... i didnt rememeber tcode i will tell you as soon i get it....
    but it will effect not only this query but all the queries so it is upto u....
    and at cube level u can write a routine to check ...
    if  this field value is initial .
       change it with blank
    else
      leave it.
    hope it helps...
    regards
    vamsi
    Edited by: vamsi talluri on Mar 15, 2009 10:33 PM

  • Value help on a published CR do not show the value help as an hierarchy.

    Hello experts,
    we published a CR based on a Bex Query to the BW role and to BOE. The parameters on CR are based on Bex Hierchy variables. If we logon with an SAP User (with SAP_ALL) on Info View/ BI Launch Pad to execute the CR the value help shows the hierarchy correctly.
    + world
      + North Amerika
      + Western Europe
      + Asia
    If we logon on to  Info View / BI launch Pad with a normal SAP Enduser (without SAP_ALL) but with all needed End User Roles the value help shows a flat List....
    World
    North Amerika
    Western Europe
    Asia
    We try to trace this authorization issue but we do not got any clearly results.
    Maybe someone knows the needed authorization Object on BW....?
    Regards Michael

    Hi,
    the authorizations are documented in the installation guide for the SAP Integration Kit and the authorization trace should show it as well
    ingo

  • Input ready query is not showing loaded data in the cube

    Dear Experts,
    In Input ready query we have problem that it is not showing the values which was not entered by throught hat query. Is any settings in input ready query that we can do to populate the loaded data on the cube as well as data entered through Input ready query itself.
    Thanks,
    Gopi R

    Hi,
    input ready queries always should display most recent data (i.e. all green and the yellow request). So you can check the status of the requests in the real-time InfoCube. There should exist only green requests and maybe at most one yellow request.
    In addition you can try to delete the OLAP cache for the plan buffer query: Use RSRCACHE to do this. The technical names of the plan buffer query can be found as follows:
    1. InfoCube\!!1InfoCube, e.g. ZTSC0T003/!!1ZTSC0T003 if ZTSC0T003 is the technical name of the InfoCube
    2. MPRO\!!1MPRO, e.g. ZTSC0M002/!!1ZTSC0M002 if ZTSC0M002 is the technical name of the multiprovider
    If the input ready query is defined on an aggregation level using a real-time InfoCube, the first case is relevant; if the aggregation level is defined on a multiprovider the second case is relevant. If the input-ready query is defined on a multiprovider containing aggregation levels again the first case is relevant (find the real-time InfoCubes used in the aggregation level).
    Regards,
    Gregor

  • Query to show the values of Keyfigures with above 200(201,202.....) as 200

    Hi all,
    query has to show the values of keyfigures with above 200(201,202.....) as 200.
    for example
    james         200
    willy           180
    Jhones       450
    kiris            204 and so on.
    the values above 200 that is 450 204 has 200 in the query output.
    Thanks,
    James

    Hi ganesh,
    Thanks for response.
    but assumption is wrong.
    the values below 200 also needed and the values above 200(400,204) has to show 200 in the output of the report.
    format before the output of the query.
    james 400
    kitty   200
    jhones 180
    francy  204.
    Now my output has to show
    james 200
    kitty   200
    jhones 180
    francy  200.
    I hope you can understand better now.
    Thanks,
    James

  • Filters not showing up values

    Hi Gurus,
       I am working on some reports in WAD.
       I have characteristic "Region" which has 4 values like EAST,WEST,SOUTH,NORTH. This is a User Entry so I created a variable for this and it shows the values with check boxes beside it when you click on the variable entry screen input help. Once I execute the query the result is displayed. When I click on the Filter ICON on the Navigation Block for REGION it is not showing the Values for this region but just shows only 4 check boxes.
    This Characteristic doesnot have master data. It is displaying the KEY values.
    For the characteristics which Master Data it is showing the values both in Varaible selection screen and also in Filter Selections.
    Please update me with a solution.
    Thanks,
    Raj

    have you tried replacing it with the file essbase.bak_startup file, instead of the older essbase.sec file?
    If you check your app folders you will still be able to see the cubes you had created its just that Essbase can't pull those up with the older .sec file.
    The essbase.bak_startup file is always updated everytime the Essbase server is started up.
    Be sure to take a backup of the file before starting up the server again.
    The reason your essbase.sec and essbase.bak files are both corrupt is because when you first discovered that the essbase.sec file is corrupt it was when you started the server up.
    What you need to keep in mind if the machine which holds the essbase server shuts down abruptly or crashes (which usually leads to the situation you are in) is to never start up the Essbase server right away, as you may have a corrupt essbase.sec file, and if you start up the server without taking a backup of the essbase.bak file you may risk corrupting the essbase.bak file as well.
    This is because at start up the essbase.bak file gets replaced with the essbase.sec file.
    let me know if this works.
    Regards,
    Anindyo

  • Error :cannot show the value of the filter.The Field may not be filterable or the number of items returned exceeds the list view threshold enforced by administrator

    Issue : In sharepoint 2013, I am experiening below error while using filter in the list view due to the number of items in this list exceeds the list view threshold, which is 10000 items. Tasks that cause excessive server load (such as those
    involving all list items) are currently prohibited.
    Error :cannot show the value of the filter.The Field may not be filterable or the number of items returned exceeds the list view threshold enforced by administrator
    Could you please suggest a way to avoid this issue apart from incrementing the list view threshold limit .
    Prashanth

    Reorganizing content, or creating more specific views. sharepoint is warning you that the content is structured in such a way that it can cause performance issues, which should be addressed in some way.
    Kind regards,
    Margriet Bruggeman
    Lois & Clark IT Services
    web site: http://www.loisandclark.eu
    blog: http://www.sharepointdragons.com

  • AFAR test run showing the values but not posting in Real run.

    Hi Friends,
    i have an issue with AFAR recalculating the depreclation. The details are as below;
    1. Asset value date is 15.07.2010. but ordinary dep. start date was set as 01.01.2010 manually by the user.
    2. The Period control method 11, the dep. is calculated for entire year for acquisition.
    3. we have already calculated depreciation from period 12 2010 to period 04, 2011.
    4. Now, we have changed ordinary depreciation start date for 5 asset records from 01.01.2010 to 15.07.2010.
    5. Therefore, we recalculated AFAR for these assets for 2010 and test run is showing the values for these 5 asset. The same was expected by the business.
    6. When we execute the real run, it is not posting and no change in asset explorer for period 12, 2010 or in current period. No error message is available in spool / job log.
    We have opened FI periods as well.
    My question is  that why the system calculating the values in test run and if it is calculated in test run, why it is not posting in update run?
    As per the period control method, the depreciation should not recalculated for half year even we change the ordinary dep,start date from 1st Jan to 15th July.
    I  request you to clarify my doubt and help me to understand the error which is stoping the values in update run of AFAR.
    Best Regards,
    Padmaja

    Hi,
    Sorry...it is not worked out. Alternatively, i tried the shift factor with variable depreciation and i achieved the values which appeared in AFAR test run.
    Thanks for the help.
    Regards,
    Padmaja
    Edited by: PadmajaCH on May 19, 2011 3:26 PM

  • The parameter 'host_name_full' of ICM not showing the right value

    Hi ,
    The parameter 'host_name_full' is not showing the correct value.
    It is still showing the value as fully qualified domain name, where as we have reverted the setting some time back .
    can anyone let me knwo from where does it pick up the value from .
    and how can i Edit the value to show the correct value
    Thanks
    Nikhil

    Hi Nikhil,
    Check this 2 links will be useful to u r query...
    http://help.sap.com/saphelp_nw04/helpdata/en/e7/7af83b0255a206e10000000a11402f/content.htm
    http://www.basisconsultant.com/modules.php?name=Content&pa=showpage&pid=12
    Regards,
    Sridhar

  • Field Explorer in Crystal Reports does not show the same names as Bex Query

    Hi
    I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
    In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
    It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
    I would like it to display the field explorer as shown in this blog.
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    Thanks in advance

    Hi,
    take a look here:
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
    Ingo

  • Creation of a Query to show the values for the current month and the last 12 months data.

    Dear All,
    Good day!
    I have to create a Query with the below requirement.
    I have to create a Query to show the values for the current month and the last 12 months data.
    Can you please guide me how to achieve this ??
    thank you,
    Regards,
    Hema

    Hema
    explain the exact problem..? as you mentioned you want to create query to show values for current month and last 12 months.. so I think you want to show values for 12 months from current data.. you can achive this by multiple way..
    you can have selection screen and field with date .. and restrict based on system current date and 12 months before or you can handle this at your target.. .. I mean there are multiple ways to restrict data by date range..
    for some more hints..
    http://www.forumtopics.com/busobj/viewtopic.php?t=34393&sid=7fba465d0463bf7ff5ec46c128754ed6
    http://businessintelligence.ittoolbox.com/groups/technical-functional/cognos8-l/how-to-display-last-12-months-in-report-based-on-todays-date-3231850
    http://scn.sap.com/thread/3217381
    search on SDN you will get many other ways..
    Thanks,
    Bhupesh

  • BC Ecommerce SOAP Error: Server did not recognize the value of HTTP Header SOAPAction

    I am trying to add a product to an ecommerce site with this soap action: Product_UpdateInsert
    I have followed this very brief instruction: https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx?op=Product_UpdateInsert
    I have a html page in a secure area with a jQuery ajax soap script.
    I get the this error when I run the script:
    <?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><soap:Fault><faultcode>soap:Client</faultcode><faultstring>Server did not recognize the value of HTTP Header SOAPAction: https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice/Product_UpdateInsert.</faultstring><detail /></soap:Fault></soap:Body></soap:Envelope>
    I have also tried to add a header with the Soap action with the beforeSend in the ajax call.
    This must have been solved before I suppose?
    Here is my script:
    <!DOCTYPE html>
    <html lang="en">
    <head>
    <title>Test SOAP Request</title>
        <script type="text/javascript" src="//code.jquery.com/jquery-1.10.2.min.js"></script>
        <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/jquery-cookie/1.3.1/jquery.cookie.min.js"></script>
        <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/underscore.js/1.5.1/underscore-min.js"></script>
        <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/backbone.js/1.0.0/backbone-min.js"></script>
        <script type="text/javascript" src="//cdn.worldsecuresystems.com/bcapi/bcapi-0.0.1.min.js"></script>
    </head>
    <body>
    <script>
    var wsUrl = "https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx";
    var soapRequest =
    '<?xml version="1.0" encoding="utf-8"?> \
    <soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope"> \
      <soap12:Body> \
        <Product_UpdateInsert xmlns="https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice"> \
          <username>myEmailAdress</username> \
          <password>mySecretPassw</password> \
          <siteId>1894001</siteId> \
          <productList> \
            <Products> \
              <productCode>ZJAWEyuuyN</productCode> \
              <productName>My test product</productName> \
              <description>Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.</description> \
              <smallImage>/images/product1/small.jpg</smallImage> \
              <largeImage>/images/product1/large.jpg</largeImage> \
             <cataloguesArray> \
                 <string>/Store/</string> \
              </cataloguesArray> \
              <pricesSaleArray> \
                <string>US/19.95,3/17.96,7/16.96</string> \
              </pricesSaleArray> \
              <pricesRetailArray> \
                <string>US/20,5/19,8/20</string> \
              </pricesRetailArray> \
              <pricesWholesaleArray> \
                <string>US/20,5/19,8/20</string> \
              </pricesWholesaleArray> \
              <wholesaleTaxCodeArray> \
                <string>US/0.00</string> \
              </wholesaleTaxCodeArray> \
              <taxCodeArray> \
                <string>GB/VAT</string> \
              </taxCodeArray> \
              <groupProducts> \
                <string>580H0036BL</string> \
                <string>ACAI60</string> \
                <string>ABC-123</string> \
              </groupProducts> \
              <groupProductsDescriptions> \
                <string>Lorem ipsum dolor sit amet</string> \
                <string>consectetur adipisicing elit</string> \
              </groupProductsDescriptions> \
              <supplierEntityId>1234</supplierEntityId> \
              <supplierCommission>0</supplierCommission> \
              <weight>30</weight> \
              <tags>NEW!</tags> \
              <unitType>string</unitType> \
              <minUnits>0</minUnits> \
              <maxUnits>2</maxUnits> \
              <inStock>43</inStock> \
              <onOrder>3</onOrder> \
              <reOrder>2</reOrder> \
              <inventoryControl>true</inventoryControl> \
              <canPreOrder>true</canPreOrder> \
              <custom1>Text in custom field 1</custom1> \
              <custom2>Text in custom field 2</custom2> \
              <custom3>Text in custom field 3</custom3> \
              <custom4>Text in custom field 4</custom4> \
              <popletImages>/images/image1.jpg;/images/image2.jpg;</popletImages> \
              <enabled>true</enabled> \
              <deleted>false</deleted> \
              <captureDetails>true</captureDetails> \
              <downloadLimitCount>20</downloadLimitCount> \
              <limitDownloadsToIP>0</limitDownloadsToIP> \
              <isOnSale>true</isOnSale> \
              <hideIfNoStock>true</hideIfNoStock> \
              <productAttributes>Size*|5|Y:L||UK/2|US/20,S||UK/1|US/10</productAttributes> \
              <isGiftVoucher>false</isGiftVoucher> \
              <enableDropShipping>true</enableDropShipping> \
              <productWeight>0</productWeight> \
              <productWidth>0</productWidth> \
              <productHeight>0</productHeight> \
              <productDepth>0</productDepth> \
              <excludeFromSearch>false</excludeFromSearch> \
              <productTitle>My product title</productTitle> \
              <cycletypeId>3</cycletypeId> \
              <cycletypeCount>-1</cycletypeCount> \
              <slug>my-product</slug> \
              <hasVariations>true</hasVariations> \
              <variations> \
                <ProductVariation xsi:nil="true" /> \
                <ProductVariation xsi:nil="true" /> \
              </variations> \
            </Products> \
          </productList> \
        </Product_UpdateInsert> \
      </soap12:Body> \
    </soap12:Envelope>';
    $.ajax({
         type: "POST",
         beforeSend: function(xhr){xhr.setRequestHeader('SOAPAction', 'https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice/Product_UpdateInsert');},
         url: wsUrl,
         contentType: "text/xml",
         dataType: "xml",
         data: soapRequest,
         success: processSuccess,
         error: processError
    function processSuccess(data, status, req)
       if (status == "success")
       alert("Success!");
    function processError(data, status, req)
       alert("Failed!");
       alert(req.responseText + " " + status);
    </script>
    </body>
    </html>

    This line is a target namespace so it should not be changed: <Product_Retrieve xmlns="http://tempuri.org/CatalystDeveloperService/CatalystEcommerceWebservice"> It is very easy to think that it's a placeholder and that it should be replaced with your own url, which it should not and which will fail.
    This works now:
    <!DOCTYPE html>
    <html lang="en">
        <head>
            <title>Test 7 SOAP Request</title>
            <script type="text/javascript" src="//code.jquery.com/jquery-1.10.2.min.js"></script>
        </head>
        <body>
            <script>    
                var SoapMessage = '<?xml version="1.0" encoding="utf-8"?> \
    <soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope"> \
    <soap12:Body> \
    <Product_Retrieve xmlns="http://tempuri.org/CatalystDeveloperService/CatalystEcommerceWebservice"> \
    <username>Your Email</username> \
    <password>Your password</password> \
    <siteId>1894001</siteId> \
    <productCode>HHKDKXS5MB</productCode> \
                </Product_Retrieve> \
                </soap12:Body> \
                </soap12:Envelope>';
                var url = "https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx";
                $.support.cors = true;
                $.ajax({
                    type: "POST",
                    url: url,
                    data: SoapMessage,
                    dataType: "xml",
                    processData: true,
                    contentType: "text/xml; charset=\"utf-8\"",
                    success: function (msg) {
                        alert("suc: " + msg);
                    error: function (msg) {
                        alert("Failed: " + msg);
            </script>
        </body>
    </html>   

  • In smartforms the quantity field is not showing the perfect value .

    In smartforms the quantity field is not showing the perfect value because the point is shifting left
    insted of showing 8.10 it is showing 80.00.

    Hi,
    Dont use the quantity field same as that it come from interface Fm declare one field for quantity in the global settings and write the logic to pass the value to that field and pass that global value to the particular texts...same is the case with currency fields also.
    Regards,
    Rohan.

Maybe you are looking for